ZYXEL-GS4024-MIB

All MIBs › ZYXEL-GS4024-MIB

Organization: ZyXEL

Last Updated: 2004-11-03

Category: ZyXEL ES and GS Switch Platform

Description: Defines ZyXEL GS-4024 24-port Gigabit managed switch specific configuration and operational objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZYXEL-GS4024-MIB?

ZYXEL-GS4024-MIB is a ZyXEL (enterprise OID 890) proprietary MIB for the GS-4024 managed Gigabit switch, reporting software/hardware version and configuring per-port rate limiting. Its objects cover software platform major/minor version, model string, version-control number, build date, hardware major/minor version, serial number, a global rate-limit-enable flag, a per-port rate-limit table (state, committed/peak ingress rate, egress rate), and global broadcast/multicast/DLF storm-control enable with per-port state/rate tables. As a configuration/status MIB it lets an administrator confirm firmware version and per-port rate-limiting/storm-control settings on a ZyXEL GS-4024 switch. It is deployed on the ZyXEL GS-4024 managed Gigabit switch. Engineers can download the ZYXEL-GS4024-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZYXEL-GS4024-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZyXEL GS-4024 managed Gigabit switch

Monitoring Examples

An administrator checks rateLimitPortCommitRate and rateLimitPortPeakRate to confirm committed vs. peak ingress rate limiting on a ZyXEL GS-4024 switch port.

What Can Be Monitored

per-port rate limiting and storm-control configuration

Imported Objects

From BRIDGE-MIB

dot1dBasePort

OBJECT-TYPE

From DISMAN-PING-MIB

OperationResponseStatus

From IF-MIB

InterfaceIndexOrZero

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From OSPF-MIB

ospfAddressLessIf
ospfAreaId	OBJECT-TYPE
ospfIfIpAddress
ospfLsdbAreaId
ospfLsdbLsid
ospfLsdbRouterId
ospfLsdbType
ospfNbrAddressLessIndex
ospfNbrIpAddr
ospfVirtIfAreaId
ospfVirtIfNeighbor

From P-BRIDGE-MIB

EnabledStatus

From Q-BRIDGE-MIB

PortList

From RFC1155-SMI

IpAddress
enterprises

From RFC1213-MIB

DisplayString

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-MIB

sysObjectID

OBJECT-TYPE

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
MacAddress
RowStatus
StorageType
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using fanRpmCurValue OID:

Select a ZyXEL GS-4024 managed Gigabit switch (firmware-version/per-port rate-limit/storm-control status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type fanRpmCurValue into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the current speed in Revolutions Per Minute (RPM) on the fan. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the speed drops below the level expected for a healthy, spinning fan, since a stalled or slowing fan often precedes overheating. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
zyxel	1.3.6.1.4.1.890
products	1.3.6.1.4.1.890.1
accessSwitch	1.3.6.1.4.1.890.1.5
esSeries	1.3.6.1.4.1.890.1.5.8
gs4024	1.3.6.1.4.1.890.1.5.8.13
sysInfo	1.3.6.1.4.1.890.1.5.8.13.1
INT sysSwPlatformMajorVers	1.3.6.1.4.1.890.1.5.8.13.1.1	INTEGER	read-only	SW platform major version, e.g. 3.
INT sysSwPlatformMinorVers	1.3.6.1.4.1.890.1.5.8.13.1.2	INTEGER	read-only	SW platform minor version, e.g. 50.
STR sysSwModelString	1.3.6.1.4.1.890.1.5.8.13.1.3	DisplayString	read-only	Model letters, e.g. TJ
INT sysSwVersionControlNbr	1.3.6.1.4.1.890.1.5.8.13.1.4	INTEGER	read-only	Version control number, e.g. 0.
INT sysSwDay	1.3.6.1.4.1.890.1.5.8.13.1.5	INTEGER	read-only	SW compilation day, e.g. 19.
INT sysSwMonth	1.3.6.1.4.1.890.1.5.8.13.1.6	INTEGER	read-only	SW compilation month, e.g. 8.
INT sysSwYear	1.3.6.1.4.1.890.1.5.8.13.1.7	INTEGER	read-only	SW compilation year, e.g. 2004.
INT sysHwMajorVers	1.3.6.1.4.1.890.1.5.8.13.1.8	INTEGER	read-only	HW major version number, e.g. 1.
INT sysHwMinorVers	1.3.6.1.4.1.890.1.5.8.13.1.9	INTEGER	read-only	HW minor version number, e.g. 0.
STR sysSerialNumber	1.3.6.1.4.1.890.1.5.8.13.1.10	DisplayString	read-only	Serial number
rateLimitSetup	1.3.6.1.4.1.890.1.5.8.13.2
ENA rateLimitState	1.3.6.1.4.1.890.1.5.8.13.2.1	EnabledStatus	read-write	Ingress/egress rate limiting enabled/disabled for the switch.
rateLimitPortTable	1.3.6.1.4.1.890.1.5.8.13.2.2		not-accessible
rateLimitPortEntry	1.3.6.1.4.1.890.1.5.8.13.2.2.1		not-accessible	An entry in rateLimitPortTable.
ENA rateLimitPortState	1.3.6.1.4.1.890.1.5.8.13.2.2.1.1	EnabledStatus	read-write	Ingress/egress rate limiting enabled/disabled on the port.
INT rateLimitPortCommitRate	1.3.6.1.4.1.890.1.5.8.13.2.2.1.2	INTEGER	read-write	Commit rate in Kbit/s. The range of FE port is between 0 and 100,000. For GE port, the range is between 0 and 1000,000.
INT rateLimitPortPeakRate	1.3.6.1.4.1.890.1.5.8.13.2.2.1.3	INTEGER	read-write	Peak rate in Kbit/s. The range of FE port is between 1 and 100,000. For GE port, the range is between 1 and 1000,000.
INT rateLimitPortEgrRate	1.3.6.1.4.1.890.1.5.8.13.2.2.1.4	INTEGER	read-write	Egress rate in Mbit/s. The granularity of FE port is between 1 and 100. For GE port, the granularity is between 1 and 1000.
brLimitSetup	1.3.6.1.4.1.890.1.5.8.13.3
ENA brLimitState	1.3.6.1.4.1.890.1.5.8.13.3.1	EnabledStatus	read-write	Broadcast/multicast/DLF rate limiting enabled/disabled for the switch.
brLimitPortTable	1.3.6.1.4.1.890.1.5.8.13.3.2		not-accessible
brLimitPortEntry	1.3.6.1.4.1.890.1.5.8.13.3.2.1		not-accessible	An entry in brLimitPortTable.
ENA brLimitPortBrState	1.3.6.1.4.1.890.1.5.8.13.3.2.1.1	EnabledStatus	read-write	Broadcast rate limiting enabled/disabled on the port.
INT brLimitPortBrRate	1.3.6.1.4.1.890.1.5.8.13.3.2.1.2	INTEGER	read-write	Allowed broadcast rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143.
ENA brLimitPortMcState	1.3.6.1.4.1.890.1.5.8.13.3.2.1.3	EnabledStatus	read-write	Multicast rate limiting enabled/disabled on the port.
INT brLimitPortMcRate	1.3.6.1.4.1.890.1.5.8.13.3.2.1.4	INTEGER	read-write	AAllowed mullticast rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143.
ENA brLimitPortDlfState	1.3.6.1.4.1.890.1.5.8.13.3.2.1.5	EnabledStatus	read-write	Destination lookup failure frames rate limiting enabled/disabled on the port.
INT brLimitPortDlfRate	1.3.6.1.4.1.890.1.5.8.13.3.2.1.6	INTEGER	read-write	Allowed destination lookup failure frames rate in pkts/s. For FE port, the maximum value is 148800. For GE port, the maximum value is 262143.
portSecuritySetup	1.3.6.1.4.1.890.1.5.8.13.4
ENA portSecurityState	1.3.6.1.4.1.890.1.5.8.13.4.1	EnabledStatus	read-write
portSecurityPortTable	1.3.6.1.4.1.890.1.5.8.13.4.2		not-accessible
portSecurityPortEntry	1.3.6.1.4.1.890.1.5.8.13.4.2.1		not-accessible	An entry in portSecurityPortTable.
ENA portSecurityPortState	1.3.6.1.4.1.890.1.5.8.13.4.2.1.1	EnabledStatus	read-write	Port Security enabled/disabled on the port. Active(1) means this port only accept frames from static MAC addresses that are configured for the port, and dynamic MAC address frames up to the number specified by portSecurityPortCount object.
ENA portSecurityPortLearnState	1.3.6.1.4.1.890.1.5.8.13.4.2.1.2	EnabledStatus	read-write	MAC address learning enabled/disable on the port.
INT portSecurityPortCount	1.3.6.1.4.1.890.1.5.8.13.4.2.1.3	INTEGER	read-write	Number of (dynamic) MAC addresses that may be learned on the port.
POR portSecurityMacFreeze	1.3.6.1.4.1.890.1.5.8.13.4.3	PortList	read-write
vlanTrunkSetup	1.3.6.1.4.1.890.1.5.8.13.5
vlanTrunkPortTable	1.3.6.1.4.1.890.1.5.8.13.5.1		not-accessible
vlanTrunkPortEntry	1.3.6.1.4.1.890.1.5.8.13.5.1.1		not-accessible	An entry in vlanTrunkPortTable.
ENA vlanTrunkPortState	1.3.6.1.4.1.890.1.5.8.13.5.1.1.1	EnabledStatus	read-write	VlanTrunking enabled/disabled on the port. Active(1) to allow frames belonging to unknown VLAN groups to pass through the switch.
ctlProtTransSetup	1.3.6.1.4.1.890.1.5.8.13.6
ENA ctlProtTransState	1.3.6.1.4.1.890.1.5.8.13.6.1	EnabledStatus	read-write	Bridge control protocol transparency enabled/disabled for the switch
ctlProtTransTunnelPortTable	1.3.6.1.4.1.890.1.5.8.13.6.2		not-accessible
ctlProtTransTunnelPortEntry	1.3.6.1.4.1.890.1.5.8.13.6.2.1		not-accessible	An entry in ctlProtTransTunnelPortTable.
INT ctlProtTransTunnelMode	1.3.6.1.4.1.890.1.5.8.13.6.2.1.1	INTEGER	read-write	Bridge control protocol transparency mode for the port. Modes: Peer(0), Tunnel(1), Discard(2), Network(3)
vlanStackSetup	1.3.6.1.4.1.890.1.5.8.13.7
ENA vlanStackState	1.3.6.1.4.1.890.1.5.8.13.7.1	EnabledStatus	read-write	VLAN Stacking enabled/disabled for the switch.
INT vlanStackTpid	1.3.6.1.4.1.890.1.5.8.13.7.2	INTEGER	read-write	SP TPID in hex format, e.g. 8100.
vlanStackPortTable	1.3.6.1.4.1.890.1.5.8.13.7.3		not-accessible
vlanStackPortEntry	1.3.6.1.4.1.890.1.5.8.13.7.3.1		not-accessible	An entry in vlanStackPortTable.
INT vlanStackPortMode	1.3.6.1.4.1.890.1.5.8.13.7.3.1.1	INTEGER	read-write	Mode of the port.Set Access mode to have the switch add the SP TPID tag to all incoming frames received on this port. Set Access mode for ingress ports at the edge of the service provider's network. Set Tunnel mode (available for Gigabit ports only) for egress ports at the edge of the service provider's network. In order to support VLAN stacking on a port, the port must be able to allow frames of 1526 Bytes (1522 Bytes + 4 Bytes for the second tag) to pass through it. Access (0), tunnel (1)
INT vlanStackPortVid	1.3.6.1.4.1.890.1.5.8.13.7.3.1.2	INTEGER	read-write	VLAN ID used in service provider tag.
INT vlanStackPortPrio	1.3.6.1.4.1.890.1.5.8.13.7.3.1.3	INTEGER	read-write	Priority value for service provider tag. 0 is the lowest priority level and 7 is the highest.
radius8021xSetup	1.3.6.1.4.1.890.1.5.8.13.8
INT radiusLoginPrecedence	1.3.6.1.4.1.890.1.5.8.13.8.1	INTEGER	read-write	1. Local Only 2. Local then RADIUS 3. RADIUS Only
radiusAnd8021xServer	1.3.6.1.4.1.890.1.5.8.13.8.2
IP radiusIpAddr	1.3.6.1.4.1.890.1.5.8.13.8.2.1	IpAddress	read-write	The IP address of the RADIUS server.
INT radiusUdpPort	1.3.6.1.4.1.890.1.5.8.13.8.2.2	INTEGER	read-write	The UDP port of the RADIUS server.
STR radiusSharedSecret	1.3.6.1.4.1.890.1.5.8.13.8.2.3	DisplayString	read-write	Shared secret used for RADIUS and network eleemnt authentication.
ENA portAuthState	1.3.6.1.4.1.890.1.5.8.13.8.3	EnabledStatus	read-write	802.1x port authentication enabled/disabled for the switch.
portAuthTable	1.3.6.1.4.1.890.1.5.8.13.8.4		not-accessible
portAuthEntry	1.3.6.1.4.1.890.1.5.8.13.8.4.1		not-accessible	An entry in portAuthTable.
ENA portAuthEntryState	1.3.6.1.4.1.890.1.5.8.13.8.4.1.1	EnabledStatus	read-write	802.1x port authentication enabled or disabled on the port.
ENA portReAuthEntryState	1.3.6.1.4.1.890.1.5.8.13.8.4.1.2	EnabledStatus	read-write	802.1x port re-authentication enabled or disabled on the port.
INT portReAuthEntryTimer	1.3.6.1.4.1.890.1.5.8.13.8.4.1.3	INTEGER	read-write	Re-authentication timer in seconds.
hwMonitorInfo	1.3.6.1.4.1.890.1.5.8.13.9
fanRpmTable	1.3.6.1.4.1.890.1.5.8.13.9.1		not-accessible
fanRpmEntry	1.3.6.1.4.1.890.1.5.8.13.9.1.1		not-accessible	An entry in fanRpmTable.
INT fanRpmIndex	1.3.6.1.4.1.890.1.5.8.13.9.1.1.1	INTEGER	read-only	Index of FAN.
INT fanRpmCurValueEx	1.3.6.1.4.1.890.1.5.8.13.9.1.1.2	INTEGER	read-only	Current speed in Revolutions Per Minute (RPM) on the fan.
INT fanRpmMaxValue	1.3.6.1.4.1.890.1.5.8.13.9.1.1.3	INTEGER	read-only	Maximum speed measured in Revolutions Per Minute (RPM) on the fan.
INT fanRpmMinValue	1.3.6.1.4.1.890.1.5.8.13.9.1.1.4	INTEGER	read-only	Minimum speed measured in Revolutions Per Minute (RPM) on the fan.
INT fanRpmLowThresh	1.3.6.1.4.1.890.1.5.8.13.9.1.1.5	INTEGER	read-only	The minimum speed at which a normal fan should work.
STR fanRpmDescr	1.3.6.1.4.1.890.1.5.8.13.9.1.1.6	DisplayString	read-only	'Normal' indicates that this fan is functioning above the minimum speed. 'Error' indicates that this fan is functioning below the minimum speed.
tempTable	1.3.6.1.4.1.890.1.5.8.13.9.2		not-accessible
tempEntry	1.3.6.1.4.1.890.1.5.8.13.9.2.1		not-accessible	An entry in tempTable.
INT tempIndex	1.3.6.1.4.1.890.1.5.8.13.9.2.1.1	INTEGER	read-only	Index of temperature unit. 1:MAC, 2:CPU, 3:PHY
INT tempCurValue	1.3.6.1.4.1.890.1.5.8.13.9.2.1.2	INTEGER	read-only	The current temperature measured at this sensor.
INT tempMaxValue	1.3.6.1.4.1.890.1.5.8.13.9.2.1.3	INTEGER	read-only	The maximum temperature measured at this sensor.
INT tempMinValue	1.3.6.1.4.1.890.1.5.8.13.9.2.1.4	INTEGER	read-only	The minimum temperature measured at this sensor.
INT tempHighThresh	1.3.6.1.4.1.890.1.5.8.13.9.2.1.5	INTEGER	read-only	The upper temperature limit at this sensor.
STR tempDescr	1.3.6.1.4.1.890.1.5.8.13.9.2.1.6	DisplayString	read-only	'Normal' indicates temperatures below the threshold and 'Error' for those above.
voltageTable	1.3.6.1.4.1.890.1.5.8.13.9.3		not-accessible
voltageEntry	1.3.6.1.4.1.890.1.5.8.13.9.3.1		not-accessible	An entry in voltageTable.
INT voltageIndex	1.3.6.1.4.1.890.1.5.8.13.9.3.1.1	INTEGER	read-only	Index of voltage.
INT voltageCurValue	1.3.6.1.4.1.890.1.5.8.13.9.3.1.2	INTEGER	read-only	The current voltage reading.
INT voltageMaxValue	1.3.6.1.4.1.890.1.5.8.13.9.3.1.3	INTEGER	read-only	The maximum voltage measured at this point.
INT voltageMinValue	1.3.6.1.4.1.890.1.5.8.13.9.3.1.4	INTEGER	read-only	The minimum voltage measured at this point.
INT voltageNominalValue	1.3.6.1.4.1.890.1.5.8.13.9.3.1.5	INTEGER	read-only	The normal voltage at wchich the switch work.
INT voltageLowThresh	1.3.6.1.4.1.890.1.5.8.13.9.3.1.6	INTEGER	read-only	The minimum voltage at which the switch should work.
STR voltageDescr	1.3.6.1.4.1.890.1.5.8.13.9.3.1.7	DisplayString	read-only	'Normal' indicates that the voltage is within an acceptable operating range at this point; otherwise 'Error' is displayed.
snmpSetup	1.3.6.1.4.1.890.1.5.8.13.10
STR snmpGetCommunity	1.3.6.1.4.1.890.1.5.8.13.10.1	DisplayString	read-write
STR snmpSetCommunity	1.3.6.1.4.1.890.1.5.8.13.10.2	DisplayString	read-write
STR snmpTrapCommunity	1.3.6.1.4.1.890.1.5.8.13.10.3	DisplayString	read-write
snmpTrapDestTable	1.3.6.1.4.1.890.1.5.8.13.10.4		not-accessible
snmpTrapDestEntry	1.3.6.1.4.1.890.1.5.8.13.10.4.1		not-accessible	An entry in snmpTrapDestTable.
IP snmpTrapDestIP	1.3.6.1.4.1.890.1.5.8.13.10.4.1.1	IpAddress	not-accessible	IP address of trap destination.
ROW snmpTrapDestRowStatus	1.3.6.1.4.1.890.1.5.8.13.10.4.1.2	RowStatus	read-create
dateTimeServerSetup	1.3.6.1.4.1.890.1.5.8.13.11
INT dateTimeServerType	1.3.6.1.4.1.890.1.5.8.13.11.1	INTEGER	read-write	The time service protocol.
IP dateTimeServerIP	1.3.6.1.4.1.890.1.5.8.13.11.2	IpAddress	read-write	IP address of time server.
INT dateTimeZone	1.3.6.1.4.1.890.1.5.8.13.11.3	INTEGER	read-write	The time difference between UTC. Ex: +01
INT dateTimeNewDateYear	1.3.6.1.4.1.890.1.5.8.13.11.4	INTEGER	read-write	The new date in year.
INT dateTimeNewDateMonth	1.3.6.1.4.1.890.1.5.8.13.11.5	INTEGER	read-write	The new date in month.
INT dateTimeNewDateDay	1.3.6.1.4.1.890.1.5.8.13.11.6	INTEGER	read-write	The new date in day.
INT dateTimeNewTimeHour	1.3.6.1.4.1.890.1.5.8.13.11.7	INTEGER	read-write	The new time in hour.
INT dateTimeNewTimeMinute	1.3.6.1.4.1.890.1.5.8.13.11.8	INTEGER	read-write	The new time in minute.
INT dateTimeNewTimeSecond	1.3.6.1.4.1.890.1.5.8.13.11.9	INTEGER	read-write	The new time in second.
sysMgmt	1.3.6.1.4.1.890.1.5.8.13.12
INT sysMgmtConfigSave	1.3.6.1.4.1.890.1.5.8.13.12.1	INTEGER	read-write	If setting value is given, the variable write index will be set and running-config will be written to the assigned configuration file. If not, running-config will be written to the booting one.
INT sysMgmtBootupConfig	1.3.6.1.4.1.890.1.5.8.13.12.2	INTEGER	read-write	The setting value (read index) will be written into non-volatile memory. While rebooting, the variable write index is equal to read index initially. You can change the value of write index by CLI / MIB.
INT sysMgmtReboot	1.3.6.1.4.1.890.1.5.8.13.12.3	INTEGER	read-write	Reboot switch from SNMP. 1:Reboot, 0:Nothing
INT sysMgmtDefaultConfig	1.3.6.1.4.1.890.1.5.8.13.12.4	INTEGER	read-write	Erase running config and reset to default.
INT sysMgmtLastActionStatus	1.3.6.1.4.1.890.1.5.8.13.12.5	INTEGER	read-only	Display status of last mgmt action.
BIT sysMgmtSystemStatus	1.3.6.1.4.1.890.1.5.8.13.12.6	Bits	read-only	This variable indicates the status of the system. The sysMgmtAlarmStatus is a bit map represented a sum, therefore, it can represent multiple defects simultaneously. The sysNoDefect should be set if and only if no other flag is set. The various bit positions are: 0 sysAlarmDetected 1 sysTemperatureError 2 sysFanRPMError 3 sysVoltageRangeError
INT sysMgmtCPUUsage	1.3.6.1.4.1.890.1.5.8.13.12.7	INTEGER	read-only	Show device CPU load in %, it's the snapshot of CPU load when getting the values.
layer2Setup	1.3.6.1.4.1.890.1.5.8.13.13
INT vlanTypeSetup	1.3.6.1.4.1.890.1.5.8.13.13.1	INTEGER	read-write
ENA igmpSnoopingStateSetup	1.3.6.1.4.1.890.1.5.8.13.13.2	EnabledStatus	read-write
ENA tagVlanPortIsolationState	1.3.6.1.4.1.890.1.5.8.13.13.3	EnabledStatus	read-write
ENA stpState	1.3.6.1.4.1.890.1.5.8.13.13.4	EnabledStatus	read-write
ENA igmpFilteringStateSetup	1.3.6.1.4.1.890.1.5.8.13.13.5	EnabledStatus	read-write
INT unknownMulticastFrameForwarding	1.3.6.1.4.1.890.1.5.8.13.13.6	INTEGER	read-write
ipSetup	1.3.6.1.4.1.890.1.5.8.13.14
IP dnsIpAddress	1.3.6.1.4.1.890.1.5.8.13.14.1	IpAddress	read-write
INT defaultMgmt	1.3.6.1.4.1.890.1.5.8.13.14.2	INTEGER	read-write
IP defaultGateway	1.3.6.1.4.1.890.1.5.8.13.14.3	IpAddress	read-write
outOfBandIpSetup	1.3.6.1.4.1.890.1.5.8.13.14.4
IP outOfBandIp	1.3.6.1.4.1.890.1.5.8.13.14.4.1	IpAddress	read-write
IP outOfBandSubnetMask	1.3.6.1.4.1.890.1.5.8.13.14.4.2	IpAddress	read-write
IP outOfBandGateway	1.3.6.1.4.1.890.1.5.8.13.14.4.3	IpAddress	read-write
INT maxNumOfInbandIp	1.3.6.1.4.1.890.1.5.8.13.14.5	INTEGER	read-only
inbandIpTable	1.3.6.1.4.1.890.1.5.8.13.14.6		not-accessible
inbandIpEntry	1.3.6.1.4.1.890.1.5.8.13.14.6.1		not-accessible	An entry in inbandIpTable.
IP inbandEntryIp	1.3.6.1.4.1.890.1.5.8.13.14.6.1.1	IpAddress	read-write
IP inbandEntrySubnetMask	1.3.6.1.4.1.890.1.5.8.13.14.6.1.2	IpAddress	read-write
INT inbandEntryVid	1.3.6.1.4.1.890.1.5.8.13.14.6.1.3	INTEGER	read-write
ROW inbandEntryRowStatus	1.3.6.1.4.1.890.1.5.8.13.14.6.1.4	RowStatus	read-create
filterSetup	1.3.6.1.4.1.890.1.5.8.13.15
filterTable	1.3.6.1.4.1.890.1.5.8.13.15.1		not-accessible
filterEntry	1.3.6.1.4.1.890.1.5.8.13.15.1.1		not-accessible	An entry in filterTable.
STR filterName	1.3.6.1.4.1.890.1.5.8.13.15.1.1.1	DisplayString	read-write
INT filterActionState	1.3.6.1.4.1.890.1.5.8.13.15.1.1.2	INTEGER	read-write
MAC filterMacAddr	1.3.6.1.4.1.890.1.5.8.13.15.1.1.3	MacAddress	read-only
INT filterVid	1.3.6.1.4.1.890.1.5.8.13.15.1.1.4	INTEGER	read-only
ROW filterRowStatus	1.3.6.1.4.1.890.1.5.8.13.15.1.1.5	RowStatus	read-create
mirrorSetup	1.3.6.1.4.1.890.1.5.8.13.16
ENA mirrorState	1.3.6.1.4.1.890.1.5.8.13.16.1	EnabledStatus	read-write
INT mirrorMonitorPort	1.3.6.1.4.1.890.1.5.8.13.16.2	INTEGER	read-write
mirrorTable	1.3.6.1.4.1.890.1.5.8.13.16.3		not-accessible
mirrorEntry	1.3.6.1.4.1.890.1.5.8.13.16.3.1		not-accessible	An entry in mirrorTable.
ENA mirrorMirroredState	1.3.6.1.4.1.890.1.5.8.13.16.3.1.1	EnabledStatus	read-write
INT mirrorDirection	1.3.6.1.4.1.890.1.5.8.13.16.3.1.2	INTEGER	read-write
aggrSetup	1.3.6.1.4.1.890.1.5.8.13.17
ENA aggrState	1.3.6.1.4.1.890.1.5.8.13.17.1	EnabledStatus	read-write
INT aggrSystemPriority	1.3.6.1.4.1.890.1.5.8.13.17.2	INTEGER	read-write
aggrGroupTable	1.3.6.1.4.1.890.1.5.8.13.17.3		not-accessible
aggrGroupEntry	1.3.6.1.4.1.890.1.5.8.13.17.3.1		not-accessible	An entry in aggrGroupTable.
INT aggrGroupIndex	1.3.6.1.4.1.890.1.5.8.13.17.3.1.1	INTEGER	read-only
ENA aggrGroupState	1.3.6.1.4.1.890.1.5.8.13.17.3.1.2	EnabledStatus	read-write
ENA aggrGroupDynamicState	1.3.6.1.4.1.890.1.5.8.13.17.3.1.3	EnabledStatus	read-write
aggrPortTable	1.3.6.1.4.1.890.1.5.8.13.17.4		not-accessible
aggrPortEntry	1.3.6.1.4.1.890.1.5.8.13.17.4.1		not-accessible	An entry in aggrPortTable.
INT aggrPortGroup	1.3.6.1.4.1.890.1.5.8.13.17.4.1.1	INTEGER	read-write
INT aggrPortDynamicStateTimeout	1.3.6.1.4.1.890.1.5.8.13.17.4.1.2	INTEGER	read-write
accessCtlSetup	1.3.6.1.4.1.890.1.5.8.13.18
accessCtlTable	1.3.6.1.4.1.890.1.5.8.13.18.1		not-accessible
accessCtlEntry	1.3.6.1.4.1.890.1.5.8.13.18.1.1		not-accessible	An entry in accessCtlTable.
INT accessCtlService	1.3.6.1.4.1.890.1.5.8.13.18.1.1.1	INTEGER	read-only
ENA accessCtlEnable	1.3.6.1.4.1.890.1.5.8.13.18.1.1.2	EnabledStatus	read-write
INT accessCtlServicePort	1.3.6.1.4.1.890.1.5.8.13.18.1.1.3	INTEGER	read-write
INT accessCtlTimeout	1.3.6.1.4.1.890.1.5.8.13.18.1.1.4	INTEGER	read-write
securedClientTable	1.3.6.1.4.1.890.1.5.8.13.18.2		not-accessible
securedClientEntry	1.3.6.1.4.1.890.1.5.8.13.18.2.1		not-accessible	An entry in securedClientTable.
INT securedClientIndex	1.3.6.1.4.1.890.1.5.8.13.18.2.1.1	INTEGER	read-only
ENA securedClientEnable	1.3.6.1.4.1.890.1.5.8.13.18.2.1.2	EnabledStatus	read-write
IP securedClientStartIp	1.3.6.1.4.1.890.1.5.8.13.18.2.1.3	IpAddress	read-write
IP securedClientEndIp	1.3.6.1.4.1.890.1.5.8.13.18.2.1.4	IpAddress	read-write
BIT securedClientService	1.3.6.1.4.1.890.1.5.8.13.18.2.1.5	Bits	read-write
queuingMethodSetup	1.3.6.1.4.1.890.1.5.8.13.19
portQueuingMethodTable	1.3.6.1.4.1.890.1.5.8.13.19.1		not-accessible
portQueuingMethodEntry	1.3.6.1.4.1.890.1.5.8.13.19.1.1		not-accessible	An entry in portQueuingMethodTable.
INT portQueuingMethodQueue	1.3.6.1.4.1.890.1.5.8.13.19.1.1.1	INTEGER	read-only	0...7
INT portQueuingMethodWeight	1.3.6.1.4.1.890.1.5.8.13.19.1.1.2	INTEGER	read-write	0...15
INT portQueuingMethodMode	1.3.6.1.4.1.890.1.5.8.13.19.1.1.3	INTEGER	read-write
dhcpSetup	1.3.6.1.4.1.890.1.5.8.13.20
dhcpRelay	1.3.6.1.4.1.890.1.5.8.13.20.1
ENA dhcpRelayEnable	1.3.6.1.4.1.890.1.5.8.13.20.1.1	EnabledStatus	read-write
ENA dhcpRelayOption82Enable	1.3.6.1.4.1.890.1.5.8.13.20.1.2	EnabledStatus	read-write
ENA dhcpRelayInfoEnable	1.3.6.1.4.1.890.1.5.8.13.20.1.3	EnabledStatus	read-write
STR dhcpRelayInfoData	1.3.6.1.4.1.890.1.5.8.13.20.1.4	DisplayString	read-only
INT maxNumberOfDhcpRemoteServer	1.3.6.1.4.1.890.1.5.8.13.20.1.5	INTEGER	read-only
dhcpRemoteServerTable	1.3.6.1.4.1.890.1.5.8.13.20.1.6		not-accessible
dhcpRemoteServerEntry	1.3.6.1.4.1.890.1.5.8.13.20.1.6.1		not-accessible	An entry in dhcpRemoteServerTable.
IP dhcpRemoteServerIp	1.3.6.1.4.1.890.1.5.8.13.20.1.6.1.1	IpAddress	read-only
ROW dhcpRemoteServerRowStatus	1.3.6.1.4.1.890.1.5.8.13.20.1.6.1.2	RowStatus	read-create
dhcpServer	1.3.6.1.4.1.890.1.5.8.13.20.2
INT maxNumberOfDhcpServers	1.3.6.1.4.1.890.1.5.8.13.20.2.1	INTEGER	read-only
dhcpServerTable	1.3.6.1.4.1.890.1.5.8.13.20.2.2		not-accessible
dhcpServerEntry	1.3.6.1.4.1.890.1.5.8.13.20.2.2.1		not-accessible	An entry in dhcpServerTable.
INT dhcpServerVid	1.3.6.1.4.1.890.1.5.8.13.20.2.2.1.1	INTEGER	read-only
IP dhcpServerStartAddr	1.3.6.1.4.1.890.1.5.8.13.20.2.2.1.2	IpAddress	read-create
INT dhcpServerPoolSize	1.3.6.1.4.1.890.1.5.8.13.20.2.2.1.3	INTEGER	read-create
IP dhcpServerMask	1.3.6.1.4.1.890.1.5.8.13.20.2.2.1.4	IpAddress	read-create
IP dhcpServerGateway	1.3.6.1.4.1.890.1.5.8.13.20.2.2.1.5	IpAddress	read-create
IP dhcpServerPrimaryDNS	1.3.6.1.4.1.890.1.5.8.13.20.2.2.1.6	IpAddress	read-create
IP dhcpServerSecondaryDNS	1.3.6.1.4.1.890.1.5.8.13.20.2.2.1.7	IpAddress	read-create
ROW dhcpServerRowStatus	1.3.6.1.4.1.890.1.5.8.13.20.2.2.1.8	RowStatus	read-create
staticRouteSetup	1.3.6.1.4.1.890.1.5.8.13.21
INT maxNumberOfStaticRoutes	1.3.6.1.4.1.890.1.5.8.13.21.1	INTEGER	read-only
staticRouteTable	1.3.6.1.4.1.890.1.5.8.13.21.2		not-accessible
staticRouteEntry	1.3.6.1.4.1.890.1.5.8.13.21.2.1		not-accessible	An entry in staticRouteTable.
STR staticRouteName	1.3.6.1.4.1.890.1.5.8.13.21.2.1.1	DisplayString	read-write
IP staticRouteIp	1.3.6.1.4.1.890.1.5.8.13.21.2.1.2	IpAddress	read-only
IP staticRouteMask	1.3.6.1.4.1.890.1.5.8.13.21.2.1.3	IpAddress	read-only
IP staticRouteGateway	1.3.6.1.4.1.890.1.5.8.13.21.2.1.4	IpAddress	read-write
INT staticRouteMetric	1.3.6.1.4.1.890.1.5.8.13.21.2.1.5	INTEGER	read-write
ROW staticRouteRowStatus	1.3.6.1.4.1.890.1.5.8.13.21.2.1.6	RowStatus	read-create
arpInfo	1.3.6.1.4.1.890.1.5.8.13.22
arpTable	1.3.6.1.4.1.890.1.5.8.13.22.1		not-accessible
arpEntry	1.3.6.1.4.1.890.1.5.8.13.22.1.1		not-accessible	An entry in arpTable.
INT arpIndex	1.3.6.1.4.1.890.1.5.8.13.22.1.1.1	INTEGER	read-only
IP arpIpAddr	1.3.6.1.4.1.890.1.5.8.13.22.1.1.2	IpAddress	read-only
MAC arpMacAddr	1.3.6.1.4.1.890.1.5.8.13.22.1.1.3	MacAddress	read-only
INT arpMacVid	1.3.6.1.4.1.890.1.5.8.13.22.1.1.4	INTEGER	read-only
INT arpType	1.3.6.1.4.1.890.1.5.8.13.22.1.1.5	INTEGER	read-only	1-static, 2-dynamic
portOpModeSetup	1.3.6.1.4.1.890.1.5.8.13.23
portOpModePortTable	1.3.6.1.4.1.890.1.5.8.13.23.1		not-accessible
portOpModePortEntry	1.3.6.1.4.1.890.1.5.8.13.23.1.1		not-accessible	An entry in portOpModePortTable.
INT portOpModePortSpeedDuplex	1.3.6.1.4.1.890.1.5.8.13.23.1.1.1	INTEGER	read-write
INT portOpModePortFlowCntl	1.3.6.1.4.1.890.1.5.8.13.23.1.1.2	INTEGER	read-write
OCT portOpModePortName	1.3.6.1.4.1.890.1.5.8.13.23.1.1.3	OCTET STRING	read-write
INT portOpModePortModuleType	1.3.6.1.4.1.890.1.5.8.13.23.1.1.4	INTEGER	read-only
INT portOpModePortLinkUpType	1.3.6.1.4.1.890.1.5.8.13.23.1.1.5	INTEGER	read-only
ENA portOpModePortIntrusionLock	1.3.6.1.4.1.890.1.5.8.13.23.1.1.6	EnabledStatus	read-write
INT portOpModePortLBTestStatus	1.3.6.1.4.1.890.1.5.8.13.23.1.1.7	INTEGER	read-only	This entry display latest loopback test status of port while performing loopback test.
portBasedVlanSetup	1.3.6.1.4.1.890.1.5.8.13.24
portBasedVlanPortListTable	1.3.6.1.4.1.890.1.5.8.13.24.1		not-accessible
portBasedVlanPortListEntry	1.3.6.1.4.1.890.1.5.8.13.24.1.1		not-accessible	An entry in portBasedVlanPortListTable.
POR portBasedVlanPortListMembers	1.3.6.1.4.1.890.1.5.8.13.24.1.1.1	PortList	read-write
multicastPortSetup	1.3.6.1.4.1.890.1.5.8.13.25
multicastPortTable	1.3.6.1.4.1.890.1.5.8.13.25.1		not-accessible
multicastPortEntry	1.3.6.1.4.1.890.1.5.8.13.25.1.1		not-accessible	An entry in multicastPortTable.
ENA multicastPortImmediateLeave	1.3.6.1.4.1.890.1.5.8.13.25.1.1.1	EnabledStatus	read-write
ENA multicastPortMaxGroupLimited	1.3.6.1.4.1.890.1.5.8.13.25.1.1.2	EnabledStatus	read-write
INT multicastPortMaxOfGroup	1.3.6.1.4.1.890.1.5.8.13.25.1.1.3	INTEGER	read-write	0..255
STR multicastPortIgmpFilteringProfile	1.3.6.1.4.1.890.1.5.8.13.25.1.1.4	DisplayString	read-write
multicastStatus	1.3.6.1.4.1.890.1.5.8.13.26
multicastStatusTable	1.3.6.1.4.1.890.1.5.8.13.26.1		not-accessible
multicastStatusEntry	1.3.6.1.4.1.890.1.5.8.13.26.1.1		not-accessible	An entry in multicastStatusTable.
INT multicastStatusIndex	1.3.6.1.4.1.890.1.5.8.13.26.1.1.1	INTEGER	read-only
INT multicastStatusVlanID	1.3.6.1.4.1.890.1.5.8.13.26.1.1.2	INTEGER	read-only
INT multicastStatusPort	1.3.6.1.4.1.890.1.5.8.13.26.1.1.3	INTEGER	read-only
IP multicastStatusGroup	1.3.6.1.4.1.890.1.5.8.13.26.1.1.4	IpAddress	read-only
igmpFilteringProfileSetup	1.3.6.1.4.1.890.1.5.8.13.27
INT igmpFilteringMaxNumberOfProfile	1.3.6.1.4.1.890.1.5.8.13.27.1	INTEGER	read-only
igmpFilteringProfileTable	1.3.6.1.4.1.890.1.5.8.13.27.2		not-accessible
igmpFilteringProfileEntry	1.3.6.1.4.1.890.1.5.8.13.27.2.1		not-accessible	An entry in igmpFilteringProfileTable.
STR igmpFilteringProfileName	1.3.6.1.4.1.890.1.5.8.13.27.2.1.1	DisplayString	read-only
IP igmpFilteringProfileStartAddress	1.3.6.1.4.1.890.1.5.8.13.27.2.1.2	IpAddress	read-only
IP igmpFilteringProfileEndAddress	1.3.6.1.4.1.890.1.5.8.13.27.2.1.3	IpAddress	read-only
ROW igmpFilteringProfileRowStatus	1.3.6.1.4.1.890.1.5.8.13.27.2.1.4	RowStatus	read-create
mvrSetup	1.3.6.1.4.1.890.1.5.8.13.28
INT maxNumberOfMVR	1.3.6.1.4.1.890.1.5.8.13.28.1	INTEGER	read-only
mvrTable	1.3.6.1.4.1.890.1.5.8.13.28.2		not-accessible
mvrEntry	1.3.6.1.4.1.890.1.5.8.13.28.2.1		not-accessible	An entry in mvrTable.
INT mvrVlanID	1.3.6.1.4.1.890.1.5.8.13.28.2.1.1	INTEGER	read-only	1..4094
STR mvrName	1.3.6.1.4.1.890.1.5.8.13.28.2.1.2	DisplayString	read-write
INT mvrMode	1.3.6.1.4.1.890.1.5.8.13.28.2.1.3	INTEGER	read-write
ROW mvrRowStatus	1.3.6.1.4.1.890.1.5.8.13.28.2.1.4	RowStatus	read-create
mvrPortTable	1.3.6.1.4.1.890.1.5.8.13.28.3		not-accessible
mvrPortEntry	1.3.6.1.4.1.890.1.5.8.13.28.3.1		not-accessible	An entry in mvrPortTable.
INT mvrPortRole	1.3.6.1.4.1.890.1.5.8.13.28.3.1.1	INTEGER	read-write
ENA mvrPortTagging	1.3.6.1.4.1.890.1.5.8.13.28.3.1.2	EnabledStatus	read-write
INT maxNumberOfMvrGroup	1.3.6.1.4.1.890.1.5.8.13.28.4	INTEGER	read-only
mvrGroupTable	1.3.6.1.4.1.890.1.5.8.13.28.5		not-accessible
mvrGroupEntry	1.3.6.1.4.1.890.1.5.8.13.28.5.1		not-accessible	An entry in mvrGroupTable.
STR mvrGroupName	1.3.6.1.4.1.890.1.5.8.13.28.5.1.1	DisplayString	read-only
IP mvrGroupStartAddress	1.3.6.1.4.1.890.1.5.8.13.28.5.1.2	IpAddress	read-write
IP mvrGroupEndAddress	1.3.6.1.4.1.890.1.5.8.13.28.5.1.3	IpAddress	read-write
ROW mvrGroupRowStatus	1.3.6.1.4.1.890.1.5.8.13.28.5.1.4	RowStatus	read-create
layer3Setup	1.3.6.1.4.1.890.1.5.8.13.29
ENA routerRipState	1.3.6.1.4.1.890.1.5.8.13.29.1	EnabledStatus	read-write
ENA routerIgmpState	1.3.6.1.4.1.890.1.5.8.13.29.2	EnabledStatus	read-write
ENA routerDvmrpState	1.3.6.1.4.1.890.1.5.8.13.29.3	EnabledStatus	read-write
INT routerDvmrpThreshold	1.3.6.1.4.1.890.1.5.8.13.29.4	INTEGER	read-write
routerIpmcPortSetup	1.3.6.1.4.1.890.1.5.8.13.30
routerIpmcPortTable	1.3.6.1.4.1.890.1.5.8.13.30.1		not-accessible
routerIpmcPortEntry	1.3.6.1.4.1.890.1.5.8.13.30.1.1		not-accessible	An entry in routerIpmcPortTable.
INT routerIpmcPortEgressUntagVlan	1.3.6.1.4.1.890.1.5.8.13.30.1.1.1	INTEGER	read-write
routerVrrpSetup	1.3.6.1.4.1.890.1.5.8.13.31
INT routerVrrpMaxNumber	1.3.6.1.4.1.890.1.5.8.13.31.1	INTEGER	read-only	Always set it as 14.
routerVrrpTable	1.3.6.1.4.1.890.1.5.8.13.31.2		not-accessible
routerVrrpEntry	1.3.6.1.4.1.890.1.5.8.13.31.2.1		not-accessible	An entry in routerVrrpTable.
INT routerVrrpVirtualID	1.3.6.1.4.1.890.1.5.8.13.31.2.1.1	INTEGER	read-only
IP routerVrrpUplinkGateway	1.3.6.1.4.1.890.1.5.8.13.31.2.1.2	IpAddress	read-only
ENA routerVrrpPreempt	1.3.6.1.4.1.890.1.5.8.13.31.2.1.3	EnabledStatus	read-write
INT routerVrrpInterval	1.3.6.1.4.1.890.1.5.8.13.31.2.1.4	INTEGER	read-write	1-255
INT routerVrrpPriority	1.3.6.1.4.1.890.1.5.8.13.31.2.1.5	INTEGER	read-write	1-254
IP routerVrrpPrimaryVirtualIP	1.3.6.1.4.1.890.1.5.8.13.31.2.1.6	IpAddress	read-write
STR routerVrrpName	1.3.6.1.4.1.890.1.5.8.13.31.2.1.7	DisplayString	read-write
IP routerVrrpSecondaryVirtualIP	1.3.6.1.4.1.890.1.5.8.13.31.2.1.8	IpAddress	read-write
ROW rpVrrpRowStatus	1.3.6.1.4.1.890.1.5.8.13.31.2.1.9	RowStatus	read-create
routerVrrpDomainTable	1.3.6.1.4.1.890.1.5.8.13.31.3		not-accessible
routerVrrpDomainEntry	1.3.6.1.4.1.890.1.5.8.13.31.3.1		not-accessible	An entry in routerVrrpTable.
INT routerVrrpAuthType	1.3.6.1.4.1.890.1.5.8.13.31.3.1.1	INTEGER	read-write
STR routerVrrpAuthKey	1.3.6.1.4.1.890.1.5.8.13.31.3.1.2	DisplayString	read-write
routerVrrpStatus	1.3.6.1.4.1.890.1.5.8.13.32
routerVrrpStatusTable	1.3.6.1.4.1.890.1.5.8.13.32.1		not-accessible
routerVrrpStatusEntry	1.3.6.1.4.1.890.1.5.8.13.32.1.1		not-accessible
IP routerVrrpStatusIpAddress	1.3.6.1.4.1.890.1.5.8.13.32.1.1.1	IpAddress	read-only
INT routerVrrpStatusIpMaskBits	1.3.6.1.4.1.890.1.5.8.13.32.1.1.2	INTEGER	read-only
INT routerVrrpStatusVirtualID	1.3.6.1.4.1.890.1.5.8.13.32.1.1.3	INTEGER	read-only
STR routerVrrpStatusVRStatus	1.3.6.1.4.1.890.1.5.8.13.32.1.1.4	DisplayString	read-only
STR routerVrrpStatusUpLinkStatus	1.3.6.1.4.1.890.1.5.8.13.32.1.1.5	DisplayString	read-only
routerDomainSetup	1.3.6.1.4.1.890.1.5.8.13.33
routerDomainTable	1.3.6.1.4.1.890.1.5.8.13.33.1		not-accessible
routerDomainEntry	1.3.6.1.4.1.890.1.5.8.13.33.1.1		not-accessible	An entry in routerDomainTable.
IP routerDomainIpAddress	1.3.6.1.4.1.890.1.5.8.13.33.1.1.1	IpAddress	read-only
INT routerDomainIpMaskBits	1.3.6.1.4.1.890.1.5.8.13.33.1.1.2	INTEGER	read-only
INT routerDomainVid	1.3.6.1.4.1.890.1.5.8.13.33.1.1.3	INTEGER	read-only
routerDomainIpTable	1.3.6.1.4.1.890.1.5.8.13.33.2		not-accessible
routerDomainIpEntry	1.3.6.1.4.1.890.1.5.8.13.33.2.1		not-accessible	An entry in routerDomainIpTable.
INT routerDomainIpRipDirection	1.3.6.1.4.1.890.1.5.8.13.33.2.1.1	INTEGER	read-write
INT routerDomainIpRipVersion	1.3.6.1.4.1.890.1.5.8.13.33.2.1.2	INTEGER	read-write
INT routerDomainIpIgmpVersion	1.3.6.1.4.1.890.1.5.8.13.33.2.1.3	INTEGER	read-write
ENA routerDomainIpDvmrp	1.3.6.1.4.1.890.1.5.8.13.33.2.1.4	EnabledStatus	read-write
diffservSetup	1.3.6.1.4.1.890.1.5.8.13.34
ENA diffservState	1.3.6.1.4.1.890.1.5.8.13.34.1	EnabledStatus	read-write
diffservMapTable	1.3.6.1.4.1.890.1.5.8.13.34.2		not-accessible
diffservMapEntry	1.3.6.1.4.1.890.1.5.8.13.34.2.1		not-accessible	An entry in diffservMapTable.
INT diffservMapDscp	1.3.6.1.4.1.890.1.5.8.13.34.2.1.1	INTEGER	read-only	0-63
INT diffservMapPriority	1.3.6.1.4.1.890.1.5.8.13.34.2.1.2	INTEGER	read-write	0-7
diffservPortTable	1.3.6.1.4.1.890.1.5.8.13.34.3		not-accessible
diffservPortEntry	1.3.6.1.4.1.890.1.5.8.13.34.3.1		not-accessible	An entry in diffservPortTable.
ENA diffservPortState	1.3.6.1.4.1.890.1.5.8.13.34.3.1.1	EnabledStatus	read-write
clusterSetup	1.3.6.1.4.1.890.1.5.8.13.35
clusterManager	1.3.6.1.4.1.890.1.5.8.13.35.1
INT clusterMaxNumOfManager	1.3.6.1.4.1.890.1.5.8.13.35.1.1	INTEGER	read-only
clusterManagerTable	1.3.6.1.4.1.890.1.5.8.13.35.1.2		not-accessible
clusterManagerEntry	1.3.6.1.4.1.890.1.5.8.13.35.1.2.1		not-accessible	An entry in clusterManagerTable.
INT clusterManagerVid	1.3.6.1.4.1.890.1.5.8.13.35.1.2.1.1	INTEGER	read-only
STR clusterManagerName	1.3.6.1.4.1.890.1.5.8.13.35.1.2.1.2	DisplayString	read-write
ROW clusterManagerRowStatus	1.3.6.1.4.1.890.1.5.8.13.35.1.2.1.3	RowStatus	read-create
clusterMembers	1.3.6.1.4.1.890.1.5.8.13.35.2
INT clusterMaxNumOfMember	1.3.6.1.4.1.890.1.5.8.13.35.2.1	INTEGER	read-only
clusterMemberTable	1.3.6.1.4.1.890.1.5.8.13.35.2.2		not-accessible
clusterMemberEntry	1.3.6.1.4.1.890.1.5.8.13.35.2.2.1		not-accessible	An entry in clusterMemberTable.
STR clusterMemberMac	1.3.6.1.4.1.890.1.5.8.13.35.2.2.1.1	DisplayString	read-only
STR clusterMemberName	1.3.6.1.4.1.890.1.5.8.13.35.2.2.1.2	DisplayString	read-only
STR clusterMemberModel	1.3.6.1.4.1.890.1.5.8.13.35.2.2.1.3	DisplayString	read-only
STR clusterMemberPassword	1.3.6.1.4.1.890.1.5.8.13.35.2.2.1.4	DisplayString	not-accessible
ROW clusterMemberRowStatus	1.3.6.1.4.1.890.1.5.8.13.35.2.2.1.5	RowStatus	read-create
clusterCandidates	1.3.6.1.4.1.890.1.5.8.13.35.3
clusterCandidateTable	1.3.6.1.4.1.890.1.5.8.13.35.3.1		not-accessible
clusterCandidateEntry	1.3.6.1.4.1.890.1.5.8.13.35.3.1.1		not-accessible	An entry in clusterCandidateTable.
STR clusterCandidateMac	1.3.6.1.4.1.890.1.5.8.13.35.3.1.1.1	DisplayString	read-only
STR clusterCandidateName	1.3.6.1.4.1.890.1.5.8.13.35.3.1.1.2	DisplayString	read-only
STR clusterCandidateModel	1.3.6.1.4.1.890.1.5.8.13.35.3.1.1.3	DisplayString	read-only
clusterStatus	1.3.6.1.4.1.890.1.5.8.13.35.4
INT clusterStatusRole	1.3.6.1.4.1.890.1.5.8.13.35.4.1	INTEGER	read-only
STR clusterStatusManager	1.3.6.1.4.1.890.1.5.8.13.35.4.2	DisplayString	read-only
INT clsuterStatusMaxNumOfMember	1.3.6.1.4.1.890.1.5.8.13.35.4.3	INTEGER	read-only
clusterStatusMemberTable	1.3.6.1.4.1.890.1.5.8.13.35.4.4		not-accessible
clusterStatusMemberEntry	1.3.6.1.4.1.890.1.5.8.13.35.4.4.1		not-accessible	An entry in clusterStatusMemberTable.
STR clusterStatusMemberMac	1.3.6.1.4.1.890.1.5.8.13.35.4.4.1.1	DisplayString	read-only
STR clusterStatusMemberName	1.3.6.1.4.1.890.1.5.8.13.35.4.4.1.2	DisplayString	read-only
STR clusterStatusMemberModel	1.3.6.1.4.1.890.1.5.8.13.35.4.4.1.3	DisplayString	read-only
INT clusterStatusMemberStatus	1.3.6.1.4.1.890.1.5.8.13.35.4.4.1.4	INTEGER	read-only
faultMIB	1.3.6.1.4.1.890.1.5.8.13.36			Fault event table definitions
eventObjects	1.3.6.1.4.1.890.1.5.8.13.36.1
eventTable	1.3.6.1.4.1.890.1.5.8.13.36.1.1		not-accessible	A list of currently active fault events. All faults of normal type regardless of their severity level are recorded in the event table. When a normal type fault is cleared it is deleted from the event table.
eventEntry	1.3.6.1.4.1.890.1.5.8.13.36.1.1.1		not-accessible	An entry containing information about an event in the event table.
I32 eventSeqNum	1.3.6.1.4.1.890.1.5.8.13.36.1.1.1.1	Integer32	read-only	This variable represents the sequence number of an event. Sequence number is incremented monotonically starting from 0 until it reaches its maximum and wraps around back to 0. Sequence number is incremented when - the state of a normal type fault is set on (the same sequence number is present in the events table as well as in the trap that is sent to notify about the fault on event) - delta event occurs (sequence number present in trap message) - the state of a normal type fault is set off (sequence number present in trap that is sent to notify for clearing).
EVE eventEventId	1.3.6.1.4.1.890.1.5.8.13.36.1.1.1.2	EventIdNumber	read-only	This variable represents the event ID which uniquely identifies the event in the entire system.
STR eventName	1.3.6.1.4.1.890.1.5.8.13.36.1.1.1.3	DisplayString	read-only	This variable represents the name of the event, for example 'Ethernet Link Down'
INS eventInstanceType	1.3.6.1.4.1.890.1.5.8.13.36.1.1.1.4	InstanceType	read-only	This variable represents the type of InstanceId of a particular event in the event table. In brief the instanceType refers to the type of sub-component generating this event in the system, for example switch (5). For more details see the textual conventions section. AFFECTS: eventInstanceId, eventInstanceName
STR eventInstanceId	1.3.6.1.4.1.890.1.5.8.13.36.1.1.1.5	DisplayString	read-only	This variable represents the InstanceId of a particular event in the event current table. In brief the instanceId refers to the sub-component generating this event in the system, for example '1' for port 1. For more details see the textual conventions section. DEPENDS ON: eventInstanceType
STR eventInstanceName	1.3.6.1.4.1.890.1.5.8.13.36.1.1.1.6	DisplayString	read-only	This variable is mainly used to store additional information about the sub-component that is generating an event. For example this field may specify what cooling fan is faulty. DEPENDS ON: eventInstanceType
EVE eventSeverity	1.3.6.1.4.1.890.1.5.8.13.36.1.1.1.7	EventSeverity	read-only	This variable dictates the urgency of action when a event occurs. There are four severity levels - Critical, Major, Minor, and Informational. Critical events are those, which require immediate operator intervention to prevent/reduce system down time. Major events require quick attention and Minor events possibly require some attention. Informational events indicate the occurrence of events that may need to be investigated.
UTC eventSetTime	1.3.6.1.4.1.890.1.5.8.13.36.1.1.1.8	UtcTimeStamp	read-only	This table contains only normal events and this variable represents the time when the event become active, i.e. the number of seconds since Jan 1, 1970 12:00AM.
STR eventDescription	1.3.6.1.4.1.890.1.5.8.13.36.1.1.1.9	DisplayString	read-only	This variable contains a description of the event and reasons behind the event. This is a free format alpha-numeric string that is set by the entity generating this event. This variable may be empty if there is no usefull information to report. The maximum length of this string is 255 characters.
EVE eventServAffective	1.3.6.1.4.1.890.1.5.8.13.36.1.1.1.10	EventServiceAffective	read-only	This variable indicates whether the event is service affective or not
faultTrapsMIB	1.3.6.1.4.1.890.1.5.8.13.37			Fault event trap definitions
trapInfoObjects	1.3.6.1.4.1.890.1.5.8.13.37.1
I32 trapRefSeqNum	1.3.6.1.4.1.890.1.5.8.13.37.1.1	Integer32	read-only	Indicates the former sequence number of a cleared event in the event table. Not intended to read but only used in trap notifications.
EVE trapPersistence	1.3.6.1.4.1.890.1.5.8.13.37.1.2	EventPersistence	read-only	Indicates whether the event is delta (automatically and immediately cleared) or normal (not automatically cleared). Not intended to read but only used in trap notifications.
I32 trapSenderNodeId	1.3.6.1.4.1.890.1.5.8.13.37.1.3	Integer32	read-only	Represents the node ID of the sending network element. If not supported should be set to 0. Not intended to read but only used in trap notifications.
trapNotifications	1.3.6.1.4.1.890.1.5.8.13.37.2
NTF eventOnTrap	1.3.6.1.4.1.890.1.5.8.13.37.2.1			This trap is used to inform network management system that a delta fault event (events that are automatically cleared) has occured or a normal fault event (not automatically cleared) state has been set on. Objects are used as follows: - eventSeqNum is the sequence number of the event. For normal type of events must equal to the sequence number of the event in the events table. - eventEventId specifies what fault event has occured. - eventName specifies the name of the fault event. - eventSetTime indicates when fault event has occured (delta events) or when fault has been set on (normal events). - eventSeverity reports the severity level of the event. - eventInstanceType indicates what kind of object is faulty. - eventInstanceId specifies what instance is faulty. - eventInstanceName may contain textual description for the faulty object. - eventServAffective specifies whether the event is immediately service affcetive. - eventDescription reports possible additional information about the event. - trapPersistence tells whether this event is a delta or normal event. - trapSenderNodeId specifies the node ID of the sending network element if configuring it is supported for the network element, otherwise 0. - sysObjectID specifies what kind of equipment reports the fault event. For more information see the eventTable specification
NTF eventClearedTrap	1.3.6.1.4.1.890.1.5.8.13.37.2.2			This trap is used to inform network management system that a normal type fault event has been cleared (state set off). Objects are used as follows: - eventSeqNum is the sequence number of the this clearing event. Note that the sequence number of the cleared event is reported in the trapRefSeqNum object. - eventEventId specifies what event has been cleared. - eventSetTime indicates when fault event has been cleared. - eventInstanceType indicates what kind of object has been faulty. - eventInstanceId specifies what instance has been faulty. - trapRefSeqNum specifies the sequence number of the cleared event (i.e. the sequence number was assigned for the event in the events table). - trapSenderNodeId specifies the node ID of the sending network element if configuring it is supported for the network element, otherwise 0. - sysObjectID specifies what kind of equipment reports the clearing event. For more information see the eventTable specification
ipStatus	1.3.6.1.4.1.890.1.5.8.13.38
ipStatusTable	1.3.6.1.4.1.890.1.5.8.13.38.1		not-accessible
ipStatusEntry	1.3.6.1.4.1.890.1.5.8.13.38.1.1		not-accessible
IP ipStatusIPAddress	1.3.6.1.4.1.890.1.5.8.13.38.1.1.1	IpAddress	read-only
INT ipStatusVid	1.3.6.1.4.1.890.1.5.8.13.38.1.1.2	INTEGER	read-only
STR ipStatusPort	1.3.6.1.4.1.890.1.5.8.13.38.1.1.3	DisplayString	read-only
INT ipStatusType	1.3.6.1.4.1.890.1.5.8.13.38.1.1.4	INTEGER	read-only
routingStatus	1.3.6.1.4.1.890.1.5.8.13.39
routingStatusTable	1.3.6.1.4.1.890.1.5.8.13.39.1		not-accessible
routingStatusEntry	1.3.6.1.4.1.890.1.5.8.13.39.1.1		not-accessible
IP routingStatusDestAddress	1.3.6.1.4.1.890.1.5.8.13.39.1.1.1	IpAddress	read-only
INT routingStatusDestMaskbits	1.3.6.1.4.1.890.1.5.8.13.39.1.1.2	INTEGER	read-only
IP routingStatusGateway	1.3.6.1.4.1.890.1.5.8.13.39.1.1.3	IpAddress	read-only
IP routingStatusInterface	1.3.6.1.4.1.890.1.5.8.13.39.1.1.4	IpAddress	read-only
INT routingStatusMetric	1.3.6.1.4.1.890.1.5.8.13.39.1.1.5	INTEGER	read-only
INT routingStatusType	1.3.6.1.4.1.890.1.5.8.13.39.1.1.6	INTEGER	read-only
ospfExt	1.3.6.1.4.1.890.1.5.8.13.40
ospfInterfaceTable	1.3.6.1.4.1.890.1.5.8.13.40.1		not-accessible
ospfInterfaceEntry	1.3.6.1.4.1.890.1.5.8.13.40.1.1		not-accessible
INT ospfIfKeyId	1.3.6.1.4.1.890.1.5.8.13.40.1.1.1	INTEGER	read-write
INT ospfIfMaskbits	1.3.6.1.4.1.890.1.5.8.13.40.1.1.2	INTEGER	read-only
IP ospfIfDesignatedRouterID	1.3.6.1.4.1.890.1.5.8.13.40.1.1.3	IpAddress	read-only
IP ospfIfBackupDesignatedRouterID	1.3.6.1.4.1.890.1.5.8.13.40.1.1.4	IpAddress	read-only
INT ospfIfNbrCount	1.3.6.1.4.1.890.1.5.8.13.40.1.1.5	INTEGER	read-only
INT ospfIfAdjacentNbrCount	1.3.6.1.4.1.890.1.5.8.13.40.1.1.6	INTEGER	read-only
STR ospfIfHelloDueTime	1.3.6.1.4.1.890.1.5.8.13.40.1.1.7	DisplayString	read-only
ospfAreaExtTable	1.3.6.1.4.1.890.1.5.8.13.40.2		not-accessible
ospfAreaExtEntry	1.3.6.1.4.1.890.1.5.8.13.40.2.1		not-accessible
STR ospfAreaExtName	1.3.6.1.4.1.890.1.5.8.13.40.2.1.1	DisplayString	read-write
ospfRedistributeRouteTable	1.3.6.1.4.1.890.1.5.8.13.40.3		not-accessible
ospfRedistributeRouteEntry	1.3.6.1.4.1.890.1.5.8.13.40.3.1		not-accessible
INT ospfRedistributeRouteProtocol	1.3.6.1.4.1.890.1.5.8.13.40.3.1.1	INTEGER	read-only
ENA ospfRedistributeRouteState	1.3.6.1.4.1.890.1.5.8.13.40.3.1.2	EnabledStatus	read-write
INT ospfRedistributeRouteType	1.3.6.1.4.1.890.1.5.8.13.40.3.1.3	INTEGER	read-write
INT ospfRedistributeRouteMetric	1.3.6.1.4.1.890.1.5.8.13.40.3.1.4	INTEGER	read-write
ospfNbrExtTable	1.3.6.1.4.1.890.1.5.8.13.40.4		not-accessible
ospfNbrExtEntry	1.3.6.1.4.1.890.1.5.8.13.40.4.1		not-accessible
INT ospfNbrExtRole	1.3.6.1.4.1.890.1.5.8.13.40.4.1.1	INTEGER	read-only
STR ospfNbrExtDeadtime	1.3.6.1.4.1.890.1.5.8.13.40.4.1.2	DisplayString	read-only
IP ospfNbrExtInterface	1.3.6.1.4.1.890.1.5.8.13.40.4.1.3	IpAddress	read-only
INT ospfNbrExtRXmtL	1.3.6.1.4.1.890.1.5.8.13.40.4.1.4	INTEGER	read-only
INT ospfNbrExtRqstL	1.3.6.1.4.1.890.1.5.8.13.40.4.1.5	INTEGER	read-only
INT ospfNbrExtDBsmL	1.3.6.1.4.1.890.1.5.8.13.40.4.1.6	INTEGER	read-only
ospfLsdbExtTable	1.3.6.1.4.1.890.1.5.8.13.40.5		not-accessible
ospfLsdbExtEntry	1.3.6.1.4.1.890.1.5.8.13.40.5.1		not-accessible
INT ospfLsdbExtLinkCount	1.3.6.1.4.1.890.1.5.8.13.40.5.1.1	INTEGER	read-only
IP ospfLsdbExtRouteAddress	1.3.6.1.4.1.890.1.5.8.13.40.5.1.2	IpAddress	read-only
INT ospfLsdbExtRouteMaskbits	1.3.6.1.4.1.890.1.5.8.13.40.5.1.3	INTEGER	read-only
ospfVirtualLinkTable	1.3.6.1.4.1.890.1.5.8.13.40.6		not-accessible
ospfVirtualLinkEntry	1.3.6.1.4.1.890.1.5.8.13.40.6.1		not-accessible
STR ospfVirtualLinkName	1.3.6.1.4.1.890.1.5.8.13.40.6.1.1	DisplayString	read-write
INT ospfVirtualLinkKeyId	1.3.6.1.4.1.890.1.5.8.13.40.6.1.2	INTEGER	read-write

RFC description

Zyxel GS4024 Ethernet switch system information and software version management.

Start monitoring ZyXEL GS-4024 managed Gigabit switch (firmware-version/per-port rate-limit/storm-control status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZYXEL-GS4024-MIB