A3COM-HUAWEI-FR-QOS-MIB

All MIBs › A3COM-HUAWEI-FR-QOS-MIB

Organization: Huawei Technologies co.,Ltd.

Last Updated: 2004-07-12

Category: Frame Relay, Quality of Service, Vendor: H3C/HH3C

Description: Manages quality-of-service policies applied to Frame Relay PVCs on H3C wide-area network interfaces.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is A3COM-HUAWEI-FR-QOS-MIB?

A3COM-HUAWEI-FR-QOS-MIB manages class-based Quality of Service for Frame Relay permanent virtual circuits (PVCs) on H3C wide-area routers, letting operators classify FR traffic and apply committed information rate (CIR) policies. Per its module_desc it is built around hwFrClassCfgInfoTable (FR class definitions), hwCirCfgInfoTable (CIR/bandwidth configuration), and hwIfApplyFrClassTable (mapping FR classes to specific interfaces). It supports monitoring of the QoS software feature's configuration and running state on Frame Relay WAN links, confirming which CIR/class policy is applied to a given interface and whether that policy is active, rather than monitoring physical hardware faults directly. Dependency: it is layered on top of the standard Frame Relay MIB interface-indexing model since classes are applied per Frame Relay interface. Deployment is on enterprise WAN routers using legacy Frame Relay circuits requiring differentiated QoS treatment for voice/data traffic classes, verified through A3COM-HUAWEI-FR-QOS-MIB SNMP monitoring of the applied CIR policies.

IPNetwork Monitor allows you to monitor SNMP objects defined in A3COM-HUAWEI-FR-QOS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C/3Com WAN routers with Frame Relay interfaces

Monitoring Examples

An admin would walk hwFrClassCfgInfoTable to enumerate defined FR traffic classes, then check hwCirCfgInfoTable to confirm the committed information rate configured for a given class matches the contracted CIR from the carrier. Cross-referencing hwIfApplyFrClassTable would show which class is applied to a specific Frame Relay sub-interface, and a mismatch there, such as voice traffic mapped to a best-effort class, would explain reports of poor call quality over that PVC.

What Can Be Monitored

defined FR traffic class configuration
committed information rate (CIR) per class
FR class-to-interface mapping

Imported Objects

From A3COM-HUAWEI-OID-MIB

hwQoS

OBJECT-IDENTITY

From RFC1213-MIB

ifIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwFrQoSMib	1.3.6.1.4.1.43.45.1.5.25.32.3			This MIB contains objects to Manage configuration and Monitor running state for Class Based FR QoS feature. ******************************* MIB Tables ******************************** This MIB consists of the following tables: 1 : hwFrClassCfgInfoTable 2 : hwCirCfgInfoTable 3 : hwIfApplyFrClassTable 4 : hwPvcApplyFrClassTable 5 : hwFrPvcBandwidthTable 5 : hwRTPFrClassApplyTable 6 : hwRTPFrPvcQueueRunInfoTable
hwFrQoSObjects	1.3.6.1.4.1.43.45.1.5.25.32.3.1
hwFrClassObjects	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1
I32 hwFrClassIndexNext	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.1	Integer32	read-only	This object contains an appropriate value to be used for hwFrClassIndex when creating rows in the hwFrClassCfgInfoTable. Begin with 0.
hwFrClassCfgInfoTable	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.2		not-accessible	A table of Fr Class configuration information.
hwFrClassCfgInfoEntry	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.2.1		not-accessible	Fr Class Configuration Information Entry.
I32 hwFrClassIndex	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.2.1.1	Integer32	not-accessible	Index of Fr Class. Begin with 0.
OCT hwFrClassName	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.2.1.2	OCTET STRING	read-create	Name of Fr Class.
ROW hwFrClassRowStatus	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.2.1.3	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy
hwCirAllowCfgInfoTable	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.3		not-accessible	A table of DCE allowed rate Configuration information.
hwCirAllowCfgInfoEntry	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.3.1		not-accessible	DCE allowed ratee Configuration Information Entry.
I32 hwCirAllowFrClassIndex	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.3.1.1	Integer32	not-accessible	Index of Fr Class. Begin with 0.Equal to hwFrClassIndex
CIR hwCirAllowDirection	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.3.1.2	CirAllowDirection	not-accessible	Packet Direction. inbound (1) outbound (2) inbound and outbound (3)
I32 hwCirAllowValue	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.3.1.3	Integer32	read-create	DCE allowed rate (value greater than CIR) Unit : Bits per second. Value : .
ROW hwCirAllowRowStatus	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.3.1.4	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy
hwCirCfgInfoTable	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.4		not-accessible	A table of Committed Information Rate Configuration information.
hwCirCfgInfoEntry	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.4.1		not-accessible	Committed Information Rate Configuration Information Entry.
I32 hwCirFrClassIndex	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.4.1.1	Integer32	not-accessible	Index of Fr Class. Begin with 0.Equal to hwFrClassIndex
I32 hwCirValue	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.4.1.2	Integer32	read-create	CIR in packet output direction ,bps. Value : .
ROW hwCirRowStatus	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.4.1.3	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy
hwIfApplyFrClassTable	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.5		not-accessible	A table of QoS Fr Class instance.
hwIfApplyFrClassEntry	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.5.1		not-accessible	FrClass applied on interface Configuration Information Entry.
I32 hwIfApplyFrClassIfIndex	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.5.1.1	Integer32	not-accessible	Interface Index, equal to ifIndex.
I32 hwIfApplyFrClassIndex	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.5.1.2	Integer32	read-create	Index of Fr Class, equal to hwFrClassIndex
ROW hwIfApplyFrClassRowStatus	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.5.1.3	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy
hwPvcApplyFrClassTable	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.6		not-accessible	A table of QoS Fr Class instance.
hwPvcApplyFrClassEntry	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.6.1		not-accessible	Fr Class applied on FR Pvc Configuration Information Entry.
I32 hwPvcApplyFrClassIfIndex	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.6.1.1	Integer32	not-accessible	Fr Interface Index, equal to ifIndex.
I32 hwPvcApplyFrClassDlciNum	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.6.1.2	Integer32	not-accessible	Fr DLCI number.
I32 hwPvcApplyFrClassIndex	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.6.1.3	Integer32	read-create	Index of Fr Class, equal to hwFrClassIndex
ROW hwPvcApplyFrClassRowStatus	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.6.1.4	RowStatus	read-create	RowStatus. Three actions are used: active, createAndGo, destroy
hwFrPvcBandwidthTable	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.7		not-accessible	A table of Running statistics for bandwidth.
hwFrPvcBandwidthEntry	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.7.1		not-accessible	Bandwidth Running statistics
I32 hwFrPvcBandwidthMaxReservedBW	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.7.1.1	Integer32	read-only	Max reserved bandWidth. Unit : Kbps
I32 hwFrPvcBandwidthAvailable	1.3.6.1.4.1.43.45.1.5.25.32.3.1.1.7.1.2	Integer32	read-only	Available bandWidth. Unit : Kbps
hwRTPQoSObjects	1.3.6.1.4.1.43.45.1.5.25.32.3.1.2
hwRTPFrClassApplyTable	1.3.6.1.4.1.43.45.1.5.25.32.3.1.2.1		not-accessible	A table of RTP(Realtime Transport Protocol) Queue instance.
hwRTPFrClassApplyEntry	1.3.6.1.4.1.43.45.1.5.25.32.3.1.2.1.1		not-accessible	RTP(Realtime Transport Protocol) Queue Configuration Information Entry.
I32 hwRTPFrClassApplyFrClassIndex	1.3.6.1.4.1.43.45.1.5.25.32.3.1.2.1.1.1	Integer32	not-accessible	Fr Class Index, equal to HwFrClassIndex.
I32 hwRTPFrClassApplyStartPort	1.3.6.1.4.1.43.45.1.5.25.32.3.1.2.1.1.2	Integer32	read-create	RTP-PORT(3): start-port: 2000~65535
I32 hwRTPFrClassApplyEndPort	1.3.6.1.4.1.43.45.1.5.25.32.3.1.2.1.1.3	Integer32	read-create	RTP-PORT(3): end-port: 2000~65535
I32 hwRTPFrClassApplyBandWidth	1.3.6.1.4.1.43.45.1.5.25.32.3.1.2.1.1.4	Integer32	read-create	Max bandWidth Value: Absolute value: 8~1000000. Unit: Kbps
I32 hwRTPFrClassApplyCbs	1.3.6.1.4.1.43.45.1.5.25.32.3.1.2.1.1.5	Integer32	read-create	Committed Burst Size: 1500~2000000. Unit: byte
ROW hwRTPFrClassApplyRowStatus	1.3.6.1.4.1.43.45.1.5.25.32.3.1.2.1.1.6	RowStatus	read-create	RowStatus for RTPFrClassApply Table. Three actions are used: active, createAndGo, destroy
hwRTPFrPvcQueueRunInfoTable	1.3.6.1.4.1.43.45.1.5.25.32.3.1.2.2		not-accessible	A table of Running statistics for RTP(Realtime Transport Protocol) Queue applied on the FR PVC
hwRTPFrPvcQueueRunInfoEntry	1.3.6.1.4.1.43.45.1.5.25.32.3.1.2.2.1		not-accessible	RTP(Realtime Transport Protocol) Queue statistics entry.
I32 hwRTPFrPvcQueueSize	1.3.6.1.4.1.43.45.1.5.25.32.3.1.2.2.1.1	Integer32	read-only	the packet number of RTP(Realtime Transport Protocol) Queue now.
I32 hwRTPFrPvcQueueMaxSize	1.3.6.1.4.1.43.45.1.5.25.32.3.1.2.2.1.2	Integer32	read-only	the Max packet number of RTP(Realtime Transport Protocol) Queue.
C32 hwRTPFrPvcQueueOutputs	1.3.6.1.4.1.43.45.1.5.25.32.3.1.2.2.1.3	Counter32	read-only	the Output packet number of RTP(Realtime Transport Protocol) Queue.
C32 hwRTPFrPvcQueueDiscards	1.3.6.1.4.1.43.45.1.5.25.32.3.1.2.2.1.4	Counter32	read-only	the Discarded packet number of RTP(Realtime Transport Protocol) Queue.

RFC description

3Com/Huawei MIB for managing Frame Relay Quality of Service (QoS) configuration and parameters on 3Com-Huawei network devices.

Start monitoring H3C/3Com WAN routers (Frame Relay) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download A3COM-HUAWEI-FR-QOS-MIB

What Is A3COM-HUAWEI-FR-QOS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description