ADAPTECDURALINK-MIB

All MIBs › ADAPTECDURALINK-MIB

Category: Fibre Channel and Storage, Vendor: Adaptec

Description: Manages Adaptec DuraLink high-availability storage link controllers, providing redundancy status and failover configuration objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ADAPTECDURALINK-MIB?

ADAPTECDURALINK-MIB is a vendor MIB from Adaptec for the DuraLink family of high-availability storage interconnect controllers used to provide redundant links between hosts and storage arrays. It establishes the enterprise OID branch (adaptec, products, nic, npg, duralink) under which link redundancy, active/standby path, and failover configuration objects are registered. The general categories of data such a module is designed to expose are hardware redundancy status, active-link/failover state, and configuration controls for the dual-controller storage link. Its main monitoring value is hardware health of the storage interconnect -- confirming which path is currently active and whether a failover has occurred, since loss of redundancy here directly threatens storage availability. No dependency on other standard MIBs is evident from the available source, and the module would typically be deployed in dual-controller SCSI/storage subsystems protecting against single-path failure. Engineers can download the ADAPTECDURALINK-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ADAPTECDURALINK-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Adaptec DuraLink storage link controller (dual-controller storage interconnect)

Monitoring Examples

The sampled object identifiers (adaptec, products, nic, npg, duralink) are top-level registration branches rather than leaf/table objects, so the specific monitoring tables are not visible from this data. In practice such a module would define a link/controller status table under the duralink branch reporting active-path and failover-count style objects, though no such table names are confirmed here. An administrator managing dual DuraLink storage link controllers would still poll under this branch for path/failover state to confirm the standby path is healthy before a scheduled failover test.

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
enterprises

From RFC1213-MIB

DisplayString
PhysAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
adaptec	1.3.6.1.4.1.795
products	1.3.6.1.4.1.795.3
nic	1.3.6.1.4.1.795.3.1
npg	1.3.6.1.4.1.795.3.1.2
duralink	1.3.6.1.4.1.795.3.1.2.3
NTF duralinkStatusTrap	1.3.6.1.4.1.795.3.1.2.3.0.1			The port status has changed.
information	1.3.6.1.4.1.795.3.1.2.3.1
INT numInterfaces	1.3.6.1.4.1.795.3.1.2.3.1.1	INTEGER	read-only	The number of Adaptec network interfaces present on this system.
INT numPorts	1.3.6.1.4.1.795.3.1.2.3.1.2	INTEGER	read-only	The number of Adaptec network ports present on this system.
INT numCards	1.3.6.1.4.1.795.3.1.2.3.1.3	INTEGER	read-only	The number of Adaptec network adapters present on this system.
interfaceStatsTable	1.3.6.1.4.1.795.3.1.2.3.2		not-accessible	The table listing Adaptec network interface statistics.
interfaceStatsEntry	1.3.6.1.4.1.795.3.1.2.3.2.1		not-accessible	Each entry lists statistics for a single network interface.
INT iInterfaceIndex	1.3.6.1.4.1.795.3.1.2.3.2.1.1	INTEGER	read-only	A unique value assigned to each interface This is an increasing numeric value ranging between 1 and the value of NumInterfaces.
STR iInterfaceName	1.3.6.1.4.1.795.3.1.2.3.2.1.2	DisplayString	read-only	The descriptive name assigned to the interface at the time the interface was configured.
INT iInterfacePorts	1.3.6.1.4.1.795.3.1.2.3.2.1.3	INTEGER	read-only	The number of ports in the interface. An interface may consist of one or more ports.
PHY iPermNetAddress	1.3.6.1.4.1.795.3.1.2.3.2.1.4	PhysAddress	read-only	The permanent network address assigned to this interface. This is the node address stored permanently in the adapter.
PHY iCurrentNetAddress	1.3.6.1.4.1.795.3.1.2.3.2.1.5	PhysAddress	read-only	The network address currently assigned this interface. This address may be administered by software.
INT iDataRate	1.3.6.1.4.1.795.3.1.2.3.2.1.6	INTEGER	read-only	This is the rate at which data is transferred over this interface, measured in MPBS.
CTR iTotalPacketsTransmitted	1.3.6.1.4.1.795.3.1.2.3.2.1.7	Counter	read-only	This is the total number of packets transmitted over this interface.
CTR iTotalBytesTransmitted	1.3.6.1.4.1.795.3.1.2.3.2.1.8	Counter	read-only	This is the total number of bytes transmitted over this interface.
CTR iTotalPacketsReceived	1.3.6.1.4.1.795.3.1.2.3.2.1.9	Counter	read-only	This is the total number of packets received over this interface.
CTR iTotalBytesReceived	1.3.6.1.4.1.795.3.1.2.3.2.1.10	Counter	read-only	This is the total number of bytes received over this interface.
CTR iTotalTransmitErrors	1.3.6.1.4.1.795.3.1.2.3.2.1.11	Counter	read-only	This is the total number of Transmit errors seen on this interface.
CTR iTotalReceiveErrors	1.3.6.1.4.1.795.3.1.2.3.2.1.12	Counter	read-only	This is the total number of Receive errors seen on this interface.
INT iInterfaceType	1.3.6.1.4.1.795.3.1.2.3.2.1.13	INTEGER	read-only	This is the interface type. standalone indicates a single port configuration. failover indicates a two port group supporting failover resiliency. loadBalanced indicates a multiple port group providing load balancing.
portStatsTable	1.3.6.1.4.1.795.3.1.2.3.3		not-accessible	The table listing Adaptec network port statistics.
portStatsEntry	1.3.6.1.4.1.795.3.1.2.3.3.1		not-accessible	Each entry lists statistics for a single network port.
INT pInterfaceIndex	1.3.6.1.4.1.795.3.1.2.3.3.1.1	INTEGER	read-only	A unique value assigned to each interface This is an increasing numeric value ranging between 1 and the value of NumInterfaces.
INT pPortIndex	1.3.6.1.4.1.795.3.1.2.3.3.1.2	INTEGER	read-only	A unique value assigned to each port on a particular interface. This is an increasing numeric value ranging between 1 and the value of iInterfacePorts for the interface indexed by iInterfaceIndex.
STR pPortName	1.3.6.1.4.1.795.3.1.2.3.3.1.3	DisplayString	read-only	The descriptive name assigned to the port. This may not be supported by all operating systems.
INT pCardNumber	1.3.6.1.4.1.795.3.1.2.3.3.1.4	INTEGER	read-only	The value of cpCardIndex that corresponds to this port.
INT pCardPortNumber	1.3.6.1.4.1.795.3.1.2.3.3.1.5	INTEGER	read-only	The value of cpPortIndex that corresponds to this port.
PHY pPermNetAddress	1.3.6.1.4.1.795.3.1.2.3.3.1.6	PhysAddress	read-only	The permanent network address assigned to this port. This is the node address stored permanently in the adapter.
PHY pCurrentNetAddress	1.3.6.1.4.1.795.3.1.2.3.3.1.7	PhysAddress	read-only	The network address currently assigned to this port. This address may be administered by software.
INT pDataRate	1.3.6.1.4.1.795.3.1.2.3.3.1.8	INTEGER	read-only	This is the rate at which data is transferred over this port, measured in MPBS.
CTR pTotalPacketsTransmitted	1.3.6.1.4.1.795.3.1.2.3.3.1.9	Counter	read-only	This is the total number of packets transmitted over this port.
CTR pTotalBytesTransmitted	1.3.6.1.4.1.795.3.1.2.3.3.1.10	Counter	read-only	This is the total number of bytes transmitted over this port.
CTR pTotalPacketsReceived	1.3.6.1.4.1.795.3.1.2.3.3.1.11	Counter	read-only	This is the total number of packets received over this port.
CTR pTotalBytesReceived	1.3.6.1.4.1.795.3.1.2.3.3.1.12	Counter	read-only	This is the total number of bytes received over this port.
CTR pTotalTransmitErrors	1.3.6.1.4.1.795.3.1.2.3.3.1.13	Counter	read-only	This is the total number of transmit errors seen on this port.
CTR pTotalReceiveErrors	1.3.6.1.4.1.795.3.1.2.3.3.1.14	Counter	read-only	This is the total number of receive errors seen on this port.
INT pStatus	1.3.6.1.4.1.795.3.1.2.3.3.1.15	INTEGER	read-only	The current status of the port. portActive indicates a functioning port. portDown indicates a port that is not functioning. portDisabled indicates a port that has been down for some time or has demonstrated a serious problem which should be addressed by the system administrator. portInStandby indicates a port which is designated as a backup in a failover interface.
cardInformationTable	1.3.6.1.4.1.795.3.1.2.3.4		not-accessible	A table listing Adaptec network card information.
cardInformationEntry	1.3.6.1.4.1.795.3.1.2.3.4.1		not-accessible	Each entry lists information about a single network card.
INT cCardIndex	1.3.6.1.4.1.795.3.1.2.3.4.1.1	INTEGER	read-only	A unique value assigned to each network card. This is an increasing numeric value ranging between 1 and the value of NumCards.
STR cCardDescription	1.3.6.1.4.1.795.3.1.2.3.4.1.2	DisplayString	read-only	The descriptive name assigned to the network card.
INT cPortsOnCard	1.3.6.1.4.1.795.3.1.2.3.4.1.3	INTEGER	read-only	The number of ports on the network card.
cardPortInfoTable	1.3.6.1.4.1.795.3.1.2.3.5		not-accessible	This table indicates the interface and port number associated with each port on all installed network cards.
cardPortInfoEntry	1.3.6.1.4.1.795.3.1.2.3.5.1		not-accessible	Each entry lists information for a single port on a network card.
INT cpCardIndex	1.3.6.1.4.1.795.3.1.2.3.5.1.1	INTEGER	read-only	A unique value assigned to each network card. This is an increasing numeric value ranging between 1 and the value of NumCards.
INT cpPortIndex	1.3.6.1.4.1.795.3.1.2.3.5.1.2	INTEGER	read-only	A unique value assigned to each port on a particular network card. This is an increasing numeric value ranging between 1 and the value of cPortsOnCard for the card indexed by cCardIndex.
INT cpInterfaceNumber	1.3.6.1.4.1.795.3.1.2.3.5.1.3	INTEGER	read-only	The value of pInterfaceIndex that corresponds to this port. If this port is not part of an interface it will be set to 0
INT cpPortNumber	1.3.6.1.4.1.795.3.1.2.3.5.1.4	INTEGER	read-only	The value of pPortIndex that corresponds to this port. If this port is not part of an interface it will be set to 0
INT cpTableNumber1	1.3.6.1.4.1.795.3.1.2.3.5.1.5	INTEGER	read-only	The value of Lan Adapter component table rows that correspond to this port. This provides a mapping to entries in an SNMP implementation of the Desktop Management Interface Lan Adapter Component. If this port is not in use on the system this value will be set to 0

RFC description

Adaptec vendor-private MIB for DuraLink RAID controller management, monitoring, and fault notification.

Start monitoring Adaptec DuraLink storage controllers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ADAPTECDURALINK-MIB

What Is ADAPTECDURALINK-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description