All MIBs › ZYXEL-GS4024-MIB › routerIgmpState
routerIgmpState
Module: ZYXEL-GS4024-MIB
OID (symbolic): ZYXEL-GS4024-MIB::routerIgmpState
OID (numeric): 1.3.6.1.4.1.890.1.5.8.13.29.2
Node type: OBJECT-TYPE
Type: EnabledStatus
Access: read-write
What is routerIgmpState?
Turns IGMP on or off at the routing layer. (The source DESCRIPTION is empty, so this reading is inferred from the object name.)
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.890.1.5.8.13.29.2 snmpwalk -v2c -c public <target> ZYXEL-GS4024-MIB::routerIgmpState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.890.1.5.8.13.29.2.1 snmpget -v2c -c public <target> ZYXEL-GS4024-MIB::routerIgmpState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.890.1.5.8.13.29.2.1 s <value>
Start monitoring ZyXEL GS-4024 managed Gigabit switch (firmware-version/per-port rate-limit/storm-control status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZYXEL-GS4024-MIB::routerIgmpState OID value, configure state conditions and alerts, and monitor any ZyXEL GS-4024 managed Gigabit switch (firmware-version/per-port rate-limit/storm-control status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.890 | zyxel | IES5206-MIB |
| 1.3.6.1.4.1.890.1 | products | IES5206-MIB |
| 1.3.6.1.4.1.890.1.5 | accessSwitch | IES5206-MIB |
| 1.3.6.1.4.1.890.1.5.8 | esSeries | ZYXEL-ES2024A-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.890.1.5.8.13 | gs4024 | ZYXEL-GS4024-MIB |
| 1.3.6.1.4.1.890.1.5.8.13.29 | layer3Setup | ZYXEL-GS4024-MIB |
| 1.3.6.1.4.1.890.1.5.8.13.29.2 | routerIgmpState | ZYXEL-GS4024-MIB |