A3COM-HUAWEI-IFQOS2-MIB

All MIBs › A3COM-HUAWEI-IFQOS2-MIB

Organization: H3C Technologies Co.,Ltd.

Last Updated: 2008-12-02

Category: Quality of Service, Vendor: H3C/HH3C

Description: Manages per-interface quality-of-service queue configuration and traffic statistics (version 2) on H3C devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is A3COM-HUAWEI-IFQOS2-MIB?

A3COM-HUAWEI-IFQOS2-MIB is version 2 of H3C/3Com's private interface quality-of-service MIB, providing per-interface QoS queue configuration and associated traffic statistics such as queuing, scheduling, and congestion-management settings. Although no sample objects were available for this module, its module description indicates it exposes both configuration data (queue/policy assignment per interface) and operational counters (per-queue traffic and drop statistics). Its monitoring role is primarily software/service-level: it lets an operator confirm that QoS policies are correctly applied per interface and detect queues that are dropping traffic or exceeding expected utilization, which points to congestion or misconfiguration. It depends conceptually on the vendor's interface indexing scheme (aligned with the standard IF-MIB ifIndex) to map QoS objects to physical or logical interfaces. It is used in H3C/3Com switches and routers where differentiated QoS treatment is applied to interface traffic. Engineers can download the A3COM-HUAWEI-IFQOS2-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in A3COM-HUAWEI-IFQOS2-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C/3Com switches and routers

Monitoring Examples

No sample objects were provided for this module, so specific table/object names cannot be grounded; in general this type of MIB would be polled per-interface (indexed by ifIndex) to compare configured queue/policy assignment against observed per-queue byte and drop counters, revealing an interface whose priority queue is dropping traffic under load.

What Can Be Monitored

per-interface QoS queue configuration
per-queue traffic counters
per-queue drop counters
QoS policy-to-interface mapping

Imported Objects

From A3COM-HUAWEI-OID-MIB

h3cCommon

OBJECT-IDENTITY

From RFC1213-MIB

ifIndex

From SNMPv2-SMI

Counter64
Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using h3cIfQoSPassPackets OID:

Select an H3C/3Com switch or router as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type h3cIfQoSPassPackets into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of forwarded packets. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
h3cIfQoCarListGroup	1.3.6.1.4.1.43.45.1.10.2.65.1.2.8.1
h3cIfQos2	1.3.6.1.4.1.43.45.1.10.2.65.1			Interface QoS management information base.
I32 h3cIfQoSAggregativeCarApplyCarIndex	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.3.1.4	Integer32	read-create	The index of aggregative car.
DIR h3cIfQoSAggregativeCarApplyDirection	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.3.1.1	Direction	not-accessible	Direction.
h3cIfQoSAggregativeCarApplyEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.3.1		not-accessible	Aggregative car instance information.
ROW h3cIfQoSAggregativeCarApplyRowStatus	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.3.1.5	RowStatus	read-create	RowStatus.
INT h3cIfQoSAggregativeCarApplyRuleType	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.3.1.2	INTEGER	not-accessible	The type of class rule.
I32 h3cIfQoSAggregativeCarApplyRuleValue	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.3.1.3	Integer32	not-accessible	The number of class rule. ipv4acl : 2000..5999 ipv6acl : 2000..42767 carl : 1..16 other types: 0.
h3cIfQoSAggregativeCarApplyTable	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.3		not-accessible	A table of aggregative car instance.
U32 h3cIfQoSAggregativeCarCbs	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.4	Unsigned32	read-create	Committed-burst-size. Unit : byte
U32 h3cIfQoSAggregativeCarCir	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.3	Unsigned32	read-create	Committed-information-rate. Unit : kbps
h3cIfQoSAggregativeCarConfigEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1		not-accessible	Aggregative car information.
h3cIfQoSAggregativeCarConfigTable	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2		not-accessible	A table of aggregative car information.
U32 h3cIfQoSAggregativeCarEbs	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.5	Unsigned32	read-create	Excess-burst-size. Unit : byte
CAR h3cIfQoSAggregativeCarGreenActionType	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.7	CarAction	read-create	Supported green action: invalid(0), pass(1), discard(3), remark(4), remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10), Hardware QoS : pass, discard, remark. Software QoS : pass, discard, remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10). 'invalid' is returned only when getting value from software QoS.
I32 h3cIfQoSAggregativeCarGreenActionValue	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.8	Integer32	read-create	The value is to remark When green action is remarking. For remark-dscp-pass, the range is 0~63; For remark-ip-pass and remark-mplsexp-pass, the range is 0~7; Only software QoS support this node. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set.
C64 h3cIfQoSAggregativeCarGreenBytes	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.4.1.2	Counter64	read-only	Number of bytes conforming CIR
C64 h3cIfQoSAggregativeCarGreenPackets	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.4.1.1	Counter64	read-only	Number of packets conforming CIR.
h3cIfQoSAggregativeCarGroup	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1
I32 h3cIfQoSAggregativeCarIndex	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.1	Integer32	not-accessible	The index of aggregative car.
OCT h3cIfQoSAggregativeCarName	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.2	OCTET STRING	read-create	The name of aggregative car.
I32 h3cIfQoSAggregativeCarNextIndex	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.1	Integer32	read-only	This object contains an appropriate value to be used for h3cIfQoSAggregativeCarIndex when creating rows in the h3cIfQoSAggregativeCarConfigTable. Begin with 1.
U32 h3cIfQoSAggregativeCarPir	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.6	Unsigned32	read-create	Peak-information-rate. Unit : kbps
CAR h3cIfQoSAggregativeCarRedActionType	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.11	CarAction	read-create	Supported red action: invalid(0), pass(1), discard(3), remark(4), remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10), Hardware QoS : pass, discard, remark. Software QoS : pass, discard, remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10). 'invalid' is returned only when getting value from software QoS.
I32 h3cIfQoSAggregativeCarRedActionValue	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.12	Integer32	read-create	The value is to remark When red action is remarking. For remark-dscp-pass, the range is 0~63; For remark-ip-pass and remark-mplsexp-pass, the range is 0~7; Only software QoS support this node. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set.
C64 h3cIfQoSAggregativeCarRedBytes	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.4.1.6	Counter64	read-only	Number of bytes exceeding CIR.
C64 h3cIfQoSAggregativeCarRedPackets	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.4.1.5	Counter64	read-only	Number of packets exceeding CIR.
ROW h3cIfQoSAggregativeCarRowStatus	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.14	RowStatus	read-create	RowStatus.
h3cIfQoSAggregativeCarRunInfoEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.4.1		not-accessible	Aggregative car statistic information.
h3cIfQoSAggregativeCarRunInfoTable	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.4		not-accessible	A table of aggregative car statistic information.
INT h3cIfQoSAggregativeCarType	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.13	INTEGER	read-create	The type of aggregative CAR. The enumeration 'aggregative' indicates that the ports with a same aggregative CAR use one token bulk. The enumeration 'notAggregative' indicates that each port uses one token bulk.
CAR h3cIfQoSAggregativeCarYellowActionType	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.9	CarAction	read-create	Supported yellow action: invalid(0), pass(1), discard(3), remark(4), remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10), Hardware QoS : pass, discard, remark. Software QoS : pass, discard, remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10). 'invalid' is returned only when getting value from software QoS.
I32 h3cIfQoSAggregativeCarYellowActionValue	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.2.1.10	Integer32	read-create	The value is to remark When yellow action is remarking. For remark-dscp-pass, the range is 0~63; For remark-ip-pass and remark-mplsexp-pass, the range is 0~7; Only software QoS support this node. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set.
C64 h3cIfQoSAggregativeCarYellowBytes	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.4.1.4	Counter64	read-only	Number of yellow bytes.
C64 h3cIfQoSAggregativeCarYellowPackets	1.3.6.1.4.1.43.45.1.10.2.65.1.4.1.4.1.3	Counter64	read-only	Number of yellow packets.
h3cIfQoSBandwidthEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.2.5.1.1		not-accessible	Bandwidth information entry.
h3cIfQoSBandwidthGroup	1.3.6.1.4.1.43.45.1.10.2.65.1.2.5
ROW h3cIfQoSBandwidthRowStatus	1.3.6.1.4.1.43.45.1.10.2.65.1.2.5.1.1.3	RowStatus	read-create	RowStatus.
h3cIfQoSBandwidthTable	1.3.6.1.4.1.43.45.1.10.2.65.1.2.5.1		not-accessible	A table of bandwidth of interface information.
I32 h3cIfQoSBindingIf	1.3.6.1.4.1.43.45.1.10.2.65.1.10.1.1.1.1	Integer32	read-create	The binding interface.
ROW h3cIfQoSBindingRowStatus	1.3.6.1.4.1.43.45.1.10.2.65.1.10.1.1.1.2	RowStatus	read-create	RowStatus
h3cIfQoSCarlEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.2.8.1.1.1		not-accessible	CARL configuration infomation.
h3cIfQoSCarListObject	1.3.6.1.4.1.43.45.1.10.2.65.1.2.8
I32 h3cIfQoSCarlListNum	1.3.6.1.4.1.43.45.1.10.2.65.1.2.8.1.1.1.1	Integer32	not-accessible	The index of the table, which is the CARL number.
INT h3cIfQoSCarlParaType	1.3.6.1.4.1.43.45.1.10.2.65.1.2.8.1.1.1.2	INTEGER	read-create	Parameter type of the CARL number.
OCT h3cIfQoSCarlParaValue	1.3.6.1.4.1.43.45.1.10.2.65.1.2.8.1.1.1.3	OCTET STRING	read-create	Parameter value of the CARL table.
ROW h3cIfQoSCarlRowStatus	1.3.6.1.4.1.43.45.1.10.2.65.1.2.8.1.1.1.4	RowStatus	read-create	RowStatus.
h3cIfQoSCarlTable	1.3.6.1.4.1.43.45.1.10.2.65.1.2.8.1.1		not-accessible	Committed Access Rate List(CARL) table.
h3cIfQoSCARObjects	1.3.6.1.4.1.43.45.1.10.2.65.1.4
h3cIfQoSCQApplyEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.4.1		not-accessible	Custom queue instance information.
I32 h3cIfQoSCQApplyListNumber	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.4.1.1	Integer32	read-create	Custom queue list number.
ROW h3cIfQoSCQApplyRowStatus	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.4.1.2	RowStatus	read-create	RowStatus.
h3cIfQoSCQApplyTable	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.4		not-accessible	A table of custom queue instance.
ROW h3cIfQoSCQClassRowStatus	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.3.1.4	RowStatus	read-create	RowStatus.
h3cIfQoSCQClassRuleEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.3.1		not-accessible	A table of class rule of custom queue information.
I32 h3cIfQoSCQClassRuleQueueID	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.3.1.3	Integer32	read-create	Specify the queue for matched packets.
h3cIfQoSCQClassRuleTable	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.3		not-accessible	A table of class rule of custom queue information.
INT h3cIfQoSCQClassRuleType	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.3.1.1	INTEGER	not-accessible	Type of class rule. 'ipall' means all ip packets.
I32 h3cIfQoSCQClassRuleValue	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.3.1.2	Integer32	not-accessible	Value of class rule. interface : ifIndex ipv4acl : 2000..3999 ipv6acl : 2000..42767 greater-than : 0..65535 less-than : 0..65535 tcp : 0..65535 udp : 0..65535 mpls(exp-mask) : 1..255 other types: 0.
h3cIfQoSCQConfigGroup	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1
h3cIfQoSCQDefaultEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.1.1		not-accessible	Custom queue default configuration information entry.
I32 h3cIfQoSCQDefaultQueueID	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.1.1.2	Integer32	read-write	Default queue ID.
h3cIfQoSCQDefaultTable	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.1		not-accessible	A table of custom queue default configuration information.
I32 h3cIfQoSCQListNumber	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.1.1.1	Integer32	not-accessible	Custom queue list number.
h3cIfQoSCQObject	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3
I32 h3cIfQoSCQQueueID	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.2.1.1	Integer32	not-accessible	Custom queue index.
I32 h3cIfQoSCQQueueLength	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.2.1.2	Integer32	read-write	The size of custom queue.
h3cIfQoSCQQueueLengthEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.2.1		not-accessible	Queue length of custom queue configuration information entry.
h3cIfQoSCQQueueLengthTable	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.2		not-accessible	A table of queue length of custom queue configuration information.
I32 h3cIfQoSCQQueueServing	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.1.2.1.3	Integer32	read-write	The maximum bytes that the specified queue can transmit in each turn.
C64 h3cIfQoSCQRunInfoDiscardPackets	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.2.1.1.3	Counter64	read-only	The packet number of custom queue discard.
h3cIfQoSCQRunInfoEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.2.1.1		not-accessible	Custom queue statistic information entry.
h3cIfQoSCQRunInfoGroup	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.2
I32 h3cIfQoSCQRunInfoLength	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.2.1.1.2	Integer32	read-only	The maximum length of custom queue.
I32 h3cIfQoSCQRunInfoSize	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.2.1.1.1	Integer32	read-only	The number of packets in the custom queue.
h3cIfQoSCQRunInfoTable	1.3.6.1.4.1.43.45.1.10.2.65.1.2.3.2.1		not-accessible	A table of custom queue statistic information.
U32 h3cIfQoSCurQueueBPS	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.12	Unsigned32	read-only	The BPS of packets in the current queue.
U32 h3cIfQoSCurQueueBytes	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.10	Unsigned32	read-only	The bytes of packets in the current queue.
U32 h3cIfQoSCurQueuePkts	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.9	Unsigned32	read-only	The number of packets in the current queue.
U32 h3cIfQoSCurQueuePPS	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.11	Unsigned32	read-only	The PPS of packets in the current queue.
C64 h3cIfQoSDropBytes	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.6	Counter64	read-only	The bytes of dropped packets.
C64 h3cIfQoSDropPackets	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.2	Counter64	read-only	The number of dropped packets.
h3cIfQoSFIFOConfigEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.2.1.1.1		not-accessible	FIFO queue information entry.
h3cIfQoSFIFOConfigTable	1.3.6.1.4.1.43.45.1.10.2.65.1.2.1.1		not-accessible	A table of FIFO queue information.
C64 h3cIfQoSFIFODiscardPackets	1.3.6.1.4.1.43.45.1.10.2.65.1.2.1.2.1.2	Counter64	read-only	The number of discard packet.
I32 h3cIfQoSFIFOMaxQueueLen	1.3.6.1.4.1.43.45.1.10.2.65.1.2.1.1.1.1	Integer32	read-write	The maximum length of FIFO queue.
h3cIfQoSFIFOObject	1.3.6.1.4.1.43.45.1.10.2.65.1.2.1
h3cIfQoSFIFORunInfoEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.2.1.2.1		not-accessible	FIFO queue statistic information entry.
h3cIfQoSFIFORunInfoTable	1.3.6.1.4.1.43.45.1.10.2.65.1.2.1.2		not-accessible	A table of FIFO queue statistic information.
I32 h3cIfQoSFIFOSize	1.3.6.1.4.1.43.45.1.10.2.65.1.2.1.2.1.1	Integer32	read-only	The number of packet in FIFO queue.
U32 h3cIfQoSGTSCbs	1.3.6.1.4.1.43.45.1.10.2.65.1.5.1.1.4	Unsigned32	read-create	Committed Burst Size. Unit: byte.
U32 h3cIfQoSGTSCir	1.3.6.1.4.1.43.45.1.10.2.65.1.5.1.1.3	Unsigned32	read-create	Committed Information Rate. Unit: kbps.
INT h3cIfQoSGTSClassRuleType	1.3.6.1.4.1.43.45.1.10.2.65.1.5.1.1.1	INTEGER	not-accessible	The index of the table, which is the matching type for the packets on interface: ipv4acl, ipv6acl, any, queue.
I32 h3cIfQoSGTSClassRuleValue	1.3.6.1.4.1.43.45.1.10.2.65.1.5.1.1.2	Integer32	not-accessible	Value of type. ipv4acl : 2000..4999 ipv6acl : 2000..42767 any : 0 queue : 0..7
h3cIfQoSGTSConfigEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.5.1.1		not-accessible	Generic traffic shaping information entry.
ROW h3cIfQoSGTSConfigRowStatus	1.3.6.1.4.1.43.45.1.10.2.65.1.5.1.1.7	RowStatus	read-create	RowStatus.
h3cIfQoSGTSConfigTable	1.3.6.1.4.1.43.45.1.10.2.65.1.5.1		not-accessible	A table of generic traffic shaping information.
C64 h3cIfQoSGTSDelayedBytes	1.3.6.1.4.1.43.45.1.10.2.65.1.5.2.1.7	Counter64	read-only	The number of delayed bytes.
C64 h3cIfQoSGTSDelayedPackets	1.3.6.1.4.1.43.45.1.10.2.65.1.5.2.1.6	Counter64	read-only	The number of delayed packets.
C64 h3cIfQoSGTSDiscardBytes	1.3.6.1.4.1.43.45.1.10.2.65.1.5.2.1.5	Counter64	read-only	The number of discard bytes.
C64 h3cIfQoSGTSDiscardPackets	1.3.6.1.4.1.43.45.1.10.2.65.1.5.2.1.4	Counter64	read-only	The number of discard packets.
U32 h3cIfQoSGTSEbs	1.3.6.1.4.1.43.45.1.10.2.65.1.5.1.1.5	Unsigned32	read-create	Excess Burst Size. Unit: byte.
h3cIfQoSGTSObjects	1.3.6.1.4.1.43.45.1.10.2.65.1.5
C64 h3cIfQoSGTSPassedBytes	1.3.6.1.4.1.43.45.1.10.2.65.1.5.2.1.3	Counter64	read-only	The number of passed bytes.
C64 h3cIfQoSGTSPassedPackets	1.3.6.1.4.1.43.45.1.10.2.65.1.5.2.1.2	Counter64	read-only	The number of passed packets.
I32 h3cIfQoSGTSQueueLength	1.3.6.1.4.1.43.45.1.10.2.65.1.5.1.1.6	Integer32	read-create	The length of queue.
I32 h3cIfQoSGTSQueueSize	1.3.6.1.4.1.43.45.1.10.2.65.1.5.2.1.1	Integer32	read-only	The number of packets in the queue.
h3cIfQoSGTSRunInfoEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.5.2.1		not-accessible	Generic traffic shaping's statistic information entry.
h3cIfQoSGTSRunInfoTable	1.3.6.1.4.1.43.45.1.10.2.65.1.5.2		not-accessible	A table of generic traffic shaping's statistic information.
h3cIfQoSHardwareQueueConfigGroup	1.3.6.1.4.1.43.45.1.10.2.65.1.1.1
h3cIfQoSHardwareQueueObjects	1.3.6.1.4.1.43.45.1.10.2.65.1.1
h3cIfQoSHardwareQueueRunInfoEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1		not-accessible	Queue statistic information entry.
h3cIfQoSHardwareQueueRunInfoGroup	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2
h3cIfQoSHardwareQueueRunInfoTable	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1		not-accessible	A table of queue statistic information.
h3cIfQoSHQueueTcpRunInfoEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1		not-accessible	Queue statistic information entry about TCP and non-TCP packets.
h3cIfQoSHQueueTcpRunInfoTable	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2		not-accessible	A table of queue statistic information about TCP and non-TCP packets.
h3cIfQoSL3PlusObjects	1.3.6.1.4.1.43.45.1.10.2.65.1.10
h3cIfQoSLineRateObjects	1.3.6.1.4.1.43.45.1.10.2.65.1.3
U32 h3cIfQoSLRCbs	1.3.6.1.4.1.43.45.1.10.2.65.1.3.1.1.3	Unsigned32	read-create	Committed Burst Size. Unit: byte
U32 h3cIfQoSLRCir	1.3.6.1.4.1.43.45.1.10.2.65.1.3.1.1.2	Unsigned32	read-create	Committed Information Rate. Unit: kbps.
h3cIfQoSLRConfigEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.3.1.1		not-accessible	Line rate configuration information entry.
h3cIfQoSLRConfigTable	1.3.6.1.4.1.43.45.1.10.2.65.1.3.1		not-accessible	A table of line rate configuration information.
DIR h3cIfQoSLRDirection	1.3.6.1.4.1.43.45.1.10.2.65.1.3.1.1.1	Direction	not-accessible	Line rate on the inbound or outbound of data stream.
U32 h3cIfQoSLREbs	1.3.6.1.4.1.43.45.1.10.2.65.1.3.1.1.4	Unsigned32	read-create	Excess Burst Size. Unit: byte.
U32 h3cIfQoSLRPir	1.3.6.1.4.1.43.45.1.10.2.65.1.3.1.1.6	Unsigned32	read-create	Peak Information Rate. Unit: kbps.
INT h3cIfQoSLRRunInfoActiveShaping	1.3.6.1.4.1.43.45.1.10.2.65.1.3.2.1.5	INTEGER	read-only	The flag of shaping.
C64 h3cIfQoSLRRunInfoDelayedBytes	1.3.6.1.4.1.43.45.1.10.2.65.1.3.2.1.4	Counter64	read-only	The number of delayed bytes.
C64 h3cIfQoSLRRunInfoDelayedPackets	1.3.6.1.4.1.43.45.1.10.2.65.1.3.2.1.3	Counter64	read-only	The number of delayed packets.
h3cIfQoSLRRunInfoEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.3.2.1		not-accessible	Line rate run info information entry.
C64 h3cIfQoSLRRunInfoPassedBytes	1.3.6.1.4.1.43.45.1.10.2.65.1.3.2.1.2	Counter64	read-only	The number of passed bytes.
C64 h3cIfQoSLRRunInfoPassedPackets	1.3.6.1.4.1.43.45.1.10.2.65.1.3.2.1.1	Counter64	read-only	The number of passed packets.
h3cIfQoSLRRunInfoTable	1.3.6.1.4.1.43.45.1.10.2.65.1.3.2		not-accessible	A table of line rate run info information.
h3cIfQoSMapObjects	1.3.6.1.4.1.43.45.1.10.2.65.1.9
I32 h3cIfQoSMaxBandwidth	1.3.6.1.4.1.43.45.1.10.2.65.1.2.5.1.1.1	Integer32	read-create	The maximum bandwidth of interface. Unit : Kbps
U32 h3cIfQoSPassBPS	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.5	Unsigned32	read-only	The BPS of forwarded packets. BPS: bytes per second.
C64 h3cIfQoSPassBytes	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.3	Counter64	read-only	The bytes of forwarded packets.
C64 h3cIfQoSPassPacketsEx	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.1	Counter64	read-only	The number of forwarded packets.
U32 h3cIfQoSPassPPS	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.4	Unsigned32	read-only	The PPS of forwarded packets. PPS: packets per second.
h3cIfQoSPortBindingEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.10.1.1.1		not-accessible	Binding information entry.
h3cIfQoSPortBindingGroup	1.3.6.1.4.1.43.45.1.10.2.65.1.10.1
h3cIfQoSPortBindingTable	1.3.6.1.4.1.43.45.1.10.2.65.1.10.1.1		not-accessible	A table of EACL sub-interface binding information for L3+ board .
h3cIfQoSPortPirorityTrustEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.7.1.2.1		not-accessible	Trust-priority of port information entry.
h3cIfQoSPortPirorityTrustTable	1.3.6.1.4.1.43.45.1.10.2.65.1.7.1.2		not-accessible	A table of the trust-priority of port information.
h3cIfQoSPortPriorityConfigGroup	1.3.6.1.4.1.43.45.1.10.2.65.1.7.1
h3cIfQoSPortPriorityEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.7.1.1.1		not-accessible	The priority of port information entry.
h3cIfQoSPortPriorityObjects	1.3.6.1.4.1.43.45.1.10.2.65.1.7
h3cIfQoSPortPriorityTable	1.3.6.1.4.1.43.45.1.10.2.65.1.7.1.1		not-accessible	A table of priority of port information.
INT h3cIfQoSPortPriorityTrustOvercastType	1.3.6.1.4.1.43.45.1.10.2.65.1.7.1.2.1.2	INTEGER	read-write	The overcast type.
INT h3cIfQoSPortPriorityTrustTrustType	1.3.6.1.4.1.43.45.1.10.2.65.1.7.1.2.1.1	INTEGER	read-write	The trust type of port.
I32 h3cIfQoSPortPriorityValue	1.3.6.1.4.1.43.45.1.10.2.65.1.7.1.1.1.1	Integer32	read-write	The priority of port.
T/F h3cIfQoSPortWredEnable	1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.1.1.1	TruthValue	read-create	The object is used to enable or disable WRED function of the port. true: Enable WRED function of a port. false: Disable WRED function of a port.
h3cIfQoSPortWredGroup	1.3.6.1.4.1.43.45.1.10.2.65.1.6.2
h3cIfQoSPortWredPreConfigEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.2.1		not-accessible	Weighted random early detect precedence configuration information entry.
h3cIfQoSPortWredPreConfigTable	1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.2		not-accessible	A table of weighted random early detect precedence configuration information.
I32 h3cIfQoSPortWredPreDiscardProbability	1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.2.1.4	Integer32	read-create	Discard probability denominator
I32 h3cIfQoSPortWredPreHighLimit	1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.2.1.3	Integer32	read-create	High limit(number of packets)
I32 h3cIfQoSPortWredPreID	1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.2.1.1	Integer32	not-accessible	IP precedence, from 0 to 7.
I32 h3cIfQoSPortWredPreLowLimit	1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.2.1.2	Integer32	read-create	Low Limit(number of packets)
ROW h3cIfQoSPortWredPreRowStatus	1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.2.1.5	RowStatus	read-create	RowStatus.
h3cIfQoSPortWredRunInfoEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.3.1		not-accessible	WRED statistic information entry.
h3cIfQoSPortWredRunInfoTable	1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.3		not-accessible	A table of WRED statistic information.
I32 h3cIfQoSPortWredWeightConstant	1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.1.1.2	Integer32	read-create	Weight constant.
h3cIfQoSPortWredWeightConstantEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.1.1		not-accessible	Port WRED configuration information entry.
ROW h3cIfQoSPortWredWeightConstantRowStatus	1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.1.1.3	RowStatus	read-create	RowStatus.
h3cIfQoSPortWredWeightConstantTable	1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.1		not-accessible	A table of port WRED configuration information.
h3cIfQoSPQApplyEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.4.1		not-accessible	Priority queue instance information.
I32 h3cIfQoSPQApplyListNumber	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.4.1.1	Integer32	read-create	Priority queue list number.
ROW h3cIfQoSPQApplyRowStatus	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.4.1.2	RowStatus	read-create	RowStatus.
h3cIfQoSPQApplyTable	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.4		not-accessible	A table of priority queue instance.
ROW h3cIfQoSPQClassRowStatus	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.3.1.4	RowStatus	read-create	RowStatus.
h3cIfQoSPQClassRuleEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.3.1		not-accessible	A table of class rule of priority queue information.
PRI h3cIfQoSPQClassRuleQueueType	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.3.1.3	PriorityQueue	read-create	Specify the queue for matched packets.
h3cIfQoSPQClassRuleTable	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.3		not-accessible	A table of class rule of priority queue information.
INT h3cIfQoSPQClassRuleType	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.3.1.1	INTEGER	not-accessible	Type of class rule. 'ipall' means all ip packets.
I32 h3cIfQoSPQClassRuleValue	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.3.1.2	Integer32	not-accessible	Value of class rule. interface : ifIndex ipv4acl : 2000..3999 ipv6acl : 2000..3999, 10000..42767 greater-than : 0..65535 less-than : 0..65535 tcp : 0..65535 udp : 0..65535 mpls(exp-mask) : 1..255 other types: 0
h3cIfQoSPQConfigGroup	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1
h3cIfQoSPQDefaultEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.1.1		not-accessible	Priority queue default configuration information entry.
PRI h3cIfQoSPQDefaultQueueType	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.1.1.2	PriorityQueue	read-write	Specify priority queue that packets put into by default.
h3cIfQoSPQDefaultTable	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.1		not-accessible	A table of priority queue default configuration information.
C64 h3cIfQoSPQDiscardPackets	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.2.1.1.4	Counter64	read-only	The packet number of priority queue discard.
I32 h3cIfQoSPQLength	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.2.1.1.3	Integer32	read-only	The maximum length of priority queue.
I32 h3cIfQoSPQListNumber	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.1.1.1	Integer32	not-accessible	Priority queue list number.
h3cIfQoSPQObject	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2
h3cIfQoSPQQueueLengthEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.2.1		not-accessible	Queue length of priority queue configuration information entry.
h3cIfQoSPQQueueLengthTable	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.2		not-accessible	A table of queue length of priority queue configuration information.
PRI h3cIfQoSPQQueueLengthType	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.2.1.1	PriorityQueue	not-accessible	Type of priority queue.
I32 h3cIfQoSPQQueueLengthValue	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.1.2.1.2	Integer32	read-write	The size of priority queue.
h3cIfQoSPQRunInfoEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.2.1.1		not-accessible	Priority queue statistic information entry.
h3cIfQoSPQRunInfoGroup	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.2
h3cIfQoSPQRunInfoTable	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.2.1		not-accessible	A table of priority queue statistic information.
I32 h3cIfQoSPQSize	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.2.1.1.2	Integer32	read-only	The number of packets in the priority queue.
PRI h3cIfQoSPQType	1.3.6.1.4.1.43.45.1.10.2.65.1.2.2.2.1.1.1	PriorityQueue	not-accessible	The type of priority queue.
h3cIfQoSPriMapConfigGroup	1.3.6.1.4.1.43.45.1.10.2.65.1.9.1
h3cIfQoSPriMapContentEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.9.1.3.1		not-accessible	Priority map configuration information entry.
ROW h3cIfQoSPriMapContentRowStatus	1.3.6.1.4.1.43.45.1.10.2.65.1.9.1.3.1.3	RowStatus	read-create	RowStatus.
h3cIfQoSPriMapContentTable	1.3.6.1.4.1.43.45.1.10.2.65.1.9.1.3		not-accessible	A table of priority map configuration information.
h3cIfQoSPriMapGroupEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.9.1.2.1		not-accessible	Map group information entry.
I32 h3cIfQoSPriMapGroupExportValue	1.3.6.1.4.1.43.45.1.10.2.65.1.9.1.3.1.2	Integer32	read-create	Priority map table output. Different map has different h3cIfQoSPriMapGroupExportValue. dot1p-dp: 0..7 dot1p-dscp: 0..63 dot1p-lp: 0..7 dscp-dot1p: 0..7 dscp-dp: 0..7 dscp-dscp: 0..63 dscp-lp: 0..7 exp-dp: 0..7 exp-lp: 0..7
I32 h3cIfQoSPriMapGroupImportValue	1.3.6.1.4.1.43.45.1.10.2.65.1.9.1.3.1.1	Integer32	not-accessible	Priority map table import value list. Different map has different h3cIfQoSPriMapConfigImportValue. Map-name Range of h3cIfQoSPriMapConfigImportValue dot1p-dp (0..7) dot1p-dscp (0..7) dot1p-lp (0..7) dscp-dot1p (0..63) dscp-dp (0..63) dscp-dscp (0..63) dscp-lp(7) (0..63) exp-dp(8) (0..7) exp-lp (0..7)
I32 h3cIfQoSPriMapGroupIndex	1.3.6.1.4.1.43.45.1.10.2.65.1.9.1.2.1.1	Integer32	not-accessible	The index of map, which are defined by system and user. The index of system defined map is 1 to 9. System defined map-name/map-index pairs like this: Map-index Map-name 1 dot1p-dp 2 dot1p-dscp 3 dot1p-lp 4 dscp-dot1p 5 dscp-dp 6 dscp-dscp 7 dscp-lp 8 exp-dp 9 exp-lp
OCT h3cIfQoSPriMapGroupName	1.3.6.1.4.1.43.45.1.10.2.65.1.9.1.2.1.3	OCTET STRING	read-create	The name of map group.
I32 h3cIfQoSPriMapGroupNextIndex	1.3.6.1.4.1.43.45.1.10.2.65.1.9.1.1	Integer32	read-only	This object contains an appropriate value to be used for h3cIfQoSPriMapGroupIndex when creating rows in the h3cIfQoSPriMapGroupTable. Begin with 64.
ROW h3cIfQoSPriMapGroupRowStatus	1.3.6.1.4.1.43.45.1.10.2.65.1.9.1.2.1.4	RowStatus	read-create	RowStatus.
h3cIfQoSPriMapGroupTable	1.3.6.1.4.1.43.45.1.10.2.65.1.9.1.2		not-accessible	A table of map group information.
INT h3cIfQoSPriMapGroupType	1.3.6.1.4.1.43.45.1.10.2.65.1.9.1.2.1.2	INTEGER	read-create	The type of map group.
h3cIfQoSQmtokenEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.2.6.1.1		not-accessible	Qmtoken information entry.
h3cIfQoSQmtokenGroup	1.3.6.1.4.1.43.45.1.10.2.65.1.2.6
I32 h3cIfQoSQmtokenNumber	1.3.6.1.4.1.43.45.1.10.2.65.1.2.6.1.1.1	Integer32	read-create	The number of tokens.
ROW h3cIfQoSQmtokenRosStatus	1.3.6.1.4.1.43.45.1.10.2.65.1.2.6.1.1.2	RowStatus	read-create	RowStatus
h3cIfQoSQmtokenTable	1.3.6.1.4.1.43.45.1.10.2.65.1.2.6.1		not-accessible	A table of qmtoken information.
I32 h3cIfQoSQSMaxDelay	1.3.6.1.4.1.43.45.1.10.2.65.1.1.1.2.1.5	Integer32	read-write	Max delay.
I32 h3cIfQoSQSMinBandwidth	1.3.6.1.4.1.43.45.1.10.2.65.1.1.1.2.1.6	Integer32	read-write	Min bandwidth. Unit: kbps.
INT h3cIfQoSQSMode	1.3.6.1.4.1.43.45.1.10.2.65.1.1.1.1.1.1	INTEGER	read-write	The mode of schedule.
h3cIfQoSQSModeEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.1.1.1.1		not-accessible	Queue schedule mode information entry.
h3cIfQoSQSModeTable	1.3.6.1.4.1.43.45.1.10.2.65.1.1.1.1		not-accessible	A table of queue schedule mode information.
INT h3cIfQoSQSType	1.3.6.1.4.1.43.45.1.10.2.65.1.1.1.2.1.3	INTEGER	read-write	Schedule type.
I32 h3cIfQoSQSValue	1.3.6.1.4.1.43.45.1.10.2.65.1.1.1.2.1.4	Integer32	read-write	Schedule value.
h3cIfQoSQSWeightEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.1.1.2.1		not-accessible	Queue schedule weight configuration information entry.
h3cIfQoSQSWeightTable	1.3.6.1.4.1.43.45.1.10.2.65.1.1.1.2		not-accessible	A table of queue schedule weight configuration information.
INT h3cIfQoSQueueGroupType	1.3.6.1.4.1.43.45.1.10.2.65.1.1.1.2.1.2	INTEGER	read-write	Group type of WRR and WFQ.
I32 h3cIfQoSQueueID	1.3.6.1.4.1.43.45.1.10.2.65.1.1.1.2.1.1	Integer32	not-accessible	Queue ID
U32 h3cIfQoSQueueLengthInBytes	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.8	Unsigned32	read-only	The max bytes of packets which the queue can hold.
U32 h3cIfQoSQueueLengthInPkts	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.7	Unsigned32	read-only	The max number of packets which the queue can hold.
I32 h3cIfQoSReservedBandwidthPct	1.3.6.1.4.1.43.45.1.10.2.65.1.2.5.1.1.2	Integer32	read-create	Max reserved bandwidth of the interface for QoS.
ROW h3cIfQoSRowStatus	1.3.6.1.4.1.43.45.1.10.2.65.1.3.1.1.5	RowStatus	read-create	RowStatus.
U32 h3cIfQoSRTPQCbs	1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.1.1.1.4	Unsigned32	read-create	Committed Burst Size. Unit: byte
h3cIfQoSRTPQConfigEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.1.1.1		not-accessible	The information of Real-time protocol queue entry.
h3cIfQoSRTPQConfigGroup	1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.1
h3cIfQoSRTPQConfigTable	1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.1.1		not-accessible	A table of Real-time protocol queue information.
C64 h3cIfQoSRTPQDiscardPackets	1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.2.1.1.4	Counter64	read-only	The number of discard packets.
I32 h3cIfQoSRTPQEndPort	1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.1.1.1.2	Integer32	read-create	Maximum threshold of UDP destination port.
h3cIfQoSRTPQObject	1.3.6.1.4.1.43.45.1.10.2.65.1.2.7
C64 h3cIfQoSRTPQOutputPackets	1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.2.1.1.3	Counter64	read-only	The number of output packets.
I32 h3cIfQoSRTPQPacketNumber	1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.2.1.1.1	Integer32	read-only	The number of packets in the Real-time protocol queue.
I32 h3cIfQoSRTPQPacketSize	1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.2.1.1.2	Integer32	read-only	The size of Real-time protocol queue.
I32 h3cIfQoSRTPQReservedBandwidth	1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.1.1.1.3	Integer32	read-create	Maximum bandwidth. unit : kbps
ROW h3cIfQoSRTPQRowStatus	1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.1.1.1.5	RowStatus	read-create	RowStatus.
h3cIfQoSRTPQRunInfoEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.2.1.1		not-accessible	Statistic information of Real-time protocol information entry.
h3cIfQoSRTPQRunInfoGroup	1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.2
h3cIfQoSRTPQRunInfoTable	1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.2.1		not-accessible	A table of statistic information of Real-time protocol information.
I32 h3cIfQoSRTPQStartPort	1.3.6.1.4.1.43.45.1.10.2.65.1.2.7.1.1.1.1	Integer32	read-create	Minimum threshold of UDP destination port.
h3cIfQoSSoftwareQueueObjects	1.3.6.1.4.1.43.45.1.10.2.65.1.2
U32 h3cIfQoSTailDropBPS	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.16	Unsigned32	read-only	The BPS of packets dropped by tail dropping.
C64 h3cIfQoSTailDropBytes	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.14	Counter64	read-only	The bytes of packets dropped by tail dropping.
C64 h3cIfQoSTailDropPkts	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.13	Counter64	read-only	The number of packets dropped by tail dropping.
U32 h3cIfQoSTailDropPPS	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.15	Unsigned32	read-only	The PPS of packets dropped by tail dropping.
U32 h3cIfQoSTricolorCarCbs	1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.5	Unsigned32	read-create	Committed Burst Size. Unit: byte.
U32 h3cIfQoSTricolorCarCir	1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.4	Unsigned32	read-create	Committed Information Rate. Unit: kbps.
h3cIfQoSTricolorCarConfigEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1		not-accessible	Tricolor car configuration information entry.
h3cIfQoSTricolorCarConfigTable	1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1		not-accessible	A table of tricolor car configuration information.
DIR h3cIfQoSTricolorCarDirection	1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.1	Direction	not-accessible	Direction.
U32 h3cIfQoSTricolorCarEbs	1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.6	Unsigned32	read-create	Excess Burst Size. Unit: byte.
CAR h3cIfQoSTricolorCarGreenActionType	1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.8	CarAction	read-create	Green Action.
I32 h3cIfQoSTricolorCarGreenActionValue	1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.9	Integer32	read-create	The value is to remark when green action is remarking. For remark-dscp-continue and remark-dscp-pass, the range is 0~63; For remark-ip-continue and remark-ip-pass and remark-mplsexp-continue and remark-mplsexp-pass and remark-dot1p-continue and remark-dot1p-pass, the range is 0~7; For remark-fr-de-continue and remark-fr-de-pass and remark-atm-clp-continue and remark-atm-clp-pass, the range is 0~1. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set.
C64 h3cIfQoSTricolorCarGreenBytes	1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.2.1.2	Counter64	read-only	The number of green bytes.
C64 h3cIfQoSTricolorCarGreenPackets	1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.2.1.1	Counter64	read-only	The number of green packets.
h3cIfQoSTricolorCarGroup	1.3.6.1.4.1.43.45.1.10.2.65.1.4.2
U32 h3cIfQoSTricolorCarPir	1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.7	Unsigned32	read-create	Peak Information Rate. Unit: kbps.
CAR h3cIfQoSTricolorCarRedActionType	1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.12	CarAction	read-create	Red Action
I32 h3cIfQoSTricolorCarRedActionValue	1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.13	Integer32	read-create	The value is to remark when red action is remarking. For remark-dscp-continue and remark-dscp-pass, the range is 0~63; For remark-ip-continue and remark-ip-pass and remark-mplsexp-continue and remark-mplsexp-pass and remark-dot1p-continue and remark-dot1p-pass, the range is 0~7; For remark-fr-de-continue and remark-fr-de-pass and remark-atm-clp-continue and remark-atm-clp-pass, the range is 0~1. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set.
C64 h3cIfQoSTricolorCarRedBytes	1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.2.1.6	Counter64	read-only	The number of red bytes.
C64 h3cIfQoSTricolorCarRedPackets	1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.2.1.5	Counter64	read-only	The number of red packets.
ROW h3cIfQoSTricolorCarRowStatus	1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.14	RowStatus	read-create	RowStatus.
h3cIfQoSTricolorCarRunInfoEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.2.1		not-accessible	Tricolor car statistic information entry.
h3cIfQoSTricolorCarRunInfoTable	1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.2		not-accessible	A table of tricolor car statistic information.
INT h3cIfQoSTricolorCarType	1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.2	INTEGER	not-accessible	The index of the table, which is the matching type for the packets on interface: ipv4acl, ipv6acl, carl, any.
I32 h3cIfQoSTricolorCarValue	1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.3	Integer32	not-accessible	The index of the table. ipv4acl: the number is ipv4 acl number; ipv6acl: the number is ipv6 acl number; carl: the number is CARL number; any: the number is 0;
CAR h3cIfQoSTricolorCarYellowActionType	1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.10	CarAction	read-create	Yellow Action.
I32 h3cIfQoSTricolorCarYellowActionValue	1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.1.1.11	Integer32	read-create	The value is to remark when yellow action is remarking. For remark-dscp-continue and remark-dscp-pass, the range is 0~63; For remark-ip-continue and remark-ip-pass and remark-mplsexp-continue and remark-mplsexp-pass and remark-dot1p-continue and remark-dot1p-pass, the range is 0~7; For remark-fr-de-continue and remark-fr-de-pass and remark-atm-clp-continue and remark-atm-clp-pass, the range is 0~1. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set.
C64 h3cIfQoSTricolorCarYellowBytes	1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.2.1.4	Counter64	read-only	The number of yellow bytes.
C64 h3cIfQoSTricolorCarYellowPackets	1.3.6.1.4.1.43.45.1.10.2.65.1.4.2.2.1.3	Counter64	read-only	The number of yellow packets.
h3cIfQoSWFQConfigGroup	1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.1
C64 h3cIfQoSWFQDiscardPackets	1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.2.1.1.3	Counter64	read-only	The number of discarded packets in all the queues.
h3cIfQoSWFQEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.1.1.1		not-accessible	Weighted fair queue information entry.
I32 h3cIfQoSWFQHashedActiveQueues	1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.2.1.1.4	Integer32	read-only	The number of active queues.
I32 h3cIfQoSWFQHashedMaxActiveQueues	1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.2.1.1.5	Integer32	read-only	The number of maximum active queues.
I32 h3cIfQoSWFQLength	1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.2.1.1.2	Integer32	read-only	The length of weighted fair queue.
h3cIfQoSWFQObject	1.3.6.1.4.1.43.45.1.10.2.65.1.2.4
I32 h3cIfQoSWFQQueueLength	1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.1.1.1.1	Integer32	read-create	The length of weighted fair queue.
INT h3cIfQoSWFQQueueNumber	1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.1.1.1.2	INTEGER	read-create	The number of weighted fair queue.
ROW h3cIfQoSWFQRowStatus	1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.1.1.1.3	RowStatus	read-create	RowStatus.
h3cIfQoSWFQRunInfoEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.2.1.1		not-accessible	Weighted fair queue statistic information entry.
h3cIfQoSWFQRunInfoGroup	1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.2
h3cIfQoSWFQRunInfoTable	1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.2.1		not-accessible	A table of weighted fair queue statistic information.
I32 h3cIfQoSWFQSize	1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.2.1.1.1	Integer32	read-only	The number of packets in all the queues
h3cIfQoSWFQTable	1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.1.1		not-accessible	A table of weighted fair queue information.
INT h3cIfQoSWFQType	1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.1.1.1.4	INTEGER	read-create	The type of weighted fair queue.
h3cIfQoSWredApplyIfRunInfoEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.5.1		not-accessible	WRED statistic information.
h3cIfQoSWredApplyIfRunInfoTable	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.5		not-accessible	A table of WRED statistic information.
I32 h3cIfQoSWredDiscardProb	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.3.1.5	Integer32	read-create	Discard probability.
U32 h3cIfQoSWredDropBPS	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.20	Unsigned32	read-only	The BPS of packets dropped by WRED.
C64 h3cIfQoSWredDropBytes	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.18	Counter64	read-only	The bytes of packets dropped by WRED.
U32 h3cIfQoSWredDropHPreNTcpBPS	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.12	Unsigned32	read-only	The BPS of high-precedence non-TCP packets dropped by WRED.
C64 h3cIfQoSWredDropHPreNTcpBytes	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.10	Counter64	read-only	The bytes of high-precedence non-TCP packets dropped by WRED.
C64 h3cIfQoSWredDropHPreNTcpPkts	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.9	Counter64	read-only	The number of high-precedence non-TCP packets dropped by WRED.
U32 h3cIfQoSWredDropHPreNTcpPPS	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.11	Unsigned32	read-only	The PPS of high-precedence non-TCP packets dropped by WRED.
U32 h3cIfQoSWredDropHPreTcpBPS	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.16	Unsigned32	read-only	The BPS of high-precedence TCP packets dropped by WRED.
C64 h3cIfQoSWredDropHPreTcpBytes	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.14	Counter64	read-only	The bytes of high-precedence TCP packets dropped by WRED.
C64 h3cIfQoSWredDropHPreTcpPkts	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.13	Counter64	read-only	The number of high-precedence TCP packets dropped by WRED.
U32 h3cIfQoSWredDropHPreTcpPPS	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.15	Unsigned32	read-only	The PPS of high-precedence TCP packets dropped by WRED.
U32 h3cIfQoSWredDropLPreNTcpBPS	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.4	Unsigned32	read-only	The BPS of low-precedence non-TCP packets dropped by WRED. BPS: bytes per second.
C64 h3cIfQoSWredDropLPreNTcpBytes	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.2	Counter64	read-only	The bytes of low-precedence non-TCP packets dropped by WRED.
C64 h3cIfQoSWredDropLPreNTcpPkts	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.1	Counter64	read-only	The number of low-precedence non-TCP packets dropped by WRED.
U32 h3cIfQoSWredDropLPreNTcpPPS	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.3	Unsigned32	read-only	The PPS of low-precedence non-TCP packets dropped by WRED. PPS: packets per second.
U32 h3cIfQoSWredDropLPreTcpBPS	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.8	Unsigned32	read-only	The BPS of low-precedence TCP packets dropped by WRED.
C64 h3cIfQoSWredDropLPreTcpBytes	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.6	Counter64	read-only	The bytes of low-precedence TCP packets dropped by WRED.
C64 h3cIfQoSWredDropLPreTcpPkts	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.5	Counter64	read-only	The number of low-precedence TCP packets dropped by WRED.
U32 h3cIfQoSWredDropLPreTcpPPS	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.2.1.7	Unsigned32	read-only	The PPS of low-precedence TCP packets dropped by WRED.
C64 h3cIfQoSWredDropPkts	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.17	Counter64	read-only	The number of packets dropped by WRED.
U32 h3cIfQoSWredDropPPS	1.3.6.1.4.1.43.45.1.10.2.65.1.1.2.1.1.19	Unsigned32	read-only	The PPS of packets dropped by WRED.
h3cIfQoSWredGroupApplyIfEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.4.1		not-accessible	WRED group applied interface information.
h3cIfQoSWredGroupApplyIfTable	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.4		not-accessible	A table of WRED group applied interface information.
I32 h3cIfQoSWredGroupApplyIndex	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.4.1.1	Integer32	read-create	WRED group index.
OCT h3cIfQoSWredGroupApplyName	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.4.1.2	OCTET STRING	read-only	WRED group name.
h3cIfQoSWredGroupContentEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.3.1		not-accessible	Priority WRED information entry.
I32 h3cIfQoSWredGroupContentIndex	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.3.1.1	Integer32	not-accessible	The priority of a packet. Different type of packet has different priority. Type of priority Range of priority dot1p 0..7 ippre 0..7 dscp 0..63 atmclp 0..1 frde 0..1 exp 0..7 queue 0..7 ( defined by product ) dropLevel 0..2
I32 h3cIfQoSWredGroupContentSubIndex	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.3.1.2	Integer32	not-accessible	The sub index. Different type of packet has different value. Type of priority Range of value queue 0..2 other types : 0
h3cIfQoSWredGroupContentTable	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.3		not-accessible	A table of priority WRED information.
h3cIfQoSWredGroupEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.2.1		not-accessible	WRED group information.
I32 h3cIfQoSWredGroupExponent	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.3.1.6	Integer32	read-create	Exponent for WRED calculates the average length of queue. Only 'h3cIfQoSWredGroupType' is 'queue', the object is effective. This object is designed to indicate the exponent of each queue of the queue WRED group.
h3cIfQoSWredGroupGroup	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1
ROW h3cIfQoSWredGroupIfRowStatus	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.4.1.3	RowStatus	read-create	RowStatus.
I32 h3cIfQoSWredGroupIndex	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.2.1.1	Integer32	not-accessible	WRED group index.
OCT h3cIfQoSWredGroupName	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.2.1.2	OCTET STRING	read-create	WRED group name.
I32 h3cIfQoSWredGroupNextIndex	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.1	Integer32	read-only	This object contains an appropriate value to be used for h3cIfQoSWredGroupIndex when creating rows in the h3cIfQoSWredGroupTable. Begin with 0.
ROW h3cIfQoSWredGroupRowStatus	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.2.1.6	RowStatus	read-create	RowStatus.
h3cIfQoSWredGroupTable	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.2		not-accessible	A table of WRED group information.
INT h3cIfQoSWredGroupType	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.2.1.3	INTEGER	read-create	Type of WRED group.
I32 h3cIfQoSWredGroupWeightingConstant	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.2.1.4	Integer32	read-create	Exponent for WRED calculates the average length of queue. If 'h3cIfQoSWredGroupType' is 'queue', the object is ineffective. So, it must use the object, which is 'h3cIfQoSWredGroupExponent' of h3cIfQoSWredGroupContentTable, to indicate the exponent of each queue of the queue WRED group.
I32 h3cIfQoSWredHighLimit	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.3.1.4	Integer32	read-create	Discard high limit.
I32 h3cIfQoSWredLowLimit	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.3.1.3	Integer32	read-create	Discard low limit.
h3cIfQoSWREDObjects	1.3.6.1.4.1.43.45.1.10.2.65.1.6
C64 h3cIfQoSWredPreRandomDropNum	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.5.1.1	Counter64	read-only	The number of random drop.
C64 h3cIfQoSWredPreTailDropNum	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.5.1.2	Counter64	read-only	The number of tail drop.
C64 h3cIfQoSWREDRandomDropNum	1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.3.1.2	Counter64	read-only	The number of random drop.
ROW h3cIfQoSWredRowStatus	1.3.6.1.4.1.43.45.1.10.2.65.1.6.1.3.1.7	RowStatus	read-create	RowStatus.
C64 h3cIfQoSWREDTailDropNum	1.3.6.1.4.1.43.45.1.10.2.65.1.6.2.3.1.1	Counter64	read-only	The number of tail drop.
h3cQos2	1.3.6.1.4.1.43.45.1.10.2.65
DIR h3cQoSIfTraStaConfigDirection	1.3.6.1.4.1.43.45.1.10.2.65.1.11.1.1.1.1	Direction	not-accessible	The direction of the traffic statistics.
OCT h3cQoSIfTraStaConfigDot1p	1.3.6.1.4.1.43.45.1.10.2.65.1.11.1.1.1.3	OCTET STRING	read-create	The bitmap of Dot1p value. The octet specifies Dot1p values 0 through 7. If a bit has a value of '1', the corresponding Dot1p value is configured in the set of Dot1p values; if a bit has a value of '0', the corresponding Dot1p value is not configured.
OCT h3cQoSIfTraStaConfigDscp	1.3.6.1.4.1.43.45.1.10.2.65.1.11.1.1.1.4	OCTET STRING	read-create	The bitmap of Dscp value. Each octet within this value specifies a set of eight Dscp values, with the first octet specifying Dscp values 0 through 7, the second octet specifying Dscp values 8 through 15, etc. If a bit has a value of '1', the corresponding Dscp value is configured in the set of Dscp values; if a bit has a value of '0', the corresponding Dscp value is not configured.
h3cQoSIfTraStaConfigInfoEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.11.1.1.1		not-accessible	An entry of interface traffic statistics configuration information.
h3cQoSIfTraStaConfigInfoTable	1.3.6.1.4.1.43.45.1.10.2.65.1.11.1.1		not-accessible	A table of traffic statistics configuration information.
OCT h3cQoSIfTraStaConfigQueue	1.3.6.1.4.1.43.45.1.10.2.65.1.11.1.1.1.2	OCTET STRING	read-create	The bitmap of Queue ID. The octet specifies queues 0 through 7. If a bit has a value of '1', the corresponding queue is configured in the set of Queues; if a bit has a value of '0', the corresponding queue is not configured.
ROW h3cQoSIfTraStaConfigStatus	1.3.6.1.4.1.43.45.1.10.2.65.1.11.1.1.1.6	RowStatus	read-create	The row status of this table entry.
OCT h3cQoSIfTraStaConfigVlan	1.3.6.1.4.1.43.45.1.10.2.65.1.11.1.1.1.5	OCTET STRING	read-create	The bitmap of VLAN ID. Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 0 through 7, the second octet specifying VLANs 8 through 15, etc. If a bit has a value of '1', the corresponding VLAN is configured in the set of VLANs; if a bit has a value of '0', the corresponding VLAN is not configured.
DIR h3cQoSIfTraStaRunDirection	1.3.6.1.4.1.43.45.1.10.2.65.1.11.2.1.1.3	Direction	not-accessible	The direction of the traffic statistics.
C64 h3cQoSIfTraStaRunDropBytes	1.3.6.1.4.1.43.45.1.10.2.65.1.11.2.1.1.7	Counter64	read-only	Number of dropped bytes.
C64 h3cQoSIfTraStaRunDropPackets	1.3.6.1.4.1.43.45.1.10.2.65.1.11.2.1.1.5	Counter64	read-only	Number of dropped packets.
h3cQoSIfTraStaRunInfoEntry	1.3.6.1.4.1.43.45.1.10.2.65.1.11.2.1.1		not-accessible	An entry of interface traffic statistics running information.
h3cQoSIfTraStaRunInfoTable	1.3.6.1.4.1.43.45.1.10.2.65.1.11.2.1		not-accessible	A table of traffic statistics running information.
INT h3cQoSIfTraStaRunObjectType	1.3.6.1.4.1.43.45.1.10.2.65.1.11.2.1.1.1	INTEGER	not-accessible	Type of statistics object.
I32 h3cQoSIfTraStaRunObjectValue	1.3.6.1.4.1.43.45.1.10.2.65.1.11.2.1.1.2	Integer32	not-accessible	Value range for the object type: for Queue: 0~7 for Dot1p: 0~7 for Dscp: 0~63 for VlanID: 1~4094
C64 h3cQoSIfTraStaRunPassBPS	1.3.6.1.4.1.43.45.1.10.2.65.1.11.2.1.1.9	Counter64	read-only	BPS (bytes per second) of passed packets.
C64 h3cQoSIfTraStaRunPassBytes	1.3.6.1.4.1.43.45.1.10.2.65.1.11.2.1.1.6	Counter64	read-only	Number of passed bytes.
C64 h3cQoSIfTraStaRunPassPackets	1.3.6.1.4.1.43.45.1.10.2.65.1.11.2.1.1.4	Counter64	read-only	Number of passed packets.
C64 h3cQoSIfTraStaRunPassPPS	1.3.6.1.4.1.43.45.1.10.2.65.1.11.2.1.1.8	Counter64	read-only	PPS (packets per second) of passed packets.
h3cQoSTraStaConfigGroup	1.3.6.1.4.1.43.45.1.10.2.65.1.11.1
h3cQoSTraStaObjects	1.3.6.1.4.1.43.45.1.10.2.65.1.11
h3cQoSTraStaRunGroup	1.3.6.1.4.1.43.45.1.10.2.65.1.11.2
I32 h3fIfQosWFQhashedTotalQueues	1.3.6.1.4.1.43.45.1.10.2.65.1.2.4.2.1.1.6	Integer32	read-only	The number of queues.

RFC description

Configures interface quality-of-service policies including priority queuing and bandwidth management.

Start monitoring H3C/3Com switches and routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download A3COM-HUAWEI-IFQOS2-MIB