ALCATEL-IND1-EVB-MIB

All MIBs › ALCATEL-IND1-EVB-MIB

Organization: Alcatel-Lucent

Last Updated: 2011-07-11

Category: Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch Edge Virtual Bridging MIB for managing IEEE 802.1Qbg virtual station interfaces and CDCP.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-EVB-MIB?

ALCATEL-IND1-EVB-MIB is an Alcatel-Lucent Enterprise (OmniSwitch OS10K product line) proprietary MIB implementing the Edge Virtual Bridging (EVB) subsystem defined by IEEE 802.1Qbg, including the Channel Discovery and Configuration Protocol (CDCP). It exposes configuration and status data for virtual station interfaces (VSIs) used when hypervisor-hosted virtual machines connect through a physical switch acting as an edge virtual bridge, coordinating VLAN and channel assignment between the switch and adjacent virtualized servers. As an EVB-focused module it is largely configuration- and state-oriented, letting an administrator verify that CDCP channel negotiation succeeded and that VSI associations are correctly established between the switch port and the virtual environment, which is a form of operational status monitoring for virtualization-aware networking. It directly implements the IEEE 802.1Qbg standard, so it is conceptually dependent on that standard's protocol model even though it is expressed as an Alcatel-proprietary enterprise MIB. It is deployed in Alcatel-Lucent OmniSwitch OS10K data center switches supporting server virtualization environments that require dynamic VLAN provisioning to VMs. Engineers can download the ALCATEL-IND1-EVB-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-EVB-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel-Lucent OmniSwitch OS10K

Monitoring Examples

No sample objects were provided for this MIB, so specific object names cannot be cited; typically an administrator managing an EVB-enabled OS10K switch would check CDCP channel negotiation status and VSI-to-port associations to confirm a virtual machine's network interface has been correctly bridged, and would investigate failures here if a VM loses network connectivity after migration.

What Can Be Monitored

CDCP channel negotiation status (unconfirmed, no sample objects available)

Imported Objects

From ALCATEL-IND1-BASE

softentIND1EvbMib

OBJECT-IDENTITY

From ALCATEL-IND1-TIMETRA-TC-MIB

TmnxEncapVal
TmnxPortID
TmnxServId

From IEEE8021-EVBB-MIB

ieee8021BridgeEvbSbpPortNumber
ieee8021BridgeEvbVSIID	OBJECT-TYPE
ieee8021BridgeEvbVSIIDType
ieee8021BridgeEvbVSIMvFormat	OBJECT-TYPE
ieee8021BridgeEvbVSITypeVersion	OBJECT-TYPE
ieee8021BridgeEvbVSIVlanId	OBJECT-TYPE

From IEEE8021-TC-MIB

IEEE8021BridgePortNumber

From IF-MIB

InterfaceIndex

From Q-BRIDGE-MIB

VlanIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
alcatelIND1EVBMIB	1.3.6.1.4.1.6486.801.1.2.1.70.1			This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Edge Virtual Bridge (EVB) Subsystem for OS10K Product Line. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 2011 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
alcatelIND1EvbMIBObjects	1.3.6.1.4.1.6486.801.1.2.1.70.1.1			Alcatel-Lucent EVB Subsystem Managed Objects.
evbMIBNotifications	1.3.6.1.4.1.6486.801.1.2.1.70.1.1.0
NTF evbFailedCdcpTlvTrap	1.3.6.1.4.1.6486.801.1.2.1.70.1.1.0.1			A Software Trouble report is sent by whatever application encountering a problem during its execution and would want to make the user aware of problem for maintenance purpose.
NTF evbFailedEvbTlvTrap	1.3.6.1.4.1.6486.801.1.2.1.70.1.1.0.2			A Software Trouble report is sent by whatever application encountering a problem during its execution and would want to make the user aware of problem for maintenance purpose.
NTF evbUnknownVsiManagerTrap	1.3.6.1.4.1.6486.801.1.2.1.70.1.1.0.3			A Software Trouble report is sent by whatever application encountering a problem during its execution and would want to make the user aware of problem for maintenance purpose.
NTF evbVdpAssocTlvTrap	1.3.6.1.4.1.6486.801.1.2.1.70.1.1.0.4			A Software Trouble report is sent by whatever application encountering a problem during its execution and would want to make the user aware of problem for maintenance purpose.
NTF evbCdcpLldpExpiredTrap	1.3.6.1.4.1.6486.801.1.2.1.70.1.1.0.5			A Software Trouble report is sent by whatever application encountering a problem during its execution and would want to make the user aware of problem for maintenance purpose.
NTF evbTlvExpiredTrap	1.3.6.1.4.1.6486.801.1.2.1.70.1.1.0.6			A Software Trouble report is sent by whatever application encountering a problem during its execution and would want to make the user aware of problem for maintenance purpose.
NTF evbVdpKeepaliveExpiredTrap	1.3.6.1.4.1.6486.801.1.2.1.70.1.1.0.7			A Software Trouble report is sent by whatever application encountering a problem during its execution and would want to make the user aware of problem for maintenance purpose.
evbMIBScalarObjects	1.3.6.1.4.1.6486.801.1.2.1.70.1.1.1
INT evbPortAutoMode	1.3.6.1.4.1.6486.801.1.2.1.70.1.1.1.1	INTEGER	read-write	Alcatel-Lucent EVB port auto detect mode.
INT evbDefaultType	1.3.6.1.4.1.6486.801.1.2.1.70.1.1.1.2	INTEGER	read-write	Alcatel-Lucent EVB default port type.
evbSapMIB	1.3.6.1.4.1.6486.801.1.2.1.70.1.1.2
evbVSISAPTable	1.3.6.1.4.1.6486.801.1.2.1.70.1.1.2.1		not-accessible	A table that contains database of the active VSI on Service Access Point.
evbVSISAPEntry	1.3.6.1.4.1.6486.801.1.2.1.70.1.1.2.1.1		not-accessible	A list of objects containing database of the VSI entries associated with Service Access Points.
IEE evbVSIPortNumber	1.3.6.1.4.1.6486.801.1.2.1.70.1.1.2.1.1.1	IEEE8021BridgePortNumber	not-accessible	The evbVSIPortNumber is the Port Number for the SBP where the VSI is accessed.
OCT evbVSIID	1.3.6.1.4.1.6486.801.1.2.1.70.1.1.2.1.1.2	OCTET STRING	not-accessible	This object specifies the VSIID that uniquely identifies the VSI in the DCN.
VLA evbVSIVlanID	1.3.6.1.4.1.6486.801.1.2.1.70.1.1.2.1.1.3	VlanIndex	not-accessible	The Vlan ID of the VSIID. Multiple Vlan IDs can be assigned to one VSIID. If GroupID is used, this Vlan ID is a locally defined C-VLAN ID.
TMN evbSAPPortId	1.3.6.1.4.1.6486.801.1.2.1.70.1.1.2.1.1.4	TmnxPortID	read-only	The evbSAPPortId is the access port where the EVB Service Access Point is accessed.
INT evbSAPServiceType	1.3.6.1.4.1.6486.801.1.2.1.70.1.1.2.1.1.5	INTEGER	read-only	The value of the label used to identify the SAP on the access port specified by evbSAPPortId.
TMN evbSAPEncapValue	1.3.6.1.4.1.6486.801.1.2.1.70.1.1.2.1.1.6	TmnxEncapVal	read-only	The value of the label used to identify the SAP on the access port specified by evbSAPPortId.
TMN evbSAPServiceId	1.3.6.1.4.1.6486.801.1.2.1.70.1.1.2.1.1.7	TmnxServId	read-only	This object is used to identify the Service of the EVB SAP.
evbPortModeTable	1.3.6.1.4.1.6486.801.1.2.1.70.1.1.2.2		not-accessible	A table that contains Service Access Port Mode.
evbPortModeEntry	1.3.6.1.4.1.6486.801.1.2.1.70.1.1.2.2.1		not-accessible	A list of objects containing Service Access Port Mode.
NUM evbPortId	1.3.6.1.4.1.6486.801.1.2.1.70.1.1.2.2.1.1	InterfaceIndex	not-accessible	IfIndex uniquely identify this port table.
INT evbPortMode	1.3.6.1.4.1.6486.801.1.2.1.70.1.1.2.2.1.2	INTEGER	read-create	The EvbPortMode variable indicates if the interface on this port is configured as a service access port or a vlan bridging. An access port can be created manually (through CLI) or dynamically (through requests from UNP or EVB).
ROW evbRowStatus	1.3.6.1.4.1.6486.801.1.2.1.70.1.1.2.2.1.3	RowStatus	read-create	The status of this table entry.
alcatelIND1EvbMIBConformance	1.3.6.1.4.1.6486.801.1.2.1.70.1.2			Alcatel-Lucent EVB Subsystem Conformance Information.
alcatelIND1EvbMIBGroups	1.3.6.1.4.1.6486.801.1.2.1.70.1.2.1			Branch For ALU EVB MIB Subsystem Units Of Conformance.
alaEvbModuleGroup	1.3.6.1.4.1.6486.801.1.2.1.70.1.2.1.1			Evb Control Modules Group.
alaEvbNotificationsGroup	1.3.6.1.4.1.6486.801.1.2.1.70.1.2.1.2			Collection of Notifications for management of EVB.
alcatelIND1EvbMIBCompliances	1.3.6.1.4.1.6486.801.1.2.1.70.1.2.2			Branch For ALU EVB MIB Subsystem Compliance Statements.
alcatelIND1EvbMIBCompliance	1.3.6.1.4.1.6486.801.1.2.1.70.1.2.2.1			Compliance statement for EVB.

RFC description

Alcatel-Lucent Edge Virtual Bridge (EVB) subsystem MIB for OS10K platform supporting EVB configuration and management.

Start monitoring Alcatel-Lucent Enterprise OmniSwitch OS10K-series switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-EVB-MIB

What Is ALCATEL-IND1-EVB-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description