All MIBs › ZYXEL-MES2110-MIB
Category: ZyXEL ES and GS Switch Platform
Description:
Defines ZyXEL MES-2110 10-port Metro Ethernet switch specific objects for configuration and status monitoring.
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| IpAddress | |
| enterprises |
From RFC1213-MIB
| DisplayString |
What Is ZYXEL-MES2110-MIB?
This is a proprietary ZyXEL MIB specific to the MES-2110, a 10-port Metro Ethernet access switch, exposing basic system identification (contact, name, location), management-module hardware inventory (part number, serial number, manufacture date, revision, description), SNMP version/community configuration, and default gateway settings. The data exposed is primarily device identity/inventory and basic management configuration rather than deep performance counters. It supports monitoring hardware inventory and software/security configuration status, such as tracking module serial number, hardware revision, and manufacture date for asset management, alongside the configured SNMP community strings. No specific external MIB dependency is evident beyond the vendor's private enterprise tree, though it complements the standard SNMPv2-MIB system group objects on the device. It is typically deployed on ZyXEL MES-2110 metro access switches used by service providers for last-mile Ethernet access delivery. Engineers can download the ZYXEL-MES2110-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ZYXEL-MES2110-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- module serial number
- module part number and hardware revision
- manufacture date
- system contact/name/location
- SNMP community string configuration
- default gateway setting
Supported Devices
- ZyXEL MES-2110 Metro Ethernet access switch
Monitoring Examples
Polling mes2110_MgtModSN, mes2110_MgtModPN, and mes2110_MgtModRev provides the switch's serial number, part number, and hardware revision for asset-tracking and RMA purposes. mes2110_SystemContact, mes2110_SystemName, and mes2110_SystemLocation let an NMS confirm the device is correctly labeled, while communityStringRO and communityStringRW expose the configured SNMP community strings, so an operator noticing an unexpected or default value here would flag a security misconfiguration.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| zyxel | 1.3.6.1.4.1.890 | |||
| products | 1.3.6.1.4.1.890.1 | |||
| accessSwitch | 1.3.6.1.4.1.890.1.5 | |||
| esSeries | 1.3.6.1.4.1.890.1.5.8 | |||
| mes2110_MIB | 1.3.6.1.4.1.890.1.5.8.2110 | |||
| mes2110_SystemInfo | 1.3.6.1.4.1.890.1.5.8.2110.1 | |||
| STR mes2110_SystemContact | 1.3.6.1.4.1.890.1.5.8.2110.1.1 | DisplayString | read-write | The contact person of this system. |
| STR mes2110_SystemName | 1.3.6.1.4.1.890.1.5.8.2110.1.2 | DisplayString | read-write | The name of this system. |
| STR mes2110_SystemLocation | 1.3.6.1.4.1.890.1.5.8.2110.1.3 | DisplayString | read-write | The location of this system. |
| mes2110_Mgt | 1.3.6.1.4.1.890.1.5.8.2110.2 | |||
| INT mes2110_MgtSnmpVer | 1.3.6.1.4.1.890.1.5.8.2110.2.1 | INTEGER | read-only | This object specifies the SNMP version(s) supported by the module. |
| STR mes2110_MgtModPN | 1.3.6.1.4.1.890.1.5.8.2110.2.2 | DisplayString | read-only | This object specifies the managemnt module part number. |
| STR mes2110_MgtModSN | 1.3.6.1.4.1.890.1.5.8.2110.2.3 | DisplayString | read-only | This object specifies the managemnt module serial number. |
| STR mes2110_MgtModManuDate | 1.3.6.1.4.1.890.1.5.8.2110.2.4 | DisplayString | read-only | This object specifies the management module manufacture date. |
| STR mes2110_MgtModRev | 1.3.6.1.4.1.890.1.5.8.2110.2.5 | DisplayString | read-only | This object specifies the managemnt module fireware revision number. |
| STR mes2110_MgtModDesc | 1.3.6.1.4.1.890.1.5.8.2110.2.6 | DisplayString | read-only | This object describes the management module. |
| STR communityStringRO | 1.3.6.1.4.1.890.1.5.8.2110.2.7 | DisplayString | read-write | This is the community string required to authenticate a read access to all MIB objects except for the read-write objects. |
| STR communityStringRW | 1.3.6.1.4.1.890.1.5.8.2110.2.8 | DisplayString | read-write | This is the community string required to authenticate a read or write access to all MIB objects. |
| IP defaultGateway | 1.3.6.1.4.1.890.1.5.8.2110.2.9 | IpAddress | read-write | This object specifies the default gateway address. |
| IP interfaceIpAddress | 1.3.6.1.4.1.890.1.5.8.2110.2.10 | IpAddress | read-write | This object identifies the IP address of the MIB-II interface on the management module. |
| IP interfaceSubnetMask | 1.3.6.1.4.1.890.1.5.8.2110.2.11 | IpAddress | read-write | This object specifies the subnet mask associated with the interface address of the module. |
| INT mgtStp | 1.3.6.1.4.1.890.1.5.8.2110.2.12 | INTEGER | read-write | This object specifies the switch STP function. |
| trapManagerTable | 1.3.6.1.4.1.890.1.5.8.2110.2.13 | not-accessible | This object contains the entries of Network Management Systems to which traps will be sent. | |
| trapManagerTableEntry | 1.3.6.1.4.1.890.1.5.8.2110.2.13.1 | not-accessible | This object specifies an entry in the trap manager table. | |
| INT trapManagerIndex | 1.3.6.1.4.1.890.1.5.8.2110.2.13.1.1 | INTEGER | read-only | |
| IP trapManagerIpAddress | 1.3.6.1.4.1.890.1.5.8.2110.2.13.1.2 | IpAddress | read-write | This object specifies the IP address of the destination of a network management system to which traps will be sent. |
| STR trapManagerName | 1.3.6.1.4.1.890.1.5.8.2110.2.13.1.3 | DisplayString | read-write | This object identifies the name of the destination of a network management system to which traps will be sent. |
| INT trapManagerStatus | 1.3.6.1.4.1.890.1.5.8.2110.2.13.1.4 | INTEGER | read-write | This object specifies a trap manager entry status in the trap manager table. (1) -- Enabled or (2) -- Disabled. |
| mes2110_Port | 1.3.6.1.4.1.890.1.5.8.2110.3 | |||
| mes2110_PortTable | 1.3.6.1.4.1.890.1.5.8.2110.3.1 | not-accessible | This object lists port entries on the mes2110 module. | |
| mes2110_PortEntry | 1.3.6.1.4.1.890.1.5.8.2110.3.1.1 | not-accessible | This object specifies a port entry in the port table, mes2110_PortTable. The port entry contains the information about a single port. | |
| INT portIndex | 1.3.6.1.4.1.890.1.5.8.2110.3.1.1.1 | INTEGER | read-only | This object is the port index, which uniquely identifies a port. It ranges from 1 to the total port number. |
| STR portName | 1.3.6.1.4.1.890.1.5.8.2110.3.1.1.2 | DisplayString | read-write | This object specifies the user defined descriptive name for the port. |
| INT portAdminStatus | 1.3.6.1.4.1.890.1.5.8.2110.3.1.1.3 | INTEGER | read-write | This object specifies the port admin state. Setting this object to disable(1) disables the port. Setting this object to enable(4) enables the port. |
| INT portLinkStatus | 1.3.6.1.4.1.890.1.5.8.2110.3.1.1.4 | INTEGER | read-only | This object indicates the link status attached to the port. |
| INT portSpeedMode | 1.3.6.1.4.1.890.1.5.8.2110.3.1.1.5 | INTEGER | read-write | This object specifies the speed of the port, 10M(1) or 100M(2) or 100M(3). |
| INT portDuplexMode | 1.3.6.1.4.1.890.1.5.8.2110.3.1.1.6 | INTEGER | read-write | This object specifies the duplex mode of the port, half duplex(1) or full duplex(2). |
| INT portAuto | 1.3.6.1.4.1.890.1.5.8.2110.3.1.1.7 | INTEGER | read-write | This object specifies the auto negotiation status of the port. |
| INT portFfc | 1.3.6.1.4.1.890.1.5.8.2110.3.1.1.8 | INTEGER | read-write | This object specifies the force flow control status of a port. |
| mes2110_Traps | 1.3.6.1.4.1.890.1.5.8.2110.4 | |||
| NTF almColdStart | 1.3.6.1.4.1.890.1.5.8.2110.4.0.1 | This trap is sent when the system is started from power down. | ||
| NTF almWarmStart | 1.3.6.1.4.1.890.1.5.8.2110.4.0.2 | This trap is sent when the system is reset. | ||
| NTF almLinkUp | 1.3.6.1.4.1.890.1.5.8.2110.4.0.3 | This trap is sent when the link associated with the port indexed 'portIndex' changes its 'portLinkStatus' from down(2) to up(1). | ||
| NTF almLinkDown | 1.3.6.1.4.1.890.1.5.8.2110.4.0.4 | This trap is sent when the link associated with the port indexed 'portIndex' changes its 'portLinkStatus' from up(1) to down(2). | ||
| NTF almConfChange | 1.3.6.1.4.1.890.1.5.8.2110.4.0.5 | This trap is sent when the system configuration has been changed. |
RFC description
Zyxel vendor-private MIB for managing the MES2110 managed switch product line, including port, VLAN, and system monitoring.
Start monitoring ZyXEL MES-2110 Metro Ethernet access switch (hardware-inventory/SNMP-community config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.