ALCATEL-IND1-PARTITIONED-MGR-MIB

All MIBs › ALCATEL-IND1-PARTITIONED-MGR-MIB

Organization: Alcatel-Lucent

Last Updated: 2007-04-03

Category: Vendor: Alcatel-Lucent

Description: Alcatel OmniSwitch MIB covering the partitioned manager feature, used for role-based administrative domain segmentation and access control.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ALCATEL-IND1-PARTITIONED-MGR-MIB?

ALCATEL-IND1-PARTITIONED-MGR-MIB is an Alcatel enterprise MIB for the OmniSwitch "Birds Of Prey" product line, implementing a User Partitioned Manager subsystem that segments administrative access into role-based domains so different operators can be restricted to managing only specific parts of the switch. It is fundamentally a security/administration MIB, exposing configuration for how management partitions, roles, and access boundaries are defined rather than performance or environmental counters. Its relevance to monitoring is indirect: it lets an administrator verify the software-level correctness of access-control partitioning (which manager/partition owns which resources) rather than hardware or performance status like temperature or CPU load. As an Alcatel OmniSwitch enterprise module it depends on the broader ALCATEL-IND1 MIB tree conventions shared across other OmniSwitch MIBs. It is deployed in multi-tenant or multi-team OmniSwitch environments where administrative responsibilities must be segmented by partition. Network engineers evaluating or troubleshooting this functionality can download the ALCATEL-IND1-PARTITIONED-MGR-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-PARTITIONED-MGR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Alcatel OmniSwitch (Birds Of Prey product line)

Monitoring Examples

Only the generic IMPORTS clause was available as a sample object for this module, so specific partition or role table names cannot be confirmed from the data given; typically an administrator would poll partition/role assignment objects to verify a given operator's management scope is correctly restricted, but exact OID names cannot be verified here.

What Can Be Monitored

administrative partition definitions
role-based access assignments

Imported Objects

From ALCATEL-IND1-BASE

softentIND1Partmgr

OBJECT-IDENTITY

From Q-BRIDGE-MIB

VlanId

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
alcatelIND1PartitionedMgrMIB	1.3.6.1.4.1.6486.801.1.2.1.25.1			This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line User Partitioned Manager Subsystem. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
alcatelIND1PartitionedMgrMIBObjects	1.3.6.1.4.1.6486.801.1.2.1.25.1.1			Branch For Partitioned Manager Subsystem Managed Objects.
endUserProfileMgrMIB	1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1
endUserProfileTable	1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.1		not-accessible	The configuration parameters of a end user profile.
endUserProfileEntry	1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.1.1		not-accessible	An entry of the end user profile table.
STR endUserProfileName	1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.1.1.1	SnmpAdminString	read-only	The End User profile name.
END endUserProfileAreaPhysical	1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.1.1.2	EndUserProfileArea	read-write	The accessible rights for the port area.
END endUserProfileAreaVlanTable	1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.1.1.3	EndUserProfileArea	read-write	The accessible rights for the vlan area.
END endUserProfileAreaBasicIpRouting	1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.1.1.4	EndUserProfileArea	read-write	The accessible rights for the basic-routing area.
END endUserProfileAreaIpRoutesTable	1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.1.1.5	EndUserProfileArea	read-write	The accessible rights for the ip-routes area.
END endUserProfileAreaMacFilteringTable	1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.1.1.6	EndUserProfileArea	read-write	The accessible rights for the mac-address-table area.
END endUserProfileAreaSpantree	1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.1.1.7	EndUserProfileArea	read-write	The accessible rights for the spanning-tree area.
ROW endUserProfileRowStatus	1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.1.1.8	RowStatus	read-write	The status of this table entry. Reading or writing values : - active (1) : end User Profile created and OK - notInService (2) : not used for end User Profile Only reading values : - notReady (3) : missing parameters for the end User profile Only writing values : - createAndGo (4) : to create an end User Profile - createAndWait (5) : not used for end User Profile - destroy (6) : to remove a end User Profile.
endUserProfileSlotPortTable	1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.2		not-accessible	The list of slot/port of a end user.
endUserProfileSlotPortEntry	1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.2.1		not-accessible	An entry of the end user profile slot/port table.
INT endUserProfileSlotNumber	1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.2.1.1	INTEGER	read-only	The number of the physical slot contained in the profile.
END endUserProfilePortList	1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.2.1.2	EndUserPortList	read-write	A string of 64 bits, corresponding to the port number 1 to 64. The first bit corresponds to port 1, the second bit to port 2 until the 64 bit corresponding to the port 64.
ROW endUserProfileSlotPortRowStatus	1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.2.1.3	RowStatus	read-write	The status of this table entry. Reading or writing values : - active (1) : end User Profile Slot/Port created and OK - notInService (2) : not used for end User Profile Slot/Port Only reading values : - notReady (3) : missing parameters for the end User profile Slot/Port Only writing values : - createAndGo (4) : to create an end User Profile Slot/Port - createAndWait (5) : not used for end User Profile Slot/Port - destroy (6) : to remove a end User Profile Slot/Port.
endUserProfileVlanIdTable	1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.3		not-accessible	The list of vlan ids of a end user.
endUserProfileVlanIdEntry	1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.3.1		not-accessible	An entry of the end user profile Vlan Ids table.
VLA endUserProfileVlanIdStart	1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.3.1.1	VlanId	read-only	The End User Profile Vlan Id Start in a range.
VLA endUserProfileVlanIdEnd	1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.3.1.2	VlanId	read-write	The End User Profile Vlan Id End in a range.
ROW endUserProfileVlanIdRowStatus	1.3.6.1.4.1.6486.801.1.2.1.25.1.1.1.3.1.3	RowStatus	read-write	The status of this table entry. Reading or writing values : - active (1) : end User Profile Vlan Ids created and OK - notInService (2) : not used for end User Profile Vlan Ids Only reading values : - notReady (3) : missing parameters for the end User profile Vlan Ids Only writing values : - createAndGo (4) : to create an end User Profile Vlan Ids - createAndWait (5) : not used for end User Profile Vlan Ids - destroy (6) : to remove a end User Profile Vlan Ids.
alcatelIND1PartitionedMgrMIBConformance	1.3.6.1.4.1.6486.801.1.2.1.25.1.2			Branch For Partitioned Manager Subsystem Conformance Information.
alcatelIND1PartitionedMgrMIBGroups	1.3.6.1.4.1.6486.801.1.2.1.25.1.2.1			Branch For Partitioned Manager Subsystem Units Of Conformance.
endUserProfileGroup	1.3.6.1.4.1.6486.801.1.2.1.25.1.2.1.1			Collection of end UserProfile for management of Partitioned Manager.
endUserProfileSlotPortGroup	1.3.6.1.4.1.6486.801.1.2.1.25.1.2.1.2			Collection of end UserProfile slot/port for management of Partitioned Manager.
endUserProfileVlanIdGroup	1.3.6.1.4.1.6486.801.1.2.1.25.1.2.1.3			Collection of end UserProfile Vlan ids for management of Partitioned Manager.
alcatelIND1PartitionedMgrMIBCompliances	1.3.6.1.4.1.6486.801.1.2.1.25.1.2.2			Branch For Partitioned Manager Subsystem Compliance Statements.
alcatelIND1PartitionedMgrMIBCompliance	1.3.6.1.4.1.6486.801.1.2.1.25.1.2.2.1			Compliance statement for Partitioned Manager Subsystem.

RFC description

Alcatel OmniSwitch partitioned manager MIB for role-based administrative domain segmentation and access control.

Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ALCATEL-IND1-PARTITIONED-MGR-MIB

What Is ALCATEL-IND1-PARTITIONED-MGR-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description