All MIBs › ADAPTECCIOSTANDARDGROUPMIFDEFINITION2-MIB
Category: Fibre Channel and Storage, Vendor: Adaptec
Description: Defines standard CIO group management objects for Adaptec storage controllers using the Common I/O framework.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ADAPTECCIOSTANDARDGROUPMIFDEFINITION2-MIB?
This MIB defines the standard Common Information Object (CIO)/DMI-derived management group for Adaptec storage controller products, translating DMI MIF (Management Information Format) component definitions into an SNMP-accessible group. It exposes basic component identity and asset information such as manufacturer (a1Manufacturer), product name (a1Product), version (a1Version), serial number (a1SerialNumber), and installation/verification status objects (a1Installation, a1Verify). Its primary monitoring value is asset/inventory and installation-status tracking for a storage controller, confirming what hardware is installed, its firmware/version, and whether it has been verified/validated, rather than exposing live performance counters. It is explicitly derived from the DMI/MIF component and group model (per tComponentid/eComponentid, tMiftomib/eMiftomib naming), reflecting a dependency on the Desktop Management Interface standard that predates native SNMP MIB design. It is typically deployed alongside other Adaptec storage-controller MIBs on servers using Adaptec RAID/SCSI host bus adapters for hardware inventory and asset management. Engineers can download the ADAPTECCIOSTANDARDGROUPMIFDEFINITION2-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ADAPTECCIOSTANDARDGROUPMIFDEFINITION2-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Adaptec storage/RAID controller (host bus adapter)
Monitoring Examples
An administrator would poll a1Manufacturer, a1Product, a1Version, and a1SerialNumber to build an inventory record of the installed Adaptec controller, and check a1Installation/a1Verify to confirm the component was properly installed and passed verification. A mismatch or an unverified status on a1Verify would indicate a controller that failed post-install validation and needs attention. Note this module is heavily a DMI-to-MIB translation layer rather than a rich runtime-performance MIB, so it is best used for asset/inventory confirmation rather than live health metrics.
What Can Be Monitored
- controller manufacturer/product/version
- serial number
- installation status
- verification status
This MIB depends on
Related MIBs
Imported Objects
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| DMI a1Installation | 1.3.6.1.4.1.795.50.10.1.1.1.5 | DmiDateX | read-only | The time and date when this component was installed. |
| STR a1Manufacturer | 1.3.6.1.4.1.795.50.10.1.1.1.1 | DmiDisplaystring | read-only | Manufacturer of this system. |
| STR a1Product | 1.3.6.1.4.1.795.50.10.1.1.1.2 | DmiDisplaystring | read-only | Product name for this system. |
| STR a1SerialNumber | 1.3.6.1.4.1.795.50.10.1.1.1.4 | DmiDisplaystring | read-only | Serial number for this system. |
| INT a1Verify | 1.3.6.1.4.1.795.50.10.1.1.1.6 | INTEGER | read-only | A code that provides a level of verification that the component is stillinstalled and working. |
| STR a1Version | 1.3.6.1.4.1.795.50.10.1.1.1.3 | DmiDisplaystring | read-only | Version number of this system. |
| INT a7001Compression | 1.3.6.1.4.1.795.50.10.1.7001.1.11 | INTEGER | read-only | If true, the storage device supports compression. |
| INT a7001DeviceLoaded | 1.3.6.1.4.1.795.50.10.1.7001.1.8 | INTEGER | read-only | If true, then the storage device is loaded. If the device is not removable, then this value shall be 'TRUE'. |
| INT a7001Encryption | 1.3.6.1.4.1.795.50.10.1.7001.1.12 | INTEGER | read-only | If true, the storage device supports encryption. |
| NUM a7001FormattedMediaCapacity | 1.3.6.1.4.1.795.50.10.1.7001.1.6 | DmiInteger64X | read-only | The total size in kbytes of this storage media after it has been formatted. |
| NUM a7001MediaDataBlockSize | 1.3.6.1.4.1.795.50.10.1.7001.1.5 | DmiInteger | read-only | The size in bytes of the data blocks used on the storage media. If the media block size is unknown or not consistent across the media, then this value shall be zero. |
| INT a7001MediaLoaded | 1.3.6.1.4.1.795.50.10.1.7001.1.10 | INTEGER | read-only | If true, the media in this storage device is loaded. If the media is not removable, then this value shall be 'TRUE' |
| INT a7001RemovableDevice | 1.3.6.1.4.1.795.50.10.1.7001.1.7 | INTEGER | read-only | If true, then this storage device is removable (e.g.: PCMCIA device). |
| INT a7001RemovableMedia | 1.3.6.1.4.1.795.50.10.1.7001.1.9 | INTEGER | read-only | If true, then the media in this storage device is removable. |
| NUM a7001StorageDeviceIndex | 1.3.6.1.4.1.795.50.10.1.7001.1.1 | DmiInteger | read-only | An index into the storage device table. |
| STR a7001Sub_identifier | 1.3.6.1.4.1.795.50.10.1.7001.1.4 | DmiDisplaystring | read-only | The sub-identifier for this storage device (e.g., the device's SCSI logical unit number. |
| INT a7001Type | 1.3.6.1.4.1.795.50.10.1.7001.1.2 | INTEGER | read-only | The type of this mass storage device. If 'Other' is used, then the Type Description attribute shall be used. |
| STR a7001TypeDescription | 1.3.6.1.4.1.795.50.10.1.7001.1.3 | DmiDisplaystring | read-only | A longer description of the storage device. For example: 3.5 inch flexible diskette drive using diskettes with a maximum capacity of 1.44MB. If 'Other' was specified above, then this field shall be used. Otherwise, the contents of this optional field shall not contradict the Storage Device Type specified above. |
| STR a7002AssociatedGroup | 1.3.6.1.4.1.795.50.10.1.7002.1.5 | DmiDisplaystring | read-only | Class string of the group which originated the event. |
| INT a7002EventIsStateBased | 1.3.6.1.4.1.795.50.10.1.7002.1.3 | INTEGER | read-only | The value of this attribute determined whether the Event being reported is a state-based Event or not. If the value of this attribute is TRUE then the Event is state-based. Else the Event is not state-based |
| STR a7002EventMessage | 1.3.6.1.4.1.795.50.10.1.7002.1.10 | DmiDisplaystring | read-only | Auxiliary information related to the event. |
| INT a7002EventSeverity | 1.3.6.1.4.1.795.50.10.1.7002.1.2 | INTEGER | read-only | The severity of this event. |
| INT a7002EventSolution | 1.3.6.1.4.1.795.50.10.1.7002.1.8 | INTEGER | read-only | A solution to the problem that caused the event. |
| NUM a7002EventStateKey | 1.3.6.1.4.1.795.50.10.1.7002.1.4 | DmiInteger | read-only | This attribute holds the key identifying a row of the Event State group within the Component in which the event generator group is located. The Current State attribute within the row contains the current state of this state-based event. The current state can be one of the four severities: OK, Non-Critical, Critical, and Non-Recoverable. |
| INT a7002EventSubsystem | 1.3.6.1.4.1.795.50.10.1.7002.1.7 | INTEGER | read-only | The minor functional aspect of the product causing the fault. |
| INT a7002EventSystem | 1.3.6.1.4.1.795.50.10.1.7002.1.6 | INTEGER | read-only | The major functional aspect of the product causing the fault. |
| INT a7002InstanceDataPresent | 1.3.6.1.4.1.795.50.10.1.7002.1.9 | INTEGER | read-only | Indicates whether second event block contains instance-specific data. |
| INT a7002StorageDevicesEventType | 1.3.6.1.4.1.795.50.10.1.7002.1.1 | INTEGER | read-only | The type of Storage Devices event that has occurred. |
| STR a7002VendorSpecificData | 1.3.6.1.4.1.795.50.10.1.7002.1.11 | DmiOctetstring | read-only | Auxiliary information related to the event. |
| INT a7003BusMaster | 1.3.6.1.4.1.795.50.10.1.7003.1.4 | INTEGER | read-only | If true, then this storage controller is the bus master. |
| NUM a7003ControllerIndex | 1.3.6.1.4.1.795.50.10.1.7003.1.1 | DmiInteger | read-only | An index into the Storage Controller table. |
| STR a7003Identification | 1.3.6.1.4.1.795.50.10.1.7003.1.2 | DmiDisplaystring | read-only | e.g. Name, brand and hardware revision level of the storage controller. |
| INT a7003ProtectionManagement | 1.3.6.1.4.1.795.50.10.1.7003.1.3 | INTEGER | read-only | Indicates whether or not the controller provides redundancy or protection against device failures. |
| NUM a7003SecondsSinceLastPower_up | 1.3.6.1.4.1.795.50.10.1.7003.1.5 | DmiInteger | read-only | The number of seconds that have passed since this controller was last powered on. |
| STR a7004AssociatedGroup | 1.3.6.1.4.1.795.50.10.1.7004.1.5 | DmiDisplaystring | read-only | Class string of the group which originated the event. |
| INT a7004EventIsStateBased | 1.3.6.1.4.1.795.50.10.1.7004.1.3 | INTEGER | read-only | The value of this attribute determined whether the Event being reported is a state-based Event or not. If the value of this attribute is TRUE then the Event is state-based. Else the Event is not state-based |
| STR a7004EventMessage | 1.3.6.1.4.1.795.50.10.1.7004.1.10 | DmiDisplaystring | read-only | Auxiliary information related to the event. |
| INT a7004EventSeverity | 1.3.6.1.4.1.795.50.10.1.7004.1.2 | INTEGER | read-only | The severity of this event. |
| INT a7004EventSolution | 1.3.6.1.4.1.795.50.10.1.7004.1.8 | INTEGER | read-only | A solution to the problem that caused the event. |
| NUM a7004EventStateKey | 1.3.6.1.4.1.795.50.10.1.7004.1.4 | DmiInteger | read-only | This attribute holds the key identifying a row of the Event State group within the Component in which the event generator group is located. The Current State attribute within the row contains the current state of this state-based event. The current state can be one of the four severities: OK, Non-Critical, Critical, and Non-Recoverable. |
| INT a7004EventSubsystem | 1.3.6.1.4.1.795.50.10.1.7004.1.7 | INTEGER | read-only | The minor functional aspect of the product causing the fault. |
| INT a7004EventSystem | 1.3.6.1.4.1.795.50.10.1.7004.1.6 | INTEGER | read-only | The major functional aspect of the product causing the fault. |
| INT a7004InstanceDataPresent | 1.3.6.1.4.1.795.50.10.1.7004.1.9 | INTEGER | read-only | Indicates whether second event block contains instance-specific data. |
| INT a7004StorageControllerEventType | 1.3.6.1.4.1.795.50.10.1.7004.1.1 | INTEGER | read-only | The type of Storage Controller event that has occurred. |
| STR a7004VendorSpecificData | 1.3.6.1.4.1.795.50.10.1.7004.1.11 | DmiOctetstring | read-only | Auxiliary information related to the event. |
| STR a7005Description | 1.3.6.1.4.1.795.50.10.1.7005.1.3 | DmiDisplaystring | read-only | Description of the enclosure. |
| NUM a7005EnclosureIndex | 1.3.6.1.4.1.795.50.10.1.7005.1.1 | DmiInteger | read-only | An index into the Enclosure table. |
| INT a7005Type | 1.3.6.1.4.1.795.50.10.1.7005.1.2 | INTEGER | read-only | Type of the enclosure. |
| STR a7006AssociatedGroup | 1.3.6.1.4.1.795.50.10.1.7006.1.5 | DmiDisplaystring | read-only | Class string of the group which originated the event. |
| INT a7006EnclosureEventType | 1.3.6.1.4.1.795.50.10.1.7006.1.1 | INTEGER | read-only | The type of Enclosure event that has occurred. |
| INT a7006EventIsStateBased | 1.3.6.1.4.1.795.50.10.1.7006.1.3 | INTEGER | read-only | The value of this attribute determined whether the Event being reported is a state-based Event or not. If the value of this attribute is TRUE then the Event is state-based. Else the Event is not state-based |
| STR a7006EventMessage | 1.3.6.1.4.1.795.50.10.1.7006.1.10 | DmiDisplaystring | read-only | Auxiliary information related to the event. |
| INT a7006EventSeverity | 1.3.6.1.4.1.795.50.10.1.7006.1.2 | INTEGER | read-only | The severity of this event. |
| INT a7006EventSolution | 1.3.6.1.4.1.795.50.10.1.7006.1.8 | INTEGER | read-only | A solution to the problem that caused the event. |
| NUM a7006EventStateKey | 1.3.6.1.4.1.795.50.10.1.7006.1.4 | DmiInteger | read-only | This attribute holds the key identifying a row of the Event State group within the Component in which the event generator group is located. The Current State attribute within the row contains the current state of this state-based event. The current state can be one of the four severities: OK, Non-Critical, Critical, and Non-Recoverable. |
| INT a7006EventSubsystem | 1.3.6.1.4.1.795.50.10.1.7006.1.7 | INTEGER | read-only | The minor functional aspect of the product causing the fault. |
| INT a7006EventSystem | 1.3.6.1.4.1.795.50.10.1.7006.1.6 | INTEGER | read-only | The major functional aspect of the product causing the fault. |
| INT a7006InstanceDataPresent | 1.3.6.1.4.1.795.50.10.1.7006.1.9 | INTEGER | read-only | Indicates whether second event block contains instance-specific data. |
| STR a7006VendorSpecificData | 1.3.6.1.4.1.795.50.10.1.7006.1.11 | DmiOctetstring | read-only | Auxiliary information related to the event. |
| STR a7007AddressDescriptor | 1.3.6.1.4.1.795.50.10.1.7007.1.5 | DmiDisplaystring | read-only | The address descriptor of this bus port. For example, the SCSI address of this port. |
| NUM a7007BusPortIndex | 1.3.6.1.4.1.795.50.10.1.7007.1.1 | DmiInteger | read-only | An index into the Bus Port table. |
| INT a7007ConnectorGender | 1.3.6.1.4.1.795.50.10.1.7007.1.12 | INTEGER | read-only | Indicates the gender of the connector described above. |
| INT a7007ConnectorType | 1.3.6.1.4.1.795.50.10.1.7007.1.10 | INTEGER | read-only | Describes how options (cards, devices, etc.) physically connect to this bus port. If 'Other' is used, then the Connector Type Description attribute shall be used. |
| STR a7007ConnectorTypeDescription | 1.3.6.1.4.1.795.50.10.1.7007.1.11 | DmiDisplaystring | read-only | An additional text description of the type of connector describe above. If 'Other' was specified above, then this field shall be used. Otherwis , the contents of this optional field shall not contradict the connector specified above. |
| INT a7007Isochronous | 1.3.6.1.4.1.795.50.10.1.7007.1.6 | INTEGER | read-only | Indicates whether or not this bus port supports isochronous transfers. |
| NUM a7007MaximumNumberOfAttachments | 1.3.6.1.4.1.795.50.10.1.7007.1.9 | DmiInteger | read-only | The maximum number of directly addressable entities supported by this bus port's protocol. A value of zero should be used if the number of attachments is unknown. |
| NUM a7007MaximumTransferRate | 1.3.6.1.4.1.795.50.10.1.7007.1.8 | DmiInteger | read-only | The theoretical maximum transfer rate, in millions of bytes per second, that this Bus Port is capable of achieving under ideal conditions. A value of zero should be used if the transfer rate is less than 1 million bytes per second. A value of 0x80000000 should be used if the transfer rate is unknown. |
| NUM a7007MaximumWidth | 1.3.6.1.4.1.795.50.10.1.7007.1.7 | DmiInteger | read-only | The maximum width, in bits, of this Bus Port's data path. A value of 1 should be used for serial. |
| INT a7007Protocol | 1.3.6.1.4.1.795.50.10.1.7007.1.2 | INTEGER | read-only | The protocol describing the electrical characteristic of the Bus Port. If 'Other' is used, then the Protocol Description attribute shall be used. |
| STR a7007ProtocolDescription | 1.3.6.1.4.1.795.50.10.1.7007.1.3 | DmiDisplaystring | read-only | Additional description of the protocol described above. If 'Other' was specified above, then this field shall be used. Otherwise, the contents of this optional field shall not contradict the Protocol specified above. |
| INT a7007SignalCharacteristics | 1.3.6.1.4.1.795.50.10.1.7007.1.4 | INTEGER | read-only | The signal characteristics of the Bus Port being described. |
| STR a7008AssociatedGroup | 1.3.6.1.4.1.795.50.10.1.7008.1.5 | DmiDisplaystring | read-only | Class string of the group which originated the event. |
| INT a7008BusPortEventType | 1.3.6.1.4.1.795.50.10.1.7008.1.1 | INTEGER | read-only | The type of Bus Port event that has occurred. |
| INT a7008EventIsStateBased | 1.3.6.1.4.1.795.50.10.1.7008.1.3 | INTEGER | read-only | The value of this attribute determined whether the Event being reported is a state-based Event or not. If the value of this attribute is TRUE then the Event is state-based. Else the Event is not state-based |
| STR a7008EventMessage | 1.3.6.1.4.1.795.50.10.1.7008.1.10 | DmiDisplaystring | read-only | Auxiliary information related to the event. |
| INT a7008EventSeverity | 1.3.6.1.4.1.795.50.10.1.7008.1.2 | INTEGER | read-only | The severity of this event. |
| INT a7008EventSolution | 1.3.6.1.4.1.795.50.10.1.7008.1.8 | INTEGER | read-only | A solution to the problem that caused the event. |
| NUM a7008EventStateKey | 1.3.6.1.4.1.795.50.10.1.7008.1.4 | DmiInteger | read-only | This attribute holds the key identifying a row of the Event State group within the Component in which the event generator group is located. The Current State attribute within the row contains the current state of this state-based event. The current state can be one of the four severities: OK, Non-Critical, Critical, and Non-Recoverable. |
| INT a7008EventSubsystem | 1.3.6.1.4.1.795.50.10.1.7008.1.7 | INTEGER | read-only | The minor functional aspect of the product causing the fault. |
| INT a7008EventSystem | 1.3.6.1.4.1.795.50.10.1.7008.1.6 | INTEGER | read-only | The major functional aspect of the product causing the fault. |
| INT a7008InstanceDataPresent | 1.3.6.1.4.1.795.50.10.1.7008.1.9 | INTEGER | read-only | Indicates whether second event block contains instance-specific data. |
| STR a7008VendorSpecificData | 1.3.6.1.4.1.795.50.10.1.7008.1.11 | DmiOctetstring | read-only | Auxiliary information related to the event. |
| NUM a7009AggregatePhysicalExtentIndex | 1.3.6.1.4.1.795.50.10.1.7009.1.1 | DmiInteger | read-only | An index into the Aggregate Physical Extent table. |
| NUM a7009NumberOfBlocks | 1.3.6.1.4.1.795.50.10.1.7009.1.2 | DmiInteger64X | read-only | The total number of blocks (including the check data blocks) contained in this aggregate p_extent. The block size is the same as the storage device associated with this aggregate p_extent. Note: If no redundancy group is associated with an aggregate p_extent, then this indicates the number of p_extent blocks that are available. |
| NUM a7009NumberOfBlocksOfCheckData | 1.3.6.1.4.1.795.50.10.1.7009.1.3 | DmiInteger64X | read-only | The number of blocks contained in this aggregate p_extent to be used as check data. If the Aggregate p_extent is available, then this value shall be zero. |
| NUM a7010AggregateProtectedSpaceExtentIndex | 1.3.6.1.4.1.795.50.10.1.7010.1.1 | DmiInteger | read-only | An index into the Aggregate Protected Space Extent table. |
| NUM a7010NumberOfBlocks | 1.3.6.1.4.1.795.50.10.1.7010.1.2 | DmiInteger64X | read-only | The total number of user data blocks that are both located on a single storage device and part or all of a single volume set. The block size is the same as the storage device associated with this aggregate ps_extent. Note: If no volume set is associated with an aggregate ps_extent, then this number indicates the number of blocks that are available. |
| STR a7011Name | 1.3.6.1.4.1.795.50.10.1.7011.1.2 | DmiDisplaystring | read-only | The name of the volume set. |
| NUM a7011ProtectedSpaceExtentInterleaveDepth | 1.3.6.1.4.1.795.50.10.1.7011.1.5 | DmiInteger64X | read-only | This is the number of ps_extents to stripe as a collective set. This value shall be zero except when the ps_extent group is used. |
| NUM a7011ProtectedSpaceStripeLength | 1.3.6.1.4.1.795.50.10.1.7011.1.4 | DmiInteger64X | read-only | The number of ps_extents which form a user data stripe. This value shall be zero except when the ps_extent group is used. |
| NUM a7011TotalStorageCapacity | 1.3.6.1.4.1.795.50.10.1.7011.1.3 | DmiInteger64X | read-only | The total size in bytes of the user data space of this volume set. |
| NUM a7011VolumeSetIndex | 1.3.6.1.4.1.795.50.10.1.7011.1.1 | DmiInteger | read-only | An index into the Volume Set table. |
| STR a7012AssociatedGroup | 1.3.6.1.4.1.795.50.10.1.7012.1.5 | DmiDisplaystring | read-only | Class string of the group which originated the event. |
| INT a7012EventIsStateBased | 1.3.6.1.4.1.795.50.10.1.7012.1.3 | INTEGER | read-only | The value of this attribute determined whether the Event being reported is a state-based Event or not. If the value of this attribute is TRUE then the Event is state-based. Else the Event is not state-based |
| STR a7012EventMessage | 1.3.6.1.4.1.795.50.10.1.7012.1.10 | DmiDisplaystring | read-only | Auxiliary information related to the event. |
| INT a7012EventSeverity | 1.3.6.1.4.1.795.50.10.1.7012.1.2 | INTEGER | read-only | The severity of this event. |
| INT a7012EventSolution | 1.3.6.1.4.1.795.50.10.1.7012.1.8 | INTEGER | read-only | A solution to the problem that caused the event. |
| NUM a7012EventStateKey | 1.3.6.1.4.1.795.50.10.1.7012.1.4 | DmiInteger | read-only | This attribute holds the key identifying a row of the Event State group within the Component in which the event generator group is located. The Current State attribute within the row contains the current state of this state-based event. The current state can be one of the four severities: OK, Non-Critical, Critical, and Non-Recoverable. |
| INT a7012EventSubsystem | 1.3.6.1.4.1.795.50.10.1.7012.1.7 | INTEGER | read-only | The minor functional aspect of the product causing the fault. |
| INT a7012EventSystem | 1.3.6.1.4.1.795.50.10.1.7012.1.6 | INTEGER | read-only | The major functional aspect of the product causing the fault. |
| INT a7012InstanceDataPresent | 1.3.6.1.4.1.795.50.10.1.7012.1.9 | INTEGER | read-only | Indicates whether second event block contains instance-specific data. |
| STR a7012VendorSpecificData | 1.3.6.1.4.1.795.50.10.1.7012.1.11 | DmiOctetstring | read-only | Auxiliary information related to the event. |
| INT a7012VolumeSetEventType | 1.3.6.1.4.1.795.50.10.1.7012.1.1 | INTEGER | read-only | The type of Volume Set event that has occurred. |
| STR a7013AssociatedGroup | 1.3.6.1.4.1.795.50.10.1.7013.1.5 | DmiDisplaystring | read-only | Class string of the group which originated the event. |
| INT a7013EventIsStateBased | 1.3.6.1.4.1.795.50.10.1.7013.1.3 | INTEGER | read-only | The value of this attribute determined whether the Event being reported is a state-based Event or not. If the value of this attribute is TRUE then the Event is state-based. Else the Event is not state-based |
| STR a7013EventMessage | 1.3.6.1.4.1.795.50.10.1.7013.1.10 | DmiDisplaystring | read-only | Auxiliary information related to the event. |
| INT a7013EventSeverity | 1.3.6.1.4.1.795.50.10.1.7013.1.2 | INTEGER | read-only | The severity of this event. |
| INT a7013EventSolution | 1.3.6.1.4.1.795.50.10.1.7013.1.8 | INTEGER | read-only | A solution to the problem that caused the event. |
| NUM a7013EventStateKey | 1.3.6.1.4.1.795.50.10.1.7013.1.4 | DmiInteger | read-only | This attribute holds the key identifying a row of the Event State group within the Component in which the event generator group is located. The Current State attribute within the row contains the current state of this state-based event. The current state can be one of the four severities: OK, Non-Critical, Critical, and Non-Recoverable. |
| INT a7013EventSubsystem | 1.3.6.1.4.1.795.50.10.1.7013.1.7 | INTEGER | read-only | The minor functional aspect of the product causing the fault. |
| INT a7013EventSystem | 1.3.6.1.4.1.795.50.10.1.7013.1.6 | INTEGER | read-only | The major functional aspect of the product causing the fault. |
| INT a7013InstanceDataPresent | 1.3.6.1.4.1.795.50.10.1.7013.1.9 | INTEGER | read-only | Indicates whether second event block contains instance-specific data. |
| STR a7013VendorSpecificData | 1.3.6.1.4.1.795.50.10.1.7013.1.11 | DmiOctetstring | read-only | Auxiliary information related to the event. |
| INT a7013VolumeSetEventType | 1.3.6.1.4.1.795.50.10.1.7013.1.1 | INTEGER | read-only | The type of Volume Set activity event that has occurred. |
| NUM a7014RedundancyGroupIndex | 1.3.6.1.4.1.795.50.10.1.7014.1.1 | DmiInteger | read-only | An index into the Redundancy Group table. |
| INT a7014RedundancyType | 1.3.6.1.4.1.795.50.10.1.7014.1.2 | INTEGER | read-only | This field specifies the type of the redundancy formed. |
| STR a7015AssociatedGroup | 1.3.6.1.4.1.795.50.10.1.7015.1.5 | DmiDisplaystring | read-only | Class string of the group which originated the event. |
| INT a7015EventIsStateBased | 1.3.6.1.4.1.795.50.10.1.7015.1.3 | INTEGER | read-only | The value of this attribute determined whether the Event being reported is a state-based Event or not. If the value of this attribute is TRUE then the Event is state-based. Else the Event is not state-based |
| STR a7015EventMessage | 1.3.6.1.4.1.795.50.10.1.7015.1.10 | DmiDisplaystring | read-only | Auxiliary information related to the event. |
| INT a7015EventSeverity | 1.3.6.1.4.1.795.50.10.1.7015.1.2 | INTEGER | read-only | The severity of this event. |
| INT a7015EventSolution | 1.3.6.1.4.1.795.50.10.1.7015.1.8 | INTEGER | read-only | A solution to the problem that caused the event. |
| NUM a7015EventStateKey | 1.3.6.1.4.1.795.50.10.1.7015.1.4 | DmiInteger | read-only | This attribute holds the key identifying a row of the Event State group within the Component in which the event generator group is located. The Current State attribute within the row contains the current state of this state-based event. The current state can be one of the four severities: OK, Non-Critical, Critical, and Non-Recoverable. |
| INT a7015EventSubsystem | 1.3.6.1.4.1.795.50.10.1.7015.1.7 | INTEGER | read-only | The minor functional aspect of the product causing the fault. |
| INT a7015EventSystem | 1.3.6.1.4.1.795.50.10.1.7015.1.6 | INTEGER | read-only | The major functional aspect of the product causing the fault. |
| INT a7015InstanceDataPresent | 1.3.6.1.4.1.795.50.10.1.7015.1.9 | INTEGER | read-only | Indicates whether second event block contains instance-specific data. |
| INT a7015RedundancyGroupEventType | 1.3.6.1.4.1.795.50.10.1.7015.1.1 | INTEGER | read-only | The type of Redundancy Group event that has occurred. |
| STR a7015VendorSpecificData | 1.3.6.1.4.1.795.50.10.1.7015.1.11 | DmiOctetstring | read-only | Auxiliary information related to the event. |
| STR a7016AssociatedGroup | 1.3.6.1.4.1.795.50.10.1.7016.1.5 | DmiDisplaystring | read-only | Class string of the group which originated the event. |
| INT a7016EventIsStateBased | 1.3.6.1.4.1.795.50.10.1.7016.1.3 | INTEGER | read-only | The value of this attribute determined whether the Event being reported is a state-based Event or not. If the value of this attribute is TRUE then the Event is state-based. Else the Event is not state-based |
| STR a7016EventMessage | 1.3.6.1.4.1.795.50.10.1.7016.1.10 | DmiDisplaystring | read-only | Auxiliary information related to the event. |
| INT a7016EventSeverity | 1.3.6.1.4.1.795.50.10.1.7016.1.2 | INTEGER | read-only | The severity of this event. |
| INT a7016EventSolution | 1.3.6.1.4.1.795.50.10.1.7016.1.8 | INTEGER | read-only | A solution to the problem that caused the event. |
| NUM a7016EventStateKey | 1.3.6.1.4.1.795.50.10.1.7016.1.4 | DmiInteger | read-only | This attribute holds the key identifying a row of the Event State group within the Component in which the event generator group is located. The Current State attribute within the row contains the current state of this state-based event. The current state can be one of the four severities: OK, Non-Critical, Critical, and Non-Recoverable. |
| INT a7016EventSubsystem | 1.3.6.1.4.1.795.50.10.1.7016.1.7 | INTEGER | read-only | The minor functional aspect of the product causing the fault. |
| INT a7016EventSystem | 1.3.6.1.4.1.795.50.10.1.7016.1.6 | INTEGER | read-only | The major functional aspect of the product causing the fault. |
| INT a7016InstanceDataPresent | 1.3.6.1.4.1.795.50.10.1.7016.1.9 | INTEGER | read-only | Indicates whether second event block contains instance-specific data. |
| INT a7016SpareEventType | 1.3.6.1.4.1.795.50.10.1.7016.1.1 | INTEGER | read-only | The type of Spare event that has occurred. |
| STR a7016VendorSpecificData | 1.3.6.1.4.1.795.50.10.1.7016.1.11 | DmiOctetstring | read-only | Auxiliary information related to the event. |
| NUM a7017AssociationIndex | 1.3.6.1.4.1.795.50.10.1.7017.1.1 | DmiInteger | read-only | An index into the Association table. |
| STR a7017Reference1 | 1.3.6.1.4.1.795.50.10.1.7017.1.3 | DmiDisplaystring | read-only | A reference to an object. The references shall use the format of 'x-dmi///dmi/row; cid=<>; gid=<>; key=<>'. |
| STR a7017Reference2 | 1.3.6.1.4.1.795.50.10.1.7017.1.4 | DmiDisplaystring | read-only | A reference to an object. The references shall use the format of 'x-dmi///dmi/row; cid=<>; gid=<>; key=<>'. |
| STR a7017Type | 1.3.6.1.4.1.795.50.10.1.7017.1.2 | DmiDisplaystring | read-only | This field specifies the type of the association. One of the following strings shall be used to represent a known Mass Storage Associatio type: Physical Organization, Logical Organization, Logical to Physical Organiza ion,Redundancy Organization, Spare Organization, Cache, FRU, Operational State,Statistical, SubComponentSoftware, or Worldwide Identifier. |
| STR a7018AssociatedGroup | 1.3.6.1.4.1.795.50.10.1.7018.1.5 | DmiDisplaystring | read-only | Class string of the group which originated the event. |
| INT a7018AssociationEventType | 1.3.6.1.4.1.795.50.10.1.7018.1.1 | INTEGER | read-only | The type of association where a change has occurred. |
| INT a7018EventIsStateBased | 1.3.6.1.4.1.795.50.10.1.7018.1.3 | INTEGER | read-only | The value of this attribute determined whether the Event being reported is a state-based Event or not. If the value of this attribute is TRUE then the Event is state-based. Else the Event is not state-based |
| STR a7018EventMessage | 1.3.6.1.4.1.795.50.10.1.7018.1.10 | DmiDisplaystring | read-only | Auxiliary information related to the event. |
| INT a7018EventSeverity | 1.3.6.1.4.1.795.50.10.1.7018.1.2 | INTEGER | read-only | The severity of this event. |
| INT a7018EventSolution | 1.3.6.1.4.1.795.50.10.1.7018.1.8 | INTEGER | read-only | A solution to the problem that caused the event. |
| NUM a7018EventStateKey | 1.3.6.1.4.1.795.50.10.1.7018.1.4 | DmiInteger | read-only | This attribute holds the key identifying a row of the Event State group within the Component in which the event generator group is located. The Current State attribute within the row contains the current state of this state-based event. The current state can be one of the four severities: OK, Non-Critical, Critical, and Non-Recoverable. |
| INT a7018EventSubsystem | 1.3.6.1.4.1.795.50.10.1.7018.1.7 | INTEGER | read-only | The minor functional aspect of the product causing the fault. |
| INT a7018EventSystem | 1.3.6.1.4.1.795.50.10.1.7018.1.6 | INTEGER | read-only | The association object type which is causing a change. |
| INT a7018InstanceDataPresent | 1.3.6.1.4.1.795.50.10.1.7018.1.9 | INTEGER | read-only | Indicates whether second event block contains instance-specific data. |
| STR a7018VendorSpecificData | 1.3.6.1.4.1.795.50.10.1.7018.1.11 | DmiOctetstring | read-only | Auxiliary information related to the event. |
| NUM a7019BusPortAssociationIndex | 1.3.6.1.4.1.795.50.10.1.7019.1.1 | DmiInteger | read-only | An index into the Bus Port Association table. This index is the same as the index in the Association group that defines the bus port association. |
| NUM a7019NegotiatedSpeed | 1.3.6.1.4.1.795.50.10.1.7019.1.2 | DmiInteger | read-only | The maximum burst transfer rate, in millions of bytes, which was negotiated between the two associated bus ports. |
| NUM a7019NegotiatedWidth | 1.3.6.1.4.1.795.50.10.1.7019.1.3 | DmiInteger | read-only | The width, in bits, of the bus ports data path which was negotiated between the two associated bus ports. |
| NUM a7020ComponentSpareIndex | 1.3.6.1.4.1.795.50.10.1.7020.1.1 | DmiInteger | read-only | An index into the Component Spare table. This index is the same as the index in the Association group which defines the spare association. |
| INT a7020SpareFunctioningState | 1.3.6.1.4.1.795.50.10.1.7020.1.2 | INTEGER | read-only | This field specifies the functioning state of the spare. |
| STR a7021WorldwideIdentifier | 1.3.6.1.4.1.795.50.10.1.7021.1.3 | DmiDisplaystring | read-only | The Worldwide identifier for this device. |
| NUM a7021WorldwideIdentifierIndex | 1.3.6.1.4.1.795.50.10.1.7021.1.1 | DmiInteger | read-only | An index into the Worldwide Identifier table. |
| INT a7021WorldwideIdentifierType | 1.3.6.1.4.1.795.50.10.1.7021.1.2 | INTEGER | read-only | The type of identifier displayed by the Worldwide Identifier attribute. |
| NUM a7022BlocksRead | 1.3.6.1.4.1.795.50.10.1.7022.1.2 | DmiCounter | read-only | The accumulated count of 512 byte blocks of data read. |
| NUM a7022BlocksWritten | 1.3.6.1.4.1.795.50.10.1.7022.1.3 | DmiCounter | read-only | The accumulated count of 512 byte blocks of data written. |
| NUM a7022IoRange0Read | 1.3.6.1.4.1.795.50.10.1.7022.1.6 | DmiCounter | read-only | The number of read commands issued, size < 512 bytes. |
| NUM a7022IoRange0Written | 1.3.6.1.4.1.795.50.10.1.7022.1.19 | DmiCounter | read-only | The number of write commands issued, size < 512 bytes. |
| NUM a7022IoRange10Read | 1.3.6.1.4.1.795.50.10.1.7022.1.16 | DmiCounter | read-only | The number of read commands issued, 256K bytes <= size < 512K bytes. |
| NUM a7022IoRange10Written | 1.3.6.1.4.1.795.50.10.1.7022.1.29 | DmiCounter | read-only | The number of write commands issued, 256K bytes <= size < 512K bytes. |
| NUM a7022IoRange11Read | 1.3.6.1.4.1.795.50.10.1.7022.1.17 | DmiCounter | read-only | The number of read commands issued, 512K bytes <= size < 1M bytes. |
| NUM a7022IoRange11Written | 1.3.6.1.4.1.795.50.10.1.7022.1.30 | DmiCounter | read-only | The number of write commands issued, 512K bytes <= size < 1M bytes. |
| NUM a7022IoRange12Read | 1.3.6.1.4.1.795.50.10.1.7022.1.18 | DmiCounter | read-only | The number of read commands issued, size >= 1M bytes. |
| NUM a7022IoRange12Written | 1.3.6.1.4.1.795.50.10.1.7022.1.31 | DmiCounter | read-only | The number of write commands issued, size >= 1M bytes. |
| NUM a7022IoRange1Read | 1.3.6.1.4.1.795.50.10.1.7022.1.7 | DmiCounter | read-only | The number of read commands issued, 512 bytes <= size < 1K bytes. |
| NUM a7022IoRange1Written | 1.3.6.1.4.1.795.50.10.1.7022.1.20 | DmiCounter | read-only | The number of write commands issued, 512 bytes <= size < 1K bytes. |
| NUM a7022IoRange2Read | 1.3.6.1.4.1.795.50.10.1.7022.1.8 | DmiCounter | read-only | The number of read commands issued, 1K bytes <= size < 2K bytes. |
| NUM a7022IoRange2Written | 1.3.6.1.4.1.795.50.10.1.7022.1.21 | DmiCounter | read-only | The number of write commands issued, 1K bytes <= size < 2K bytes. |
| NUM a7022IoRange3Read | 1.3.6.1.4.1.795.50.10.1.7022.1.9 | DmiCounter | read-only | The number of read commands issued, 2K bytes <= size < 4K bytes. |
| NUM a7022IoRange3Written | 1.3.6.1.4.1.795.50.10.1.7022.1.22 | DmiCounter | read-only | The number of write commands issued, 2K bytes <= size < 4K bytes. |
| NUM a7022IoRange4Read | 1.3.6.1.4.1.795.50.10.1.7022.1.10 | DmiCounter | read-only | The number of read commands issued, 4K bytes <= size < 8K bytes. |
| NUM a7022IoRange4Written | 1.3.6.1.4.1.795.50.10.1.7022.1.23 | DmiCounter | read-only | The number of write commands issued, 4K bytes <= size < 8K bytes. |
| NUM a7022IoRange5Read | 1.3.6.1.4.1.795.50.10.1.7022.1.11 | DmiCounter | read-only | The number of read commands issued, 8K bytes <= size < 16K bytes. |
| NUM a7022IoRange5Written | 1.3.6.1.4.1.795.50.10.1.7022.1.24 | DmiCounter | read-only | The number of write commands issued, 8K bytes <= size < 16K bytes. |
| NUM a7022IoRange6Read | 1.3.6.1.4.1.795.50.10.1.7022.1.12 | DmiCounter | read-only | The number of read commands issued, 16K bytes <= size < 32K bytes. |
| NUM a7022IoRange6Written | 1.3.6.1.4.1.795.50.10.1.7022.1.25 | DmiCounter | read-only | The number of write commands issued, 16K bytes <= size < 32K bytes. |
| NUM a7022IoRange7Read | 1.3.6.1.4.1.795.50.10.1.7022.1.13 | DmiCounter | read-only | The number of read commands issued, 32K bytes <= size < 64K bytes. |
| NUM a7022IoRange7Written | 1.3.6.1.4.1.795.50.10.1.7022.1.26 | DmiCounter | read-only | The number of write commands issued, 32K bytes <= size < 64K bytes. |
| NUM a7022IoRange8Read | 1.3.6.1.4.1.795.50.10.1.7022.1.14 | DmiCounter | read-only | The number of read commands issued, 64K bytes <= size < 128K bytes. |
| NUM a7022IoRange8Written | 1.3.6.1.4.1.795.50.10.1.7022.1.27 | DmiCounter | read-only | The number of write commands issued, 64K bytes <= size < 128K bytes. |
| NUM a7022IoRange9Read | 1.3.6.1.4.1.795.50.10.1.7022.1.15 | DmiCounter | read-only | The number of read commands issued, 128K bytes <= size < 256K bytes. |
| NUM a7022IoRange9Written | 1.3.6.1.4.1.795.50.10.1.7022.1.28 | DmiCounter | read-only | The number of write commands issued, 128K bytes <= size < 256K bytes. |
| NUM a7022ReadCommandsIssued | 1.3.6.1.4.1.795.50.10.1.7022.1.4 | DmiCounter | read-only | The accumulated count of the number of read commands issued. |
| NUM a7022StatisticsIndex | 1.3.6.1.4.1.795.50.10.1.7022.1.1 | DmiInteger | read-only | An index into the Statistics table. |
| NUM a7022WriteCommandsIssued | 1.3.6.1.4.1.795.50.10.1.7022.1.5 | DmiCounter | read-only | The accumulated count of the number of write commands issued. |
| INT a7023OverallStatus | 1.3.6.1.4.1.795.50.10.1.7023.1.1 | INTEGER | read-only | The overall status of the Adaptec CI/O MIF objects. |
| INT a7024AdministrativeState | 1.3.6.1.4.1.795.50.10.1.7024.1.6 | INTEGER | read-only | The administrative state of the Device Group instance. |
| INT a7024AvailabilityStatus | 1.3.6.1.4.1.795.50.10.1.7024.1.5 | INTEGER | read-only | The availability status of the Device Group instance. |
| INT a7024CurrentErrorStatus | 1.3.6.1.4.1.795.50.10.1.7024.1.10 | INTEGER | read-only | This attribute presents the current error status for this Device Group instance. The most critical error status in effect should be presented. I.e. if a part of the Device Group instance is 'Critical', while other status is 'Non-critical' then the status 'Critical' should be reported. |
| NUM a7024DeviceGroupIndex | 1.3.6.1.4.1.795.50.10.1.7024.1.2 | DmiInteger | read-only | The group ID of the group referencing this instance. |
| INT a7024DevicePredictedFailureStatus | 1.3.6.1.4.1.795.50.10.1.7024.1.11 | INTEGER | read-only | Enumeration describing the current Device Predicted Failure Status (e.g.: the S.M.A.R.T. status of the device). |
| NUM a7024FatalErrorCount | 1.3.6.1.4.1.795.50.10.1.7024.1.7 | DmiCounter | read-only | The accumulated Fatal or Non-recoverable error count for this Device Group instance. |
| NUM a7024MajorErrorCount | 1.3.6.1.4.1.795.50.10.1.7024.1.8 | DmiCounter | read-only | The accumulated Major or Critical error count for this Device Group instance. |
| NUM a7024OperationalStateIndex | 1.3.6.1.4.1.795.50.10.1.7024.1.1 | DmiInteger | read-only | The Index into the Operational State table. |
| INT a7024OperationalStatus | 1.3.6.1.4.1.795.50.10.1.7024.1.3 | INTEGER | read-only | The operational status of the Device Group instance. |
| INT a7024UsageState | 1.3.6.1.4.1.795.50.10.1.7024.1.4 | INTEGER | read-only | The usage state of the Device Group instance. |
| NUM a7024WarningErrorCount | 1.3.6.1.4.1.795.50.10.1.7024.1.9 | DmiCounter | read-only | The accumulated Warning or Non-Critical error count for this Device Group instance. |
| NUM a7025EventLogCount | 1.3.6.1.4.1.795.50.10.1.7025.1.1 | DmiInteger | read-only | Count of the number of entries in the event log table. |
| STR a7026EventLogEntry | 1.3.6.1.4.1.795.50.10.1.7026.1.2 | DmiDisplaystring | read-only | An event log entry. |
| NUM a7026EventLogIndex | 1.3.6.1.4.1.795.50.10.1.7026.1.1 | DmiInteger | read-only | The Index into the Event Log table. |
| NUM a7026EventLogTimestamp | 1.3.6.1.4.1.795.50.10.1.7026.1.3 | DmiInteger | read-only | The number of seconds that have elapsed between powerup and the event. |
| STR a7027AssociatedGroupObject | 1.3.6.1.4.1.795.50.10.1.7027.1.5 | DmiDisplaystring | read-only | Object reference to spare causing event. The references shall use the format of 'x-dmi///dmi/row; cid=<>; gid=<>; key=<>'. |
| INT a7027CurrentState | 1.3.6.1.4.1.795.50.10.1.7027.1.4 | INTEGER | read-only | Current state of the event type identified by the Event Type attribute. |
| STR a7027EventGenerationGroupClass | 1.3.6.1.4.1.795.50.10.1.7027.1.2 | DmiDisplaystring | read-only | The Class String of the event generator group. |
| NUM a7027EventStateIndex | 1.3.6.1.4.1.795.50.10.1.7027.1.1 | DmiInteger | read-only | The Index into the Event State table. |
| NUM a7027EventType | 1.3.6.1.4.1.795.50.10.1.7027.1.3 | DmiInteger | read-only | Type of the event (same as Event Type attribute in event template). |
| NUM a99DisableTrap | 1.3.6.1.4.1.795.50.10.1.99.1.3 | DmiInteger | read-write | This attribute can be changed to disable sending of traps from this component |
| STR a99MibName | 1.3.6.1.4.1.795.50.10.1.99.1.1 | DmiDisplaystring | read-only | The MIB name that defines this MIF |
| STR a99MibOid | 1.3.6.1.4.1.795.50.10.1.99.1.2 | DmiDisplaystring | read-only | The MIB Object Identifier that corresponds to this MIF |
| adaptec | 1.3.6.1.4.1.795 | |||
| dmtfGroups | 1.3.6.1.4.1.795.50.10.1 | |||
| eAggregatePhysicalExtent | 1.3.6.1.4.1.795.50.10.1.7009.1 | not-accessible | ||
| eAggregateProtectedSpaceExtent | 1.3.6.1.4.1.795.50.10.1.7010.1 | not-accessible | ||
| eAssociationEvents | 1.3.6.1.4.1.795.50.10.1.7018.1 | not-accessible | ||
| eBusPort | 1.3.6.1.4.1.795.50.10.1.7007.1 | not-accessible | ||
| eBusPortAssociation | 1.3.6.1.4.1.795.50.10.1.7019.1 | not-accessible | ||
| eBusPortEvents | 1.3.6.1.4.1.795.50.10.1.7008.1 | not-accessible | ||
| eComponentid | 1.3.6.1.4.1.795.50.10.1.1.1 | not-accessible | ||
| eComponentSpareAssociation | 1.3.6.1.4.1.795.50.10.1.7020.1 | not-accessible | ||
| eEnclosure | 1.3.6.1.4.1.795.50.10.1.7005.1 | not-accessible | ||
| eEnclosureEvents | 1.3.6.1.4.1.795.50.10.1.7006.1 | not-accessible | ||
| eEventLog | 1.3.6.1.4.1.795.50.10.1.7026.1 | not-accessible | ||
| eEventLogCount | 1.3.6.1.4.1.795.50.10.1.7025.1 | not-accessible | ||
| eEventState | 1.3.6.1.4.1.795.50.10.1.7027.1 | not-accessible | ||
| eMassStorageAssociation | 1.3.6.1.4.1.795.50.10.1.7017.1 | not-accessible | ||
| eMassStorageStatistics | 1.3.6.1.4.1.795.50.10.1.7022.1 | not-accessible | ||
| eMiftomib | 1.3.6.1.4.1.795.50.10.1.99.1 | not-accessible | ||
| eOperationalState | 1.3.6.1.4.1.795.50.10.1.7024.1 | not-accessible | ||
| eOverallStatus | 1.3.6.1.4.1.795.50.10.1.7023.1 | not-accessible | ||
| eRedundancyGroup | 1.3.6.1.4.1.795.50.10.1.7014.1 | not-accessible | ||
| eRedundancyGroupEvents | 1.3.6.1.4.1.795.50.10.1.7015.1 | not-accessible | ||
| eSpareEvents | 1.3.6.1.4.1.795.50.10.1.7016.1 | not-accessible | ||
| eStorageController | 1.3.6.1.4.1.795.50.10.1.7003.1 | not-accessible | ||
| eStorageControllerEvents | 1.3.6.1.4.1.795.50.10.1.7004.1 | not-accessible | ||
| eStorageDevices | 1.3.6.1.4.1.795.50.10.1.7001.1 | not-accessible | ||
| eStorageDevicesEvents | 1.3.6.1.4.1.795.50.10.1.7002.1 | not-accessible | ||
| eVolumeSet | 1.3.6.1.4.1.795.50.10.1.7011.1 | not-accessible | ||
| eVolumeSetActivityEvents | 1.3.6.1.4.1.795.50.10.1.7013.1 | not-accessible | ||
| eVolumeSetEvents | 1.3.6.1.4.1.795.50.10.1.7012.1 | not-accessible | ||
| eWorldwideIdentifer | 1.3.6.1.4.1.795.50.10.1.7021.1 | not-accessible | ||
| isc20 | 1.3.6.1.4.1.795.50.10 | |||
| tAggregatePhysicalExtent | 1.3.6.1.4.1.795.50.10.1.7009 | not-accessible | Summary information about the addressable logical blocks which are in the same redundancy group and reside on the same physical device. | |
| tAggregateProtectedSpaceExtent | 1.3.6.1.4.1.795.50.10.1.7010 | not-accessible | Summary information about the addressable logical blocks which are in the same volume set and are derived from the same storage device. | |
| tAssociationEvents | 1.3.6.1.4.1.795.50.10.1.7018 | not-accessible | Association events. | |
| tBusPort | 1.3.6.1.4.1.795.50.10.1.7007 | not-accessible | This global table has one entry for each of the Bus Ports in this Component. | |
| tBusPortAssociation | 1.3.6.1.4.1.795.50.10.1.7019 | not-accessible | Bus Port Association | |
| tBusPortEvents | 1.3.6.1.4.1.795.50.10.1.7008 | not-accessible | Bus Port events. | |
| tComponentid | 1.3.6.1.4.1.795.50.10.1.1 | not-accessible | This group defines the attributes common to all components. This groupis required. | |
| tComponentSpareAssociation | 1.3.6.1.4.1.795.50.10.1.7020 | not-accessible | Component Spare Association | |
| tEnclosure | 1.3.6.1.4.1.795.50.10.1.7005 | not-accessible | This group defines the enclosure in this system. | |
| tEnclosureEvents | 1.3.6.1.4.1.795.50.10.1.7006 | not-accessible | Enclosure events. | |
| tEventLog | 1.3.6.1.4.1.795.50.10.1.7026 | not-accessible | This group provides a log of previous events. | |
| tEventLogCount | 1.3.6.1.4.1.795.50.10.1.7025 | not-accessible | Count of the number of entries in the event log table. | |
| tEventState | 1.3.6.1.4.1.795.50.10.1.7027 | not-accessible | This group holds the current state for state-based events. | |
| thirdparty | 1.3.6.1.4.1.795.50 | |||
| tMassStorageAssociation | 1.3.6.1.4.1.795.50.10.1.7017 | not-accessible | Associations define the relationships between the various components of the Storage Subsystem. | |
| tMassStorageStatistics | 1.3.6.1.4.1.795.50.10.1.7022 | not-accessible | This group defines statistics that may be used by any other group. | |
| tMiftomib | 1.3.6.1.4.1.795.50.10.1.99 | not-accessible | This group defines attributes required for DMI to SNMP translati n. | |
| tOperationalState | 1.3.6.1.4.1.795.50.10.1.7024 | not-accessible | This group provides the operational state, usage, and availabili y status, and administrative state indicators for specific Device Group instance . | |
| tOverallStatus | 1.3.6.1.4.1.795.50.10.1.7023 | not-accessible | This group provides the overall status of the Adaptec CI/O MIF objects. | |
| NTF trap1ForAssociation | 1.3.6.1.4.1.795.50.10.1.7018.1.0.1 | NewObjectDetected | ||
| NTF trap1ForBusPort | 1.3.6.1.4.1.795.50.10.1.7008.1.0.1 | BusPortError | ||
| NTF trap1ForController | 1.3.6.1.4.1.795.50.10.1.7004.1.0.1 | StorageControllerError | ||
| NTF trap1ForDevices | 1.3.6.1.4.1.795.50.10.1.7002.1.0.1 | RebuildInProgress | ||
| NTF trap1ForEnclosure | 1.3.6.1.4.1.795.50.10.1.7006.1.0.1 | CioEvent | ||
| NTF trap1ForRedundancyGroup | 1.3.6.1.4.1.795.50.10.1.7015.1.0.1 | RedundancyGroupExposed | ||
| NTF trap1ForSetActivity | 1.3.6.1.4.1.795.50.10.1.7013.1.0.1 | CioEvent | ||
| NTF trap1ForSpareEvents | 1.3.6.1.4.1.795.50.10.1.7016.1.0.1 | ComponentSpareBroken | ||
| NTF trap1ForVolumeSet | 1.3.6.1.4.1.795.50.10.1.7012.1.0.1 | VolumeSetExposed | ||
| NTF trap2ForAssociation | 1.3.6.1.4.1.795.50.10.1.7018.1.0.2 | ExistingObjectReplaced | ||
| NTF trap2ForController | 1.3.6.1.4.1.795.50.10.1.7004.1.0.2 | Self-monitoringWarning1 | ||
| NTF trap2ForDevices | 1.3.6.1.4.1.795.50.10.1.7002.1.0.2 | StorageDeviceReadying | ||
| NTF trap2ForRedundancyGroup | 1.3.6.1.4.1.795.50.10.1.7015.1.0.2 | RebuildInProgress | ||
| NTF trap2ForSpareEvents | 1.3.6.1.4.1.795.50.10.1.7016.1.0.2 | ComponentSpareInUse | ||
| NTF trap2ForVolumeSet | 1.3.6.1.4.1.795.50.10.1.7012.1.0.2 | RebuildInProgress | ||
| NTF trap3ForAssociation | 1.3.6.1.4.1.795.50.10.1.7018.1.0.3 | ExistingObjectIsGone | ||
| NTF trap3ForController | 1.3.6.1.4.1.795.50.10.1.7004.1.0.3 | CioEvent | ||
| NTF trap3ForDevices | 1.3.6.1.4.1.795.50.10.1.7002.1.0.3 | StorageDeviceError | ||
| NTF trap3ForRedundancyGroup | 1.3.6.1.4.1.795.50.10.1.7015.1.0.3 | ProtectionDisabled | ||
| NTF trap3ForSpareEvents | 1.3.6.1.4.1.795.50.10.1.7016.1.0.3 | ComponentSpareReadying | ||
| NTF trap3ForVolumeSet | 1.3.6.1.4.1.795.50.10.1.7012.1.0.3 | ProtectionDisabled | ||
| NTF trap4ForDevices | 1.3.6.1.4.1.795.50.10.1.7002.1.0.4 | Self-monitoringWarning | ||
| NTF trap4ForRedundancyGroup | 1.3.6.1.4.1.795.50.10.1.7015.1.0.4 | RecalculationActive | ||
| NTF trap4ForSpareEvents | 1.3.6.1.4.1.795.50.10.1.7016.1.0.4 | CioEvent | ||
| NTF trap4ForVolumeSet | 1.3.6.1.4.1.795.50.10.1.7012.1.0.4 | VolumeSetReadying | ||
| NTF trap5ForDevices | 1.3.6.1.4.1.795.50.10.1.7002.1.0.5 | CioEvent | ||
| NTF trap5ForRedundancyGroup | 1.3.6.1.4.1.795.50.10.1.7015.1.0.5 | VerifyInProgress | ||
| NTF trap5ForVolumeSet | 1.3.6.1.4.1.795.50.10.1.7012.1.0.5 | RecalculateActive | ||
| NTF trap6ForVolumeSet | 1.3.6.1.4.1.795.50.10.1.7012.1.0.6 | SpareInUse | ||
| NTF trap7ForVolumeSet | 1.3.6.1.4.1.795.50.10.1.7012.1.0.7 | VerifyInProgress | ||
| NTF trap8ForVolumeSet | 1.3.6.1.4.1.795.50.10.1.7012.1.0.8 | VolumeSetBroken | ||
| NTF trap9ForVolumeSet | 1.3.6.1.4.1.795.50.10.1.7012.1.0.9 | CioEvent | ||
| tRedundancyGroup | 1.3.6.1.4.1.795.50.10.1.7014 | not-accessible | Redundancy Group | |
| tRedundancyGroupEvents | 1.3.6.1.4.1.795.50.10.1.7015 | not-accessible | Redundancy Group events. | |
| tSpareEvents | 1.3.6.1.4.1.795.50.10.1.7016 | not-accessible | Component Spare events. | |
| tStorageController | 1.3.6.1.4.1.795.50.10.1.7003 | not-accessible | This group defines the storage controller in this system. | |
| tStorageControllerEvents | 1.3.6.1.4.1.795.50.10.1.7004 | not-accessible | Storage Controller events. | |
| tStorageDevices | 1.3.6.1.4.1.795.50.10.1.7001 | not-accessible | This group defines the mass storage devices in this system. | |
| tStorageDevicesEvents | 1.3.6.1.4.1.795.50.10.1.7002 | not-accessible | Storage Devices events. | |
| tVolumeSet | 1.3.6.1.4.1.795.50.10.1.7011 | not-accessible | The volume set is a contiguous range of logical block addresses presented to the operating environment for reading and writing user data. A volume set may be used as a physical extent | |
| tVolumeSetActivityEvents | 1.3.6.1.4.1.795.50.10.1.7013 | not-accessible | Volume Set activity events. | |
| tVolumeSetEvents | 1.3.6.1.4.1.795.50.10.1.7012 | not-accessible | Volume Set events. | |
| tWorldwideIdentifer | 1.3.6.1.4.1.795.50.10.1.7021 | not-accessible | The Worldwide Identifer |
RFC description
Vendor-specific MIB for Adaptec CIO (Common I/O) standard group interface definition; defines management objects for Adaptec storage controller interfaces.
Start monitoring Adaptec RAID/storage controllers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.