All MIBs › ALCATEL-IND1-DOT3-OAM-MIB › alaDot3OamPortL1PingStatus
alaDot3OamPortL1PingStatus
Module: ALCATEL-IND1-DOT3-OAM-MIB
OID (symbolic): ALCATEL-IND1-DOT3-OAM-MIB::alaDot3OamPortL1PingStatus
OID (numeric): 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.9.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is used to start the L1 ping operation. Operator can set only start(1) value and setting of start(1) value is not valid if object value is start(1) or running(2). Whenever efm gets enabled on any port, this object has default(0) value. Default(0) value implies that loopback session has not been started even for a single time. Running(2) is corresponding to the state, when L1 ping is going on, operationSuccessful(3) is corresponding to the state, when L1 ping operation is done successfully. operationUnsuccessful(4) is corresponding to state when operation gets failed due to some reason.
What is alaDot3OamPortL1PingStatus?
Enumeration (default/start/running/success/unsuccessful/failed) controlling L1 ping test state. Shows status of layer 1 loopback diagnostic. Example: value 'running' means ping test is in progress.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.9.1.1.3 snmpwalk -v2c -c public <target> ALCATEL-IND1-DOT3-OAM-MIB::alaDot3OamPortL1PingStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.9.1.1.3.1 snmpget -v2c -c public <target> ALCATEL-IND1-DOT3-OAM-MIB::alaDot3OamPortL1PingStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.9.1.1.3.1 i <value>
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> alaDot3OamPortL1PingStatus.1
Start monitoring Alcatel-Lucent Enterprise OmniSwitch switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ALCATEL-IND1-DOT3-OAM-MIB::alaDot3OamPortL1PingStatus OID value, configure state conditions and alerts, and monitor any Alcatel-Lucent Enterprise OmniSwitch switches from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.6486 | alcatel | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801 | alcatelIND1BaseMIB | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1 | alcatelIND1Management | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1.2 | managementIND1Software | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1.2.1 | softwareIND1Entities | ALCATEL-IND1-BASE |
| 1.3.6.1.4.1.6486.801.1.2.1.52 | softentIND1Dot3Oam | ALCATEL-IND1-BASE |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.6486.801.1.2.1.52.1 | alcatelIND1Dot3OamMIB | ALCATEL-IND1-DOT3-OAM-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.52.1.1 | alcatelIND1Dot3OamMIBObjects | ALCATEL-IND1-DOT3-OAM-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.9 | alaDot3OamPortLoopbackControl | ALCATEL-IND1-DOT3-OAM-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.9.1 | alaDot3OamLoopbackTable | ALCATEL-IND1-DOT3-OAM-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.9.1.1 | alaDot3OamLoopbackEntry | ALCATEL-IND1-DOT3-OAM-MIB |
| 1.3.6.1.4.1.6486.801.1.2.1.52.1.1.9.1.1.3 | alaDot3OamPortL1PingStatus | ALCATEL-IND1-DOT3-OAM-MIB |