| OID symbolic | OID numeric | Type | Access | Description |
|---|
| alcatelIND1Dot3OamMIB | 1.3.6.1.4.1.6486.801.1.2.1.52.1 | | | This module describes an authoritative enterprise-
specific Simple Network Management Protocol (SNMP) Management
Information Base (MIB):
For the Birds Of Prey Product Line
Ethernet in First Mile OAM.
The right to make changes in specification and other information
contained in this document without prior notice is reserved.
No liability shall be assumed for any incidental, indirect,
special, or consequential damages whatsoever arising from or
related to this document or the information contained herein.
Vendors, end-users, and other interested parties are granted
non-exclusive license to use this specification in connection with
management of the products for which it is intended to be used.
Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated
ALL RIGHTS RESERVED WORLDWIDE |
| alcatelIND1Dot3OamNotifications | 1.3.6.1.4.1.6486.801.1.2.1.52.1.0 | | | Branch for 802.3ah OAM Notifications. |
| NTF alaDot3OamThresholdEventClear | 1.3.6.1.4.1.6486.801.1.2.1.52.1.0.1 | | | A alaDot3OamThresholdEventClear notification is sent when a local or
remote threshold crossing event is recovered.
The OAM entity can be derived from extracting the ifIndex from
the variable bindings. The objects in the notification
correspond to the values in a row instance in the
dot3OamEventLogTable. |
| NTF alaDot3OamNonThresholdEventClear | 1.3.6.1.4.1.6486.801.1.2.1.52.1.0.2 | | | A alaDot3OamNonThresholdEventClear notification is sent when a local
or remote non-threshold crossing event is recovered.
The OAM entity can be derived from extracting the ifIndex from
the variable bindings. The objects in the notification
correspond to the values in a row instance of the
dot3OamEventLogTable. |
| alcatelIND1Dot3OamMIBObjects | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1 | | | Branch For 802.3ah OAM Objects. |
| INT alaDot3OamStatus | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.1 | INTEGER | read-write | The administrative status requested by management for
802.3ah. The value enabled(1) indicates that 802.3ah should
be enabled on this device, on all ports for which it has
not been specifically disabled. When disabled(2), 802.3ah
is disabled on all ports and all 802.3ah packets will be
dropped. A transition from disabled(2) to enabled(1) will
cause a reset of all 802.3ah state machines on all ports. |
| INT alaDot3OamGlobalClearStats | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.2 | INTEGER | read-write | Defines the global clear statistics control for Dot3OAM.
The value reset (1) indicates that clear all statistic counters
related to all ports in the system. By default, this object
contains a zero value. |
| INT alaDot3OamGlobalClearEventLogs | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.3 | INTEGER | read-write | Defines the global clear event logs control for Dot3OAM.
The value reset (1) indicates that clear all event logs
related to all ports in the system. By default, this object
contains a zero value. |
| INT alaDot3OamGlobalClearVariableTransactions | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.4 | INTEGER | read-write | Defines the global clear variable transactions control for
Dot3OAM. The value reset (1) indicates that clear all
transactions related to all ports in the system. By default,
this object contains a zero value. |
| INT alaDot3OamMultiplePduCount | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.5 | INTEGER | read-write | This object is used to set the number of PDUs that will be
sent, when OAM needs to send multiple event notification PDUs. |
| alaDot3OamPortConfig | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.8 | | | |
| alaDot3OamTable | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.8.1 | | not-accessible | This table contains the primary controls and status for the
OAM capabilities of an Ethernet like interface. There will be
one row in this table for each Ethernet like interface in the
system that supports the OAM functions defined in [802.3ah]. |
| alaDot3OamEntry | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.8.1.1 | | not-accessible | An entry in the table, containing information on the Ethernet
OAM function for a single Ethernet like interface. Entries in
the table are created automatically for each interface
supporting Ethernet OAM. The status of the row entry can be
determined from dot3OamOperStatus.
A alaDot3OamEntry is indexed in the alaDot3OamTable by the
ifIndex object of the Interfaces MIB. |
| I32 alaDot3OamKeepAliveInterval | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.8.1.1.1 | Integer32 | read-write | This object is used to set the timer in seconds to restart the
discovery process if no PDUs are received in this time frame. |
| I32 alaDot3OamHelloInterval | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.8.1.1.2 | Integer32 | read-write | This object is used to set the interval between two OAMPDUs |
| I32 alaDot3OamNextTransactionId | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.8.1.1.3 | Integer32 | read-only | This object is used to fetch the next available transaction id
required for MIB variable retrieval requests on this interface.
To read the remote entity's MIB variables, a unique transaction
id is generated for each request. The administrator first needs
to get the next available transaction id for the interface, and
provide this as index to the alaDot3OamRetrieveRequestTable. |
| alaDot3OamPortLoopbackControl | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.9 | | | |
| alaDot3OamLoopbackTable | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.9.1 | | not-accessible | This table contains controls for the loopback state of the
local link as well as indicating the status of the loopback
function. There is one entry in this table for each entry in
dot3OamTable that supports loopback functionality (where
dot3OamFunctionsSupported includes the loopbackSupport bit
set). |
| alaDot3OamLoopbackEntry | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.9.1.1 | | not-accessible | An entry in the table, containing information on the L1 ping.
One record/entry shall be maintained per interface. This record
shall be automatically created when L1 ping is initiated for the
first time on the interface. Subsequent ping operations shall
replace the record. Loopback capabilities of the interface can
be determined from the dot3OamLoopbackStatus object. |
| I32 alaDot3OamPortL1PingFramesConf | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.9.1.1.1 | Integer32 | read-write | This object is used to set the number of frames to be transmitted
from the interface during L1 ping. |
| I32 alaDot3OamPortL1PingFramesDelay | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.9.1.1.2 | Integer32 | read-write | This object is used to set the delay between two
frames transmitted during L1 ping. |
| INT alaDot3OamPortL1PingStatus | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.9.1.1.3 | INTEGER | read-write | This object is used to start the L1 ping operation. Operator
can set only start(1) value and setting of start(1) value is not valid
if object value is start(1) or running(2).
Whenever efm gets enabled on any port, this object has default(0) value.
Default(0) value implies that loopback session has not been started even
for a single time. Running(2) is corresponding to the state, when L1 ping
is going on, operationSuccessful(3) is corresponding to the state, when L1
ping operation is done successfully. operationUnsuccessful(4) is corresponding
to state when operation gets failed due to some reason. |
| C32 alaDot3OamPortL1PingFramesSent | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.9.1.1.4 | Counter32 | read-only | This object is used to keep the actual frames sent during
last L1 ping operation. |
| C32 alaDot3OamPortL1PingFramesReceived | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.9.1.1.5 | Counter32 | read-only | This object is used to keep the number of frames received
during last L1 ping operation. |
| I32 alaDot3OamPortL1PingAverageRoundTripDelay | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.9.1.1.6 | Integer32 | read-only | This object is used to keep the average delay taken by frames
during last L1 ping. |
| alaDot3OamPortStats | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.10 | | | |
| alaDot3OamStatsTable | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.10.1 | | not-accessible | This table contains statistics for the OAM function on a
particular Ethernet like interface. There is an entry in the
table for every entry in the dot3OamStatsTable.
The counters in this table are defined as 32-bit entries to
match the counter size as defined in [802.3ah]. Given the OA
protocol is a slow protocol, the counters increment at a slow
rate. |
| alaDot3OamStatsEntry | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.10.1.1 | | not-accessible | An entry in the table, containing statistics information on
the Ethernet OAM function for a single Ethernet like
interface. Entries are automatically created for every entry
in the dot3OamStatsTable. Counters are maintained across
transitions in dot3OamOperStatus. |
| INT alaDot3OamPortClearStats | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.10.1.1.1 | INTEGER | read-write | Reset all statistics parameters corresponding to this port
By default, this objects contains a zero value. |
| alaDot3OamPortEventLogs | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.11 | | | |
| alaDot3OamEventLogTable | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.11.1 | | not-accessible | This table records a history of the events that have occurred
at the Ethernet OAM level. These events can include locally
detected events, which may result in locally generated
OAMPDUs, and remotely detected events, which are detected by
the OAM peer entity and signaled to the local entity via
Ethernet OAM. Ethernet OAM events can be signaled by Event
Notification OAMPDUs or by the flags field in any OAMPDU. |
| alaDot3OamEventLogEntry | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.11.1.1 | | not-accessible | An entry in the dot3OamEventLogTable. Entries are
automatically created whenever Ethernet OAM events occur at
the local OAM entity, and when Event Notification OAMPDUs are
received at the local OAM entity (indicating events have
occurred at the peer OAM entity). The size of the table is
implementation dependent, but when the table becomes full,
older events are automatically deleted to make room for newer
events. The table index dot3OamEventLogIndex increments for
each new entry, and when the maximum value is reached the
value restarts at zero. |
| INT alaDot3OamPortClearEventLogs | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.11.1.1.1 | INTEGER | read-write | Reset all event logs corresponding to this port
By default, this objects contains a zero value. |
| alaDot3OamRetrieveRequest | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.12 | | | |
| alaDot3OamRetrieveRequestTable | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.12.1 | | not-accessible | A table containing MIB variable retrieval request
information |
| alaDot3OamRetrieveRequestEntry | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.12.1.1 | | not-accessible | A 802.3ah MIB variable retrieval request entry. |
| I32 alaDot3OamTransactionId | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.12.1.1.1 | Integer32 | not-accessible | This object is used to set the available transaction id for
retrieving the remote MIB variable for this interface. The
value for this is obtained from alaDot3OamNextTransactionId,
which is part of alaDot3OamTable. |
| INT alaDot3OamVariableRequestBranch | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.12.1.1.2 | INTEGER | not-accessible | This object is used to set the branch to reference the MIB
object to be retrieved. This is set to attribute, package or
object depending upon the request for getting the MIB variables. |
| I32 alaDot3OamVariableRequestLeaf | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.12.1.1.3 | Integer32 | not-accessible | This object is used to set the leaf to reference the MIB
object to be retrieved. |
| INT alaDot3OamVariableRequestRetrieveStatus | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.12.1.1.4 | INTEGER | read-only | This object is used to check the status of a MIB request,
Active means that the request is currently in progress),
failed means that the request has failed, and success
means that the request returned successfully. |
| ROW alaDot3OamVariableRequestRowStatus | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.12.1.1.5 | RowStatus | read-create | Row Status for initiating a MIB retrieval request. |
| INT alaDot3OamPortClearVariableTransactions | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.12.1.1.6 | INTEGER | read-create | Reset all variable transactions corresponding to this port
By default, this objects contains a zero value. |
| alaDot3OamRetrieveResponse | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.13 | | | |
| alaDot3OamRetrieveResponseTable | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.13.1 | | not-accessible | A table containing MIB variable retrieval response
information |
| alaDot3OamRetrieveResponseEntry | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.13.1.1 | | not-accessible | A 802.3ah MIB variable retrieval response entry. |
| INT alaDot3OamVariableResponseBranch | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.13.1.1.1 | INTEGER | not-accessible | The branch to reference the MIB object retrieved. |
| I32 alaDot3OamVariableResponseLeaf | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.13.1.1.2 | Integer32 | not-accessible | The leaf to reference the MIB object retrieved. |
| STR alaDot3OamVariableResponseValue | 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.13.1.1.3 | DisplayString | read-only | The value of the retrived attribute. |
| alcatelIND1Dot3OamMIBConformance | 1.3.6.1.4.1.6486.801.1.2.1.52.1.2 | | | Branch for 802.3ah Module MIB Subsystem Conformance Information. |
| alcatelIND1Dot3OamMIBGroups | 1.3.6.1.4.1.6486.801.1.2.1.52.1.2.1 | | | Branch for 802.3ah Module MIB Subsystem Units of Conformance. |
| alaDot3OamBaseGroup | 1.3.6.1.4.1.6486.801.1.2.1.52.1.2.1.1 | | | Collection of objects for management of 802.3ah Base Group. |
| alaDot3OamPortConfigGroup | 1.3.6.1.4.1.6486.801.1.2.1.52.1.2.1.2 | | | Collection of objects for management of 802.3ah Port Configuration Table. |
| alaDot3OamPortLoopbackControlGroup | 1.3.6.1.4.1.6486.801.1.2.1.52.1.2.1.3 | | | Collection of objects for management of 802.3ah Loopback Table. |
| alaDot3OamPortStatsGroup | 1.3.6.1.4.1.6486.801.1.2.1.52.1.2.1.4 | | | Collection of objects for management of 802.3ah Statistics Table. |
| alaDot3OamPortEventLogsGroup | 1.3.6.1.4.1.6486.801.1.2.1.52.1.2.1.5 | | | Collection of objects for management of 802.3ah Event Log Table. |
| alaDot3OamRetrieveRequestGroup | 1.3.6.1.4.1.6486.801.1.2.1.52.1.2.1.6 | | | Collection of objects for management of 802.3ah Retrieve Request Table. |
| alaDot3OamRetrieveResponseGroup | 1.3.6.1.4.1.6486.801.1.2.1.52.1.2.1.7 | | | Collection of objects for management of 802.3ah Retrieve Response Table. |
| alaDot3OamNotificationGroup | 1.3.6.1.4.1.6486.801.1.2.1.52.1.2.1.8 | | | A collection of notifications used by 802.3ah to signal
to a management entity that local or remote events have
recovered on a specified Ethernet link. |
| alcatelIND1Dot3OamMIBCompliances | 1.3.6.1.4.1.6486.801.1.2.1.52.1.2.2 | | | Branch for 802.3ah Module MIB Subsystem Compliance Statements. |
| alcatelIND1Dot3OamMIBCompliance | 1.3.6.1.4.1.6486.801.1.2.1.52.1.2.2.1 | | | Compliance statement for 802.3ah. |
