ALCATEL-IND1-MLD-MIB

All MIBs › ALCATEL-IND1-MLD-MIB

Organization: Alcatel-Lucent

Last Updated: 2011-02-23

Category: Routing Protocols, Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch MLD snooping and querier MIB for managing IPv6 multicast group membership on VLANs.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-MLD-MIB?

ALCATEL-IND1-MLD-MIB is an Alcatel-Lucent OmniSwitch proprietary MIB for Multicast Listener Discovery (MLD) snooping and querier functionality, managing IPv6 multicast group membership on VLANs. It exposes per-VLAN MLD status and mode settings including querying, spoofing, zapping (fast-leave), proxying, MLD protocol version, robustness variable, query and query-response intervals, and router/source timeout values. Its monitoring focus is software/protocol status for IPv6 multicast delivery: administrators check whether MLD snooping/querying is enabled per VLAN and whether timers are within expected ranges, helping diagnose IPv6 multicast video/streaming failures caused by group membership timing out prematurely. It is built directly on the IETF MLD/MLDv2 protocol standard as its underlying reference rather than being purely proprietary. It is deployed on OmniSwitch switches in IPv6-enabled networks delivering multicast applications such as IPTV. Engineers can download the ALCATEL-IND1-MLD-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-MLD-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel-Lucent Enterprise OmniSwitch switches

Monitoring Examples

An operator would poll alaMldStatus and alaMldQuerying per alaMldVlan to confirm MLD snooping and querier functions are enabled on a given VLAN, and check alaMldVersion against the expected deployment. Monitoring alaMldQueryInterval, alaMldQueryResponseInterval, alaMldRouterTimeout, and alaMldSourceTimeout would reveal whether membership timeouts are misconfigured, causing multicast receivers to be dropped prematurely. If alaMldZapping (fast-leave) is unexpectedly enabled, channel-change behavior for IPTV would differ from standard leave processing, which this object would surface.

What Can Be Monitored

per-VLAN MLD snooping/querier status
MLD protocol version
query and query-response intervals
router and source timeout values
fast-leave (zapping) status

Imported Objects

From ALCATEL-IND1-BASE

softentIND1Mld

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From INET-ADDRESS-MIB

InetAddress
InetAddressIPv6
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

RowStatus

How to Use in IPNetwork Monitor

Example using alaMldMemberCount OID:

Select an Alcatel-Lucent Enterprise OmniSwitch switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type alaMldMemberCount into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The group membership request's counter. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
alaMld	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.1
alaMldCompliance	1.3.6.1.4.1.6486.801.1.2.1.35.1.2.1.1			The compliance statement for systems running IPv6 multicast switch and routing and implementing ALCATEL-IND1-MLD-MIB.
INT alaMldFloodUnknown	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.1.17	INTEGER	read-write	Administratively enable flooding of multicast data packets during flow learning and setup.
alaMldForward	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.10
ADR alaMldForwardDestAddress	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.10.1.1.5	InetAddressIPv6	not-accessible	The IP multicast forwarded flow's IPv6 tunnel destination address.
alaMldForwardEntry	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.10.1.1		not-accessible	An entry corresponding to an IP multicast forwarded flow.
alaMldForwardGroup	1.3.6.1.4.1.6486.801.1.2.1.35.1.2.2.10			A collection of objects to support IPv6 multicast switching and routing IP multicast forward information.
ADR alaMldForwardGroupAddress	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.10.1.1.3	InetAddressIPv6	not-accessible	The IP multicast forwarded flow's IPv6 group address.
ADR alaMldForwardHostAddress	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.10.1.1.4	InetAddressIPv6	not-accessible	The IP multicast forwarded flow's IPv6 host address.
NUM alaMldForwardIfIndex	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.10.1.1.2	InterfaceIndex	read-only	The IP multicast forwarded flow's ifIndex.
NUM alaMldForwardNextIfIndex	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.10.1.1.9	InterfaceIndex	not-accessible	The IP multicast forwarded flow's next ifIndex.
INT alaMldForwardNextType	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.10.1.1.10	INTEGER	read-only	The IP multicast forwarded flow's next encapsulation type.
U32 alaMldForwardNextVlan	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.10.1.1.8	Unsigned32	not-accessible	The IP multicast forwarded flow's next VLAN.
ADR alaMldForwardOrigAddress	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.10.1.1.6	InetAddressIPv6	not-accessible	The IP multicast forwarded flow's IPv6 tunnel source address.
alaMldForwardTable	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.10.1		not-accessible	The table listing the IP multicast forward information.
INT alaMldForwardType	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.10.1.1.7	INTEGER	read-only	The IP multicast forwarded flow's encapsulation type.
U32 alaMldForwardVlan	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.10.1.1.1	Unsigned32	not-accessible	The IP multicast forwarded flow's VLAN.
alaMldGroup	1.3.6.1.4.1.6486.801.1.2.1.35.1.2.2.1			A collection of objects to support management of IPv6 multicast switching and routing system configuration.
IP alaMldHelperAddress	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.1.19	InetAddress	read-write	The configured IPv6 helper address. When an MLD report or leave is received by the device it will remove the IP header and regenerate a new IP header with a destination IP address specified. Use :: to no longer help an MLD report to an remote address. Must be set at the same time as alaMldHelperAddressType
IPt alaMldHelperAddressType	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.1.18	InetAddressType	read-write	Set the address type of the helper address. Must be ipv4(1) and set at the same time as alaMldHelperAddress.
U32 alaMldLastMemberQueryInterval	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.1.9	Unsigned32	read-write	Set the MLD Last Member Query Interval on the system.
INT alaMldMaxGroupExceedAction	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.1.16	INTEGER	read-write	The global configuration of action to be taken when MLD group membership limit is exceeded on a port/vlan instance.
U32 alaMldMaxGroupLimit	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.1.15	Unsigned32	read-write	The global limit on maximum number of MLD Group memberships that can be learnt on each port/vlan instance.
alaMldMember	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.3
C32 alaMldMemberCountEx	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.3.1.1.6	Counter32	read-only	The group membership request's counter.
alaMldMemberEntry	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.3.1.1		not-accessible	An entry corresponding to an MLD group membership request.
alaMldMemberGroup	1.3.6.1.4.1.6486.801.1.2.1.35.1.2.2.3			A collection of objects to support IPv6 multicast switching and routing group membership information.
ADR alaMldMemberGroupAddress	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.3.1.1.3	InetAddressIPv6	not-accessible	The group membership request's IPv6 group address.
NUM alaMldMemberIfIndex	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.3.1.1.2	InterfaceIndex	not-accessible	The group membership request's ifIndex.
INT alaMldMemberMode	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.3.1.1.5	INTEGER	read-only	The group membership request's MLD source filter mode.
ADR alaMldMemberSourceAddress	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.3.1.1.4	InetAddressIPv6	not-accessible	The group membership request's IPv6 source address.
alaMldMemberTable	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.3.1		not-accessible	The table listing the MLD group membership information.
TIK alaMldMemberTimeout	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.3.1.1.7	TimeTicks	read-only	The group membership request's timeout.
U32 alaMldMemberVlan	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.3.1.1.1	Unsigned32	not-accessible	The group membership request's VLAN.
alaMldNeighbor	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.5
C32 alaMldNeighborCount	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.5.1.1.4	Counter32	read-only	The IP multicast router's counter.
alaMldNeighborEntry	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.5.1.1		not-accessible	An entry corresponding to an IP multicast router.
alaMldNeighborGroup	1.3.6.1.4.1.6486.801.1.2.1.35.1.2.2.5			A collection of objects to support IPv6 multicast switching and routing IP multicast router information.
ADR alaMldNeighborHostAddress	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.5.1.1.3	InetAddressIPv6	not-accessible	The IP multicast router's IPv6 host address.
NUM alaMldNeighborIfIndex	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.5.1.1.2	InterfaceIndex	not-accessible	The IP multicast router's ifIndex.
alaMldNeighborTable	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.5.1		not-accessible	The table listing the neighboring IP multicast routers.
TIK alaMldNeighborTimeout	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.5.1.1.5	TimeTicks	read-only	The IP multicast router's timeout.
U32 alaMldNeighborVlan	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.5.1.1.1	Unsigned32	not-accessible	The IP multicast router's VLAN.
alaMldPort	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.12
alaMldPortEntry	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.12.1.1		not-accessible	An entry corresponding to IPv6 Multicast port information.
alaMldPortGroup	1.3.6.1.4.1.6486.801.1.2.1.35.1.2.2.12			A collection of objects to support IPv6 multicast switching configuration.
NUM alaMldPortIfIndex	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.12.1.1.1	InterfaceIndex	not-accessible	The IP multicast port's ifIndex.
INT alaMldPortMaxGroupExceedAction	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.12.1.1.3	INTEGER	read-write	The action to be taken when MLD group membership limit is exceeded for the interface.
U32 alaMldPortMaxGroupLimit	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.12.1.1.2	Unsigned32	read-write	The maximum number of MLD Group memberships that can be learnt on the interface.
alaMldPortTable	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.12.1		not-accessible	The table listing the IPv6 Multicast port information.
alaMldPortVlan	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.13
U32 alaMldPortVlanCurrentGroupCount	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.13.1.1.2	Unsigned32	read-only	The current IPv6 multicast group memberships on a port/vlan instance.
alaMldPortVlanEntry	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.13.1.1		not-accessible	An entry corresponding to MLD group membership limit on a port/vlan.
alaMldPortVlanGroup	1.3.6.1.4.1.6486.801.1.2.1.35.1.2.2.13			An object to support IPv6 multicast switching group limit information for a port/vlan instance.
INT alaMldPortVlanMaxGroupExceedAction	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.13.1.1.4	INTEGER	read-only	The action to be taken when MLD group membership limit is exceeded for the port/vlan instance.
U32 alaMldPortVlanMaxGroupLimit	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.13.1.1.3	Unsigned32	read-only	Maximum MLD Group memberships on the port/vlan instance.
alaMldPortVlanTable	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.13.1		not-accessible	The table listing the MLD group membership limit information for a port/vlan instance.
INT alaMldProxying	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.1.12	INTEGER	read-write	Administratively enable MLD Proxying on the system.
alaMldQuerier	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.7
C32 alaMldQuerierCount	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.7.1.1.4	Counter32	read-only	The MLD querier's counter.
alaMldQuerierEntry	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.7.1.1		not-accessible	An entry corresponding to an MLD querier.
INT alaMldQuerierForwarding	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.1.14	INTEGER	read-write	Administratively enable MLD Querier Forwarding on the system.
alaMldQuerierGroup	1.3.6.1.4.1.6486.801.1.2.1.35.1.2.2.7			A collection of objects to support IPv6 multicast switching and routing MLD querier information.
ADR alaMldQuerierHostAddress	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.7.1.1.3	InetAddressIPv6	not-accessible	The MLD querier's IPv6 host address.
NUM alaMldQuerierIfIndex	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.7.1.1.2	InterfaceIndex	not-accessible	The MLD querier's ifIndex.
alaMldQuerierTable	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.7.1		not-accessible	The table listing the neighboring MLD queriers.
TIK alaMldQuerierTimeout	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.7.1.1.5	TimeTicks	read-only	The MLD querier's timeout.
U32 alaMldQuerierVlan	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.7.1.1.1	Unsigned32	not-accessible	The MLD querier's VLAN.
INT alaMldQuerying	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.1.2	INTEGER	read-write	Administratively enable MLD Querying on the system.
U32 alaMldQueryInterval	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.1.7	Unsigned32	read-write	Set the MLD Query Interval used on the system.
U32 alaMldQueryResponseInterval	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.1.8	Unsigned32	read-write	Set the MLD Query Response Interval on the system.
U32 alaMldRobustness	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.1.6	Unsigned32	read-write	Set the MLD Robustness variable used on the system.
U32 alaMldRouterTimeout	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.1.10	Unsigned32	read-write	The MLD Router Timeout on the system.
alaMldSource	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.9
ADR alaMldSourceDestAddress	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.9.1.1.5	InetAddressIPv6	not-accessible	The IP multicast source flow's IPv6 tunnel destination address.
alaMldSourceEntry	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.9.1.1		not-accessible	An entry corresponding to an IP multicast source flow.
alaMldSourceGroup	1.3.6.1.4.1.6486.801.1.2.1.35.1.2.2.9			A collection of objects to support IPv6 multicast switching and routing IP multicast source information.
ADR alaMldSourceGroupAddress	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.9.1.1.3	InetAddressIPv6	not-accessible	The IP multicast source flow's IPv6 group address.
ADR alaMldSourceHostAddress	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.9.1.1.4	InetAddressIPv6	not-accessible	The IP multicast source flow's IPv6 host address.
NUM alaMldSourceIfIndex	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.9.1.1.2	InterfaceIndex	read-only	The IP multicast source flow's ifIndex.
ADR alaMldSourceOrigAddress	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.9.1.1.6	InetAddressIPv6	not-accessible	The IP multicast source flow's IPv6 tunnel source address.
alaMldSourceTable	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.9.1		not-accessible	The table listing the IP multicast source information.
U32 alaMldSourceTimeout	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.1.11	Unsigned32	read-write	The MLD Source Timeout on the system.
INT alaMldSourceType	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.9.1.1.7	INTEGER	read-only	The IP multicast source flow's encapsulation type.
U32 alaMldSourceVlan	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.9.1.1.1	Unsigned32	not-accessible	The IP multicast source flow's VLAN.
INT alaMldSpoofing	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.1.3	INTEGER	read-write	Administratively enable MLD Spoofing on the system.
alaMldStaticMember	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.4
alaMldStaticMemberEntry	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.4.1.1		not-accessible	An entry corresponding to a static MLD group membership request.
alaMldStaticMemberGroup	1.3.6.1.4.1.6486.801.1.2.1.35.1.2.2.4			A collection of objects to support IPv6 multicast switching and routing static group membership information tables.
ADR alaMldStaticMemberGroupAddress	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.4.1.1.3	InetAddressIPv6	not-accessible	The static group membership request's IPv6 group address.
NUM alaMldStaticMemberIfIndex	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.4.1.1.2	InterfaceIndex	not-accessible	The static group membership request's ifIndex.
ROW alaMldStaticMemberRowStatus	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.4.1.1.4	RowStatus	read-create	Used in accordance with installation and removal conventions for conceptual rows.
alaMldStaticMemberTable	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.4.1		not-accessible	The table listing the static MLD group membership information.
U32 alaMldStaticMemberVlan	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.4.1.1.1	Unsigned32	not-accessible	The static group membership request's VLAN.
alaMldStaticNeighbor	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.6
alaMldStaticNeighborEntry	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.6.1.1		not-accessible	An entry corresponding to a static IP multicast router.
alaMldStaticNeighborGroup	1.3.6.1.4.1.6486.801.1.2.1.35.1.2.2.6			A collection of objects to support IPv6 multicast switching and routing static IP multicast router information.
NUM alaMldStaticNeighborIfIndex	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.6.1.1.2	InterfaceIndex	not-accessible	The static IP multicast router's ifIndex.
ROW alaMldStaticNeighborRowStatus	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.6.1.1.3	RowStatus	read-create	Used in accordance with installation and removal conventions for conceptual rows.
alaMldStaticNeighborTable	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.6.1		not-accessible	The table listing the static IP multicast routers.
U32 alaMldStaticNeighborVlan	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.6.1.1.1	Unsigned32	not-accessible	The static IP multicast router's VLAN.
alaMldStaticQuerier	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.8
alaMldStaticQuerierEntry	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.8.1.1		not-accessible	An entry corresponding to a static MLD querier.
alaMldStaticQuerierGroup	1.3.6.1.4.1.6486.801.1.2.1.35.1.2.2.8			A collection of objects to support IPv6 multicast switching and routing static MLD querier information.
NUM alaMldStaticQuerierIfIndex	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.8.1.1.2	InterfaceIndex	not-accessible	The static MLD querier's ifIndex.
ROW alaMldStaticQuerierRowStatus	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.8.1.1.3	RowStatus	read-create	Used in accordance with installation and removal conventions for conceptual rows.
alaMldStaticQuerierTable	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.8.1		not-accessible	The table listing the static MLD queriers.
U32 alaMldStaticQuerierVlan	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.8.1.1.1	Unsigned32	not-accessible	The static MLD querier's VLAN.
INT alaMldStatus	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.1.1	INTEGER	read-write	Administratively enable IPv6 multicast switching and routing on the system.
alaMldTunnel	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.11
ADR alaMldTunnelDestAddress	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.11.1.1.5	InetAddressIPv6	not-accessible	The IP multicast tunneled flow's IPv6 tunnel destination address.
alaMldTunnelEntry	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.11.1.1		not-accessible	An entry corresponding to an IP multicast tunneled flow.
alaMldTunnelGroup	1.3.6.1.4.1.6486.801.1.2.1.35.1.2.2.11			A collection of objects to support IPv6 multicast switching and routing IP multicast tunnel information.
ADR alaMldTunnelGroupAddress	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.11.1.1.3	InetAddressIPv6	not-accessible	The IP multicast tunneled flow's IPv6 group address.
ADR alaMldTunnelHostAddress	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.11.1.1.4	InetAddressIPv6	not-accessible	The IP multicast tunneled flow's IPv6 host address.
NUM alaMldTunnelIfIndex	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.11.1.1.2	InterfaceIndex	read-only	The IP multicast tunneled flow's ifIndex.
ADR alaMldTunnelNextDestAddress	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.11.1.1.8	InetAddressIPv6	not-accessible	The IP multicast tunneled flow's next IPv6 tunnel destination address.
INT alaMldTunnelNextType	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.11.1.1.9	INTEGER	read-only	The IP multicast tunneled flow's next encapsulation type.
ADR alaMldTunnelOrigAddress	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.11.1.1.6	InetAddressIPv6	not-accessible	The IP multicast tunneled flow's IPv6 tunnel source address.
alaMldTunnelTable	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.11.1		not-accessible	The table listing the IP multicast tunnel information.
INT alaMldTunnelType	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.11.1.1.7	INTEGER	read-only	The IP multicast tunneled flow's encapsulation type.
U32 alaMldTunnelVlan	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.11.1.1.1	Unsigned32	not-accessible	The IP multicast tunneled flow's VLAN.
U32 alaMldUnsolicitedReportInterval	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.1.13	Unsigned32	read-write	The MLD Unsolicited Report Interval on the system.
U32 alaMldVersion	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.1.5	Unsigned32	read-write	Set the default MLD protocol Version running on the system.
alaMldVlan	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.2
alaMldVlanEntry	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.2.1.1		not-accessible	An entry corresponds to a VLAN on which IPv6 multicast switching and routing is configured.
alaMldVlanGroup	1.3.6.1.4.1.6486.801.1.2.1.35.1.2.2.2			A collection of objects to support management of IPv6 multicast switching and routing vlan configuration.
U32 alaMldVlanId	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.13.1.1.1	Unsigned32	not-accessible	The IPv6 multicast group membership VLAN.
U32 alaMldVlanIndex	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.2.1.1.1	Unsigned32	not-accessible	The VLAN on which IPv6 multicast switching and routing is configured.
U32 alaMldVlanLastMemberQueryInterval	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.2.1.1.10	Unsigned32	read-write	Set the MLD Last Member Query Interval on the VLAN.
INT alaMldVlanMaxGroupExceedAction	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.2.1.1.17	INTEGER	read-write	The action to be taken when the MLD group membership limit is exceeded on the VLAN.
U32 alaMldVlanMaxGroupLimit	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.2.1.1.16	Unsigned32	read-write	The maximum number of MLD Group memberships that can be learnt on the VLAN.
INT alaMldVlanProxying	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.2.1.1.13	INTEGER	read-write	Administratively enable MLD Proxying on the VLAN.
INT alaMldVlanQuerierForwarding	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.2.1.1.15	INTEGER	read-write	Administratively enable MLD Querier Forwarding on the VLAN.
INT alaMldVlanQuerying	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.2.1.1.3	INTEGER	read-write	Administratively enable MLD Querying on the VLAN.
U32 alaMldVlanQueryInterval	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.2.1.1.8	Unsigned32	read-write	Set the MLD Query Interval used on the VLAN.
U32 alaMldVlanQueryResponseInterval	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.2.1.1.9	Unsigned32	read-write	Set the MLD Query Response Interval on the VLAN.
U32 alaMldVlanRobustness	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.2.1.1.7	Unsigned32	read-write	Set the MLD Robustness variable used on the VLAN.
U32 alaMldVlanRouterTimeout	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.2.1.1.11	Unsigned32	read-write	Set the MLD Router Timeout on the VLAN.
U32 alaMldVlanSourceTimeout	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.2.1.1.12	Unsigned32	read-write	Set the MLD Source Timeout on the VLAN.
INT alaMldVlanSpoofing	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.2.1.1.4	INTEGER	read-write	Administratively enable MLD Spoofing on the VLAN.
INT alaMldVlanStatus	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.2.1.1.2	INTEGER	read-write	Administratively enable IPv6 multicast switching and routing on the VLAN.
alaMldVlanTable	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.2.1		not-accessible	The VLAN table contains the information on which IPv6 multicast switching and routing is configured.
U32 alaMldVlanUnsolicitedReportInterval	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.2.1.1.14	Unsigned32	read-write	Set the MLD Unsolicited Report Interval on the VLAN.
U32 alaMldVlanVersion	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.2.1.1.6	Unsigned32	read-write	Set the default MLD protocol Version running on the VLAN.
INT alaMldVlanZapping	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.2.1.1.5	INTEGER	read-write	Administratively enable MLD Zapping on the VLAN.
INT alaMldVlanZeroBasedQuery	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.2.1.1.18	INTEGER	read-write	Administratively enable the use of an all-zero source IPv6 address for query packets when a non-querier is querying the membership of a port on the VLAN
INT alaMldZapping	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.1.4	INTEGER	read-write	Administratively enable MLD Zapping on the system.
INT alaMldZeroBasedQuery	1.3.6.1.4.1.6486.801.1.2.1.35.1.1.1.20	INTEGER	read-write	Administratively enable the use of an all-zero source IPv6 address for query packets when a non-querier is querying the membership of a port
alcatelIND1MldMIB	1.3.6.1.4.1.6486.801.1.2.1.35.1			This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Proprietary IPv6 Multicast MIB definitions The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
alcatelIND1MldMIBCompliances	1.3.6.1.4.1.6486.801.1.2.1.35.1.2.1
alcatelIND1MldMIBConformance	1.3.6.1.4.1.6486.801.1.2.1.35.1.2
alcatelIND1MldMIBGroups	1.3.6.1.4.1.6486.801.1.2.1.35.1.2.2
alcatelIND1MldMIBObjects	1.3.6.1.4.1.6486.801.1.2.1.35.1.1

RFC description

Proprietary IPv6 Multicast Listener Discovery (MLD) management definitions for Alcatel-Lucent enterprise networks.

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-MLD-MIB