ALCATEL-IND1-GVRP-MIB

All MIBs › ALCATEL-IND1-GVRP-MIB

Organization: Alcatel - Architects Of An Internet World

Last Updated: 2010-05-13

Category: VLAN and Bridging, Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch GARP VLAN Registration Protocol MIB for dynamic VLAN propagation and registration management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-GVRP-MIB?

ALCATEL-IND1-GVRP-MIB is an Alcatel (Birds Of Prey product line, built on ALCATEL-IND1-BASE/ALCATEL-IND1-VLAN-STP-MIB) proprietary MIB configuring GVRP (GARP VLAN Registration Protocol) for automatic VLAN-membership distribution. Its objects cover a global clear-stats action, a transparent-switching flag, a max-VLAN limit, and a per-port config table (registrar/applicant mode, restricted/allowed/current registration and applicant bitmaps, static-VLAN registration learn/restrict settings, join/leave/leave-all timers, provider BPDU MAC), plus a per-port stats table (join-empty-received counter). As a configuration/performance MIB it lets an administrator confirm GVRP registrar/applicant mode and VLAN-propagation timers per port on an Alcatel switch. It is deployed on Alcatel (Birds Of Prey) switching equipment. Engineers can download the ALCATEL-IND1-GVRP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-GVRP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel (Birds Of Prey) switching equipment

Monitoring Examples

An administrator checks alaGvrpPortConfigRegistrarMode and alaGvrpPortConfigJoinTimer to confirm GVRP VLAN-propagation behavior on an Alcatel switch port.

What Can Be Monitored

GVRP registrar/applicant mode and VLAN-propagation timers

Imported Objects

From ALCATEL-IND1-BASE

softentIND1Gvrp

OBJECT-IDENTITY

From ALCATEL-IND1-VLAN-STP-MIB

VlanBitmap

From IF-MIB

InterfaceIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32

How to Use in IPNetwork Monitor

Example using alaGvrpPortStatsJoinEmptyReceived OID:

Select an Alcatel-Lucent Enterprise OmniSwitch switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type alaGvrpPortStatsJoinEmptyReceived into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of Join Empty messages received. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
alcatelIND1GVRPMIB	1.3.6.1.4.1.6486.801.1.2.1.36.1			This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line GVRP for the distribution of VLAN configuration information. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
alcatelIND1GVRPMIBNotifications	1.3.6.1.4.1.6486.801.1.2.1.36.1.0			Branch For GVRP MIB Subsystem Notifications.
NTF gvrpVlanLimitReachedEvent	1.3.6.1.4.1.6486.801.1.2.1.36.1.0.1			The number of vlans learnt dynamically by GVRP has reached a configured limit. Notify the management entity with number of vlans learnt dynamically by GVRP and the configured GVRP vlan limit.
alcatelIND1GVRPMIBObjects	1.3.6.1.4.1.6486.801.1.2.1.36.1.1			Branch For GVRP Subsystem Managed Objects.
INT alaGvrpGlobalClearStats	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.1	INTEGER	read-write	Defines the global clear statistics control for GVRP. The value reset (1) indicates that GVRP should clear all statistic counters related to all ports in the system. By default, this object contains a zero value.
INT alaGvrpTransparentSwitching	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.2	INTEGER	read-write	Defines the behavior when GVRP is globally disabled on a device. The value enabled (1) indicates that device behaves like a GVRP transparent device and the GVRP frames will be flooded transparently. Value disabled (2) disabled indicates that the device will not flood GVRP frames and will simply discard the received GVRP frames.
I32 alaGvrpMaxVlanLimit	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.3	Integer32	read-write	Defines the maximum number of dynamic VLANs that can be created on the system by GVRP. If the number of VLANs created by GVRP reaches this limit, the system will gradually prevent GVRP from creating additional VLANs.
gvrpPortConfig	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.4
alaGvrpPortConfigTable	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.4.1		not-accessible	A table containing GVRP port configuration information.
alaGvrpPortConfigEntry	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.4.1.1		not-accessible	A GVRP port configuration entry.
NUM alaGvrpPortConfigIfIndex	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.4.1.1.1	InterfaceIndex	not-accessible	The ifindex of the port on which GVRP is running
INT alaGvrpPortConfigRegistrarMode	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.4.1.1.2	INTEGER	read-write	Defines the mode of operation of all the registrar state machines associated to the port. normal - registration as well as de-registration of VLANs are allowed. fixed - A VLAN that was previously mapped onto such a port either dynamically or statically cannot be de-registered through GVRP. When the port registration mode is set to fixed, VLAN(s) can only be mapped onto such port statically. forbidden - dynamic VLAN registration or de-registration are not allowed on the port. NOTE: The registrar state machines for the default VLAN will operate in Fixed Registration Mode for all the ports on the switch.
INT alaGvrpPortConfigApplicantMode	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.4.1.1.3	INTEGER	read-write	Defines the mode of operation of all the applicant state machines associated to the port. participant - The state machines participates normally in GVRP protocol exchanges. non_participant - The state machines does not send any GVRP PDU(s). active - The state machines send GVRP frames even on ports that are in blocking state on the active spanning tree instance.
VLA alaGvrpPortConfigRestrictedRegistrationBitmap	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.4.1.1.4	VlanBitmap	read-write	An octet string of 4096 bits that defines the status of the restricted registration control for all VLAN(s) in the range from 1 to 4096. It defines whether VLAN(s) can be created in the system based on GVRP processing or only mapped to ports in case they have already been statically created in the system. The bitmap will only affect the GVRP processing if the Registrar Administrative Control alaGvrpPortConfigRegistrarMode value on the port is set normal registration (1). Each bit defines: 0= false, dynamic VLAN registration is not restricted 1= true, VLAN cannot be created in the system by GVRP processing. However, if this VLAN already exists in the system as a static VLAN, then it can be mapped to the receiving port
VLA alaGvrpPortConfigAllowRegistrationBitmap	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.4.1.1.5	VlanBitmap	read-write	An octet string of 4096 bits that defines the status of the restricted registration control for all VLAN(s) in the range from 1 to 4096. It defines whether VLAN(s) can be created in the system based on GVRP processing or only mapped to ports in case they have already been statically created in the system. The bitmap will only affect the GVRP processing if the Registrar Administrative Control alaGvrpPortConfigRegistrarMode value on the port is set normal registration (1). Each bit defines: 0= false, VLAN cannot be created in the system by GVRP processing. 1= true, dynamic VLAN registration is allowed However, if this VLAN already exists in the system as a static VLAN, then it can be mapped to the receiving port
VLA alaGvrpPortConfigRegistrationBitmap	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.4.1.1.6	VlanBitmap	read-only	An octet string of 4096 bits that defines the status of the restricted registration control for all VLAN(s) in the range from 1 to 4096. It defines whether VLAN(s) can be created in the system based on GVRP processing or only mapped to ports in case they have already been statically created in the system. The bitmap will only affect the GVRP processing if the Registrar Administrative Control alaGvrpPortConfigRegistrarMode value on the port is set normal registration (1). Each bit defines: 0= false, dynamic VLAN registration is not restricted 1= true, VLAN cannot be created in the system by GVRP processing. However, if this VLAN already exists in the system as a static VLAN, then it can be mapped to the receiving port
VLA alaGvrpPortConfigRestrictedApplicantBitmap	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.4.1.1.7	VlanBitmap	read-write	An octet string of 4096 bits that defines the status of the restricted applicant control for all VLAN(s) in the range from 1 to 4096. It defines whether VLAN(s) can be propagated in the system based on GVRP processing. The bitmap will only affect the GVRP processing if the Applicant Administrative Control alaGvrpPortConfigApplicantMode value on the port is set participant(1) or active (3). Each bit defines: 0= false, VLAN propagation is not restricted 1= true, VLAN cannot be propagated in the system by GVRP processing.
VLA alaGvrpPortConfigAllowApplicantBitmap	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.4.1.1.8	VlanBitmap	read-write	An octet string of 4096 bits that defines the status of the restricted applicant control for all VLAN(s) in the range from 1 to 4096. It defines whether VLAN(s) can be propagated in the system based on GVRP processing. The bitmap will only affect the GVRP processing if the Applicant Administrative Control alaGvrpPortConfigApplicantMode value on the port is set participant(1) or active (3). Each bit defines: 0= false, VLAN cannot be propagated in the system by GVRP processing 1= true, VLAN propagation is allowed.
VLA alaGvrpPortConfigApplicantBitmap	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.4.1.1.9	VlanBitmap	read-only	An octet string of 4096 bits that defines the status of the restricted applicant control for all VLAN(s) in the range from 1 to 4096. It defines whether VLAN(s) can be propagated in the system based on GVRP processing. The bitmap will only affect the GVRP processing if the Applicant Administrative Control alaGvrpPortConfigApplicantMode value on the port is set participant(1) or active (3). Each bit defines: 0= false, VLAN propagation is not restricted 1= true, VLAN cannot be propagated in the system by GVRP processing.
VLA alaGvrpPortConfigRegistrationToStaticVlanLearn	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.4.1.1.10	VlanBitmap	read-write	An octet string of 4096 bits that defines the status of the registration to static VLAN control for all VLAN(s) in the range from 1 to 4096. It defines whether ports can be mapped to statically configured VLAN(s) based on GVRP processing. The bitmap will only affect the GVRP processing if the Registrar Administrative Control alaGvrpPortConfigRegistrarMode value on the port is set to normal registration (1). Each bit defines: 0= restrict, port is not allowed to become member of VLAN. 1= learn, port is allowed to become member of corresponding VLAN
VLA alaGvrpPortConfigRegistrationToStaticVlanRestrict	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.4.1.1.11	VlanBitmap	read-write	An octet string of 4096 bits that defines the status of the registration to static VLAN control for all VLAN(s) in the range from 1 to 4096. It defines whether ports can be mapped to statically configured VLAN(s) based on GVRP processing. The bitmap will only affect the GVRP processing if the Registrar Administrative Control alaGvrpPortConfigRegistrarMode value on the port is set to normal registration (1). Each bit defines: 0= learn, port is allowed to become member of corresponding VLAN 1= restrict, port is not allowed to become member of VLAN.
VLA alaGvrpPortConfigRegistrationToStaticVlan	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.4.1.1.12	VlanBitmap	read-only	An octet string of 4096 bits that defines the status of the registration to static VLAN control for all VLAN(s) in the range from 1 to 4096. It defines whether ports can be mapped to statically configured VLAN(s) based on GVRP processing. The bitmap will only affect the GVRP processing if the Registrar Administrative Control alaGvrpPortConfigRegistrarMode value on the port is set to normal registration (1). Each bit defines: 0= learn, port is allowed to become member of corresponding VLAN 1= restrict, port is not allowed to become member of VLAN.
U32 alaGvrpPortConfigJoinTimer	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.4.1.1.13	Unsigned32	read-write	Maximum period of time that a GVRP instance waits before making declarations for VLANs.
U32 alaGvrpPortConfigLeaveTimer	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.4.1.1.14	Unsigned32	read-write	Period of time that a registrar state machine of a GVRP instance waits, after receiving a leave message on a port for a particular VLAN, to remove the registration of that VLAN on the port. The value for the Leave Timer must be greater than three times the value for the Join timer, i.e. Leave >= Join*3.
U32 alaGvrpPortConfigLeaveAllTimer	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.4.1.1.15	Unsigned32	read-write	Interval at which the Leave All state machine of a GVRP instance generates Leave All messages. A Leave All message instructs GVRP to modify the state of all VLANs registered on a port to Leaving. The value for the LeaveAll Timer must be greater than the value for the Leave timer, i.e. LeaveAll >= Leave.
INT alaGvrpPortConfigProviderBpduMac	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.4.1.1.16	INTEGER	read-write	Describes the treatment of gvrp frames ingressing on a gvrp enabled Vlan stacking network ports.If disabled provider gvrp frames with provider group address are processed on the port and if enabled provider gvrp frames with customer group address are processed on gvrp enabled vlan stacking network port.
gvrpPortStats	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.5
alaGvrpPortStatsTable	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.5.1		not-accessible	A table containing GVRP port statistics information.
alaGvrpPortStatsEntry	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.5.1.1		not-accessible	A GVRP port statistics entry.
NUM alaGvrpPortStatsIfIndex	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.5.1.1.1	InterfaceIndex	not-accessible	The ifindex of the port on which GVRP is running
C32 alaGvrpPortStatsJoinEmptyReceivedEx	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.5.1.1.2	Counter32	read-only	The number of Join Empty messages received.
C32 alaGvrpPortStatsJoinInReceived	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.5.1.1.3	Counter32	read-only	The number of Join In messages received.
C32 alaGvrpPortStatsEmptyReceived	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.5.1.1.4	Counter32	read-only	The number of Empty messages received.
C32 alaGvrpPortStatsLeaveInReceived	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.5.1.1.5	Counter32	read-only	The number of Leave In messages received.
C32 alaGvrpPortStatsLeaveEmptyReceived	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.5.1.1.6	Counter32	read-only	The number of Leave Empty messages received.
C32 alaGvrpPortStatsLeaveAllReceived	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.5.1.1.7	Counter32	read-only	The number of Leave all messages received.
C32 alaGvrpPortStatsJoinEmptyTransmitted	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.5.1.1.8	Counter32	read-only	The number of Join Empty messages transmitted.
C32 alaGvrpPortStatsJoinInTransmitted	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.5.1.1.9	Counter32	read-only	The number of Join In messages transmitted.
C32 alaGvrpPortStatsEmptyTransmitted	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.5.1.1.10	Counter32	read-only	The number of Empty messages transmitted.
C32 alaGvrpPortStatsLeaveInTransmitted	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.5.1.1.11	Counter32	read-only	The number of Leave In messages transmitted.
C32 alaGvrpPortStatsLeaveEmptyTransmitted	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.5.1.1.12	Counter32	read-only	The number of Leave Empty messages transmitted.
C32 alaGvrpPortStatsLeaveAllTransmitted	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.5.1.1.13	Counter32	read-only	The number of Leaveall messages transmitted.
C32 alaGvrpPortStatsTotalPDUReceived	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.5.1.1.14	Counter32	read-only	The total number of GVRP PDUs received.
C32 alaGvrpPortStatsTotalPDUTransmitted	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.5.1.1.15	Counter32	read-only	The total number of GVRP PDUs transmitted.
C32 alaGvrpPortStatsTotalMsgsReceived	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.5.1.1.16	Counter32	read-only	The total number of GVRP messages received.
C32 alaGvrpPortStatsTotalMsgsTransmitted	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.5.1.1.17	Counter32	read-only	The total number of GVRP messages transmitted.
C32 alaGvrpPortStatsInvalidMsgsReceived	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.5.1.1.18	Counter32	read-only	The number of Invalid messages received.
INT alaGvrpPortStatsClearStats	1.3.6.1.4.1.6486.801.1.2.1.36.1.1.5.1.1.19	INTEGER	read-write	Reset all statistics parameters corresponding to this port. By default, this objects contains a zero value.
alcatelIND1GVRPMIBConformance	1.3.6.1.4.1.6486.801.1.2.1.36.1.2			Branch for GVRP Module MIB Subsystem Conformance Information.
alcatelIND1GVRPMIBGroups	1.3.6.1.4.1.6486.801.1.2.1.36.1.2.1			Branch for GVRP Module MIB Subsystem Units of Conformance.
gvrpPortBaseGroup	1.3.6.1.4.1.6486.801.1.2.1.36.1.2.1.1			Collection of objects for management of GVRP Base Group.
gvrpPortConfigGroup	1.3.6.1.4.1.6486.801.1.2.1.36.1.2.1.2			Collection of objects for management of GVRP Port Configuration Table.
gvrpPortStatsGroup	1.3.6.1.4.1.6486.801.1.2.1.36.1.2.1.3			Collection of objects for management of GVRP Statistics Table.
gvrpNotificationGroup	1.3.6.1.4.1.6486.801.1.2.1.36.1.2.1.4			Collection of notifications for GVRP.
alcatelIND1GVRPMIBCompliances	1.3.6.1.4.1.6486.801.1.2.1.36.1.2.2			Branch for GVRP Module MIB Subsystem Compliance Statements.
alcatelIND1GVRPMIBCompliance	1.3.6.1.4.1.6486.801.1.2.1.36.1.2.2.1			Compliance statement for GVRP.

RFC description

GARP VLAN Registration Protocol for dynamic VLAN membership distribution across bridged networks.

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-GVRP-MIB