ZYXEL-GS4024-MIB :: vlanStackPortMode

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ZYXEL-GS4024-MIB › vlanStackPortMode

vlanStackPortMode

Module: ZYXEL-GS4024-MIB

OID (symbolic): ZYXEL-GS4024-MIB::vlanStackPortMode

OID (numeric): 1.3.6.1.4.1.890.1.5.8.13.7.3.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Mode of the port.Set Access mode to have the switch add the SP TPID tag to all incoming frames received on this port. Set Access mode for ingress ports at the edge of the service provider's network. Set Tunnel mode (available for Gigabit ports only) for egress ports at the edge of the service provider's network. In order to support VLAN stacking on a port, the port must be able to allow frames of 1526 Bytes (1522 Bytes + 4 Bytes for the second tag) to pass through it. Access (0), tunnel (1)

What is vlanStackPortMode?

Role of the port in VLAN stacking: access(1) adds the service-provider tag to all incoming frames (customer edge) and tunnel(2) is for egress ports at the provider edge (Gigabit ports only). The text also says Access(0)/tunnel(1), which disagrees with the 1/2 enumeration. Ports must pass 1526-byte frames to carry the second tag.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.890.1.5.8.13.7.3.1.1
snmpwalk -v2c -c public <target> ZYXEL-GS4024-MIB::vlanStackPortMode

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.890.1.5.8.13.7.3.1.1.1
snmpget -v2c -c public <target> ZYXEL-GS4024-MIB::vlanStackPortMode.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.890.1.5.8.13.7.3.1.1.1 i <value>

Start monitoring ZyXEL GS-4024 managed Gigabit switch (firmware-version/per-port rate-limit/storm-control status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZYXEL-GS4024-MIB::vlanStackPortMode OID value, configure state conditions and alerts, and monitor any ZyXEL GS-4024 managed Gigabit switch (firmware-version/per-port rate-limit/storm-control status) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.890zyxelIES5206-MIB
1.3.6.1.4.1.890.1productsIES5206-MIB
1.3.6.1.4.1.890.1.5accessSwitchIES5206-MIB
1.3.6.1.4.1.890.1.5.8esSeriesZYXEL-ES2024A-MIB
Numeric OIDNameModule
1.3.6.1.4.1.890.1.5.8.13gs4024ZYXEL-GS4024-MIB
1.3.6.1.4.1.890.1.5.8.13.7vlanStackSetupZYXEL-GS4024-MIB
1.3.6.1.4.1.890.1.5.8.13.7.3vlanStackPortTableZYXEL-GS4024-MIB
1.3.6.1.4.1.890.1.5.8.13.7.3.1vlanStackPortEntryZYXEL-GS4024-MIB
1.3.6.1.4.1.890.1.5.8.13.7.3.1.1vlanStackPortModeZYXEL-GS4024-MIB