All MIBs › ADAPTECCIOSTANDARDGROUPMIFDEFINITION2-MIB › a7010NumberOfBlocks
a7010NumberOfBlocks
Module: ADAPTECCIOSTANDARDGROUPMIFDEFINITION2-MIB
OID (symbolic): ADAPTECCIOSTANDARDGROUPMIFDEFINITION2-MIB::a7010NumberOfBlocks
OID (numeric): 1.3.6.1.4.1.795.50.10.1.7010.1.2
Node type: OBJECT-TYPE
Type: DmiInteger64X
Access: read-only
Description: The total number of user data blocks that are both located on a single storage device and part or all of a single volume set. The block size is the same as the storage device associated with this aggregate ps_extent. Note: If no volume set is associated with an aggregate ps_extent, then this number indicates the number of blocks that are available.
What is a7010NumberOfBlocks?
This large counter shows the number of blocks allocated to user data that reside on a single disk and belong to one volume set, representing the actual usable storage capacity. An engineer sums these values across all extents to calculate total accessible data space and verify that capacity matches what was provisioned. If the value is 4,194,304 blocks at 4KB each, that's 16GB of usable data capacity in this extent.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.795.50.10.1.7010.1.2 snmpwalk -v2c -c public <target> ADAPTECCIOSTANDARDGROUPMIFDEFINITION2-MIB::a7010NumberOfBlocks
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.795.50.10.1.7010.1.2.1 snmpget -v2c -c public <target> ADAPTECCIOSTANDARDGROUPMIFDEFINITION2-MIB::a7010NumberOfBlocks.1
Start monitoring Adaptec RAID/storage controllers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ADAPTECCIOSTANDARDGROUPMIFDEFINITION2-MIB::a7010NumberOfBlocks OID value, configure state conditions and alerts, and monitor any Adaptec RAID/storage controllers from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.795 | adaptec | ADAPTEC-UNIVERSAL-STORAGE-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.795.50 | thirdparty | ADAPTECCIOSTANDARDGROUPMIFDEFINITION2-MIB |
| 1.3.6.1.4.1.795.50.10 | isc20 | ADAPTECCIOSTANDARDGROUPMIFDEFINITION2-MIB |
| 1.3.6.1.4.1.795.50.10.1 | dmtfGroups | ADAPTECCIOSTANDARDGROUPMIFDEFINITION2-MIB |
| 1.3.6.1.4.1.795.50.10.1.7010 | tAggregateProtectedSpaceExtent | ADAPTECCIOSTANDARDGROUPMIFDEFINITION2-MIB |
| 1.3.6.1.4.1.795.50.10.1.7010.1 | eAggregateProtectedSpaceExtent | ADAPTECCIOSTANDARDGROUPMIFDEFINITION2-MIB |
| 1.3.6.1.4.1.795.50.10.1.7010.1.2 | a7010NumberOfBlocks | ADAPTECCIOSTANDARDGROUPMIFDEFINITION2-MIB |