All MIBs › ALCATEL-IND1-DRCTM-MIB
Organization: Alcatel-Lucent
Last Updated: 2007-05-24
Category: Quality of Service, Vendor: Alcatel-Lucent
Description: Alcatel OmniSwitch DRC traffic management MIB for dynamic resource and congestion-based traffic shaping policies.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ALCATEL-IND1-DRCTM-MIB?
ALCATEL-IND1-DRCTM-MIB is an Alcatel-Lucent Enterprise proprietary MIB for the OmniSwitch "Birds Of Prey" product line's Task Manager (DRC/TM) subsystem, which centrally tracks the enable/disable status of the switch's IP routing protocols and logging configuration. It exposes scalars indicating the router's primary IP address and router ID, along with per-protocol status flags for RIP, OSPF, BGP, DVMRP, PIM, MSDP, RIPng, OSPFv3, and IS-IS, plus a syslog facility setting for debug/log output. For device status monitoring it lets an administrator quickly confirm which routing protocols are currently enabled on the switch and cross-check that against the intended design, revealing an unexpectedly disabled protocol (e.g., OSPF down when it should be running) that would explain a routing outage. It aggregates status from, and complements, the individual IETF routing MIBs (OSPF-MIB, BGP4-MIB, PIM-MIB, etc.) rather than replacing them. It is typically deployed on Alcatel-Lucent OmniSwitch core/edge routers running multiple concurrent routing protocols in enterprise or service-provider networks. Network engineers evaluating or troubleshooting this functionality can download the ALCATEL-IND1-DRCTM-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ALCATEL-IND1-DRCTM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Alcatel-Lucent OmniSwitch (Birds Of Prey product line) router/switch
Monitoring Examples
An administrator would poll alaDrcTmIPOspfStatus, alaDrcTmIPBgpStatus, and alaDrcTmIPPimStatus to get a quick summary of which routing protocols are currently enabled on the switch, and check alaDrcTmIPRouterId against the expected router ID. If alaDrcTmIPOspfStatus shows disabled while OSPF adjacencies are expected, this MIB would be the first place to spot that the protocol was administratively turned off rather than simply failing to form neighbors.
What Can Be Monitored
- per-protocol routing status (RIP/OSPF/BGP/PIM/IS-IS/etc.)
- router ID
- primary router IP address
- syslog facility for routing debug logs
This MIB depends on
Related MIBs
Imported Objects
From ALCATEL-IND1-BASE
| routingIND1Tm | OBJECT-IDENTITY |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| enterprises |
From SNMPv2-TC
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| alaDrcTmBgpDebug | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5 | |||
| I32 alaDrcTmBgpDebugAggr | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.11 | Integer32 | read-write | Sets the level of Debugging for the BGP Aggregation related messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmBgpDebugAll | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.22 | Integer32 | read-write | Sets the level of Debugging for all types of BGP debug messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmBgpDebugDamp | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.1 | Integer32 | read-write | Sets the level of Debugging for the BGP Damp Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmBgpDebugErrors | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.14 | Integer32 | read-write | Sets the level of Debugging for the BGP Error messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmBgpDebugFsm | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.2 | Integer32 | read-write | Sets the level of Debugging for the BGP FSM Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmBgpDebugInfo | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.20 | Integer32 | read-write | Sets the level of Debugging for the BGP Information messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmBgpDebugKeepAlive | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.6 | Integer32 | read-write | Sets the level of Debugging for the BGP KeepAlive messages exchanged with the neighbor. A level of 0 indicates no debugging. |
| I32 alaDrcTmBgpDebugLocal | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.17 | Integer32 | read-write | Sets the level of Debugging for the BGP local messages on this router. A level of 0 indicates no debugging. |
| alaDrcTmBgpDebugMIBGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2.5 | A collection of optional objects to provide debugging support of BGP DRC TM. | ||
| I32 alaDrcTmBgpDebugMip | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.18 | Integer32 | read-write | Sets the level of Debugging for the BGP MIP messages (including CLI/SNMP) on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmBgpDebugNotify | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.7 | Integer32 | read-write | Sets the level of Debugging for the BGP Notify Messages exchanged with the neighbor. A level of 0 indicates no debugging. |
| I32 alaDrcTmBgpDebugOpen | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.5 | Integer32 | read-write | Sets the level of Debugging for the BGP Open messages exchanged with the neighbor. A level of 0 indicates no debugging. |
| I32 alaDrcTmBgpDebugPeer | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.16 | Integer32 | read-write | Sets the level of Debugging for the BGP peer messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmBgpDebugPeer6 | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.23 | Integer32 | read-write | Sets the level of Debugging for the BGP IPv6 Peer messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmBgpDebugPolicy | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.8 | Integer32 | read-write | Sets the level of Debugging for the BGP policy Messages exchanged with the neighbor. A level of 0 indicates no debugging. |
| I32 alaDrcTmBgpDebugRecvUpd | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.3 | Integer32 | read-write | Sets the level of Debugging for the BGP route update messages received from the neighbor. A level of 0 indicates no debugging. |
| I32 alaDrcTmBgpDebugRedist | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.15 | Integer32 | read-write | Sets the level of Debugging for the BGP Redistribute messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmBgpDebugRestart | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.21 | Integer32 | read-write | Sets the level of Debugging for the BGP Graceful Restart messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmBgpDebugRoute | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.9 | Integer32 | read-write | Sets the level of Debugging for the BGP Route messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmBgpDebugRoute6 | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.24 | Integer32 | read-write | Sets the level of Debugging for BGP IPv6 route messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmBgpDebugSendUpd | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.4 | Integer32 | read-write | Sets the level of Debugging for the BGP route update messages sent to the neighbor. A level of 0 indicates no debugging. |
| I32 alaDrcTmBgpDebugSync | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.10 | Integer32 | read-write | Sets the level of Debugging for the BGP Synchronization messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmBgpDebugTcp | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.12 | Integer32 | read-write | Sets the level of Debugging for the BGP tcp connection messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmBgpDebugTm | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.19 | Integer32 | read-write | Sets the level of Debugging for the BGP and Task Manager Interaction messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmBgpDebugWarnings | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.5.13 | Integer32 | read-write | Sets the level of Debugging for the BGP Warning messages on this router. A level of 0 indicates no debugging. |
| alaDrcTmCompliance | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.1.1 | The compliance statement for routers running DRC Task Manager (TM) and implementing the ALCATEL-IND1-DRCTM MIB. | ||
| alaDrcTmConfig | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.1 | |||
| alaDrcTmConfigMIBGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2.1 | A collection of objects to support management of DRC Task Manager. | ||
| alaDrcTmDebug | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2 | |||
| I32 alaDrcTmDebugAll | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2.13 | Integer32 | read-write | Sets the debug level for debugging of all DRC TM messages |
| I32 alaDrcTmDebugError | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2.2 | Integer32 | read-write | Sets the debug level for DRC TM Error messages |
| I32 alaDrcTmDebugEvents | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2.5 | Integer32 | read-write | Sets the debug level for DRC TM Event messages |
| I32 alaDrcTmDebugLevel | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2.1 | Integer32 | read-write | Sets the level of Debugging for the DRC TM on this router. A level of 0 indicates no debugging. This object is currently not used |
| alaDrcTmDebugMIBGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2.2 | A collection of optional objects to provide debugging support of DRC TM. | ||
| I32 alaDrcTmDebugMip | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2.6 | Integer32 | read-write | Sets the debug level for DRC TM MIP processing (including CLI/SNMP) |
| I32 alaDrcTmDebugMisc | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2.8 | Integer32 | read-write | Sets the debug level for Misc DRC TM messages |
| I32 alaDrcTmDebugTaskInfo | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2.4 | Integer32 | read-write | Sets the debug level for DRC TM Task Info messages |
| I32 alaDrcTmDebugUnused1 | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2.9 | Integer32 | read-write | Sets the debug level for Unused1 messages |
| I32 alaDrcTmDebugUnused2 | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2.10 | Integer32 | read-write | Sets the debug level for Unused2 messages |
| I32 alaDrcTmDebugUnused3 | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2.11 | Integer32 | read-write | Sets the debug level for Unused3 messages |
| I32 alaDrcTmDebugUnused4 | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2.12 | Integer32 | read-write | Sets the debug level for Unused4 messages |
| I32 alaDrcTmDebugUnusedA | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2.3 | Integer32 | read-write | Sets the debug level for UnusedA messages |
| I32 alaDrcTmDebugUnusedB | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.2.7 | Integer32 | read-write | Sets the debug level for UnusedB messages |
| alaDrcTmDvmrpDebug | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6 | |||
| I32 alaDrcTmDvmrpDebugAll | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.15 | Integer32 | read-write | Sets the level of Debugging for all types of DVMRP debug messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmDvmrpDebugError | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.1 | Integer32 | read-write | Sets the level of Debugging for the DVMRP Error Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmDvmrpDebugFlash | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.9 | Integer32 | read-write | Sets the level of Debug messages for the DVMRP's flash processing on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmDvmrpDebugGrafts | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.6 | Integer32 | read-write | Sets the level of Debug messages for the DVMRP Grafts processing on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmDvmrpDebugIgmp | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.8 | Integer32 | read-write | Sets the level of Debug messages for the DVMRP Igmp processing on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmDvmrpDebugInit | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.11 | Integer32 | read-write | Sets the level of Debug messages for the DVMRP's Initialization setup on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmDvmrpDebugIpmrm | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.13 | Integer32 | read-write | Sets the level of Debug messages for the DVMRP IPMRM Interaction on this router. A level of 0 indicates no debugging. |
| alaDrcTmDvmrpDebugMIBGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2.6 | A collection of optional objects to provide debugging support of DVMRP DRC TM. | ||
| I32 alaDrcTmDvmrpDebugMip | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.10 | Integer32 | read-write | Sets the level of Debug messages for the DVMRP's MIP processing (including CLI/SNMP) on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmDvmrpDebugMisc | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.14 | Integer32 | read-write | Sets the level of Debug messages for the DVMRP's Miscellaneous on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmDvmrpDebugNbr | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.2 | Integer32 | read-write | Sets the level of Debugging for the DVMRP Neighbor processing on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmDvmrpDebugProbes | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.4 | Integer32 | read-write | Sets the level of Debug messages for DVMRP Probes processing on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmDvmrpDebugPrunes | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.5 | Integer32 | read-write | Sets the level of Debug messages for the DVMRP Prunes Processing on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmDvmrpDebugRoutes | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.3 | Integer32 | read-write | Sets the level of Debug messages for DVMRP Route messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmDvmrpDebugTime | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.7 | Integer32 | read-write | Sets the level of Debug messages for the DVMRP's Timer related events on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmDvmrpDebugTm | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.6.12 | Integer32 | read-write | Sets the level of Debug messages for the DVMRP Task Manager Interaction on this router. A level of 0 indicates no debugging. |
| INT alaDrcTmIPBgpStatus | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.1.5 | INTEGER | read-write | Controls the load status of BGP on this router. Loaded(1) is the only valid Set value. |
| INT alaDrcTmIPDvmrpStatus | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.1.6 | INTEGER | read-write | Controls the load status of DVMRP on this router. Loaded(1) is the only valid Set value. |
| INT alaDrcTmIPIsisStatus | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.1.11 | INTEGER | read-write | Controls the load status of ISIS on this router. Loaded(1) is the only valid Set value. |
| alaDrcTmIpmrmDebug | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.10 | |||
| I32 alaDrcTmIpmrmDebugAging | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.10.3 | Integer32 | read-write | Sets the level of Debug messages for the IPMRM's Aging messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIpmrmDebugAll | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.10.10 | Integer32 | read-write | Sets the level of Debugging for all types of IPMRM debug messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIpmrmDebugError | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.10.1 | Integer32 | read-write | Sets the level of Debugging for the IPMRM Error Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIpmrmDebugFib | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.10.2 | Integer32 | read-write | Sets the level of Debug messages for the IPMRM FIB processing on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIpmrmDebugInit | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.10.7 | Integer32 | read-write | Sets the level of Debug messages for the IPMRM's Initialization setup on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIpmrmDebugIpms | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.10.5 | Integer32 | read-write | Sets the level of Debug messages for the IPMRM/IPMS processing on this router. A level of 0 indicates no debugging. |
| alaDrcTmIpmrmDebugMIBGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2.10 | A collection of optional objects to provide debugging support of IPMRM DRC TM. | ||
| I32 alaDrcTmIpmrmDebugMip | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.10.6 | Integer32 | read-write | Sets the level of Debug messages for the IPMRM's MIP processing (including CLI/SNMP) on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIpmrmDebugMisc | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.10.9 | Integer32 | read-write | Sets the level of Debug messages for the IPMRM's Miscellaneous messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIpmrmDebugProtos | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.10.4 | Integer32 | read-write | Sets the level of Debug messages for the IPMRM's protos processing on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIpmrmDebugTm | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.10.8 | Integer32 | read-write | Sets the level of Debug messages for the IPMRM and Task managerinteraction on this router. A level of 0 indicates no debugging. |
| INT alaDrcTmIPMsdpStatus | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.1.8 | INTEGER | read-write | Controls the load status of MSDP on this router. Loaded(1) is the only valid Set value. |
| INT alaDrcTmIPOspf3Status | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.1.10 | INTEGER | read-write | Controls the load status of OSPFv3 on this router. Loaded(1) is the only valid Set value. |
| INT alaDrcTmIPOspfStatus | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.1.4 | INTEGER | read-write | Controls the load status of OSPF on this router. Loaded(1) is the only valid Set value. |
| INT alaDrcTmIPPimStatus | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.1.7 | INTEGER | read-write | Controls the load status of PIM on this router. Loaded(1) is the only valid Set value. |
| INT alaDrcTmIPRipngStatus | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.1.9 | INTEGER | read-write | Controls the load status of Ripng on this router. Loaded(1) is the only valid Set value. |
| INT alaDrcTmIPRipStatus | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.1.3 | INTEGER | read-write | Controls the load status of RIP on this router. Loaded(1) is the only valid Set value. |
| alaDrcTmIprmDebug | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9 | |||
| I32 alaDrcTmIprmDebugAccesslist | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.2 | Integer32 | read-write | Sets the level of Debugging for IPRM AccessList handling on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIprmDebugAll | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.14 | Integer32 | read-write | Sets the level of Debugging for all types of IPRM debug messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIprmDebugBfd | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.15 | Integer32 | read-write | Sets the level of Debugging for IPRM's BFD support on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIprmDebugError | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.1 | Integer32 | read-write | Sets the level of Debugging for the IPRM Error Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIprmDebugIntf | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.3 | Integer32 | read-write | Sets the level of Debugging for IPRM Interface handling on this router. A level of 0 indicates no debugging. |
| alaDrcTmIprmDebugMIBGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2.9 | A collection of optional objects to provide debugging support of IPRM DRC TM. | ||
| I32 alaDrcTmIprmDebugMip | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.4 | Integer32 | read-write | Sets the level of Debug messages for the IPRM's MIP processing (including CLI/SNMP) on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIprmDebugMisc | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.5 | Integer32 | read-write | Sets the level of Debugging for Miscellaneous IPRM issues. A level of 0 indicates no debugging. |
| I32 alaDrcTmIprmDebugNhs | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.6 | Integer32 | read-write | Sets the level of Debugging for IPRM's NextHopSync handling on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIprmDebugPrefix | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.7 | Integer32 | read-write | Sets the level of Debugging for IPRM's Prefix registration code on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIprmDebugRedist | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.8 | Integer32 | read-write | Sets the level of Debugging for IPRM's Redistribution code this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIprmDebugRoute4 | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.9 | Integer32 | read-write | Sets the level of Debugging for IPRM's handling of IPv4 routes on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIprmDebugRoute6 | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.10 | Integer32 | read-write | Sets the level of Debugging for IPRM's handling of IPv6 routes on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIprmDebugRoutemap | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.11 | Integer32 | read-write | Sets the level of Debugging for IPRM's RouteMap handling on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIprmDebugRoutepref | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.12 | Integer32 | read-write | Sets the level of Debugging for IPRM's RoutePreference code on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIprmDebugStatic | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.9.13 | Integer32 | read-write | Sets the level of Debugging for IPRM's Static route handling on this router. A level of 0 indicates no debugging. |
| IP alaDrcTmIPRouterId | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.1.2 | IpAddress | read-write | Defines the Router-id for this Router. |
| IP alaDrcTmIPRouterPrimaryAddress | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.1.1 | IpAddress | read-write | Defines the Primary IP Address of this Router. |
| alaDrcTmIsisDebug | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13 | |||
| I32 alaDrcTmIsisDebugAdj | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.4 | Integer32 | read-write | Sets the level of Debugging for the ISIS Adjacency Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIsisDebugAll | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.16 | Integer32 | read-write | Sets the level of Debugging for the All ISIS Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIsisDebugCkt | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.5 | Integer32 | read-write | Sets the level of Debugging for the ISIS Circuit Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIsisDebugError | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.1 | Integer32 | read-write | Sets the level of Debugging for the ISIS Error Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIsisDebugFlood | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.8 | Integer32 | read-write | Sets the level of Debugging for the ISIS Flood Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIsisDebugIntf | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.9 | Integer32 | read-write | Sets the level of Debugging for the ISIS Interface Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIsisDebugIprm | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.10 | Integer32 | read-write | Sets the level of Debugging for the ISIS Iprm Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIsisDebugLeak | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.13 | Integer32 | read-write | Sets the level of Debugging for the ISIS Leak Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIsisDebugLsp | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.7 | Integer32 | read-write | Sets the level of Debugging for the ISIS Lsp Messages on this router. A level of 0 indicates no debugging. |
| alaDrcTmIsisDebugMIBGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2.13 | A collection of optional objects to provide debugging support of ISIS DRC TM. | ||
| I32 alaDrcTmIsisDebugMip | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.11 | Integer32 | read-write | Sets the level of Debugging for the ISIS Mip Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIsisDebugMsg | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.12 | Integer32 | read-write | Sets the level of Debugging for the ISIS Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIsisDebugPkt | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.3 | Integer32 | read-write | Sets the level of Debugging for the ISIS Packet Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIsisDebugRestart | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.15 | Integer32 | read-write | Sets the level of Debugging for the ISIS Restart Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIsisDebugSpf | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.6 | Integer32 | read-write | Sets the level of Debugging for the ISIS Spf Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIsisDebugSummary | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.14 | Integer32 | read-write | Sets the level of Debugging for the ISIS Summary Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmIsisDebugWarn | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.13.2 | Integer32 | read-write | Sets the level of Debugging for the ISIS Warning Messages on this router. A level of 0 indicates no debugging. |
| STR alaDrcTmLogBufferDumpfile | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.12.4 | DisplayString | read-write | Redirect/Dump Log Buffer to the specified File. If filename is left null, Buffer is dumped to Console. |
| I32 alaDrcTmLogBufferSize | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.12.3 | Integer32 | read-write | Size of the Buffer in Kbytes where DRC log messages shall be logged. |
| INT alaDrcTmLogClearBuffer | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.12.11 | INTEGER | read-write | clears the buffer/critical buffer contents |
| STR alaDrcTmLogCriticalBufferDumpfile | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.12.5 | DisplayString | read-write | Redirect/Dump Critical Ring Buffer to the specified File. If filename is left null, Buffer is dumped to Console. |
| alaDrcTmLogDestination | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.12 | |||
| alaDrcTmLogDestinationMIBGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2.12 | A collection of optional objects to provide debugging support of DRC TM LOG DESTINATION. | ||
| INT alaDrcTmLogShowDate | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.12.9 | INTEGER | read-write | enables/disables showing of Date in TimeStamp of DRC log messages. |
| INT alaDrcTmLogShowFunction | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.12.7 | INTEGER | read-write | enables/disables showing of Function Names in DRC log messages. |
| INT alaDrcTmLogShowLine | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.12.8 | INTEGER | read-write | enables/disables showing of Line Numbers in DRC log messages. |
| INT alaDrcTmLogShowTask | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.12.6 | INTEGER | read-write | enables/disables showing of Task Names in DRC log messages. |
| INT alaDrcTmLogShowTime | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.12.10 | INTEGER | read-write | enables/disables showing of Seconds in TimeStamp of DRC log messages. |
| I32 alaDrcTmLogToSessionId | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.12.2 | Integer32 | read-write | Session Id of Switch's telnet/ssh session where DRC log messages shall be logged. Default is console. |
| INT alaDrcTmLogToSysFacility | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.12.1 | INTEGER | read-write | Logs the DRC log messages to one of the System's Facility |
| alaDrcTmOspf3Debug | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11 | |||
| I32 alaDrcTmOspf3DebugAll | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.15 | Integer32 | read-write | Sets the level of Debugging for all types of OSPF3 debug messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspf3DebugArea | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.8 | Integer32 | read-write | Sets the level of Debugging for the OSPF3 Area Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspf3DebugError | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.1 | Integer32 | read-write | Sets the level of Debugging for the OSPF3 Error Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspf3DebugFlood | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.10 | Integer32 | read-write | Sets the level of Debugging for the OSPF3 Flood Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspf3DebugInfo | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.2 | Integer32 | read-write | Sets the level of Debugging for the OSPF3 Info Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspf3DebugIntf | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.3 | Integer32 | read-write | Sets the level of Debugging for the OSPF3 Interface Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspf3DebugLsa | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.9 | Integer32 | read-write | Sets the level of Debugging for the OSPF3 Lsa Messages on this router. A level of 0 indicates no debugging. |
| alaDrcTmOspf3DebugMIBGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2.11 | A collection of optional objects to provide debugging support of OSPF3 DRC TM. | ||
| I32 alaDrcTmOspf3DebugMip | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.14 | Integer32 | read-write | Sets the level of Debugging for the OSPF3 Mip Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspf3DebugNbr | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.6 | Integer32 | read-write | Sets the level of Debugging for the OSPF3 Nbr Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspf3DebugRdb | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.12 | Integer32 | read-write | Sets the level of Debugging for the OSPF3 Rdb Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspf3DebugRecv | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.4 | Integer32 | read-write | Sets the level of Debugging for the OSPF3 Recv Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspf3DebugSend | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.5 | Integer32 | read-write | Sets the level of Debugging for the OSPF3 Send Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspf3DebugSpf | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.11 | Integer32 | read-write | Sets the level of Debugging for the OSPF3 Spf Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspf3DebugState | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.7 | Integer32 | read-write | Sets the level of Debugging for the OSPF3 State Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspf3DebugVlink | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.11.13 | Integer32 | read-write | Sets the level of Debugging for the OSPF3 Vlink Messages on this router. A level of 0 indicates no debugging. |
| alaDrcTmOspfDebug | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4 | |||
| I32 alaDrcTmOspfDebugAge | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.10 | Integer32 | read-write | Sets the level of Debug messages for the OSPF's Aging process of LSA's on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspfDebugAll | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.26 | Integer32 | read-write | Sets the level of Debugging for all types of OSPF debug messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspfDebugArea | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.17 | Integer32 | read-write | Sets the level of Debug messages for the OSPF's area events on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspfDebugAuth | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.16 | Integer32 | read-write | Sets the level of Debug messages for the OSPF's authentication process on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspfDebugDbexch | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.14 | Integer32 | read-write | Sets the level of Debug messages for the OSPF's Neighbors' database exchange on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspfDebugError | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.1 | Integer32 | read-write | Sets the level of Debugging for the OSPF Error Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspfDebugFlood | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.6 | Integer32 | read-write | Sets the level of Debug messages for the flooding of LSAs in OSPF on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspfDebugHello | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.15 | Integer32 | read-write | Sets the level of Debug messages for the OSPF's hello handshaking process on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspfDebugHelper | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.25 | Integer32 | read-write | Sets the level of Debug messages for debugging of OSPF Graceful Restart Helper mode events and information. |
| I32 alaDrcTmOspfDebugInfo | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.20 | Integer32 | read-write | Sets the level of Debug messages for the OSPF's Information on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspfDebugIntf | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.18 | Integer32 | read-write | Sets the level of Debug messages for the OSPF's interface operations on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspfDebugLsdb | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.8 | Integer32 | read-write | Sets the level of Debug messages for the OSPF's LSDB-related operations on this router. A level of 0 indicates no debugging. |
| alaDrcTmOspfDebugMIBGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2.4 | A collection of optional objects to provide debugging support of OSPF DRC TM. | ||
| I32 alaDrcTmOspfDebugMip | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.19 | Integer32 | read-write | Sets the level of Debug messages for the MIP processing of OSPF's specific commands on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspfDebugRdb | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.9 | Integer32 | read-write | Sets the level of Debug messages for the OSPF's RDB-relate operation on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspfDebugRecv | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.4 | Integer32 | read-write | Sets the level of Debug messages for the Packets received by OSPF on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspfDebugRedist | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.12 | Integer32 | read-write | Sets the level of Debug messages for the OSPF's route redistribution process on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspfDebugRestart | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.24 | Integer32 | read-write | Sets the level of Debug messages for debugging of OSPF Graceful Restart events and information. |
| I32 alaDrcTmOspfDebugSend | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.5 | Integer32 | read-write | Sets the level of Debug messages for the Packets sent by OSPF from this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspfDebugSetup | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.21 | Integer32 | read-write | Sets the level of Debug messages for the OSPF's Initialization setup on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspfDebugSPF | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.7 | Integer32 | read-write | Sets the level of Debug messages for the OSPF's SPF calculations on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspfDebugState | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.3 | Integer32 | read-write | Sets the level of Debugging for the OSPF-State Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspfDebugSummary | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.13 | Integer32 | read-write | Sets the level of Debug messages for the OSPF's all summarizations on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspfDebugTime | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.22 | Integer32 | read-write | Sets the level of Debug messages for the OSPF's Time related events on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspfDebugTm | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.23 | Integer32 | read-write | Sets the level of Debug messages for the OSPF's Task Manager communication events this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspfDebugVlink | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.11 | Integer32 | read-write | Sets the level of Debug messages for the OSPF's virtual linkoperations on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmOspfDebugWarning | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.4.2 | Integer32 | read-write | Sets the level of Debugging for the OSPF Warning Messages on this router. A level of 0 indicates no debugging. |
| alaDrcTmPimDebug | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7 | |||
| I32 alaDrcTmPimDebugAll | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.26 | Integer32 | read-write | Sets the level of Debugging for all types of PIM debug messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmPimDebugBootstrap | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.4 | Integer32 | read-write | Sets the level of Debug messages for PIMSM bootstrap messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmPimDebugCRP | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.5 | Integer32 | read-write | Sets the level of Debug messages for PIMSM CRP processing on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmPimDebugDmAssert | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.20 | Integer32 | read-write | Sets the level of Debug messages for the PIMDM's Assert processing on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmPimDebugDmHello | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.17 | Integer32 | read-write | Sets the level of Debugging for the PIMDM Hello Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmPimDebugDmIgmp | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.21 | Integer32 | read-write | Sets the level of Debug messages for the PIMDM Igmp processing on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmPimDebugDmIpmrm | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.22 | Integer32 | read-write | Sets the level of Debug messages for the PIMDM IPMRM Interaction on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmPimDebugDmJoinPrune | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.19 | Integer32 | read-write | Sets the level of Debug messages for the PIMDM Join/Prune processing on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmPimDebugDmMisc | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.23 | Integer32 | read-write | Sets the level of Debug messages for the PIMDM's Miscellaneous processing on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmPimDebugDmNbr | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.16 | Integer32 | read-write | Sets the level of Debugging for the PIMDM Neighbor processing on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmPimDebugDmRoute | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.18 | Integer32 | read-write | Sets the level of Debug messages for the PIMDM's Route Processing on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmPimDebugError | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.1 | Integer32 | read-write | Sets the level of Debugging for the PIM Error Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmPimDebugGraft | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.24 | Integer32 | read-write | Sets the level of Debug messages for the PIMDM's Graft processing on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmPimDebugInit | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.3 | Integer32 | read-write | Sets the level of Debug messages for the PIM's Initialization setup on this router. A level of 0 indicates no debugging. |
| alaDrcTmPimDebugMIBGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2.7 | A collection of optional objects to provide debugging support of PIM DRC TM. | ||
| I32 alaDrcTmPimDebugMip | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.2 | Integer32 | read-write | Sets the level of Debug messages for the PIM's MIP processing (including CLI/SNMP) on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmPimDebugSmAssert | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.12 | Integer32 | read-write | Sets the level of Debug messages for the PIMSM's Assert processing on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmPimDebugSmHello | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.9 | Integer32 | read-write | Sets the level of Debugging for the PIMSM Hello Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmPimDebugSmIgmp | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.13 | Integer32 | read-write | Sets the level of Debug messages for the PIMSM Igmp processing on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmPimDebugSmIpmrm | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.14 | Integer32 | read-write | Sets the level of Debug messages for the PIMSM IPMRM Interaction on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmPimDebugSmJoinPrune | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.11 | Integer32 | read-write | Sets the level of Debug messages for the PIMSM Join/Prune processing on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmPimDebugSmMisc | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.15 | Integer32 | read-write | Sets the level of Debug messages for the PIMSM's Miscellaneous processing on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmPimDebugSmNbr | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.8 | Integer32 | read-write | Sets the level of Debugging for the PIMSM Neighbor processing on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmPimDebugSmRoute | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.10 | Integer32 | read-write | Sets the level of Debug messages for the PIMSM's Route Processing on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmPimDebugSpt | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.7 | Integer32 | read-write | Sets the level of Debug messages for the PIMSM's SPT related events on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmPimDebugStateRefresh | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.25 | Integer32 | read-write | Sets the level of Debug messages for the PIMDM's State Refresh Processing on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmPimDebugTime | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.7.6 | Integer32 | read-write | Sets the level of Debug messages for the PIMSM's Timer related events on this router. A level of 0 indicates no debugging. |
| alaDrcTmRipDebug | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.3 | |||
| I32 alaDrcTmRipDebugAge | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.3.6 | Integer32 | read-write | Sets the level of Debug messages for the RIP's Aging messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmRipDebugAll | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.3.12 | Integer32 | read-write | Sets the level of Debugging for all types of RIP debug messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmRipDebugConfig | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.3.7 | Integer32 | read-write | Sets the level of Debug messages for the RIP's Configuration messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmRipDebugError | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.3.1 | Integer32 | read-write | Sets the level of Debugging for the RIP Error Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmRipDebugInfo | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.3.9 | Integer32 | read-write | Sets the level of Debug messages for the RIP's Information on this router. A level of 0 indicates no debugging. |
| alaDrcTmRipDebugMIBGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2.3 | A collection of optional objects to provide debugging support of RIP DRC TM. | ||
| I32 alaDrcTmRipDebugRdb | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.3.5 | Integer32 | read-write | Sets the level of Debug messages for the RIP's Routing Database on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmRipDebugRecv | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.3.3 | Integer32 | read-write | Sets the level of Debug messages for the Packets received by RIP on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmRipDebugRedist | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.3.8 | Integer32 | read-write | Sets the level of Debug messages for the RIP's route redistribution messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmRipDebugSend | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.3.4 | Integer32 | read-write | Sets the level of Debug messages for the Packets sent by RIP from this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmRipDebugSetup | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.3.10 | Integer32 | read-write | Sets the level of Debug messages for the RIP's Initialization setup on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmRipDebugTime | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.3.11 | Integer32 | read-write | Sets the level of Debug messages for the RIP's Time related events on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmRipDebugWarning | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.3.2 | Integer32 | read-write | Sets the level of Debugging for the RIP Warning Messages on this router. A level of 0 indicates no debugging. |
| alaDrcTmRipngDebug | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8 | |||
| I32 alaDrcTmRipngDebugAge | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.6 | Integer32 | read-write | Sets the level of Debug messages for the RIPng's Aging messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmRipngDebugAll | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.15 | Integer32 | read-write | Sets the level of Debugging for all types of RIPng debug messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmRipngDebugError | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.1 | Integer32 | read-write | Sets the level of Debugging for the RIPng Error Messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmRipngDebugInfo | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.8 | Integer32 | read-write | Sets the level of Debug messages for the RIPng's Information on this router. A level of 0 indicates no debugging. |
| alaDrcTmRipngDebugMIBGroup | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2.8 | A collection of optional objects to provide debugging support of RIPNG DRC TM. | ||
| I32 alaDrcTmRipngDebugMip | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.7 | Integer32 | read-write | Sets the level of Debug messages for the RIPng's MIP messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmRipngDebugNexthopFilter | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.13 | Integer32 | read-write | Sets the level of Debug messages for the RIPng's Nexthop Filter messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmRipngDebugRdb | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.5 | Integer32 | read-write | Sets the level of Debug messages for the RIPng's Routing Database on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmRipngDebugRecv | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.3 | Integer32 | read-write | Sets the level of Debug messages for the Packets received by RIPng on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmRipngDebugRedist | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.16 | Integer32 | read-write | Sets the level of Debugging for RIPng redistribution messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmRipngDebugRouteFilter | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.12 | Integer32 | read-write | Sets the level of Debug messages for the RIPng's Route Filter messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmRipngDebugSend | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.4 | Integer32 | read-write | Sets the level of Debug messages for the Packets sent by RIPng from this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmRipngDebugSetup | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.9 | Integer32 | read-write | Sets the level of Debug messages for the RIPng's Initialization setup on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmRipngDebugSummary | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.14 | Integer32 | read-write | Sets the level of Debug messages for the RIPng's Summarization messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmRipngDebugTime | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.10 | Integer32 | read-write | Sets the level of Debug messages for the RIPng's Timer related events on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmRipngDebugTm | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.11 | Integer32 | read-write | Sets the level of Debug messages for the RIPng/Task Manager Interaction messages on this router. A level of 0 indicates no debugging. |
| I32 alaDrcTmRipngDebugWarning | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1.8.2 | Integer32 | read-write | Sets the level of Debugging for the RIPng Warning Messages on this router. A level of 0 indicates no debugging. |
| alcatelIND1DrcTmMIB | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1 | This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This proprietary MIB contains management information for the configuration of the Task Manager's global configuration parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE | ||
| alcatelIND1DrcTmMIBCompliances | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.1 | |||
| alcatelIND1DrcTmMIBConformance | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2 | |||
| alcatelIND1DrcTmMIBGroups | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.2.2 | |||
| alcatelIND1DrcTmMIBObjects | 1.3.6.1.4.1.6486.801.1.2.1.10.1.1.1 |
RFC description
Management information for Alcatel Task Manager's global configuration parameters including routing debug options.
Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.