ALCATEL-IND1-IPRM-MIB

All MIBs › ALCATEL-IND1-IPRM-MIB

Organization: Alcatel-Lucent

Last Updated: 2012-12-01

Category: Routing Protocols, Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch IP route manager MIB for managing route redistribution, preferences, and global routing parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-IPRM-MIB?

ALCATEL-IND1-IPRM-MIB is an Alcatel-Lucent OmniSwitch proprietary IP Route Manager MIB covering configuration of route redistribution, route preferences, and other global IP routing parameters. It exposes the switch's active route table (alaIprmRouteTable) with destination, mask, type-of-service, next hop, protocol source, metric, and priority, alongside a separate static route table for administrator-configured routes. Its monitoring value lies in routing software status: operators can confirm which routes are installed, from which protocol source, and at what priority/metric, helping diagnose routing black holes, unexpected redistribution, or a static route failing to install. It complements standard routing MIBs with Alcatel-specific route-preference and redistribution controls rather than replacing them. It is deployed on OmniSwitch Layer 3 switches running multiple routing protocols where route-preference tuning and redistribution are configured. Network engineers evaluating or troubleshooting this functionality can download the ALCATEL-IND1-IPRM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-IPRM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel-Lucent OmniSwitch Layer 3 switches/routers

Monitoring Examples

An operator would walk alaIprmRouteTable/alaIprmRouteEntry, checking alaIprmRouteDest, alaIprmRouteNextHop, alaIprmRouteProto, and alaIprmRouteMetric to confirm which protocol installed a given route and its next hop. Comparing this against alaIprmStaticRouteTable/alaIprmStaticRouteEntry (alaIprmStaticRouteDest) would reveal whether an expected static route is missing from the active route table, indicating a routing failure or an override by a dynamic protocol. Monitoring alaIprmRoutePriority values across sources would also show whether redistribution priority is causing an unexpected route to win.

What Can Be Monitored

active IP route table entries
route next hop and protocol source
route metric and priority
static route configuration and installation status

Imported Objects

From ALCATEL-IND1-BASE

routingIND1Iprm

OBJECT-IDENTITY

From IANA-RTPROTO-MIB

IANAipRouteProtocol

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
alcatelIND1IPRMMIB	1.3.6.1.4.1.6486.801.1.2.1.10.2.1			This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This proprietary MIB contains management information for the configuration of IPRM global configuration parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2010 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
alcatelIND1IPRMMIBObjects	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1
alaIprmConfig	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1
alaIprmRouteTable	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1		not-accessible	IPRM's Routing table.
alaIprmRouteEntry	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1.1		not-accessible	A particular route to a particular destination
IP alaIprmRouteDest	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1.1.1	IpAddress	not-accessible	The destination IP address of this route.
IP alaIprmRouteMask	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1.1.2	IpAddress	not-accessible	The mask of this route
I32 alaIprmRouteTos	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1.1.3	Integer32	not-accessible	The TOS for this route
IP alaIprmRouteNextHop	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1.1.4	IpAddress	not-accessible	The Gateway for this route
IAN alaIprmRouteProto	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1.1.5	IANAipRouteProtocol	read-only	The protocol that this route was learned from
I32 alaIprmRouteMetric	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1.1.6	Integer32	read-only	The metric for this route
I32 alaIprmRoutePriority	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.1.1.7	Integer32	read-only	The priority for this route
alaIprmStaticRouteTable	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2		not-accessible	IPRM's Static Route table.
alaIprmStaticRouteEntry	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1		not-accessible	A route entered by the user
IP alaIprmStaticRouteDest	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.1	IpAddress	not-accessible	The destination IP address of this route.
IP alaIprmStaticRouteMask	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.2	IpAddress	not-accessible	The mask of this route
IP alaIprmStaticRouteNextHop	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.3	IpAddress	not-accessible	The Gateway for this route
I32 alaIprmStaticRouteMetric	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.4	Integer32	read-create	The metric for this route
ROW alaIprmStaticRouteStatus	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.5	RowStatus	read-create	The status of this entry. Enabling causes a new static route to be created, disabled causes that static route to be deleted.
ALA alaIprmStaticRouteBfdStatus	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.6	AlaIprmAdminStatus	read-create	For enabling or disabling the BFD status on this static route.
ALA alaIprmStaticRouteType	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.7	AlaIprmStaticRouteTypes	read-create	Type of static route.
U32 alaIprmStaticRouteTag	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.8	Unsigned32	read-create	Tag associated with static route.
STR alaIprmStaticRouteName	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.2.1.9	SnmpAdminString	read-create	A comment associated with the static route.
ALA alaIprmStaticAllBfd	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.3	AlaIprmAdminStatus	read-write	For attempting to enable/disable the BFD state on all static routes.
IP alaIprmPrimaryAddress	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.4	IpAddress	read-write	Defines the Primary IP Address of this Router.
IP alaIprmRouterId	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.5	IpAddress	read-write	Defines the Router-id for this Router.
STR alaIprmRouteDistinguisher	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.6	SnmpAdminString	read-write	Associates a route distinguisher to a VRF. Syntax for a route distinguisher and route target as defined in [RFC4364].
alaIprmRouteTargetTable	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.7		not-accessible	This table specifies per-VRF route target association. Each entry identifies a connectivity policy supported as part of a VPN.
alaIprmRouteTargetEntry	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.7.1		not-accessible	An entry in this table is created by an LSR for each route target configured for a VRF supporting a MPLS L3VPN instance. See [RFC4364] for a complete definition of a route target.
STR alaIprmRouteTarget	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.7.1.1	SnmpAdminString	not-accessible	A Virtual Router Route Target. Syntax for a route distinguisher and route target as defined in [RFC4364].
ALA alaIprmRouteTargetType	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.7.1.2	AlaMplsL3VpnRouteType	read-create	The route target distribution type.
ROW alaIprmRouteTargetRowStatus	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.7.1.3	RowStatus	read-create	This variable is used to create, modify, and/or delete a row in this table.
alaIprmRtPrefTable	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.8		not-accessible	This table specifies the route preference values for various types of routes.
alaIprmRtPrefTableEntry	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.8.1		not-accessible	An entry is in this table for each route preference type.
ALA alaIprmRtPrefEntryType	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.8.1.1	AlaIprmRtPrefType	not-accessible	The type of route (associated with a route preference value)
I32 alaIprmRtPrefEntryValue	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.8.1.2	Integer32	read-write	The route preference value used for this type of route.
I32 alaIprmExportRouteMap	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.9	Integer32	read-write	A route-map index representing the route-map used to filter routes exported to the Global Route Table. A value of -1 indicates no routes should be exported. A value of 0 indicates all routes should be exported. Otherwise, the value is the route-map index to use for filtering.
alaIprmImportVrfTable	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.10		not-accessible	This table specifies VRFs to import routes from.
alaIprmImportVrfEntry	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.10.1		not-accessible	An entry in this table is created for each VRF to import routes from.
STR alaIprmImportVrfName	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.10.1.1	SnmpAdminString	not-accessible	The name of the VRF that routes should be imported from. An empty string indicates the default VRF.
I32 alaIprmImportVrfRouteMap	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.10.1.2	Integer32	read-create	A route-map index representing the route-map used to filter imported routes.
ROW alaIprmImportVrfRowStatus	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.10.1.3	RowStatus	read-create	This variable is used to create, modify, and/or delete a row in this table.
alaIprmImportIsidTable	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.11		not-accessible	This table specifies ISIS L3VPN ISIDs to import routes from.
alaIprmImportIsidEntry	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.11.1		not-accessible	An entry in this table is created for each ISID to import routes from.
U32 alaIprmImportIsid	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.11.1.1	Unsigned32	not-accessible	The ISIS SPB L3VPN ISID that routes should be imported from.
I32 alaIprmImportIsidRouteMap	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.11.1.2	Integer32	read-create	A route-map index representing the route-map used to filter imported routes.
ROW alaIprmImportIsidRowStatus	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.11.1.3	RowStatus	read-create	This variable is used to create, modify, and/or delete a row in this table.
I32 alaIprmExportToAllVrfsRouteMap	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.1.1.12	Integer32	read-write	Used to export routes to all other VRFs that don't already have an entry in the Import Vrf Table. The object is a route-map index representing the route-map used to filter the exported routes. A value of -1 indicates no routes should be exported. A value of 0 indicates all routes should be exported. Otherwise, the value is the route-map index to use for filtering.
alcatelIND1IPRMMIBConformance	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.2
alcatelIND1IPRMMIBCompliances	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.2.1
alaIprmCompliance	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.2.1.1			The compliance statement for routers running IPRM and implementing the ALCATEL-IND1-IPRM MIB.
alcatelIND1IPRMMIBGroups	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.2.2
alaIprmConfigMIBGroup	1.3.6.1.4.1.6486.801.1.2.1.10.2.1.2.2.1			A collection of objects to support management of global configuration parameters of the IPRM Module.

RFC description

Alcatel enterprise MIB for IP Route Manager global configuration parameters and IP routing management.

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-IPRM-MIB

What Is ALCATEL-IND1-IPRM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description