All MIBs › FCFABRIC-ELEMENT-MIB
Category: Domain: Storage, Fibre Channel and Storage, Standard: IETF
Description: Fibre Channel fabric element MIB providing name server, topology, and fabric login management for FC switches.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is FCFABRIC-ELEMENT-MIB?
FCFABRIC-ELEMENT-MIB is a Fibre Channel Fabric Element MIB, part of the IETF/ANSI T11 family of standard Fibre Channel management MIBs (in the lineage of RFC 2837), used to manage fabric-level aspects of an FC switch such as its participation in the fabric name server, topology discovery, and fabric login (FLOGI) processing. It exposes objects covering fabric topology and name-server information, and login/management state for elements participating in the Fibre Channel fabric. Its monitoring value centers on fabric-level software status: whether a switch element is correctly logged into the fabric, how the fabric's name-server view of connected devices looks, and topology-related state that affects SAN connectivity. As a standards-based Fibre Channel MIB it is vendor-neutral and is typically used alongside other Fibre Channel management MIBs (such as FCMGMT-CNTL and connectivity-unit MIBs) that together provide full FC SAN visibility. It is deployed on Fibre Channel switches and directors within storage-area networks (SANs), and as an FCFABRIC-ELEMENT-MIB reference it applies broadly across vendor-neutral FC fabric monitoring in those SANs.
IPNetwork Monitor allows you to monitor SNMP objects defined in FCFABRIC-ELEMENT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- vendor-neutral, standards-based MIB; applies to Fibre Channel switches/directors in a SAN
Monitoring Examples
Specific object and table names were not available in the sampled data for this module, but based on its stated purpose an operator would poll fabric login and name-server related objects to confirm that a switch's elements have successfully logged into the fabric and that the name server's view of connected devices matches expectations. A fabric element failing login or missing from the expected name-server entries would indicate an FC connectivity or zoning problem in the SAN.
What Can Be Monitored
- fabric login state
- fabric name-server entries
- fabric topology status
This MIB depends on
Related MIBs
Imported Objects
From RFC1155-SMI
| Counter | |
| Gauge | |
| OBJECT-TYPE | |
| TimeTicks | |
| experimental |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| fibreChannel | 1.3.6.1.3.42 | |||
| fcFabric | 1.3.6.1.3.42.2 | |||
| fcFe | 1.3.6.1.3.42.2.1 | |||
| fcFeConfig | 1.3.6.1.3.42.2.1.1 | |||
| FAB fcFabricName | 1.3.6.1.3.42.2.1.1.1 | FabricName | read-only | The Name_Identifier of the Fabric to which this Fabric Element belongs. |
| FCN fcElementName | 1.3.6.1.3.42.2.1.1.2 | FcNameId | read-only | The Name_Identifier of the Fabric Element. |
| FCF fcFeModuleCapacity | 1.3.6.1.3.42.2.1.1.3 | FcFeModuleCapacity | read-only | The maximum number of modules in the Fabric Element, regardless of their current state. |
| fcFeModuleTable | 1.3.6.1.3.42.2.1.1.4 | not-accessible | A table that contains, one entry for each module in the Fabric Element, information of the modules. | |
| fcFeModuleEntry | 1.3.6.1.3.42.2.1.1.4.1 | not-accessible | An entry containing the configuration parameters of a module. | |
| FCF fcFeModuleIndex | 1.3.6.1.3.42.2.1.1.4.1.1 | FcFeModuleIndex | read-only | This object identifies the module within the Fabric Element for which this entry contains information. This value is never greater than fcFeModuleCapacity. |
| STR fcFeModuleDescr | 1.3.6.1.3.42.2.1.1.4.1.2 | DisplayString | read-only | A textual description of the module. This value should include the full name and version identification of the module. It should contain printable ASCII characters. |
| OID fcFeModuleObjectID | 1.3.6.1.3.42.2.1.1.4.1.3 | OBJECT IDENTIFIER | read-only | The vendor's authoritative identification of the module. This value may be allocated within the SMI enterprises subtree (1.3.6.1.4.1) and provides a straight-forward and unambiguous means for determining what kind of module is being managed. For example, this object could take the value 1.3.6.1.4.1.99649.3.9 if vendor 'Neufe Inc.' was assigned the subtree 1.3.6.1.4.1.99649, and had assigned the identifier 1.3.6.1.4.1.99649.3.9 to its 'FeFiFo-16 PlugInCard.' |
| INT fcFeModuleOperStatus | 1.3.6.1.3.42.2.1.1.4.1.4 | INTEGER | read-only | This object indicates the operational status of the module: online(1) the module is functioning properly; offline(2) the module is not available; testing(3) the module is under testing; and faulty(4) the module is defective in some way. |
| TIK fcFeModuleLastChange | 1.3.6.1.3.42.2.1.1.4.1.5 | TimeTicks | read-only | This object contains the value of sysUpTime when the module entered its current operational status. A value of zero indicates that the operational status of the module has not changed since the agent last restarted. |
| FCF fcFeModuleFxPortCapacity | 1.3.6.1.3.42.2.1.1.4.1.6 | FcFeFxPortCapacity | read-only | The number of FxPort that can be contained within the module. Within each module, the ports are uniquely numbered in the range from 1 to fcFeModuleFxPortCapacity inclusive. However, the numbers are not required to be contiguous. |
| FCN fcFeModuleName | 1.3.6.1.3.42.2.1.1.4.1.7 | FcNameId | read-only | The Name_Identifier of the module. |
| fcFxConfTable | 1.3.6.1.3.42.2.1.1.5 | not-accessible | A table that contains, one entry for each FxPort in the Fabric Element, configuration and service parameters of the FxPorts. | |
| fcFxConfEntry | 1.3.6.1.3.42.2.1.1.5.1 | not-accessible | An entry containing the configuration and service parameters of a FxPort. | |
| FCF fcFxConfModuleIndex | 1.3.6.1.3.42.2.1.1.5.1.1 | FcFeModuleIndex | read-only | This object identifies the module containing the FxPort for which this entry contains information. |
| FCF fcFxConfFxPortIndex | 1.3.6.1.3.42.2.1.1.5.1.2 | FcFeFxPortIndex | read-only | This object identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified FxPort until the module is re-initialized. |
| FCP fcFxPortName | 1.3.6.1.3.42.2.1.1.5.1.3 | FcPortName | read-only | The name identifier of this FxPort. Each FxPort has a unique port name within the address space of the Fabric. |
| FCP fcFxPortFcphVersionHigh | 1.3.6.1.3.42.2.1.1.5.1.4 | FcphVersion | read-only | The highest or most recent version of FC-PH that the FxPort is configured to support. |
| FCP fcFxPortFcphVersionLow | 1.3.6.1.3.42.2.1.1.5.1.5 | FcphVersion | read-only | The lowest or earliest version of FC-PH that the FxPort is configured to support. |
| FCB fcFxPortBbCredit | 1.3.6.1.3.42.2.1.1.5.1.6 | FcBbCredit | read-only | The total number of receive buffers available for holding Class 1 connect-request, Class 2 or 3 frames from the attached NxPort. It is for buffer-to-buffer flow control in the direction from the attached NxPort (if applicable) to FxPort. |
| FCR fcFxPortRxBufSize | 1.3.6.1.3.42.2.1.1.5.1.7 | FcRxDataFieldSize | read-only | The largest Data_Field Size (in octets) for an FT_1 frame that can be received by the FxPort. |
| MIL fcFxPortRatov | 1.3.6.1.3.42.2.1.1.5.1.8 | MilliSeconds | read-only | The Resource_Allocation_Timeout Value configured for the FxPort. This is used as the timeout value for determining when to reuse an NxPort resource such as a Recovery_Qualifier. It represents E_D_TOV (see next object) plus twice the maximum time that a frame may be delayed within the Fabric and still be delivered. |
| MIL fcFxPortEdtov | 1.3.6.1.3.42.2.1.1.5.1.9 | MilliSeconds | read-only | The E_D_TOV value configured for the FxPort. The Error_Detect_Timeout Value is used as the timeout value for detecting an error condition. |
| FCC fcFxPortCosSupported | 1.3.6.1.3.42.2.1.1.5.1.10 | FcCosCap | read-only | A value indicating the set of Classes of Service supported by the FxPort. |
| INT fcFxPortIntermixSupported | 1.3.6.1.3.42.2.1.1.5.1.11 | INTEGER | read-only | A flag indicating whether or not the FxPort supports an Intermixed Dedicated Connection. |
| FCS fcFxPortStackedConnMode | 1.3.6.1.3.42.2.1.1.5.1.12 | FcStackedConnMode | read-only | A value indicating the mode of Stacked Connect supported by the FxPort. |
| INT fcFxPortClass2SeqDeliv | 1.3.6.1.3.42.2.1.1.5.1.13 | INTEGER | read-only | A flag indicating whether or not Class 2 Sequential Delivery is supported by the FxPort. |
| INT fcFxPortClass3SeqDeliv | 1.3.6.1.3.42.2.1.1.5.1.14 | INTEGER | read-only | A flag indicating whether or not Class 3 Sequential Delivery is supported by the FxPort. |
| MIC fcFxPortHoldTime | 1.3.6.1.3.42.2.1.1.5.1.15 | MicroSeconds | read-only | The maximum time (in microseconds) that the FxPort shall hold a frame before discarding the frame if it is unable to deliver the frame. The value 0 means that the FxPort does not support this parameter. |
| FC0 fcFxPortBaudRate | 1.3.6.1.3.42.2.1.1.5.1.16 | Fc0BaudRate | read-only | The FC-0 baud rate of the FxPort. |
| FC0 fcFxPortMedium | 1.3.6.1.3.42.2.1.1.5.1.17 | Fc0Medium | read-only | The FC-0 medium of the FxPort. |
| FC0 fcFxPortTxType | 1.3.6.1.3.42.2.1.1.5.1.18 | Fc0TxType | read-only | The FC-0 transmitter type of the FxPort. |
| FC0 fcFxPortDistance | 1.3.6.1.3.42.2.1.1.5.1.19 | Fc0Distance | read-only | The FC-0 distance range of the FxPort transmitter. |
| fcFeOp | 1.3.6.1.3.42.2.1.2 | |||
| fcFxPortOperTable | 1.3.6.1.3.42.2.1.2.1 | not-accessible | A table that contains, one entry for each FxPort in the Fabric Element, operational status and parameters of the FxPorts. | |
| fcFxPortOperEntry | 1.3.6.1.3.42.2.1.2.1.1 | not-accessible | An entry containing operational status and parameters of a FxPort. | |
| FCF fcFxPortOperModuleIndex | 1.3.6.1.3.42.2.1.2.1.1.1 | FcFeModuleIndex | read-only | This object identifies the module containing the FxPort for which this entry contains information. |
| FCF fcFxPortOperFxPortIndex | 1.3.6.1.3.42.2.1.2.1.1.2 | FcFeFxPortIndex | read-only | This object identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified FxPort until the module is re-initialized. |
| ADR fcFxPortID | 1.3.6.1.3.42.2.1.2.1.1.3 | FcAddressId | read-only | The address identifier by which this FxPort is identified within the Fabric. The FxPort may assign its address identifier to its attached NxPort(s) during Fabric Login. |
| FCP fcFPortAttachedPortName | 1.3.6.1.3.42.2.1.2.1.1.4 | FcPortName | read-only | The port name of the attached N_Port, if applicable. If the value of this object is '0000000000000000'H, this FxPort has no NxPort attached to it. This variable has been deprecated and may be implemented for backward compability. |
| ADR fcFPortConnectedPort | 1.3.6.1.3.42.2.1.2.1.1.5 | FcAddressId | read-only | The address identifier of the destination FxPort with which this FxPort is currently engaged in a either a Class 1 or loop connection. If the value of this object is '000000'H, this FxPort is not engaged in a connection. This variable has been deprecated and may be implemented for backward compability. |
| GAU fcFxPortBbCreditAvailable | 1.3.6.1.3.42.2.1.2.1.1.6 | Gauge | read-only | The number of buffers currently available for receiving frames from the attached port in the buffer-to-buffer flow control. The value should be less than or equal to fcFxPortBbCredit. |
| FCF fcFxPortOperMode | 1.3.6.1.3.42.2.1.2.1.1.7 | FcFxPortMode | read-only | The current operational mode of the FxPort. |
| FCF fcFxPortAdminMode | 1.3.6.1.3.42.2.1.2.1.1.8 | FcFxPortMode | read-only | The desired operational mode of the FxPort. |
| fcFxPortPhysTable | 1.3.6.1.3.42.2.1.2.3 | not-accessible | A table that contains, one entry for each FxPort in the Fabric Element, physical level status and parameters of the FxPorts. | |
| fcFxPortPhysEntry | 1.3.6.1.3.42.2.1.2.3.1 | not-accessible | An entry containing physical level status and parameters of a FxPort. | |
| FCF fcFxPortPhysModuleIndex | 1.3.6.1.3.42.2.1.2.3.1.1 | FcFeModuleIndex | read-only | This object identifies the module containing the FxPort for which this entry contains information. |
| FCF fcFxPortPhysFxPortIndex | 1.3.6.1.3.42.2.1.2.3.1.2 | FcFeFxPortIndex | read-only | This object identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified FxPort until the module is re-initialized. |
| INT fcFxPortPhysAdminStatus | 1.3.6.1.3.42.2.1.2.3.1.3 | INTEGER | read-write | The desired state of the FxPort. A management station may place the FxPort in a desired state by setting this object accordingly. The testing(3) state indicates that no operational frames can be passed. When a Fabric Element initializes, all FxPorts start with fcFxPortPhysAdminStatus in the offline(2) state. As the result of either explicit management action or per configuration information accessible by the Fabric Element, fcFxPortPhysAdminStatus is then changed to either the online(1) or testing(3) states, or remains in the offline state. |
| INT fcFxPortPhysOperStatus | 1.3.6.1.3.42.2.1.2.3.1.4 | INTEGER | read-only | The current operational status of the FxPort. The testing(3) indicates that no operational frames can be passed. If fcFxPortPhysAdminStatus is offline(2) then fcFxPortPhysOperStatus should be offline(2). If fcFxPortPhysAdminStatus is changed to online(1) then fcFxPortPhysOperStatus should change to online(1) if the FxPort is ready to accept Fabric Login request from the attached NxPort; it should proceed and remain in the link-failure(4) state if and only if there is a fault that prevents it from going to the online(1) state. |
| TIK fcFxPortPhysLastChange | 1.3.6.1.3.42.2.1.2.3.1.5 | TimeTicks | read-only | The value of sysUpTime at the time the FxPort entered its current operational status. A value of zero indicates that the FxPort's operational status has not changed since the agent last restarted. |
| MIL fcFxPortPhysRttov | 1.3.6.1.3.42.2.1.2.3.1.6 | MilliSeconds | read-only | The Receiver_Transmitter_Timeout value of the FxPort. This is used by the receiver logic to detect Loss of Synchronization. |
| fcFxlogiTable | 1.3.6.1.3.42.2.1.2.4 | not-accessible | A table that contains, one entry for each FxPort in the Fabric Element, services parameters established from the most recent Fabric Login, explicit or implicit. | |
| fcFxlogiEntry | 1.3.6.1.3.42.2.1.2.4.1 | not-accessible | An entry containing service parameters established from a successful Fabric Login. | |
| FCF fcFxlogiModuleIndex | 1.3.6.1.3.42.2.1.2.4.1.1 | FcFeModuleIndex | read-only | This object identifies the module containing the FxPort for which this entry contains information. |
| FCF fcFxlogiFxPortIndex | 1.3.6.1.3.42.2.1.2.4.1.2 | FcFeFxPortIndex | read-only | This object identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified FxPort until the module is re-initialized. |
| FCF fcFxlogiNxPortIndex | 1.3.6.1.3.42.2.1.2.4.1.3 | FcFeNxPortIndex | read-only | The object identifies the associated NxPort in the attachment for which the entry contains information. |
| FCP fcFxPortFcphVersionAgreed | 1.3.6.1.3.42.2.1.2.4.1.4 | FcphVersion | read-only | The version of FC-PH that the FxPort has agreed to support from the Fabric Login |
| FCB fcFxPortNxPortBbCredit | 1.3.6.1.3.42.2.1.2.4.1.5 | FcBbCredit | read-only | The total number of buffers available for holding Class 1 connect-request, Class 2 or Class 3 frames to be transmitted to the attached NxPort. It is for buffer- to-buffer flow control in the direction from FxPort to NxPort. The buffer-to-buffer flow control mechanism is indicated in the respective fcFxPortBbCreditModel. [1](23.6.2.2) |
| FCR fcFxPortNxPortRxDataFieldSize | 1.3.6.1.3.42.2.1.2.4.1.6 | FcRxDataFieldSize | read-only | The Receive Data Field Size of the attached NxPort. This is a binary value that specifies the largest Data Field Size for an FT_1 frame that can be received by the NxPort. The value is in number of bytes and ranges from 128 to 2112 inclusive. |
| FCC fcFxPortCosSuppAgreed | 1.3.6.1.3.42.2.1.2.4.1.7 | FcCosCap | read-only | A variable indicating that the attached NxPort has requested the FxPort for the support of classes of services and the FxPort has granted the request. |
| INT fcFxPortIntermixSuppAgreed | 1.3.6.1.3.42.2.1.2.4.1.8 | INTEGER | read-only | A variable indicating that the attached NxPort has requested the FxPort for the support of Intermix and the FxPort has granted the request. This flag is only valid if Class 1 service is supported. |
| FCS fcFxPortStackedConnModeAgreed | 1.3.6.1.3.42.2.1.2.4.1.9 | FcStackedConnMode | read-only | A variable indicating whether the FxPort has agreed to support stacked connect from the Fabric Login. This is only meaningful if Class 1 service has been agreed. |
| INT fcFxPortClass2SeqDelivAgreed | 1.3.6.1.3.42.2.1.2.4.1.10 | INTEGER | read-only | A variable indicating whether the FxPort has agreed to support Class 2 sequential delivery from the Fabric Login. This is only meaningful if Class 2 service has been agreed. |
| INT fcFxPortClass3SeqDelivAgreed | 1.3.6.1.3.42.2.1.2.4.1.11 | INTEGER | read-only | A flag indicating whether the FxPort has agreed to support Class 3 sequential delivery from the Fabric Login. This is only meaningful if Class 3 service has been agreed. |
| FCP fcFxPortNxPortName | 1.3.6.1.3.42.2.1.2.4.1.12 | FcPortName | read-only | The port name of the attached NxPort, if applicable. If the value of this object is '0000000000000000'H, this FxPort has no NxPort attached to it. |
| ADR fcFxPortConnectedNxPort | 1.3.6.1.3.42.2.1.2.4.1.13 | FcAddressId | read-only | The address identifier of the destination FxPort with which this FxPort is currently engaged in a either a Class 1 or loop connection. If the value of this object is '000000'H, this FxPort is not engaged in a connection. |
| FCB fcFxPortBbCreditModel | 1.3.6.1.3.42.2.1.2.4.1.14 | FcBbCreditModel | read-only | This object identifies the BB_Credit model used by the FxPort. The regular model refers to the Buffer-to-Buffer flow control mechanism defined in FC-PH [1] is used between the F_Port and the N_Port. For FL_Ports, the Alternate Buffer-to-Buffer flow control mechanism as defined in FC-AL [4] is used between the FL_Port and any attached NL_Ports. |
| fcFeError | 1.3.6.1.3.42.2.1.3 | |||
| fcFxPortErrorTable | 1.3.6.1.3.42.2.1.3.1 | not-accessible | A table that contains, one entry for each FxPort, counters that record the numbers of errors detected. | |
| fcFxPortErrorEntry | 1.3.6.1.3.42.2.1.3.1.1 | not-accessible | An entry containing error counters of a FxPort. | |
| FCF fcFxPortErrorModuleIndex | 1.3.6.1.3.42.2.1.3.1.1.1 | FcFeModuleIndex | read-only | This object identifies the module containing the FxPort for which this entry contains information. |
| FCF fcFxPortErrorFxPortIndex | 1.3.6.1.3.42.2.1.3.1.1.2 | FcFeFxPortIndex | read-only | This object identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified FxPort until the module is re-initialized. |
| CTR fcFxPortLinkFailures | 1.3.6.1.3.42.2.1.3.1.1.3 | Counter | read-only | The number of link failures detected by this FxPort. |
| CTR fcFxPortSyncLosses | 1.3.6.1.3.42.2.1.3.1.1.4 | Counter | read-only | The number of loss of synchronization detected by the FxPort. |
| CTR fcFxPortSigLosses | 1.3.6.1.3.42.2.1.3.1.1.5 | Counter | read-only | The number of loss of signal detected by the FxPort. |
| CTR fcFxPortPrimSeqProtoErrors | 1.3.6.1.3.42.2.1.3.1.1.6 | Counter | read-only | The number of primitive sequence protocol errors detected by the FxPort. |
| CTR fcFxPortInvalidTxWords | 1.3.6.1.3.42.2.1.3.1.1.7 | Counter | read-only | The number of invalid transmission word detected by the FxPort. |
| CTR fcFxPortInvalidCrcs | 1.3.6.1.3.42.2.1.3.1.1.8 | Counter | read-only | The number of invalid CRC detected by this FxPort. |
| CTR fcFxPortDelimiterErrors | 1.3.6.1.3.42.2.1.3.1.1.9 | Counter | read-only | The number of Delimiter Errors detected by this FxPort. |
| CTR fcFxPortAddressIdErrors | 1.3.6.1.3.42.2.1.3.1.1.10 | Counter | read-only | The number of address identifier errors detected by this FxPort. |
| CTR fcFxPortLinkResetIns | 1.3.6.1.3.42.2.1.3.1.1.11 | Counter | read-only | The number of Link Reset Protocol received by this FxPort from the attached NxPort. |
| CTR fcFxPortLinkResetOuts | 1.3.6.1.3.42.2.1.3.1.1.12 | Counter | read-only | The number of Link Reset Protocol issued by this FxPort to the attached NxPort. |
| CTR fcFxPortOlsIns | 1.3.6.1.3.42.2.1.3.1.1.13 | Counter | read-only | The number of Offline Sequence received by this FxPort. |
| CTR fcFxPortOlsOuts | 1.3.6.1.3.42.2.1.3.1.1.14 | Counter | read-only | The number of Offline Sequence issued by this FxPort. |
| fcFeAcct | 1.3.6.1.3.42.2.1.4 | |||
| fcFxPortC1AcctTable | 1.3.6.1.3.42.2.1.4.1 | not-accessible | A table that contains, one entry for each FxPort in the Fabric Element, Class 1 accounting information recorded since the management agent has re-initialized. | |
| fcFxPortC1AcctEntry | 1.3.6.1.3.42.2.1.4.1.1 | not-accessible | An entry containing Class 1 accounting information for each FxPort. | |
| FCF fcFxPortC1AcctModuleIndex | 1.3.6.1.3.42.2.1.4.1.1.1 | FcFeModuleIndex | read-only | This object identifies the module containing the FxPort for which this entry contains information. |
| FCF fcFxPortC1AcctFxPortIndex | 1.3.6.1.3.42.2.1.4.1.1.2 | FcFeFxPortIndex | read-only | This object identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified FxPort until the module is re-initialized. |
| CTR fcFxPortC1InConnections | 1.3.6.1.3.42.2.1.4.1.1.3 | Counter | read-only | The number of Class 1 connections successfully established in which the attached NxPort is the source of the connect-request. |
| CTR fcFxPortC1OutConnections | 1.3.6.1.3.42.2.1.4.1.1.4 | Counter | read-only | The number of Class 1 connections successfully established in which the attached NxPort is the destination of the connect-request. |
| CTR fcFxPortC1FbsyFrames | 1.3.6.1.3.42.2.1.4.1.1.5 | Counter | read-only | The number of F_BSY frames generated by this FxPort against Class 1 connect-request. |
| CTR fcFxPortC1FrjtFrames | 1.3.6.1.3.42.2.1.4.1.1.6 | Counter | read-only | The number of F_RJT frames generated by this FxPort against Class 1 connect-request. |
| CTR fcFxPortC1ConnTime | 1.3.6.1.3.42.2.1.4.1.1.7 | Counter | read-only | The cumulative time that this FxPort has been engaged in Class 1 connection. The amount of time of each connection is counted in octets from after a connect- request has been accepted until the connection is disengaged, either by an EOFdt or Link Reset. |
| CTR fcFxPortC1InFrames | 1.3.6.1.3.42.2.1.4.1.1.8 | Counter | read-only | The number of Class 1 frames (other than Class 1 connect-request) received by this FxPort from its attached NxPort. |
| CTR fcFxPortC1OutFrames | 1.3.6.1.3.42.2.1.4.1.1.9 | Counter | read-only | The number of Class 1 frames (other than Class 1 connect-request) delivered through this FxPort to its attached NxPort. |
| CTR fcFxPortC1InOctets | 1.3.6.1.3.42.2.1.4.1.1.10 | Counter | read-only | The number of Class 1 frame octets, including the frame delimiters, received by this FxPort from its attached NxPort. |
| CTR fcFxPortC1OutOctets | 1.3.6.1.3.42.2.1.4.1.1.11 | Counter | read-only | The number of Class 1 frame octets, including the frame delimiters, delivered through this FxPort its attached NxPort. |
| CTR fcFxPortC1Discards | 1.3.6.1.3.42.2.1.4.1.1.12 | Counter | read-only | The number of Class 1 frames discarded by this FxPort. |
| fcFxPortC2AcctTable | 1.3.6.1.3.42.2.1.4.2 | not-accessible | A table that contains, one entry for each FxPort in the Fabric Element, Class 2 accounting information recorded since the management agent has re-initialized. | |
| fcFxPortC2AcctEntry | 1.3.6.1.3.42.2.1.4.2.1 | not-accessible | An entry containing Class 2 accounting information for each FxPort. | |
| FCF fcFxPortC2AcctModuleIndex | 1.3.6.1.3.42.2.1.4.2.1.1 | FcFeModuleIndex | read-only | This object identifies the module containing the FxPort for which this entry contains information. |
| FCF fcFxPortC2AcctFxPortIndex | 1.3.6.1.3.42.2.1.4.2.1.2 | FcFeFxPortIndex | read-only | This object identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified FxPort until the module is re-initialized. |
| CTR fcFxPortC2InFrames | 1.3.6.1.3.42.2.1.4.2.1.3 | Counter | read-only | The number of Class 2 frames received by this FxPort from its attached NxPort. |
| CTR fcFxPortC2OutFrames | 1.3.6.1.3.42.2.1.4.2.1.4 | Counter | read-only | The number of Class 2 frames delivered through this FxPort to its attached NxPort. |
| CTR fcFxPortC2InOctets | 1.3.6.1.3.42.2.1.4.2.1.5 | Counter | read-only | The number of Class 2 frame octets, including the frame delimiters, received by this FxPort from its attached NxPort. |
| CTR fcFxPortC2OutOctets | 1.3.6.1.3.42.2.1.4.2.1.6 | Counter | read-only | The number of Class 2 frame octets, including the frame delimiters, delivered through this FxPort to its attached NxPort. |
| CTR fcFxPortC2Discards | 1.3.6.1.3.42.2.1.4.2.1.7 | Counter | read-only | The number of Class 2 frames discarded by this FxPort. |
| CTR fcFxPortC2FbsyFrames | 1.3.6.1.3.42.2.1.4.2.1.8 | Counter | read-only | The number of F_BSY frames generated by this FxPort against Class 2 frames. |
| CTR fcFxPortC2FrjtFrames | 1.3.6.1.3.42.2.1.4.2.1.9 | Counter | read-only | The number of F_RJT frames generated by this FxPort against Class 2 frames. |
| fcFxPortC3AcctTable | 1.3.6.1.3.42.2.1.4.3 | not-accessible | A table that contains, one entry for each FxPort in the Fabric Element, Class 3 accounting information recorded since the management agent has re-initialized. | |
| fcFxPortC3AcctEntry | 1.3.6.1.3.42.2.1.4.3.1 | not-accessible | An entry containing Class 3 accounting information for each FxPort. | |
| FCF fcFxPortC3AcctModuleIndex | 1.3.6.1.3.42.2.1.4.3.1.1 | FcFeModuleIndex | read-only | This object identifies the module containing the FxPort for which this entry contains information. |
| FCF fcFxPortC3AcctFxPortIndex | 1.3.6.1.3.42.2.1.4.3.1.2 | FcFeFxPortIndex | read-only | This object identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified FxPort until the module is re-initialized. |
| CTR fcFxPortC3InFrames | 1.3.6.1.3.42.2.1.4.3.1.3 | Counter | read-only | The number of Class 3 frames received by this FxPort from its attached NxPort. |
| CTR fcFxPortC3OutFrames | 1.3.6.1.3.42.2.1.4.3.1.4 | Counter | read-only | The number of Class 3 frames delivered through this FxPort to its attached NxPort. |
| CTR fcFxPortC3InOctets | 1.3.6.1.3.42.2.1.4.3.1.5 | Counter | read-only | The number of Class 3 frame octets, including the frame delimiters, received by this FxPort from its attached NxPort. |
| CTR fcFxPortC3OutOctets | 1.3.6.1.3.42.2.1.4.3.1.6 | Counter | read-only | The number of Class 3 frame octets, including the frame delimiters, delivered through this FxPort to its attached NxPort. |
| CTR fcFxPortC3Discards | 1.3.6.1.3.42.2.1.4.3.1.7 | Counter | read-only | The number of Class 3 frames discarded by this FxPort. |
| fcFeCap | 1.3.6.1.3.42.2.1.5 | |||
| fcFxPortCapTable | 1.3.6.1.3.42.2.1.5.1 | not-accessible | A table that contains, one entry for each FxPort, the capabilities of the port within the Fabric Element. | |
| fcFxPortCapEntry | 1.3.6.1.3.42.2.1.5.1.1 | not-accessible | An entry containing the capabilities of a FxPort. | |
| FCF fcFxPortCapModuleIndex | 1.3.6.1.3.42.2.1.5.1.1.1 | FcFeModuleIndex | read-only | This object identifies the module containing the FxPort for which this entry contains information. |
| FCF fcFxPortCapFxPortIndex | 1.3.6.1.3.42.2.1.5.1.1.2 | FcFeFxPortIndex | read-only | This object identifies the FxPort within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified FxPort until the module is re-initialized. |
| FCP fcFxPortCapFcphVersionHigh | 1.3.6.1.3.42.2.1.5.1.1.3 | FcphVersion | read-only | The highest or most recent version of FC-PH that the FxPort is capable of supporting. |
| FCP fcFxPortCapFcphVersionLow | 1.3.6.1.3.42.2.1.5.1.1.4 | FcphVersion | read-only | The lowest or earliest version of FC-PH that the FxPort is capable of supporting. |
| FCB fcFxPortCapBbCreditMax | 1.3.6.1.3.42.2.1.5.1.1.5 | FcBbCredit | read-only | The maximum number of receive buffers available for holding Class 1 connect-request, Class 2 or Class 3 frames from the attached NxPort. |
| FCB fcFxPortCapBbCreditMin | 1.3.6.1.3.42.2.1.5.1.1.6 | FcBbCredit | read-only | The minimum number of receive buffers available for holding Class 1 connect-request, Class 2 or Class 3 frames from the attached NxPort. |
| FCR fcFxPortCapRxDataFieldSizeMax | 1.3.6.1.3.42.2.1.5.1.1.7 | FcRxDataFieldSize | read-only | The maximum size in bytes of the Data Field in a frame that the FxPort is capable of receiving from its attached NxPort. |
| FCR fcFxPortCapRxDataFieldSizeMin | 1.3.6.1.3.42.2.1.5.1.1.8 | FcRxDataFieldSize | read-only | The minimum size in bytes of the Data Field in a frame that the FxPort is capable of receiving from its attached NxPort. |
| FCC fcFxPortCapCos | 1.3.6.1.3.42.2.1.5.1.1.9 | FcCosCap | read-only | A value indicating the set of Classes of Service that the FxPort is capable of supporting. |
| INT fcFxPortCapIntermix | 1.3.6.1.3.42.2.1.5.1.1.10 | INTEGER | read-only | A flag indicating whether or not the FxPort is capable of supporting the intermixing of Class 2 and Class 3 frames during a Class 1 connection. This flag is only valid if the port is capable of supporting Class 1 service. |
| FCS fcFxPortCapStackedConnMode | 1.3.6.1.3.42.2.1.5.1.1.11 | FcStackedConnMode | read-only | A value indicating the mode of Stacked Connect request that the FxPort is capable of supporting. |
| INT fcFxPortCapClass2SeqDeliv | 1.3.6.1.3.42.2.1.5.1.1.12 | INTEGER | read-only | A flag indicating whether or not the FxPort is capable of supporting Class 2 Sequential Delivery. |
| INT fcFxPortCapClass3SeqDeliv | 1.3.6.1.3.42.2.1.5.1.1.13 | INTEGER | read-only | A flag indicating whether or not the FxPort is capable of supporting Class 3 Sequential Delivery. |
| MIC fcFxPortCapHoldTimeMax | 1.3.6.1.3.42.2.1.5.1.1.14 | MicroSeconds | read-only | The maximum holding time (in microseconds) that the FxPort is capable of supporting. |
| MIC fcFxPortCapHoldTimeMin | 1.3.6.1.3.42.2.1.5.1.1.15 | MicroSeconds | read-only | The minimum holding time (in microseconds) that the FxPort is capable of supporting. |
| FC0 fcFxPortCapBaudRates | 1.3.6.1.3.42.2.1.5.1.1.16 | Fc0BaudRateCap | read-only | A value indicating the set of baud rates that the FxPort is capable of supporting. This variable has been deprecated and may be implemented for backward compability. |
| FC0 fcFxPortCapMedia | 1.3.6.1.3.42.2.1.5.1.1.17 | Fc0MediaCap | read-only | A value indicating the set of media that the FxPort is capable of supporting. This variable has been deprecated and may be implemented for backward compability. |
RFC description
Manages Fibre Channel fabric element (switch) configuration, operations, errors, and accounting in storage area networks.
Start monitoring Vendor-neutral Fibre Channel switch/director, any manufacturer (fabric element/name-server) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.