ALCATEL-IND1-IPRMV6-MIB

All MIBs › ALCATEL-IND1-IPRMV6-MIB

Organization: Alcatel-Lucent

Last Updated: 2013-07-26

Category: Routing Protocols, Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch IPv6 route manager MIB for managing IPv6 route redistribution, preferences, and route parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-IPRMV6-MIB?

ALCATEL-IND1-IPRMV6-MIB is an Alcatel-Lucent Enterprise proprietary MIB for the OmniSwitch "Birds Of Prey" product line's IPv6 Route Manager (IPRMv6), which manages the switch's IPv6 routing table and static route configuration. It exposes a route table listing each IPv6 destination prefix, prefix length, next hop, source protocol, ingress interface, and metric, plus route validity, along with a separate static route table for administratively configured IPv6 routes. For device status monitoring it lets an administrator verify that expected IPv6 routes are present and valid, check which routing protocol installed a given route, and confirm static routes are correctly configured, which helps diagnose IPv6 reachability problems or unexpected route withdrawal. It complements standard IPv6 routing MIBs (e.g., IP-FORWARD-MIB) with Alcatel-specific route management objects. It is typically deployed on Alcatel-Lucent OmniSwitch routers/switches running dual-stack or IPv6-only routing in enterprise and data center networks, where administrators can perform an ALCATEL-IND1-IPRMV6-MIB download to load the module directly into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-IPRMV6-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel-Lucent OmniSwitch (Birds Of Prey product line) router/switch

Monitoring Examples

An administrator would walk alaIprmV6RouteTable/alaIprmV6RouteEntry to check alaIprmV6RouteValid and alaIprmV6RouteNextHop for a specific alaIprmV6RouteDest/alaIprmV6RoutePfxLength, confirming the route is active and pointing to the correct next hop, and cross-check alaIprmV6StaticRouteTable to verify manually configured routes match intent. A route showing alaIprmV6RouteValid as false, or missing entirely from the table, would indicate an IPv6 reachability problem such as a withdrawn or failed route.

What Can Be Monitored

IPv6 route destination and next hop
route validity state
routing protocol source per route
static IPv6 route configuration
route metric

Imported Objects

From ALCATEL-IND1-BASE

routingIND1Iprm

OBJECT-IDENTITY

From IANA-RTPROTO-MIB

IANAipRouteProtocol

From IPV6-TC

Ipv6Address
Ipv6IfIndex

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
alcatelIND1IPRMV6MIB	1.3.6.1.4.1.6486.801.1.2.1.10.2.2			This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This proprietary MIB contains management information for the configuration of IPRMv6 global configuration parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2010 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
alcatelIND1IPRMV6MIBObjects	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1
alaIprmV6Config	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1
alaIprmV6RouteTable	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.1		not-accessible	IPRM's IPv6 Routing table. This table contains an entry for each valid IPv6 unicast route that can be used for packet forwarding determination. It is for display purposes only.
alaIprmV6RouteEntry	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.1.1		not-accessible	A routing entry.
ADR alaIprmV6RouteDest	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.1.1.1	Ipv6Address	not-accessible	The destination IPv6 address of this route.
I32 alaIprmV6RoutePfxLength	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.1.1.2	Integer32	not-accessible	Indicates the prefix length of the destination address.
ADR alaIprmV6RouteNextHop	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.1.1.3	Ipv6Address	not-accessible	On remote routes, the address of the next system en route; otherwise, ::0 ('00000000000000000000000000000000'H in ASN.1 string representation).
IAN alaIprmV6RouteProtocol	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.1.1.4	IANAipRouteProtocol	not-accessible	The protocol that this route was learned from
IPV alaIprmV6RouteIfIndex	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.1.1.5	Ipv6IfIndex	not-accessible	The index value which uniquely identifies the local interface through which the next hop of this route should be reached.
U32 alaIprmV6RouteMetric	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.1.1.6	Unsigned32	read-only	The routing metric for this route. The semantics of this metric are determined by the routing protocol specified in the route's ipv6RouteProtocol value.
T/F alaIprmV6RouteValid	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.1.1.7	TruthValue	read-only	If this value is true(1) IPRM believes the route is being used. If this value is false(2), the route is currently not being used and is considered a backup route.
alaIprmV6StaticRouteTable	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.2		not-accessible	Table allowing the creation and removal of IPv6 Static Routes.
alaIprmV6StaticRouteEntry	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.2.1		not-accessible	An IPv6 static route entered by the user
ADR alaIprmV6StaticRouteDest	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.2.1.1	Ipv6Address	not-accessible	The destination IPv6 address of this static route. This object may not take a multicast address value.
I32 alaIprmV6StaticRoutePfxLength	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.2.1.2	Integer32	not-accessible	Indicates the prefix length of the destination address.
ADR alaIprmV6StaticRouteNextHop	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.2.1.3	Ipv6Address	not-accessible	The IPv6 address of the next hop towards the destination.
IPV alaIprmV6StaticRouteIfIndex	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.2.1.4	Ipv6IfIndex	not-accessible	The index value which uniquely identifies the local interface through which the next hop of this route should be reached.
U32 alaIprmV6StaticRouteMetric	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.2.1.5	Unsigned32	read-create	The routing metric for this route. The lower the value, the higher the priority for the static route.
ROW alaIprmV6StaticRouteStatus	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.2.1.6	RowStatus	read-create	Used to control the addition and removal of static routes.
U32 alaIprmV6StaticRouteTag	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.2.1.7	Unsigned32	read-create	Tag associated with route.
STR alaIprmV6StaticRouteName	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.2.1.8	SnmpAdminString	read-create	A comment associated with the static route.
alaIprmV6RtPrefTable	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.3		not-accessible	This table specifies the route preference values for various types of IPv6 routes handled by IPRM.
alaIprmV6RtPrefTableEntry	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.3.1		not-accessible	An entry is in this table for each IPv6 route preference type.
ALA alaIprmV6RtPrefEntryType	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.3.1.1	AlaIprmV6RtPrefType	not-accessible	The type of route (associated with a route preference value)
I32 alaIprmV6RtPrefEntryValue	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.1.1.3.1.2	Integer32	read-write	The route preference value used for this type of route.
alcatelIND1IPRMV6MIBConformance	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.2
alcatelIND1IPRMV6MIBCompliances	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.2.1
alaIprmV6Compliance	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.2.1.1			The compliance statement for routers running IPRM and implementing the ALCATEL-IND1-IPRMV6 MIB.
alcatelIND1IPRMV6MIBGroups	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.2.2
alaIprmV6ConfigMIBGroup	1.3.6.1.4.1.6486.801.1.2.1.10.2.2.2.2.1			A collection of objects to support management of global configuration parameters of the IPRM Module supporting IPv6 routes.

RFC description

IPv6 routing protocol management for Alcatel-Lucent devices with global configuration parameters.

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-IPRMV6-MIB

What Is ALCATEL-IND1-IPRMV6-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description