All MIBs › ZYXEL-GS4024-MIB › eventClearedTrap

eventClearedTrap

OID (symbolic): ZYXEL-GS4024-MIB::eventClearedTrap

OID (numeric): 1.3.6.1.4.1.890.1.5.8.13.37.2.2

Node type: NOTIFICATION-TYPE

Description: This trap is used to inform network management system that a normal type fault event has been cleared (state set off).

Objects are used as follows: - eventSeqNum is the sequence number of the this clearing event. Note that the sequence number of the cleared event is reported in the trapRefSeqNum object. - eventEventId specifies what event has been cleared. - eventSetTime indicates when fault event has been cleared. - eventInstanceType indicates what kind of object has been faulty. - eventInstanceId specifies what instance has been faulty. - trapRefSeqNum specifies the sequence number of the cleared event (i.e. the sequence number was assigned for the event in the events table). - trapSenderNodeId specifies the node ID of the sending network element if configuring it is supported for the network element, otherwise 0. - sysObjectID specifies what kind of equipment reports the clearing event.

For more information see the eventTable specification

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' ZYXEL-GS4024-MIB::eventClearedTrap
snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.890.1.5.8.13.37.2.2

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:54757->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (99593189) 11 days, 12:38:51.89
  SNMPv2-MIB::snmpTrapOID.0 = OID: ZYXEL-GS4024-MIB::eventClearedTrap

Start monitoring ZyXEL GS-4024 managed Gigabit switch (firmware-version/per-port rate-limit/storm-control status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZYXEL-GS4024-MIB::eventClearedTrap OID value, configure state conditions and alerts, and monitor any ZyXEL GS-4024 managed Gigabit switch (firmware-version/per-port rate-limit/storm-control status) from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.890	zyxel	IES5206-MIB
1.3.6.1.4.1.890.1	products	IES5206-MIB
1.3.6.1.4.1.890.1.5	accessSwitch	IES5206-MIB
1.3.6.1.4.1.890.1.5.8	esSeries	ZYXEL-ES2024A-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.890.1.5.8.13	gs4024	ZYXEL-GS4024-MIB
1.3.6.1.4.1.890.1.5.8.13.37	faultTrapsMIB	ZYXEL-GS4024-MIB
1.3.6.1.4.1.890.1.5.8.13.37.2	trapNotifications	ZYXEL-GS4024-MIB
1.3.6.1.4.1.890.1.5.8.13.37.2.2	eventClearedTrap	ZYXEL-GS4024-MIB

ZYXEL-GS4024-MIB :: eventClearedTrap

eventClearedTrap

Module

This MIB depends on