-- ****************************************************** -- $Id: ZXR10-ROUTE-MAP-MIB.mib -- -- ZXR10-ROUTE-MAP-MIB -- -- Mar. 2013, Qian Yi -- -- Copyright(c) 2010 by ZTE Corporaton -- All rights reservered -- ****************************************************** ZXR10-ROUTE-MAP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Unsigned32, Counter32,enterprises, IpAddress FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF DisplayString, MacAddress, TEXTUAL-CONVENTION, RowStatus,TruthValue FROM SNMPv2-TC Ipv6Address FROM IPV6-TC zxr10,zxr10RosngMIB FROM ZXR10-SMI; zxr10RMAPMIB MODULE-IDENTITY LAST-UPDATED "201802091400Z" ORGANIZATION "ZTE Corporation" CONTACT-INFO " Hu Jun Tel: +86-25-52870000 E-Mail: hu.jun11@zte.com.cn " DESCRIPTION "The MIB module to describe the RMAP protocol." REVISION "201802091400Z" DESCRIPTION "Add attribute zxr10RMAPAspathMatchName, Add index zxr10RMAPAspathMatchName, Modify the range of zxr10RMAPAspathNo." REVISION "201711201400Z" DESCRIPTION "Add zxr10RMAPSetCommunityNameTable, Add attribute zxr10RMAPExtCommunityMatchName, Add index zxr10RMAPExtCommunityMatchName, Modify the range of zxr10RMAPCommunityNo, Modify the range of zxr10RMAPCommunityMatchName, Modify the range of zxr10RMAPExtCommunityNo." REVISION "201707251400Z" DESCRIPTION "Add attributes zxr10RMAPCommunityMatchName in table zxr10RMAPMatchCommunityTable." REVISION "201707041400Z" DESCRIPTION "Modify the description of zxr10RMAPMatchRouteType" REVISION "201704281400Z" DESCRIPTION "Add zxr10RMAPMatchPlyRtIdTable, zxr10RMAPMatchIpv6PlyRtIdTable, zxr10RMAPSetPlyRtIdTable, zxr10RMAPSetMonitorGroupIdTable, zxr10RMAPLoadShareTable, zxr10RMAPContinueTable, zxr10RMAPTimeRangeTable" REVISION "201703201400Z" DESCRIPTION "Add zxr10RMAPMatchL3VniLabelTable,zxr10RMAPMatchL2VniLabelTable and modify the range of zxr10RMAPMatchRouteType" REVISION "201703081400Z" DESCRIPTION "Add zxr10RMAPSetL3vniLabelTable" REVISION "201612051400Z" DESCRIPTION "Modify the range of zxr10RMAPMatchEvpn" REVISION "201611171400Z" DESCRIPTION "Add zxr10RMAPSetVxlanTunnelSrcTable,zxr10RMAPSetEvpnMacIntfTable and zxr10RMAPSetL2vniLabelTable" REVISION "201608051400Z" DESCRIPTION "Add zxr10RMAPStrictPolicyTable,zxr10RMAPSetPathListTable and zxr10RMAPSetPathList6Table" REVISION "201607221400Z" DESCRIPTION "Add zxr10RMAPBlackHoleRouteTable and zxr10RMAPDefaultRouteTable" REVISION "201606241000Z" DESCRIPTION "Add zxr10RMAPMatchEvpnTable" REVISION "201412251400Z" DESCRIPTION "Add zxr10RMAPSetAspathPrepOrRep node" REVISION "201410091400Z" DESCRIPTION "Add zxr10RMAPSetNextHopPeerAddrTable and zxr10RMAPSetIpv6NHorPeerAddTable" REVISION "201409011400Z" DESCRIPTION "Discard zxr10RMAPMatchIpv6AddressTable and add zxr10RMAPMatchIpv6AddrPflTable" REVISION "201408131400Z" DESCRIPTION "Add zxr10RMAPMatchAsLenTable,zxr10RMAPMatchAsUnqLenTable,zxr10RMAPMatchIpSourceAclTable, zxr10RMAPMatchIpSourcePflTable,zxr10RMAPMatchLocalPrefTable,zxr10RMAPMatchOriginTable, zxr10RMAPSetPathSelTable,zxr10RMAPSetPolicyPrioTable,zxr10RMAPMatchIpAlgMetricTable, zxr10RMAPMatchIpv6AlgMetricTable,zxr10RMAPSetTraffIdxTable." REVISION "201402101400Z" DESCRIPTION "Modify name of zxr10RMAPSetGlobalIp to zxr10RMAPSetGlobalIPAddr. Add attributes zxr10RMAPSetGlobalIpConst and zxr10RMAPSetGlobalNextHopConst in table zxr10RMAPSetGlobalTable. Add attributes zxr10RMAPSetVrfIpConst and zxr10RMAPSetVrfNextHopConst in table zxr10RMAPSetVrfTable." REVISION "201401221400Z" DESCRIPTION "Modify the size of DisplayString" REVISION "201311221400Z" DESCRIPTION "add: zxr10RMAPMIB Initial version of this MIB module." ::= { zxr10RosngMIB 604 } --------------------------------------------------------------------------- --------------------------------------------------------------------------- -- Groups in the ZXR10-ROUTE-MAP-MIB MIB Module --------------------------------------------------------------------------- -- Following objects are defined. zxr10RMAPGlobalObjects OBJECT IDENTIFIER ::= { zxr10RMAPMIB 1} zxr10RMAPObjects OBJECT IDENTIFIER ::= { zxr10RMAPMIB 2} zxr10RMAPNotifications OBJECT IDENTIFIER ::= { zxr10RMAPMIB 3} zxr10RMAPConformance OBJECT IDENTIFIER ::= { zxr10RMAPMIB 4} zxr10RMAPRuleObjects OBJECT IDENTIFIER ::= { zxr10RMAPObjects 1} -------------------------------------------------------------- -------------------------------------------------------------- -- Textual conventions -------------------------------------------------------------- --The follow part defined some data types which will be used in this --mib file later -- RmapPermitDeny ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "permit = 0,deny = 1." SYNTAX INTEGER{permit(1),deny(2)} RmapPrependReplace ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "prepend = 1,replace = 2." SYNTAX INTEGER{prepend(1),replace(2)} RmapSetMetricAct ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "plus(+) = 1,minus(-) = 2." SYNTAX INTEGER{plus(1),minus(2)} RmapSetMetricType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "external IS-IS external metric internal IS-IS internal metric type-1 OSPF external type 1 metric type-2 OSPF external type 2 metric" SYNTAX INTEGER{internal(1),external(2),type-1(3),type-2(4)} RmapSetLevel ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " level-1 Import into a level-1 area level-1-2 Import into level-1 and level-2 level-2 Import into level-2 sub-domain" SYNTAX INTEGER{level-1(1),level-2(2),level-1-2(3)} RmapSetOrigin ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " egp(1) Remote EGP igp(0) Local IGP incomplete(2) Unknown heritage" SYNTAX INTEGER{igp(1),egp(2),incomplete(3)} RmapMatchRouteType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "local Locally generated route.Value is 1. internal Internal route (including OSPF intra/inter area).Value is 2. level-1 IS-IS level-1 route.Value is 3. level-2 IS-IS level-2 route.Value is 4. external External route (OSPF type 1/2).Value is 5. type-1 OSPF external type 1 route.Value is 6. type-2 OSPF external type 2 route.Value is 7. ebgp External border gateway protocol(EBGP) route.Value is 8. ibgp Internal border gateway protocol(IBGP) route.Value is 9. static Static route.Value is 10. bgp-agg BGP aggregate route.Value is 11." SYNTAX INTEGER{local(1),internal(2),level-1(3),level-2(4),external(5), type-1(6),type-2(7),ebgp(8),ibgp(9),static(10),bgp-agg(11)} RmapSetComm ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "additive Add to the existing community. Value is 5. internet Internet(Well known community). Value is 4. no-advertise Do not advertise to any peer. Value is 2. no-export Do not export to next AS. Value is 1. no-export-subconfed Do not send outside local AS. Value is 3. none No community attribute. Value is 6." SYNTAX INTEGER{no-export(1),no-advertise(2),no-export-subconfed(3), internet(4),additive(5),none(6)} RmapSetRt ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "additive Add to the existing extcommunity.Value is 6. remove Remove the existing extcommunity.Value is 7." SYNTAX INTEGER{additive(6),remove(7)} RmapSetPrec ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "critical Set critical precedence (6) flash Set flash precedence (4) flash-override Set flash override precedence (5) immediate Set immediate precedence (3) internet Set internetwork control precedence (7) network Set network control precedence (8) priority Set priority precedence (2) routine Set routine precedence (1)" SYNTAX INTEGER{routine(1),priority(2),immediate(3), flash(4),flash-override(5),critical(6),internet(7),network(8)} RmapSetTos ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "max-reliability Set max reliable TOS (3) max-throughput Set max throughput TOS (4) min-delay Set min delay TOS (5) min-monetary-cost Set min monetary cost TOS (2) normal Set normal TOS (1)" SYNTAX INTEGER{normal(1),min-monetary-cost(2),max-reliability(3),max-throughput(4),min-delay(5)} RmapSetGlobalIpConst ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Value is 3." SYNTAX INTEGER{ipconst(3)} RmapSetGlobalNextHopConst ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Value is 1." SYNTAX INTEGER{nexthopconst(1)} RmapSetVrfIpConst ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Value is 1." SYNTAX INTEGER{vrfipconst(1)} RmapSetVrfNextHopConst ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Value is 2." SYNTAX INTEGER{vrfnexthopconst(2)} RmapMatchAlg ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "eq = 1,ge = 2,le = 3." SYNTAX INTEGER{eq(1),ge(2),le(3)} RmapSetPath ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "all Path for imitating iBGP full-mesh backup Path for rapid convergence best-path Path for load sharing group-best Path for elimination of routing oscillation" SYNTAX INTEGER{all(1),backup(2),best-path(3),group-best(4)} RmapSetPathInstall ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Value is 1." SYNTAX INTEGER{install(1)} RmapSetPathMulpro ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Value is 2." SYNTAX INTEGER{multipath-protect(2)} RmapSetPathAdvertise ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Value is 3." SYNTAX INTEGER{advertise(3)} -------------------------------------------------------------- -------------------------------------------------------------- --Table Define -- -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPRuleObjects -------------------------------------------------------------- --1 zxr10RMAPNameTable --2 zxr10RMAPMatchAspathTable --3 zxr10RMAPMatchCommunityTable --4 zxr10RMAPMatchExtCommunityTable --5 zxr10RMAPMatchInterfaceTable --6 zxr10RMAPMatchIpAddressAclTable --7 zxr10RMAPMatchIpAddressPflTable --8 zxr10RMAPMatchIpMetricTable --9 zxr10RMAPMatchIpNextHopTable --10 zxr10RMAPMatchIpTagTable --11 zxr10RMAPMatchIpv6AddressTable --12 zxr10RMAPMatchIpv6MetricTable --13 zxr10RMAPMatchIpv6NextHopTable --14 zxr10RMAPMatchIpv6TagTable --15 zxr10RMAPMatchRdTable --16 zxr10RMAPMatchRouteTypeTable --17 zxr10RMAPSetAspathTable --18 zxr10RMAPSetCommunityConstTable --19 zxr10RMAPSetCommunityAsnnTable --20 zxr10RMAPSetCommunityUintTable --21 zxr10RMAPSetDampeningTable --22 zxr10RMAPSetDscpTable --23 zxr10RMAPSetRtTable --24 zxr10RMAPSetSooTable --25 zxr10RMAPSetGlobalTable --26 zxr10RMAPSetInterfaceTable --27 zxr10RMAPSetIpMetricTable --28 zxr10RMAPSetIpMetricTypeTable --29 zxr10RMAPSetIpNextHopTable --30 zxr10RMAPSetIpPathTable --31 zxr10RMAPSetIpPrecTable --32 zxr10RMAPSetIpTagTable --33 zxr10RMAPSetIpTosTable --34 zxr10RMAPSetIpv6MetricTable --35 zxr10RMAPSetIpv6MetricTypeTable --36 zxr10RMAPSetIpv6NextHopTable --37 zxr10RMAPSetIpv6PathTable --38 zxr10RMAPSetIpv6PrecTable --39 zxr10RMAPSetIpv6TagTable --40 zxr10RMAPSetIpv6TrafficTable --41 zxr10RMAPSetLevelTable --42 zxr10RMAPSetLocalPreTable --43 zxr10RMAPSetMplsTable --44 zxr10RMAPSetNextHopTable --45 zxr10RMAPSetOriginTable --46 zxr10RMAPSetQosIdTable --47 zxr10RMAPSetVrfTable --48 zxr10RMAPMatchAsLenTable --49 zxr10RMAPMatchAsUnqLenTable --50 zxr10RMAPMatchIpSourceAclTable --51 zxr10RMAPMatchIpSourcePflTable --52 zxr10RMAPMatchLocalPrefTable --53 zxr10RMAPMatchOriginTable --54 zxr10RMAPSetPathSelTable --55 zxr10RMAPSetPolicyPrioTable --56 zxr10RMAPMatchIpAlgMetricTable --57 zxr10RMAPMatchIpv6AlgMetricTable --58 zxr10RMAPSetTraffIdxTable --59 zxr10RMAPSetTraffIdxTable --60 zxr10RMAPSetNextHopPeerAddrTable --61 zxr10RMAPSetIpv6NHorPeerAddTable --62 zxr10RMAPMatchEvpnTable --63 zxr10RMAPBlackHoleRouteTable --64 zxr10RMAPDefaultRouteTable --65 zxr10RMAPStrictPolicyTable --66 zxr10RMAPSetPathListTable --67 zxr10RMAPSetPathList6Table --68 zxr10RMAPSetVxlanTunnelSrcTable --69 zxr10RMAPSetEvpnMacIntfTable --70 zxr10RMAPSetL2vniLabelTable --71 zxr10RMAPSetL3vniLabelTable --72 zxr10RMAPMatchL3VniLabelTable --73 zxr10RMAPMatchL2VniLabelTable --74 zxr10RMAPMatchPlyRtIdTable --75 zxr10RMAPMatchIpv6PlyRtIdTable --76 zxr10RMAPSetPlyRtIdTable --77 zxr10RMAPSetMonitorGroupIdTable --78 zxr10RMAPLoadShareTable --79 zxr10RMAPContinueTable --80 zxr10RMAPTimeRangeTable --81 zxr10RMAPSetCommunityNameTable -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPNameTable -------------------------------------------------------------- zxr10RMAPNameTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Name Table" ::= { zxr10RMAPRuleObjects 1 } zxr10RMAPNameEntry OBJECT-TYPE SYNTAX Zxr10RMAPNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Name" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPNameTable 1 } Zxr10RMAPNameEntry ::=SEQUENCE { zxr10RMAPName DisplayString, zxr10RMAPSequence Integer32, zxr10RMAPAction RmapPermitDeny, zxr10RMAPRowStatus RowStatus } zxr10RMAPName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPNameEntry 1 } zxr10RMAPSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPNameEntry 2 } zxr10RMAPAction OBJECT-TYPE SYNTAX RmapPermitDeny MAX-ACCESS read-create STATUS current DESCRIPTION "permit:Match success deny :Match failed" ::= { zxr10RMAPNameEntry 3 } zxr10RMAPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPNameEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchAspathTable -------------------------------------------------------------- zxr10RMAPMatchAspathTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchAspathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Match Aspath Table" ::= { zxr10RMAPRuleObjects 2 } zxr10RMAPMatchAspathEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchAspathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match BGP as-path list" INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPAspathNo, zxr10RMAPAspathMatchName} ::= { zxr10RMAPMatchAspathTable 1 } Zxr10RMAPMatchAspathEntry ::=SEQUENCE { zxr10RMAPAspathName DisplayString, zxr10RMAPAspathSequence Integer32, zxr10RMAPAspathNo Integer32, zxr10RMAPAspathMatchName DisplayString, zxr10RMAPAspathRowStatus RowStatus } zxr10RMAPAspathName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPMatchAspathEntry 1 } zxr10RMAPAspathSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchAspathEntry 2 } zxr10RMAPAspathNo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Aspath List Number. The range of config is 0 to 199. Each sequence has 10 match aspath items at most" ::= { zxr10RMAPMatchAspathEntry 3 } zxr10RMAPAspathMatchName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Aspath (0-31 characters)" ::= { zxr10RMAPMatchAspathEntry 4 } zxr10RMAPAspathRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPMatchAspathEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchCommunityTable -------------------------------------------------------------- zxr10RMAPMatchCommunityTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Match Community Table" ::= { zxr10RMAPRuleObjects 3 } zxr10RMAPMatchCommunityEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match BGP community list" INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPCommunityNo, zxr10RMAPCommunityMatchName} ::= { zxr10RMAPMatchCommunityTable 1 } Zxr10RMAPMatchCommunityEntry ::=SEQUENCE { zxr10RMAPCommunityName DisplayString, zxr10RMAPCommunitySequence Integer32, zxr10RMAPCommunityNo Integer32, zxr10RMAPCommunityMatchName DisplayString, zxr10RMAPCommunityRowStatus RowStatus } zxr10RMAPCommunityName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPMatchCommunityEntry 1 } zxr10RMAPCommunitySequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchCommunityEntry 2 } zxr10RMAPCommunityNo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Community list number. The range of config is 0 to 499. Each sequence has 10 match community items at most." ::= { zxr10RMAPMatchCommunityEntry 3 } zxr10RMAPCommunityMatchName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Community (0-31 characters)" ::= { zxr10RMAPMatchCommunityEntry 4 } zxr10RMAPCommunityRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPMatchCommunityEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchExtCommunityTable -------------------------------------------------------------- zxr10RMAPMatchExtCommunityTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchExtCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Match ExtCommunity Table" ::= { zxr10RMAPRuleObjects 4 } zxr10RMAPMatchExtCommunityEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchExtCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match BGP extcommunity list" INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPExtCommunityNo, zxr10RMAPExtCommunityMatchName} ::= { zxr10RMAPMatchExtCommunityTable 1 } Zxr10RMAPMatchExtCommunityEntry ::=SEQUENCE { zxr10RMAPExtCommunityName DisplayString, zxr10RMAPExtCommunitySequence Integer32, zxr10RMAPExtCommunityNo Integer32, zxr10RMAPExtCommunityMatchName DisplayString, zxr10RMAPExtCommunityRowStatus RowStatus } zxr10RMAPExtCommunityName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPMatchExtCommunityEntry 1 } zxr10RMAPExtCommunitySequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchExtCommunityEntry 2 } zxr10RMAPExtCommunityNo OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "ExtCommunity list number. The range of config is 0 to 500. Each sequence has 10 match extcommunity items at most." ::= { zxr10RMAPMatchExtCommunityEntry 3 } zxr10RMAPExtCommunityMatchName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of ExtCommunity (0-31 characters)" ::= { zxr10RMAPMatchExtCommunityEntry 4 } zxr10RMAPExtCommunityRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPMatchExtCommunityEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchInterfaceTable -------------------------------------------------------------- zxr10RMAPMatchInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Match Interface Table" ::= { zxr10RMAPRuleObjects 5 } zxr10RMAPMatchInterfaceEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match first hop interface of route" INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPInterface} ::= { zxr10RMAPMatchInterfaceTable 1 } Zxr10RMAPMatchInterfaceEntry ::=SEQUENCE { zxr10RMAPInterfaceName DisplayString, zxr10RMAPInterfaceSequence Integer32, zxr10RMAPInterface DisplayString, zxr10RMAPInterfaceRowStatus RowStatus } zxr10RMAPInterfaceName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPMatchInterfaceEntry 1 } zxr10RMAPInterfaceSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchInterfaceEntry 2 } zxr10RMAPInterface OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface Name(1-31 characters). Each sequence has 10 match interface items at most. This match item supports these types of interface: [PORT-CLASS-FEI, PORT-CLASS-GEI-END] [PORT-CLASS-OC, PORT-TYPE-OC48] [PORT-TYPE-OC192, PORT-CLASS-E1-END] [PORT-CLASS-E1-C-CH, PORT-TYPE-ULEI] [PORT-CLASS-GVI, PORT-CLASS-GVI-END] [PORT-CLASS-QX, PORT-CLASS-QX-END] [PORT-TYPE-MANAGE, PORT-TYPE-MANAGE] [PORT-CLASS-DSL, PORT-CLASS-DSL-END] [PORT-CLASS-SPECIAL, PORT-TYPE-SUPERQINQ] [PORT-TYPE-TE-TUNNEL, PORT-TYPE-IPSEC-TUNNEL] [PORT-TYPE-CIP, PORT-TYPE-QX-LOGIC]." ::= { zxr10RMAPMatchInterfaceEntry 3 } zxr10RMAPInterfaceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPMatchInterfaceEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchIpAddressAclTable -------------------------------------------------------------- zxr10RMAPMatchIpAddressAclTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchIpAddressAclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Match IpAddress Table(match ip address by acl)." ::= { zxr10RMAPRuleObjects 6 } zxr10RMAPMatchIpAddressAclEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchIpAddressAclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match address of route or match packet. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. Otherwise, It conflicts with the item that match ip address by pfl. If zxr10RMAPIsConfigAcl is true,it expresses that this config is match ip address by acl." INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPAclName, zxr10RMAPIsConfigAcl} ::= { zxr10RMAPMatchIpAddressAclTable 1 } Zxr10RMAPMatchIpAddressAclEntry ::=SEQUENCE { zxr10RMAPMatchAclName DisplayString, zxr10RMAPMatchAclSequence Integer32, zxr10RMAPAclName DisplayString, zxr10RMAPIsConfigAcl TruthValue, zxr10RMAPMatchAclRowStatus RowStatus } zxr10RMAPMatchAclName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPMatchIpAddressAclEntry 1 } zxr10RMAPMatchAclSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchIpAddressAclEntry 2 } zxr10RMAPAclName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of an access-list(1-31 characters). Each sequence has 10 match ip address items at most." ::= { zxr10RMAPMatchIpAddressAclEntry 3 } zxr10RMAPIsConfigAcl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "It expresses that this config is match ip address by acl." ::= { zxr10RMAPMatchIpAddressAclEntry 4 } zxr10RMAPMatchAclRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPMatchIpAddressAclEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchIpAddressPflTable -------------------------------------------------------------- zxr10RMAPMatchIpAddressPflTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchIpAddressPflEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Match IpAddress Table(match ip address by pfl)" ::= { zxr10RMAPRuleObjects 7 } zxr10RMAPMatchIpAddressPflEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchIpAddressPflEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match address of route or match packet. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. Otherwise, It conflicts with the item that match ip address by acl." INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPPflName, zxr10RMAPIsConfigPfl} ::= { zxr10RMAPMatchIpAddressPflTable 1 } Zxr10RMAPMatchIpAddressPflEntry ::=SEQUENCE { zxr10RMAPMatchPflName DisplayString, zxr10RMAPMatchPflSequence Integer32, zxr10RMAPPflName DisplayString, zxr10RMAPIsConfigPfl TruthValue, zxr10RMAPMatchPflRowStatus RowStatus } zxr10RMAPMatchPflName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPMatchIpAddressPflEntry 1 } zxr10RMAPMatchPflSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchIpAddressPflEntry 2 } zxr10RMAPPflName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of a prefix list (1-31 characters). Each sequence has 10 match ip address items at most." ::= { zxr10RMAPMatchIpAddressPflEntry 3 } zxr10RMAPIsConfigPfl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "It expresses that this config is match ip address by pfl." ::= { zxr10RMAPMatchIpAddressPflEntry 4 } zxr10RMAPMatchPflRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPMatchIpAddressPflEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchIpMetricTable -------------------------------------------------------------- zxr10RMAPMatchIpMetricTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchIpMetricEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Match IpMetric Table" ::= { zxr10RMAPRuleObjects 8 } zxr10RMAPMatchIpMetricEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchIpMetricEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match metric of route. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type." INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPIpMetric} ::= { zxr10RMAPMatchIpMetricTable 1 } Zxr10RMAPMatchIpMetricEntry ::=SEQUENCE { zxr10RMAPIpMetricName DisplayString, zxr10RMAPIpMetricSequence Integer32, zxr10RMAPIpMetric Unsigned32, zxr10RMAPIpMetricRowStatus RowStatus } zxr10RMAPIpMetricName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPMatchIpMetricEntry 1 } zxr10RMAPIpMetricSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchIpMetricEntry 2 } zxr10RMAPIpMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " Metric Value. The range of config is 0 to 4294967295. Each sequence has 10 match ip metric items at most." ::= { zxr10RMAPMatchIpMetricEntry 3 } zxr10RMAPIpMetricRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPMatchIpMetricEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchIpNextHopTable -------------------------------------------------------------- zxr10RMAPMatchIpNextHopTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchIpNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Match IpNextHop Table" ::= { zxr10RMAPRuleObjects 9 } zxr10RMAPMatchIpNextHopEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchIpNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match next-hop address of route. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type." INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPIpNextHop} ::= { zxr10RMAPMatchIpNextHopTable 1 } Zxr10RMAPMatchIpNextHopEntry ::=SEQUENCE { zxr10RMAPIpNextHopName DisplayString, zxr10RMAPIpNextHopSequence Integer32, zxr10RMAPIpNextHop DisplayString, zxr10RMAPIpNextHopRowStatus RowStatus } zxr10RMAPIpNextHopName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPMatchIpNextHopEntry 1 } zxr10RMAPIpNextHopSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchIpNextHopEntry 2 } zxr10RMAPIpNextHop OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of an access-list(1-31 characters). Each sequence has 10 match ip next-hop items at most." ::= { zxr10RMAPMatchIpNextHopEntry 3 } zxr10RMAPIpNextHopRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPMatchIpNextHopEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchIpTagTable -------------------------------------------------------------- zxr10RMAPMatchIpTagTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchIpTagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Match IpTag Table" ::= { zxr10RMAPRuleObjects 10 } zxr10RMAPMatchIpTagEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchIpTagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match tag of route. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type." INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPIpTag} ::= { zxr10RMAPMatchIpTagTable 1 } Zxr10RMAPMatchIpTagEntry ::=SEQUENCE { zxr10RMAPIpTagName DisplayString, zxr10RMAPIpTagSequence Integer32, zxr10RMAPIpTag Unsigned32, zxr10RMAPIpTagRowStatus RowStatus } zxr10RMAPIpTagName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPMatchIpTagEntry 1 } zxr10RMAPIpTagSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchIpTagEntry 2 } zxr10RMAPIpTag OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Tag Value. The range of config is 0 to 4294967295. Each sequence has 10 match ip tag items at most." ::= { zxr10RMAPMatchIpTagEntry 3 } zxr10RMAPIpTagRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPMatchIpTagEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchIpv6AddressTable -------------------------------------------------------------- zxr10RMAPMatchIpv6AddressTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchIpv6AddressEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Route-map Match Ipv6Address Table" ::= { zxr10RMAPRuleObjects 11 } zxr10RMAPMatchIpv6AddressEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchIpv6AddressEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Match address of route or match packet. This match item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type." INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPIpv6Address} ::= { zxr10RMAPMatchIpv6AddressTable 1 } Zxr10RMAPMatchIpv6AddressEntry ::=SEQUENCE { zxr10RMAPIpv6AddressName DisplayString, zxr10RMAPIpv6AddressSequence Integer32, zxr10RMAPIpv6Address DisplayString, zxr10RMAPIpv6AddressRowStatus RowStatus } zxr10RMAPIpv6AddressName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPMatchIpv6AddressEntry 1 } zxr10RMAPIpv6AddressSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchIpv6AddressEntry 2 } zxr10RMAPIpv6Address OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Name of an access-list(1-31 characters). Each sequence has 10 match ipv6 address items at most." ::= { zxr10RMAPMatchIpv6AddressEntry 3 } zxr10RMAPIpv6AddressRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "RowStatus" ::= { zxr10RMAPMatchIpv6AddressEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchIpv6AddrPflTable -------------------------------------------------------------- zxr10RMAPMatchIpv6AddrPflTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchIpv6AddrPflEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Match Ipv6Address pfl Table" ::= { zxr10RMAPRuleObjects 59 } zxr10RMAPMatchIpv6AddrPflEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchIpv6AddrPflEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match address of route or match packet. This match item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type." INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPIpv6AddrPfl, zxr10RMAPIpv6IsConfigPfl} ::= { zxr10RMAPMatchIpv6AddrPflTable 1 } Zxr10RMAPMatchIpv6AddrPflEntry ::=SEQUENCE { zxr10RMAPIpv6AddrPflName DisplayString, zxr10RMAPIpv6AddrPflSequence Integer32, zxr10RMAPIpv6AddrPfl DisplayString, zxr10RMAPIpv6IsConfigPfl TruthValue, zxr10RMAPIpv6AddrPflRowStatus RowStatus } zxr10RMAPIpv6AddrPflName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPMatchIpv6AddrPflEntry 1 } zxr10RMAPIpv6AddrPflSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchIpv6AddrPflEntry 2 } zxr10RMAPIpv6AddrPfl OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of an access-list(1-31 characters). Each sequence has 10 match ipv6 address items at most." ::= { zxr10RMAPMatchIpv6AddrPflEntry 3 } zxr10RMAPIpv6IsConfigPfl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "It expresses that this config is match ipv6 address by pfl." ::= { zxr10RMAPMatchIpv6AddrPflEntry 4 } zxr10RMAPIpv6AddrPflRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPMatchIpv6AddrPflEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchIpv6MetricTable -------------------------------------------------------------- zxr10RMAPMatchIpv6MetricTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchIpv6MetricEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Match Ipv6Metric Table" ::= { zxr10RMAPRuleObjects 12 } zxr10RMAPMatchIpv6MetricEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchIpv6MetricEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match metric of route. This match item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type." INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPIpv6Metric} ::= { zxr10RMAPMatchIpv6MetricTable 1 } Zxr10RMAPMatchIpv6MetricEntry ::=SEQUENCE { zxr10RMAPIpv6MetricName DisplayString, zxr10RMAPIpv6MetricSequence Integer32, zxr10RMAPIpv6Metric Unsigned32, zxr10RMAPIpv6MetricRowStatus RowStatus } zxr10RMAPIpv6MetricName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPMatchIpv6MetricEntry 1 } zxr10RMAPIpv6MetricSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchIpv6MetricEntry 2 } zxr10RMAPIpv6Metric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " Metric Value. The range of config is 0 to 4294967295. Each sequence has 10 match ipv6 metric items at most." ::= { zxr10RMAPMatchIpv6MetricEntry 3 } zxr10RMAPIpv6MetricRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPMatchIpv6MetricEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchIpv6NextHopTable -------------------------------------------------------------- zxr10RMAPMatchIpv6NextHopTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchIpv6NextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Match Ipv6NextHop Table" ::= { zxr10RMAPRuleObjects 13 } zxr10RMAPMatchIpv6NextHopEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchIpv6NextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match next-hop address of route. This match item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type." INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPIpv6NextHop} ::= { zxr10RMAPMatchIpv6NextHopTable 1 } Zxr10RMAPMatchIpv6NextHopEntry ::=SEQUENCE { zxr10RMAPIpv6NextHopName DisplayString, zxr10RMAPIpv6NextHopSequence Integer32, zxr10RMAPIpv6NextHop DisplayString, zxr10RMAPIpv6NextHopRowStatus RowStatus } zxr10RMAPIpv6NextHopName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPMatchIpv6NextHopEntry 1 } zxr10RMAPIpv6NextHopSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchIpv6NextHopEntry 2 } zxr10RMAPIpv6NextHop OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of an access-list(1-31 characters). Each sequence has 10 match ipv6 next-hop items at most." ::= { zxr10RMAPMatchIpv6NextHopEntry 3 } zxr10RMAPIpv6NextHopRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPMatchIpv6NextHopEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchIpv6TagTable -------------------------------------------------------------- zxr10RMAPMatchIpv6TagTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchIpv6TagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Match Ipv6Tag Table" ::= { zxr10RMAPRuleObjects 14 } zxr10RMAPMatchIpv6TagEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchIpv6TagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match tag of route. This match item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type." INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPIpv6Tag} ::= { zxr10RMAPMatchIpv6TagTable 1 } Zxr10RMAPMatchIpv6TagEntry ::=SEQUENCE { zxr10RMAPIpv6TagName DisplayString, zxr10RMAPIpv6TagSequence Integer32, zxr10RMAPIpv6Tag Unsigned32, zxr10RMAPIpv6TagRowStatus RowStatus } zxr10RMAPIpv6TagName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPMatchIpv6TagEntry 1 } zxr10RMAPIpv6TagSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchIpv6TagEntry 2 } zxr10RMAPIpv6Tag OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Tag Value. The range of config is 0 to 4294967295. Each sequence has 10 match ipv6 tag items at most." ::= { zxr10RMAPMatchIpv6TagEntry 3 } zxr10RMAPIpv6TagRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPMatchIpv6TagEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchRdTable -------------------------------------------------------------- zxr10RMAPMatchRdTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchRdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Match Rd Table" ::= { zxr10RMAPRuleObjects 15 } zxr10RMAPMatchRdEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchRdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match BGP/VPN rd list" INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPMatchRd} ::= { zxr10RMAPMatchRdTable 1 } Zxr10RMAPMatchRdEntry ::=SEQUENCE { zxr10RMAPMatchRdName DisplayString, zxr10RMAPMatchRdSequence Integer32, zxr10RMAPMatchRd Integer32, zxr10RMAPMatchRdRowStatus RowStatus } zxr10RMAPMatchRdName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPMatchRdEntry 1 } zxr10RMAPMatchRdSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchRdEntry 2 } zxr10RMAPMatchRd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Rd-list number. The range of config is 1 to 500. 0 is invalid value. Each sequence has 10 match rd-list items at most." ::= { zxr10RMAPMatchRdEntry 3 } zxr10RMAPMatchRdRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPMatchRdEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchRouteTypeTable -------------------------------------------------------------- zxr10RMAPMatchRouteTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchRouteTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Match RouteType Table" ::= { zxr10RMAPRuleObjects 16 } zxr10RMAPMatchRouteTypeEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchRouteTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match route-type of route" INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPMatchRouteType, zxr10RMAPMatchExternType} ::= { zxr10RMAPMatchRouteTypeTable 1 } Zxr10RMAPMatchRouteTypeEntry ::=SEQUENCE { zxr10RMAPMatchRouteTypeName DisplayString, zxr10RMAPMatchRouteTypeSequence Integer32, zxr10RMAPMatchRouteType RmapMatchRouteType, zxr10RMAPMatchExternType RmapMatchRouteType, zxr10RMAPMatchRouteTypeRowStatus RowStatus } zxr10RMAPMatchRouteTypeName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPMatchRouteTypeEntry 1 } zxr10RMAPMatchRouteTypeSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchRouteTypeEntry 2 } zxr10RMAPMatchRouteType OBJECT-TYPE SYNTAX RmapMatchRouteType MAX-ACCESS not-accessible STATUS current DESCRIPTION "local Locally generated route.Value is 1. internal Internal route (including OSPF intra/inter area).Value is 2. level-1 IS-IS level-1 route.Value is 3. level-2 IS-IS level-2 route.Value is 4. external External route (OSPF type 1/2).Value is 5. ebgp External border gateway protocol(EBGP) route.Value is 8. ibgp Internal border gateway protocol(IBGP) route.Value is 9. static Static route.Value is 10. bgp-agg BGP aggregate route.Value is 11." ::= { zxr10RMAPMatchRouteTypeEntry 3 } zxr10RMAPMatchExternType OBJECT-TYPE SYNTAX RmapMatchRouteType MAX-ACCESS not-accessible STATUS current DESCRIPTION "type-1 OSPF external type 1 route.Value is 6. type-2 OSPF external type 2 route.Value is 7." ::= { zxr10RMAPMatchRouteTypeEntry 4 } zxr10RMAPMatchRouteTypeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPMatchRouteTypeEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetAspathTable -------------------------------------------------------------- zxr10RMAPSetAspathTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetAspathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set Aspath Table" ::= { zxr10RMAPRuleObjects 17 } zxr10RMAPSetAspathEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetAspathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set prepend string for a BGP as-path attribute. 0 is invalid value." INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetAspathTable 1 } Zxr10RMAPSetAspathEntry ::=SEQUENCE { zxr10RMAPSetAspathName DisplayString, zxr10RMAPSetAspathSequence Integer32, zxr10RMAPSetAspathAsnd1 Unsigned32, zxr10RMAPSetAspathAsnd2 Unsigned32, zxr10RMAPSetAspathAsnd3 Unsigned32, zxr10RMAPSetAspathAsnd4 Unsigned32, zxr10RMAPSetAspathAsnd5 Unsigned32, zxr10RMAPSetAspathAsnd6 Unsigned32, zxr10RMAPSetAspathAsnd7 Unsigned32, zxr10RMAPSetAspathAsnd8 Unsigned32, zxr10RMAPSetAspathAsnd9 Unsigned32, zxr10RMAPSetAspathAsnd10 Unsigned32, zxr10RMAPSetAspathPrepOrRep RmapPrependReplace, zxr10RMAPSetAspathRowStatus RowStatus } zxr10RMAPSetAspathName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetAspathEntry 1 } zxr10RMAPSetAspathSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetAspathEntry 2 } zxr10RMAPSetAspathAsnd1 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "AS number. The range of config is 1 to 4294967295." ::= { zxr10RMAPSetAspathEntry 3 } zxr10RMAPSetAspathAsnd2 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "AS number. The range of config is 1 to 4294967295." ::= { zxr10RMAPSetAspathEntry 4 } zxr10RMAPSetAspathAsnd3 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "AS number. The range of config is 1 to 4294967295." ::= { zxr10RMAPSetAspathEntry 5 } zxr10RMAPSetAspathAsnd4 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "AS number. The range of config is 1 to 4294967295." ::= { zxr10RMAPSetAspathEntry 6 } zxr10RMAPSetAspathAsnd5 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "AS number. The range of config is 1 to 4294967295." ::= { zxr10RMAPSetAspathEntry 7 } zxr10RMAPSetAspathAsnd6 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "AS number. The range of config is 1 to 4294967295." ::= { zxr10RMAPSetAspathEntry 8 } zxr10RMAPSetAspathAsnd7 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "AS number. The range of config is 1 to 4294967295." ::= { zxr10RMAPSetAspathEntry 9 } zxr10RMAPSetAspathAsnd8 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "AS number. The range of config is 1 to 4294967295." ::= { zxr10RMAPSetAspathEntry 10 } zxr10RMAPSetAspathAsnd9 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "AS number. The range of config is 1 to 4294967295." ::= { zxr10RMAPSetAspathEntry 11 } zxr10RMAPSetAspathAsnd10 OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "AS number. The range of config is 1 to 4294967295." ::= { zxr10RMAPSetAspathEntry 12 } zxr10RMAPSetAspathPrepOrRep OBJECT-TYPE SYNTAX RmapPrependReplace MAX-ACCESS read-create STATUS current DESCRIPTION "Set aspath prepend or replace,prepend is 1,replace is 2" ::= { zxr10RMAPSetAspathEntry 13 } zxr10RMAPSetAspathRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetAspathEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetCommunityConstTable -------------------------------------------------------------- zxr10RMAPSetCommunityConstTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetCommunityConstEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set Community Table" ::= { zxr10RMAPRuleObjects 18 } zxr10RMAPSetCommunityConstEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetCommunityConstEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set BGP community attribute. The value of config includes: internet Internet(Well known community) no-advertise Do not advertise to any peer no-export Do not export to next AS no-export-subconfed Do not send outside local AS none No community attribute. If set community none has been setted, other types of set community can't be setted. If set community has been setted with attribute addtive, other configs of set community can't be setted without attribute addtive." INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPSetCommIsAddtive, zxr10RMAPSetCommConstVal} ::= { zxr10RMAPSetCommunityConstTable 1 } Zxr10RMAPSetCommunityConstEntry ::=SEQUENCE { zxr10RMAPSetCommName DisplayString, zxr10RMAPSetCommSequence Integer32, zxr10RMAPSetCommIsAddtive RmapSetComm, zxr10RMAPSetCommConstVal RmapSetComm, zxr10RMAPSetCommConstRowStatus RowStatus } zxr10RMAPSetCommName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetCommunityConstEntry 1 } zxr10RMAPSetCommSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Sequence of Route-map. The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetCommunityConstEntry 2 } zxr10RMAPSetCommIsAddtive OBJECT-TYPE SYNTAX RmapSetComm MAX-ACCESS not-accessible STATUS current DESCRIPTION "additive Add to the existing community. Value is 5. none No community attribute. Value is 6." ::= { zxr10RMAPSetCommunityConstEntry 3 } zxr10RMAPSetCommConstVal OBJECT-TYPE SYNTAX RmapSetComm MAX-ACCESS not-accessible STATUS current DESCRIPTION "internet Internet(Well known community). Value is 4. no-advertise Do not advertise to any peer. Value is 2. no-export Do not export to next AS. Value is 1. no-export-subconfed Do not send outside local AS. Value is 3." ::= { zxr10RMAPSetCommunityConstEntry 4 } zxr10RMAPSetCommConstRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetCommunityConstEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetCommunityAsnnTable -------------------------------------------------------------- zxr10RMAPSetCommunityAsnnTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetCommunityAsnnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set Community Table" ::= { zxr10RMAPRuleObjects 19 } zxr10RMAPSetCommunityAsnnEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetCommunityAsnnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set BGP community attribute in aa:nn format. If set community has been setted with attribute addtive, other configs of set community can't be setted without attribute addtive. If zxr10RMAPSetCommAsnn is setted with value 0:0 , the config will transform to config of set community internet. If zxr10RMAPSetCommAsnn is setted with value 0:X , the config will transform to config of set community X in uint format. If zxr10RMAPSetCommUint is setted with value 65535:65281, the config will transform to config of set community no-export. If zxr10RMAPSetCommUint is setted with value 65535:65282, the config will transform to config of set community no-advertise. If zxr10RMAPSetCommUint is setted with value 65535:65283, the config will transform to config of set community no-export-subconfed." INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPSetCommAsnnIsAddtive, zxr10RMAPSetCommAsnn} ::= { zxr10RMAPSetCommunityAsnnTable 1 } Zxr10RMAPSetCommunityAsnnEntry ::=SEQUENCE { zxr10RMAPSetCommAsnnName DisplayString, zxr10RMAPSetCommAsnnSequence Integer32, zxr10RMAPSetCommAsnnIsAddtive RmapSetComm, zxr10RMAPSetCommAsnn DisplayString, zxr10RMAPSetCommAsnnRowStatus RowStatus } zxr10RMAPSetCommAsnnName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetCommunityAsnnEntry 1 } zxr10RMAPSetCommAsnnSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetCommunityAsnnEntry 2 } zxr10RMAPSetCommAsnnIsAddtive OBJECT-TYPE SYNTAX RmapSetComm MAX-ACCESS not-accessible STATUS current DESCRIPTION "additive Add to the existing community. Value is 5." ::= { zxr10RMAPSetCommunityAsnnEntry 3 } zxr10RMAPSetCommAsnn OBJECT-TYPE SYNTAX DisplayString(SIZE(1..12)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Community number in aa:nn format. The range of aa is 0 to 65535. The range of nn is 0 to 65535. The ASCII code of : is 58. The ASCII code from 1 to 9 is 49 to 57." ::= { zxr10RMAPSetCommunityAsnnEntry 4 } zxr10RMAPSetCommAsnnRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetCommunityAsnnEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetCommunityUintTable -------------------------------------------------------------- zxr10RMAPSetCommunityUintTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetCommunityUintEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set Community Table" ::= { zxr10RMAPRuleObjects 20 } zxr10RMAPSetCommunityUintEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetCommunityUintEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set BGP community attribute in Unsigned32 format. If set community has been setted with addtive attribute, other configs of set community can't be setted without addtive attribute. If zxr10RMAPSetCommUint is setted with value which is larger than 65535, the config will transform to config of set community X:Y in ASNN format. For example,set community 65536 will transform to set community 1:1. If zxr10RMAPSetCommUint is setted with value 4294967041, the config will transform to config of set community no-export. If zxr10RMAPSetCommUint is setted with value 4294967042, the config will transform to config of set community no-advertise. If zxr10RMAPSetCommUint is setted with value 4294967043, the config will transform to config of set community no-export-subconfed." INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPSetCommUintIsAddtive, zxr10RMAPSetCommUint} ::= { zxr10RMAPSetCommunityUintTable 1 } Zxr10RMAPSetCommunityUintEntry ::=SEQUENCE { zxr10RMAPSetCommUintName DisplayString, zxr10RMAPSetCommUintSequence Integer32, zxr10RMAPSetCommUintIsAddtive RmapSetComm, zxr10RMAPSetCommUint Unsigned32, zxr10RMAPSetCommUintRowStatus RowStatus } zxr10RMAPSetCommUintName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetCommunityUintEntry 1 } zxr10RMAPSetCommUintSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetCommunityUintEntry 2 } zxr10RMAPSetCommUintIsAddtive OBJECT-TYPE SYNTAX RmapSetComm MAX-ACCESS not-accessible STATUS current DESCRIPTION "additive Add to the existing community. Value is 5." ::= { zxr10RMAPSetCommunityUintEntry 3 } zxr10RMAPSetCommUint OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Community number in unsigned32 format. The range of config is 1 to 4294967295." ::= { zxr10RMAPSetCommunityUintEntry 4 } zxr10RMAPSetCommUintRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetCommunityUintEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetDampeningTable -------------------------------------------------------------- zxr10RMAPSetDampeningTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetDampeningEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set Dampening Table" ::= { zxr10RMAPRuleObjects 21 } zxr10RMAPSetDampeningEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetDampeningEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set BGP route flap dampening parameters" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetDampeningTable 1 } Zxr10RMAPSetDampeningEntry ::=SEQUENCE { zxr10RMAPSetDampeningName DisplayString, zxr10RMAPSetDampeningSequence Integer32, zxr10RMAPSetDampeningHalfLife Integer32, zxr10RMAPSetDampeningReuse Integer32, zxr10RMAPSetDampeningSuppress Integer32, zxr10RMAPSetDampeningMaxSupTime Integer32, zxr10RMAPSetDampeningRowStatus RowStatus } zxr10RMAPSetDampeningName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetDampeningEntry 1 } zxr10RMAPSetDampeningSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetDampeningEntry 2 } zxr10RMAPSetDampeningHalfLife OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Half-life time for the penalty. The range of config is 1 to 45. The value for half-life should be smaller than max duration to suppress." ::= { zxr10RMAPSetDampeningEntry 3 } zxr10RMAPSetDampeningReuse OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Penalty to start reusing a route. The range of config is 1 to 20000. The value for reusing should be smaller than the value for suppressing." ::= { zxr10RMAPSetDampeningEntry 4 } zxr10RMAPSetDampeningSuppress OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Penalty to start suppressing a route. The range of config is 1 to 20000. The value for suppressing should be larger than the value for reusing." ::= { zxr10RMAPSetDampeningEntry 5 } zxr10RMAPSetDampeningMaxSupTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum duration to suppress a stable route. The range of config is 1 to 255. The value for max duration to suppress should be larger than half-life." ::= { zxr10RMAPSetDampeningEntry 6 } zxr10RMAPSetDampeningRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetDampeningEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetDscpTable -------------------------------------------------------------- zxr10RMAPSetDscpTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetDscpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set Dscp Table" ::= { zxr10RMAPRuleObjects 22 } zxr10RMAPSetDscpEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetDscpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set DSCP for PBR. This set item conflicts with these items below: set ip precedence set ip tos set ipv6 precedence set ipv6 traffic-class" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetDscpTable 1 } Zxr10RMAPSetDscpEntry ::=SEQUENCE { zxr10RMAPSetDscpName DisplayString, zxr10RMAPSetDscpSequence Integer32, zxr10RMAPSetDscp Integer32, zxr10RMAPSetDscpRowStatus RowStatus } zxr10RMAPSetDscpName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetDscpEntry 1 } zxr10RMAPSetDscpSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetDscpEntry 2 } zxr10RMAPSetDscp OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Type of service value. The range of config is 0 to 63. 255 is invalid value." ::= { zxr10RMAPSetDscpEntry 3 } zxr10RMAPSetDscpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetDscpEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetRtTable -------------------------------------------------------------- zxr10RMAPSetRtTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetRtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set Rt Table" ::= { zxr10RMAPRuleObjects 23 } zxr10RMAPSetRtEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetRtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set Transitive Route Target extended community. If set extcommunity rt-trans remove has been setted, other types of set extcommunity can't be setted. If set extcommunity rt-trans has been setted with addtive attribute, other configs of set extcommunity rt-trans can't be setted without addtive attribute." INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPSetRtAsnn, zxr10RMAPSetRtReOrAdd} ::= { zxr10RMAPSetRtTable 1 } Zxr10RMAPSetRtEntry ::=SEQUENCE { zxr10RMAPSetRtName DisplayString, zxr10RMAPSetRtSequence Integer32, zxr10RMAPSetRtAsnn DisplayString, zxr10RMAPSetRtReOrAdd RmapSetRt, zxr10RMAPSetRtRowStatus RowStatus } zxr10RMAPSetRtName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetRtEntry 1 } zxr10RMAPSetRtSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetRtEntry 2 } zxr10RMAPSetRtAsnn OBJECT-TYPE SYNTAX DisplayString(SIZE(1..12)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VPN extended community. This config includes 3 formats. 1.ASNN(X:Y) The range of X is 0 to 65535. The range of X is 0 to 4294967295. 2.ASNDot(X.Y:Z) The range of X is 1 to 65535. The range of Y is 0 to 65535. The range of Z is 0 to 65535. 3.ASNIp(A.B.C.D:X) The range of X is 0 to 65535. The ASCII code of . is 46. The ASCII code of : is 58. The ASCII code from 1 to 9 is 49 to 57." ::= { zxr10RMAPSetRtEntry 3 } zxr10RMAPSetRtReOrAdd OBJECT-TYPE SYNTAX RmapSetRt MAX-ACCESS not-accessible STATUS current DESCRIPTION "additive Add to the existing extcommunity.Value is 6. remove Remove the existing extcommunity.Value is 7." ::= { zxr10RMAPSetRtEntry 4 } zxr10RMAPSetRtRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetRtEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetSooTable -------------------------------------------------------------- zxr10RMAPSetSooTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetSooEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set Soo Table" ::= { zxr10RMAPRuleObjects 24 } zxr10RMAPSetSooEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetSooEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Transitive Site-of-Origin extended community. If set extcommunity soo-trans remove has been setted, other types of set extcommunity can't be setted. The ASCII code of . is 46. The ASCII code of : is 58. The ASCII code from 1 to 9 is 49 to 57." INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetSooTable 1 } Zxr10RMAPSetSooEntry ::=SEQUENCE { zxr10RMAPSetSooName DisplayString, zxr10RMAPSetSooSequence Integer32, zxr10RMAPSetSooAsnn DisplayString, zxr10RMAPSetSooRemove RmapSetRt, zxr10RMAPSetSooRowStatus RowStatus } zxr10RMAPSetSooName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetSooEntry 1 } zxr10RMAPSetSooSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetSooEntry 2 } zxr10RMAPSetSooAsnn OBJECT-TYPE SYNTAX DisplayString(SIZE(1..12)) MAX-ACCESS read-create STATUS current DESCRIPTION "VPN extended community. This config includes 3 formats. 1.ASNN(X:Y) The range of X is 0 to 65535. The range of X is 0 to 4294967295. 2.ASNDot(X.Y:Z) The range of X is 1 to 65535. The range of Y is 0 to 65535. The range of Z is 0 to 65535. 3.ASNIp(A.B.C.D:X) The range of X is 0 to 65535." ::= { zxr10RMAPSetSooEntry 3 } zxr10RMAPSetSooRemove OBJECT-TYPE SYNTAX RmapSetRt MAX-ACCESS read-create STATUS current DESCRIPTION "Remove the existing extcommunity.Value is 7" ::= { zxr10RMAPSetSooEntry 4 } zxr10RMAPSetSooRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetSooEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetGlobalTable -------------------------------------------------------------- zxr10RMAPSetGlobalTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetGlobalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set Global Table" ::= { zxr10RMAPRuleObjects 25 } zxr10RMAPSetGlobalEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetGlobalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set global route for PBR. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. It conflicts with these set items below: set interface set ip next-hop set ipv6 next-hop set next-hop set ip path set ipv6 path set vrf " INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetGlobalTable 1 } Zxr10RMAPSetGlobalEntry ::=SEQUENCE { zxr10RMAPSetGlobalName DisplayString, zxr10RMAPSetGlobalSequence Integer32, zxr10RMAPSetGlobal TruthValue, zxr10RMAPSetGlobalIPAddr IpAddress, zxr10RMAPSetGlobalIpConst RmapSetGlobalIpConst, zxr10RMAPSetGlobalNextHopConst RmapSetGlobalNextHopConst, zxr10RMAPSetGlobalRowStatus RowStatus } zxr10RMAPSetGlobalName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetGlobalEntry 1 } zxr10RMAPSetGlobalSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetGlobalEntry 2 } zxr10RMAPSetGlobal OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "It expresses that whether this config is setted or not." ::= { zxr10RMAPSetGlobalEntry 3 } zxr10RMAPSetGlobalIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP address of next hop. This attribut may be setted or not. 0 is invaid value." ::= { zxr10RMAPSetGlobalEntry 4 } zxr10RMAPSetGlobalIpConst OBJECT-TYPE SYNTAX RmapSetGlobalIpConst MAX-ACCESS read-create STATUS current DESCRIPTION "If zxr10RMAPSetGlobalIPAddr is setted, this attribut should be setted with value 3" ::= { zxr10RMAPSetGlobalEntry 5 } zxr10RMAPSetGlobalNextHopConst OBJECT-TYPE SYNTAX RmapSetGlobalNextHopConst MAX-ACCESS read-create STATUS current DESCRIPTION "If zxr10RMAPSetGlobalIPAddr is setted, this attribut should be setted with value 1" ::= { zxr10RMAPSetGlobalEntry 6 } zxr10RMAPSetGlobalRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetGlobalEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetInterfaceTable -------------------------------------------------------------- zxr10RMAPSetInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set Interface Table" ::= { zxr10RMAPRuleObjects 26 } zxr10RMAPSetInterfaceEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set output interface. Each sequence has 10 set interface items at most. This set item supports these types of interface: [PORT-CLASS-OC, PORT-TYPE-OC48] [PORT-TYPE-OC192, PORT-CLASS-OC-END] PORT-TYPE-NULL PORT-TYPE-TE-TUNNEL PORT-TYPE-GRE-TUNNEL PORT-TYPE-OC3-C-E1 PORT-TYPE-OC3-C-E1-TS PORT-TYPE-E1-C-TS [PORT-TYPE-DIALER,PORT-TYPE-DIALER]. It conflicts with these set items below: set vrf set global " INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPSetInterface} ::= { zxr10RMAPSetInterfaceTable 1 } Zxr10RMAPSetInterfaceEntry ::=SEQUENCE { zxr10RMAPSetInterfaceName DisplayString, zxr10RMAPSetInterfaceSequence Integer32, zxr10RMAPSetInterface DisplayString, zxr10RMAPSetInterfaceRowStatus RowStatus } zxr10RMAPSetInterfaceName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetInterfaceEntry 1 } zxr10RMAPSetInterfaceSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetInterfaceEntry 2 } zxr10RMAPSetInterface OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface Name. Each sequence has 10 set interface items at most." ::= { zxr10RMAPSetInterfaceEntry 3 } zxr10RMAPSetInterfaceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetInterfaceEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetIpMetricTable -------------------------------------------------------------- zxr10RMAPSetIpMetricTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetIpMetricEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set IpMetric Table" ::= { zxr10RMAPRuleObjects 27 } zxr10RMAPSetIpMetricEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetIpMetricEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set metric value for destination routing protocol. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type." INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetIpMetricTable 1 } Zxr10RMAPSetIpMetricEntry ::=SEQUENCE { zxr10RMAPSetIpMetricName DisplayString, zxr10RMAPSetIpMetricSequence Integer32, zxr10RMAPSetIpMetricAct RmapSetMetricAct, zxr10RMAPSetIpMetricValue Unsigned32, zxr10RMAPSetIpMetricRowStatus RowStatus } zxr10RMAPSetIpMetricName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetIpMetricEntry 1 } zxr10RMAPSetIpMetricSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetIpMetricEntry 2 } zxr10RMAPSetIpMetricAct OBJECT-TYPE SYNTAX RmapSetMetricAct MAX-ACCESS read-create STATUS current DESCRIPTION "plus :Add metric.Value is 1. minus:Del metric.Value is 2. unset:No Action.Value is 0." ::= { zxr10RMAPSetIpMetricEntry 3 } zxr10RMAPSetIpMetricValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Metric value. The range of config is 0 to 4294967295" ::= { zxr10RMAPSetIpMetricEntry 4 } zxr10RMAPSetIpMetricRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetIpMetricEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetIpMetricTypeTable -------------------------------------------------------------- zxr10RMAPSetIpMetricTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetIpMetricTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set IpMetricType Table" ::= { zxr10RMAPRuleObjects 28 } zxr10RMAPSetIpMetricTypeEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetIpMetricTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set type of metric for destination routing protocol. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type." INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetIpMetricTypeTable 1 } Zxr10RMAPSetIpMetricTypeEntry ::=SEQUENCE { zxr10RMAPSetIpMetricTypeName DisplayString, zxr10RMAPSetIpMetricTypeSequence Integer32, zxr10RMAPSetIpMetricType RmapSetMetricType, zxr10RMAPSetIpMetricTypeRowStat RowStatus } zxr10RMAPSetIpMetricTypeName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetIpMetricTypeEntry 1 } zxr10RMAPSetIpMetricTypeSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetIpMetricTypeEntry 2 } zxr10RMAPSetIpMetricType OBJECT-TYPE SYNTAX RmapSetMetricType MAX-ACCESS read-create STATUS current DESCRIPTION "external IS-IS external metric.Value is 2. internal IS-IS internal metric.Value is 1. type-1 OSPF external type 1 metric.Value is 3. type-2 OSPF external type 2 metric.Value is 4. 0 is invalid value." ::= { zxr10RMAPSetIpMetricTypeEntry 3 } zxr10RMAPSetIpMetricTypeRowStat OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetIpMetricTypeEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetIpNextHopTable -------------------------------------------------------------- zxr10RMAPSetIpNextHopTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetIpNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set IpNextHop Table" ::= { zxr10RMAPRuleObjects 29 } zxr10RMAPSetIpNextHopEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetIpNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set Next hop address. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. It conflicts with these set items below: set vrf set global" INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPSetIpNextHop} ::= { zxr10RMAPSetIpNextHopTable 1 } Zxr10RMAPSetIpNextHopEntry ::=SEQUENCE { zxr10RMAPSetIpNextHopName DisplayString, zxr10RMAPSetIpNextHopSequence Integer32, zxr10RMAPSetIpNextHop IpAddress, zxr10RMAPSetIpNextHopSqa DisplayString, zxr10RMAPSetIpNextHopRowStatus RowStatus } zxr10RMAPSetIpNextHopName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetIpNextHopEntry 1 } zxr10RMAPSetIpNextHopSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetIpNextHopEntry 2 } zxr10RMAPSetIpNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP address of next hop. 0 is invalid value. Each sequence has 10 set ip next-hop items at most." ::= { zxr10RMAPSetIpNextHopEntry 3 } zxr10RMAPSetIpNextHopSqa OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "Track name. This attribut may be setted or not." ::= { zxr10RMAPSetIpNextHopEntry 4 } zxr10RMAPSetIpNextHopRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetIpNextHopEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetIpPathTable -------------------------------------------------------------- zxr10RMAPSetIpPathTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetIpPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set IpPath Table" ::= { zxr10RMAPRuleObjects 30 } zxr10RMAPSetIpPathEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetIpPathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set output interface. This set item supports these types of interface: [PORT-CLASS-FEI,PORT-CLASS-GEI-END]. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. It conflicts with these set items below: set vrf set global" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetIpPathTable 1 } Zxr10RMAPSetIpPathEntry ::=SEQUENCE { zxr10RMAPIpPathName DisplayString, zxr10RMAPIpPathSequence Integer32, zxr10RMAPSetIpPathIntf DisplayString, zxr10RMAPSetIpPathNextHop IpAddress, zxr10RMAPSetIpPathRowStatus RowStatus } zxr10RMAPIpPathName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetIpPathEntry 1 } zxr10RMAPIpPathSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetIpPathEntry 2 } zxr10RMAPSetIpPathIntf OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of Interface (1-31 characters)" ::= { zxr10RMAPSetIpPathEntry 3 } zxr10RMAPSetIpPathNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP address of next hop.0 is invalid value." ::= { zxr10RMAPSetIpPathEntry 4 } zxr10RMAPSetIpPathRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetIpPathEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetIpPrecTable -------------------------------------------------------------- zxr10RMAPSetIpPrecTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetIpPrecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set IpPrec Table" ::= { zxr10RMAPRuleObjects 31 } zxr10RMAPSetIpPrecEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetIpPrecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set precedence field. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. It conflicts with these set items below: set dscp. If zxr10RMAPSetIpPrec is getted with value 255, it expresses this config is invalid." INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetIpPrecTable 1 } Zxr10RMAPSetIpPrecEntry ::=SEQUENCE { zxr10RMAPSetIpPrecName DisplayString, zxr10RMAPSetIpPrecSequence Integer32, zxr10RMAPSetIpPrec Integer32, zxr10RMAPSetIpPrecMap RmapSetPrec, zxr10RMAPSetIpPrecRowStatus RowStatus } zxr10RMAPSetIpPrecName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetIpPrecEntry 1 } zxr10RMAPSetIpPrecSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetIpPrecEntry 2 } zxr10RMAPSetIpPrec OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Precedence value. The range of config is 0 to 7. 255 is invalid value. If zxr10RMAPSetIpPrec is setted with valid value, zxr10RMAPSetIpPrecMap should be setted with 255." ::= { zxr10RMAPSetIpPrecEntry 3 } zxr10RMAPSetIpPrecMap OBJECT-TYPE SYNTAX RmapSetPrec MAX-ACCESS read-create STATUS current DESCRIPTION "critical Set critical precedence (6) flash Set flash precedence (4) flash-override Set flash override precedence (5) immediate Set immediate precedence (3) internet Set internetwork control precedence (7) network Set network control precedence (8) priority Set priority precedence (2) routine Set routine precedence (1) 255 is invalid value. If zxr10RMAPSetIpPrecMap is setted with valid value, zxr10RMAPSetIpPrec should be setted with 255." ::= { zxr10RMAPSetIpPrecEntry 4 } zxr10RMAPSetIpPrecRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetIpPrecEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetIpTagTable -------------------------------------------------------------- zxr10RMAPSetIpTagTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetIpTagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set IpTag Table" ::= { zxr10RMAPRuleObjects 32 } zxr10RMAPSetIpTagEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetIpTagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set tag value for destination routing protocol. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type." INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetIpTagTable 1 } Zxr10RMAPSetIpTagEntry ::=SEQUENCE { zxr10RMAPSetIpTagName DisplayString, zxr10RMAPSetIpTagSequence Integer32, zxr10RMAPSetIpTag Unsigned32, zxr10RMAPSetIpTagRowStatus RowStatus } zxr10RMAPSetIpTagName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetIpTagEntry 1 } zxr10RMAPSetIpTagSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetIpTagEntry 2 } zxr10RMAPSetIpTag OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Set tag value for destination routing protocol. The range of config is 0 to 4294967295." ::= { zxr10RMAPSetIpTagEntry 3 } zxr10RMAPSetIpTagRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetIpTagEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetIpTosTable -------------------------------------------------------------- zxr10RMAPSetIpTosTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetIpTosEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set IpTos Table" ::= { zxr10RMAPRuleObjects 33 } zxr10RMAPSetIpTosEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetIpTosEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set type of service field. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. It conflicts with these set items below: set dscp" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetIpTosTable 1 } Zxr10RMAPSetIpTosEntry ::=SEQUENCE { zxr10RMAPSetIpTosName DisplayString, zxr10RMAPSetIpTosSequence Integer32, zxr10RMAPSetIpTos Integer32, zxr10RMAPSetIpTosMap RmapSetTos, zxr10RMAPSetIpTosRowStatus RowStatus } zxr10RMAPSetIpTosName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetIpTosEntry 1 } zxr10RMAPSetIpTosSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetIpTosEntry 2 } zxr10RMAPSetIpTos OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Type of service value. The range of config is 0 to 15. 255 is invalid value. If zxr10RMAPSetIpTos is setted with valid value, zxr10RMAPSetIpTosMap should be setted with 255." ::= { zxr10RMAPSetIpTosEntry 3 } zxr10RMAPSetIpTosMap OBJECT-TYPE SYNTAX RmapSetTos MAX-ACCESS read-create STATUS current DESCRIPTION "max-reliability Set max reliable TOS (3) max-throughput Set max throughput TOS (4) min-delay Set min delay TOS (5) min-monetary-cost Set min monetary cost TOS (2) normal Set normal TOS (1) 255 is invalid value. If zxr10RMAPSetIpTosMap is setted with valid value, zxr10RMAPSetIpTos should be setted with 255." ::= { zxr10RMAPSetIpTosEntry 4 } zxr10RMAPSetIpTosRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetIpTosEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetIpv6MetricTable -------------------------------------------------------------- zxr10RMAPSetIpv6MetricTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetIpv6MetricEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set Ipv6Metric Table" ::= { zxr10RMAPRuleObjects 34 } zxr10RMAPSetIpv6MetricEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetIpv6MetricEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set metric value for destination routing protocol. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type." INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetIpv6MetricTable 1 } Zxr10RMAPSetIpv6MetricEntry ::=SEQUENCE { zxr10RMAPSetIpv6MetricName DisplayString, zxr10RMAPSetIpv6MetricSequence Integer32, zxr10RMAPSetIpv6MetricAct RmapSetMetricAct, zxr10RMAPSetIpv6MetricValue Unsigned32, zxr10RMAPSetIpv6MetricRowStatus RowStatus } zxr10RMAPSetIpv6MetricName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetIpv6MetricEntry 1 } zxr10RMAPSetIpv6MetricSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetIpv6MetricEntry 2 } zxr10RMAPSetIpv6MetricAct OBJECT-TYPE SYNTAX RmapSetMetricAct MAX-ACCESS read-create STATUS current DESCRIPTION "plus :Add metric.Value is 1. minus:Del metric.Value is 2. unset:No Action.Value is 0." ::= { zxr10RMAPSetIpv6MetricEntry 3 } zxr10RMAPSetIpv6MetricValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Metric value. The range of config is 0 to 4294967295." ::= { zxr10RMAPSetIpv6MetricEntry 4 } zxr10RMAPSetIpv6MetricRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetIpv6MetricEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetIpv6MetricTypeTable -------------------------------------------------------------- zxr10RMAPSetIpv6MetricTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetIpv6MetricTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set Ipv6MetricType Table" ::= { zxr10RMAPRuleObjects 35 } zxr10RMAPSetIpv6MetricTypeEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetIpv6MetricTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set type of metric for destination routing protocol. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type." INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetIpv6MetricTypeTable 1 } Zxr10RMAPSetIpv6MetricTypeEntry ::=SEQUENCE { zxr10RMAPSetIpv6MetricTypeName DisplayString, zxr10RMAPSetIpv6MetricTypeSeq Integer32, zxr10RMAPSetIpv6MetricType RmapSetMetricType, zxr10RMAPSetIpv6MetricTypeRowSta RowStatus } zxr10RMAPSetIpv6MetricTypeName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetIpv6MetricTypeEntry 1 } zxr10RMAPSetIpv6MetricTypeSeq OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetIpv6MetricTypeEntry 2 } zxr10RMAPSetIpv6MetricType OBJECT-TYPE SYNTAX RmapSetMetricType MAX-ACCESS read-create STATUS current DESCRIPTION "external IS-IS external metric.Value is 2. internal IS-IS internal metric.Value is 1. type-1 OSPF external type 1 metric.Value is 3. type-2 OSPF external type 2 metric.Value is 4. 0 is invalid value" ::= { zxr10RMAPSetIpv6MetricTypeEntry 3 } zxr10RMAPSetIpv6MetricTypeRowSta OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetIpv6MetricTypeEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetIpv6NextHopTable -------------------------------------------------------------- zxr10RMAPSetIpv6NextHopTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetIpv6NextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set IpNextHop Table" ::= { zxr10RMAPRuleObjects 36 } zxr10RMAPSetIpv6NextHopEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetIpv6NextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set Next hop address. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type. It conflicts with these set items below: set vrf set global" INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPSetIpv6NextHop} ::= { zxr10RMAPSetIpv6NextHopTable 1 } Zxr10RMAPSetIpv6NextHopEntry ::=SEQUENCE { zxr10RMAPSetIpv6NextHopName DisplayString, zxr10RMAPSetIpv6NextHopSequence Integer32, zxr10RMAPSetIpv6NextHop Ipv6Address, zxr10RMAPSetIpv6NextHopRowStatus RowStatus } zxr10RMAPSetIpv6NextHopName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetIpv6NextHopEntry 1 } zxr10RMAPSetIpv6NextHopSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetIpv6NextHopEntry 2 } zxr10RMAPSetIpv6NextHop OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION " IPv6 address of next hop. 0 is invalid value. Each sequence has 10 set ipv6 next-hop items at most." ::= { zxr10RMAPSetIpv6NextHopEntry 3 } zxr10RMAPSetIpv6NextHopRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetIpv6NextHopEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetIpv6PathTable -------------------------------------------------------------- zxr10RMAPSetIpv6PathTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetIpv6PathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set Ipv6Path Table" ::= { zxr10RMAPRuleObjects 37 } zxr10RMAPSetIpv6PathEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetIpv6PathEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set output interface. This set item supports these types of interface: [PORT-CLASS-FEI,PORT-CLASS-GEI-END]. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type. It conflicts with these set items below: set vrf set global" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetIpv6PathTable 1 } Zxr10RMAPSetIpv6PathEntry ::=SEQUENCE { zxr10RMAPSetIpv6PathName DisplayString, zxr10RMAPSetIpv6PathSequence Integer32, zxr10RMAPSetIpv6PathIntf DisplayString, zxr10RMAPSetIpv6PathNextHop Ipv6Address, zxr10RMAPSetIpv6PathRowStatus RowStatus } zxr10RMAPSetIpv6PathName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetIpv6PathEntry 1 } zxr10RMAPSetIpv6PathSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetIpv6PathEntry 2 } zxr10RMAPSetIpv6PathIntf OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of Interface (1-31 characters)" ::= { zxr10RMAPSetIpv6PathEntry 3 } zxr10RMAPSetIpv6PathNextHop OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS read-create STATUS current DESCRIPTION " IPv6 address of next hop.0 is invalid value." ::= { zxr10RMAPSetIpv6PathEntry 4 } zxr10RMAPSetIpv6PathRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetIpv6PathEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetIpv6PrecTable -------------------------------------------------------------- zxr10RMAPSetIpv6PrecTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetIpv6PrecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set Ipv6Prec Table" ::= { zxr10RMAPRuleObjects 38 } zxr10RMAPSetIpv6PrecEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetIpv6PrecEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set precedence field. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type. It conflicts with these set items below: set dscp 255 is invalid value." INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetIpv6PrecTable 1 } Zxr10RMAPSetIpv6PrecEntry ::=SEQUENCE { zxr10RMAPSetIpv6precName DisplayString, zxr10RMAPSetIpv6precSequence Integer32, zxr10RMAPSetIpv6prec Integer32, zxr10RMAPSetIpv6precMap RmapSetPrec, zxr10RMAPSetIpv6precRowStatus RowStatus } zxr10RMAPSetIpv6precName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetIpv6PrecEntry 1 } zxr10RMAPSetIpv6precSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetIpv6PrecEntry 2 } zxr10RMAPSetIpv6prec OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Precedence value. 255 is invalid. The range of config is 0 to 7. If zxr10RMAPSetIpv6prec is setted with valid value, zxr10RMAPSetIpv6precMap should be setted with 255." ::= { zxr10RMAPSetIpv6PrecEntry 3 } zxr10RMAPSetIpv6precMap OBJECT-TYPE SYNTAX RmapSetPrec MAX-ACCESS read-create STATUS current DESCRIPTION "critical Set critical precedence (6) flash Set flash precedence (4) flash-override Set flash override precedence (5) immediate Set immediate precedence (3) internet Set internetwork control precedence (7) network Set network control precedence (8) priority Set priority precedence (2) routine Set routine precedence (1) 255 is invalid value. If zxr10RMAPSetIpv6precMap is setted with valid value, zxr10RMAPSetIpv6prec should be setted with 255." ::= { zxr10RMAPSetIpv6PrecEntry 4 } zxr10RMAPSetIpv6precRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetIpv6PrecEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetIpv6TagTable -------------------------------------------------------------- zxr10RMAPSetIpv6TagTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetIpv6TagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set Ipv6Tag Table" ::= { zxr10RMAPRuleObjects 39 } zxr10RMAPSetIpv6TagEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetIpv6TagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set tag value for destination routing protocol. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type." INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetIpv6TagTable 1 } Zxr10RMAPSetIpv6TagEntry ::=SEQUENCE { zxr10RMAPSetIpv6TagName DisplayString, zxr10RMAPSetIpv6TagSequence Integer32, zxr10RMAPSetIpv6Tag Unsigned32, zxr10RMAPSetIpv6TagRowStatus RowStatus } zxr10RMAPSetIpv6TagName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetIpv6TagEntry 1 } zxr10RMAPSetIpv6TagSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetIpv6TagEntry 2 } zxr10RMAPSetIpv6Tag OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Precedence value. The range of config is 0 to 4294967295." ::= { zxr10RMAPSetIpv6TagEntry 3 } zxr10RMAPSetIpv6TagRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetIpv6TagEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetIpv6TrafficTable -------------------------------------------------------------- zxr10RMAPSetIpv6TrafficTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetIpv6TrafficEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set Ipv6Traffic Table" ::= { zxr10RMAPRuleObjects 40 } zxr10RMAPSetIpv6TrafficEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetIpv6TrafficEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set IPv6 traffic-class. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type. It conflicts with these set items below: set dscp" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetIpv6TrafficTable 1 } Zxr10RMAPSetIpv6TrafficEntry ::=SEQUENCE { zxr10RMAPSetIpv6TrafficName DisplayString, zxr10RMAPSetIpv6TrafficSequence Integer32, zxr10RMAPSetIpv6Traffic Integer32, zxr10RMAPSetIpv6TrafficRowStatus RowStatus } zxr10RMAPSetIpv6TrafficName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetIpv6TrafficEntry 1 } zxr10RMAPSetIpv6TrafficSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetIpv6TrafficEntry 2 } zxr10RMAPSetIpv6Traffic OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Value of IPv6 traffic-class. The range of config is 0 to 255." ::= { zxr10RMAPSetIpv6TrafficEntry 3 } zxr10RMAPSetIpv6TrafficRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetIpv6TrafficEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetLevelTable -------------------------------------------------------------- zxr10RMAPSetLevelTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetLevelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set Level Table" ::= { zxr10RMAPRuleObjects 41 } zxr10RMAPSetLevelEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetLevelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set where to import route" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetLevelTable 1 } Zxr10RMAPSetLevelEntry ::=SEQUENCE { zxr10RMAPSetLevelName DisplayString, zxr10RMAPSetLevelSequence Integer32, zxr10RMAPSetLevel RmapSetLevel, zxr10RMAPSetLevelRowStatus RowStatus } zxr10RMAPSetLevelName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetLevelEntry 1 } zxr10RMAPSetLevelSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetLevelEntry 2 } zxr10RMAPSetLevel OBJECT-TYPE SYNTAX RmapSetLevel MAX-ACCESS read-create STATUS current DESCRIPTION "level-1 Import into a level-1 area.Value is 1. level-1-2 Import into level-1 and level-2.Value is 3. level-2 Import into level-2 sub-domain.Value is 2. 0 is invalid value." ::= { zxr10RMAPSetLevelEntry 3 } zxr10RMAPSetLevelRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetLevelEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetLocalPreTable -------------------------------------------------------------- zxr10RMAPSetLocalPreTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetLocalPreEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set LocalPreference Table" ::= { zxr10RMAPRuleObjects 42 } zxr10RMAPSetLocalPreEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetLocalPreEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set BGP local preference path attribute." INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetLocalPreTable 1 } Zxr10RMAPSetLocalPreEntry ::=SEQUENCE { zxr10RMAPSetLocalPreName DisplayString, zxr10RMAPSetLocalPreSequence Integer32, zxr10RMAPSetLocalPre Unsigned32, zxr10RMAPSetLocalPreRowStatus RowStatus } zxr10RMAPSetLocalPreName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetLocalPreEntry 1 } zxr10RMAPSetLocalPreSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetLocalPreEntry 2 } zxr10RMAPSetLocalPre OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Preference value. The range of config is 0 to 4294967295." ::= { zxr10RMAPSetLocalPreEntry 3 } zxr10RMAPSetLocalPreRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetLocalPreEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetMplsTable -------------------------------------------------------------- zxr10RMAPSetMplsTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetMplsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set Mpls-label Table" ::= { zxr10RMAPRuleObjects 43 } zxr10RMAPSetMplsEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetMplsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set MPLS label for prefix" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetMplsTable 1 } Zxr10RMAPSetMplsEntry ::=SEQUENCE { zxr10RMAPSetMplsName DisplayString, zxr10RMAPSetMplsSequence Integer32, zxr10RMAPSetMpls TruthValue, zxr10RMAPSetMplsRowStatus RowStatus } zxr10RMAPSetMplsName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetMplsEntry 1 } zxr10RMAPSetMplsSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetMplsEntry 2 } zxr10RMAPSetMpls OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Set MPLS label for prefix. It expresses that whether this config is valid or not." ::= { zxr10RMAPSetMplsEntry 3 } zxr10RMAPSetMplsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetMplsEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetNextHopTable -------------------------------------------------------------- zxr10RMAPSetNextHopTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set NextHop Table" ::= { zxr10RMAPRuleObjects 44 } zxr10RMAPSetNextHopEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set IP address of next hop. It conflicts with these set items below: set vrf set global" INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPSetNextHop} ::= { zxr10RMAPSetNextHopTable 1 } Zxr10RMAPSetNextHopEntry ::=SEQUENCE { zxr10RMAPSetNextHopName DisplayString, zxr10RMAPSetNextHopSequence Integer32, zxr10RMAPSetNextHop IpAddress, zxr10RMAPSetNextHopRowStatus RowStatus } zxr10RMAPSetNextHopName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetNextHopEntry 1 } zxr10RMAPSetNextHopSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetNextHopEntry 2 } zxr10RMAPSetNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP address of next hop. 0 is invalid value. Each sequence has 10 set next-hop items at most." ::= { zxr10RMAPSetNextHopEntry 3 } zxr10RMAPSetNextHopRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetNextHopEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetOriginTable -------------------------------------------------------------- zxr10RMAPSetOriginTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetOriginEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set Origin Table" ::= { zxr10RMAPRuleObjects 45 } zxr10RMAPSetOriginEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetOriginEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set BGP origin code" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetOriginTable 1 } Zxr10RMAPSetOriginEntry ::=SEQUENCE { zxr10RMAPSetOriginName DisplayString, zxr10RMAPSetOriginSequence Integer32, zxr10RMAPSetOrigin RmapSetOrigin, zxr10RMAPSetOriginRowStatus RowStatus } zxr10RMAPSetOriginName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetOriginEntry 1 } zxr10RMAPSetOriginSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetOriginEntry 2 } zxr10RMAPSetOrigin OBJECT-TYPE SYNTAX RmapSetOrigin MAX-ACCESS read-create STATUS current DESCRIPTION "egp Remote EGP.Value is 2. igp Local IGP.Value is 1. incomplete Unknown heritage.Value is 3. 0 is invalid value." ::= { zxr10RMAPSetOriginEntry 3 } zxr10RMAPSetOriginRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetOriginEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetQosIdTable -------------------------------------------------------------- zxr10RMAPSetQosIdTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetQosIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set QosId Table" ::= { zxr10RMAPRuleObjects 46 } zxr10RMAPSetQosIdEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetQosIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set QoS ID of routing" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetQosIdTable 1 } Zxr10RMAPSetQosIdEntry ::=SEQUENCE { zxr10RMAPSetQosIdName DisplayString, zxr10RMAPSetQosIdSequence Integer32, zxr10RMAPSetQosId Integer32, zxr10RMAPSetQosIdRowStatus RowStatus } zxr10RMAPSetQosIdName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetQosIdEntry 1 } zxr10RMAPSetQosIdSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetQosIdEntry 2 } zxr10RMAPSetQosId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "QoS ID. The range of config is 1 to 16000. 0 is invalid value." ::= { zxr10RMAPSetQosIdEntry 3 } zxr10RMAPSetQosIdRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetQosIdEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetVrfTable -------------------------------------------------------------- zxr10RMAPSetVrfTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetVrfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set Vrf Table" ::= { zxr10RMAPRuleObjects 47 } zxr10RMAPSetVrfEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetVrfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set virtual route forwarding name. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. It conflicts with these set items below: set interface set ip next-hop set ipv6 next-hop set next-hop set global" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetVrfTable 1 } Zxr10RMAPSetVrfEntry ::=SEQUENCE { zxr10RMAPSetVrfName DisplayString, zxr10RMAPSetVrfSequence Integer32, zxr10RMAPSetVrf DisplayString, zxr10RMAPSetVrfNextHop IpAddress, zxr10RMAPSetVrfSqa DisplayString, zxr10RMAPSetVrfIpConst RmapSetVrfIpConst, zxr10RMAPSetVrfNextHopConst RmapSetVrfNextHopConst, zxr10RMAPSetVrfRowStatus RowStatus } zxr10RMAPSetVrfName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetVrfEntry 1 } zxr10RMAPSetVrfSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetVrfEntry 2 } zxr10RMAPSetVrf OBJECT-TYPE SYNTAX DisplayString(SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Virtual route forwarding name" ::= { zxr10RMAPSetVrfEntry 3 } zxr10RMAPSetVrfNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP address of next hop. 0 is invalid value. This attribut may be setted or not." ::= { zxr10RMAPSetVrfEntry 4 } zxr10RMAPSetVrfSqa OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "Track name. This attribut may be setted or not." ::= { zxr10RMAPSetVrfEntry 5 } zxr10RMAPSetVrfIpConst OBJECT-TYPE SYNTAX RmapSetVrfIpConst MAX-ACCESS read-create STATUS current DESCRIPTION "If zxr10RMAPSetVrfNextHop is setted, this attribute should be setted with value 1." ::= { zxr10RMAPSetVrfEntry 6 } zxr10RMAPSetVrfNextHopConst OBJECT-TYPE SYNTAX RmapSetVrfNextHopConst MAX-ACCESS read-create STATUS current DESCRIPTION "If zxr10RMAPSetVrfNextHop is setted, this attribute should be setted with value 2." ::= { zxr10RMAPSetVrfEntry 7 } zxr10RMAPSetVrfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetVrfEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchAsLenTable -------------------------------------------------------------- zxr10RMAPMatchAsLenTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchAsLenEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Match As-path-length Table" ::= { zxr10RMAPRuleObjects 48 } zxr10RMAPMatchAsLenEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchAsLenEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match BGP as-path-length" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPMatchAsLenTable 1 } Zxr10RMAPMatchAsLenEntry ::=SEQUENCE { zxr10RMAPMatchAsLenName DisplayString, zxr10RMAPMatchAsLenSequence Integer32, zxr10RMAPMatchAsLenAlg RmapMatchAlg, zxr10RMAPMatchAsLen Integer32, zxr10RMAPMatchAsLenRowStatus RowStatus } zxr10RMAPMatchAsLenName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPMatchAsLenEntry 1 } zxr10RMAPMatchAsLenSequence OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchAsLenEntry 2 } zxr10RMAPMatchAsLenAlg OBJECT-TYPE SYNTAX RmapMatchAlg MAX-ACCESS read-create STATUS current DESCRIPTION "eq Equal as-path length to be matched.Value is 1. ge Minimum as-path length to be matched.Value is 2. le Maximun as-path length to be matched.Value is 3." ::= { zxr10RMAPMatchAsLenEntry 3 } zxr10RMAPMatchAsLen OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "As-path length. The range of config is 0 to 255." ::= { zxr10RMAPMatchAsLenEntry 4 } zxr10RMAPMatchAsLenRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPMatchAsLenEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchAsUnqLenTable -------------------------------------------------------------- zxr10RMAPMatchAsUnqLenTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchAsUnqLenEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Match As-path-unique-length Table" ::= { zxr10RMAPRuleObjects 49 } zxr10RMAPMatchAsUnqLenEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchAsUnqLenEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match BGP as-path-unique-length" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPMatchAsUnqLenTable 1 } Zxr10RMAPMatchAsUnqLenEntry ::=SEQUENCE { zxr10RMAPMatchAsUnqLenName DisplayString, zxr10RMAPMatchAsUnqLenSequence Integer32, zxr10RMAPMatchAsUnqLenAlg RmapMatchAlg, zxr10RMAPMatchAsUnqLen Integer32, zxr10RMAPMatchAsUnqLenRowStatus RowStatus } zxr10RMAPMatchAsUnqLenName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPMatchAsUnqLenEntry 1 } zxr10RMAPMatchAsUnqLenSequence OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchAsUnqLenEntry 2 } zxr10RMAPMatchAsUnqLenAlg OBJECT-TYPE SYNTAX RmapMatchAlg MAX-ACCESS read-create STATUS current DESCRIPTION "eq Equal as-path length to be matched.Value is 1. ge Minimum as-path length to be matched.Value is 2. le Maximun as-path length to be matched.Value is 3." ::= { zxr10RMAPMatchAsUnqLenEntry 3 } zxr10RMAPMatchAsUnqLen OBJECT-TYPE SYNTAX Integer32(0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "As-path unique length. The range of config is 0 to 255." ::= { zxr10RMAPMatchAsUnqLenEntry 4 } zxr10RMAPMatchAsUnqLenRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPMatchAsUnqLenEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchIpSourceAclTable -------------------------------------------------------------- zxr10RMAPMatchIpSourceAclTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchIpSourceAclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Match IpSource Table(match ip source by acl)." ::= { zxr10RMAPRuleObjects 50 } zxr10RMAPMatchIpSourceAclEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchIpSourceAclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match source ip address of route or match packet. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. Otherwise, It conflicts with the item that match ip source by pfl. If zxr10RMAPsourceIsConfigAcl is true,it expresses that this config is match ip source by acl." INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPSourceAclName, zxr10RMAPSourceIsConfigAcl} ::= { zxr10RMAPMatchIpSourceAclTable 1 } Zxr10RMAPMatchIpSourceAclEntry ::=SEQUENCE { zxr10RMAPMatchSourceAclName DisplayString, zxr10RMAPMatchSourceAclSequence Integer32, zxr10RMAPSourceAclName DisplayString, zxr10RMAPSourceIsConfigAcl TruthValue, zxr10RMAPMatchSourceAclRowStatus RowStatus } zxr10RMAPMatchSourceAclName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPMatchIpSourceAclEntry 1 } zxr10RMAPMatchSourceAclSequence OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchIpSourceAclEntry 2 } zxr10RMAPSourceAclName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of an access-list(1-31 characters). Each sequence has 10 match ip source items at most." ::= { zxr10RMAPMatchIpSourceAclEntry 3 } zxr10RMAPSourceIsConfigAcl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "It expresses that this config is match ip source by acl." ::= { zxr10RMAPMatchIpSourceAclEntry 4 } zxr10RMAPMatchSourceAclRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPMatchIpSourceAclEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchIpSourcePflTable -------------------------------------------------------------- zxr10RMAPMatchIpSourcePflTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchIpSourcePflEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Match IpSource Table(match ip source by pfl)" ::= { zxr10RMAPRuleObjects 51 } zxr10RMAPMatchIpSourcePflEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchIpSourcePflEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match Source ip address of route or match packet. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type. Otherwise, It conflicts with the item that match ip source by acl." INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPSourcePflName, zxr10RMAPSourceIsConfigPfl} ::= { zxr10RMAPMatchIpSourcePflTable 1 } Zxr10RMAPMatchIpSourcePflEntry ::=SEQUENCE { zxr10RMAPMatchSourcePflName DisplayString, zxr10RMAPMatchSourcePflSequence Integer32, zxr10RMAPSourcePflName DisplayString, zxr10RMAPSourceIsConfigPfl TruthValue, zxr10RMAPMatchSourcePflRowStatus RowStatus } zxr10RMAPMatchSourcePflName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPMatchIpSourcePflEntry 1 } zxr10RMAPMatchSourcePflSequence OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchIpSourcePflEntry 2 } zxr10RMAPSourcePflName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of a prefix list (1-31 characters). Each sequence has 10 match ip source items at most." ::= { zxr10RMAPMatchIpSourcePflEntry 3 } zxr10RMAPSourceIsConfigPfl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "It expresses that this config is match ip source by pfl." ::= { zxr10RMAPMatchIpSourcePflEntry 4 } zxr10RMAPMatchSourcePflRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPMatchIpSourcePflEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchLocalPrefTable -------------------------------------------------------------- zxr10RMAPMatchLocalPrefTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchLocalPrefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Match local-preference Table" ::= { zxr10RMAPRuleObjects 52 } zxr10RMAPMatchLocalPrefEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchLocalPrefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match BGP local preference path attribute" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPMatchLocalPrefTable 1 } Zxr10RMAPMatchLocalPrefEntry ::=SEQUENCE { zxr10RMAPMatchLocalPrefName DisplayString, zxr10RMAPMatchLocalPrefSequence Integer32, zxr10RMAPMatchLocalPrefAlg RmapMatchAlg, zxr10RMAPMatchLocalPref Unsigned32, zxr10RMAPMatchLocalPrefRowStatus RowStatus } zxr10RMAPMatchLocalPrefName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPMatchLocalPrefEntry 1 } zxr10RMAPMatchLocalPrefSequence OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchLocalPrefEntry 2 } zxr10RMAPMatchLocalPrefAlg OBJECT-TYPE SYNTAX RmapMatchAlg MAX-ACCESS read-create STATUS current DESCRIPTION "eq Equal as-path length to be matched.Value is 1. ge Minimum as-path length to be matched.Value is 2. le Maximun as-path length to be matched.Value is 3." ::= { zxr10RMAPMatchLocalPrefEntry 3 } zxr10RMAPMatchLocalPref OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "Preference value. The range of config is 0 to 4294967295." ::= { zxr10RMAPMatchLocalPrefEntry 4 } zxr10RMAPMatchLocalPrefRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPMatchLocalPrefEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchOriginTable -------------------------------------------------------------- zxr10RMAPMatchOriginTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchOriginEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Match Origin Table" ::= { zxr10RMAPRuleObjects 53 } zxr10RMAPMatchOriginEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchOriginEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match BGP origin code" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPMatchOriginTable 1 } Zxr10RMAPMatchOriginEntry ::=SEQUENCE { zxr10RMAPMatchOriginName DisplayString, zxr10RMAPMatchOriginSequence Integer32, zxr10RMAPMatchOrigin RmapSetOrigin, zxr10RMAPMatchOriginRowStatus RowStatus } zxr10RMAPMatchOriginName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPMatchOriginEntry 1 } zxr10RMAPMatchOriginSequence OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchOriginEntry 2 } zxr10RMAPMatchOrigin OBJECT-TYPE SYNTAX RmapSetOrigin MAX-ACCESS read-create STATUS current DESCRIPTION "egp Remote EGP.Value is 2. igp Local IGP.Value is 1. incomplete Unknown heritage.Value is 3. 0 is invalid value." ::= { zxr10RMAPMatchOriginEntry 3 } zxr10RMAPMatchOriginRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPMatchOriginEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetPathSelTable -------------------------------------------------------------- zxr10RMAPSetPathSelTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetPathSelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set Path-selection Table" ::= { zxr10RMAPRuleObjects 54 } zxr10RMAPSetPathSelEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetPathSelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set BGP path-selection" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetPathSelTable 1 } Zxr10RMAPSetPathSelEntry ::=SEQUENCE { zxr10RMAPSetPathSelName DisplayString, zxr10RMAPSetPathSelSequence Integer32, zxr10RMAPSetPathSelPath RmapSetPath, zxr10RMAPSetPathSelNum Integer32, zxr10RMAPSetPathSelInstall RmapSetPathInstall, zxr10RMAPSetPathSelMulpro RmapSetPathMulpro, zxr10RMAPSetPathSelAdvertise RmapSetPathAdvertise, zxr10RMAPSetPathSelRowStatus RowStatus } zxr10RMAPSetPathSelName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetPathSelEntry 1 } zxr10RMAPSetPathSelSequence OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetPathSelEntry 2 } zxr10RMAPSetPathSelPath OBJECT-TYPE SYNTAX RmapSetPath MAX-ACCESS read-create STATUS current DESCRIPTION "all Path for imitating iBGP full-mesh.Value is 1. backup Path for rapid convergence.Value is 2. best-path Path for load sharing.Value is 3. group-best Path for elimination of routing oscillation.Value is 4." ::= { zxr10RMAPSetPathSelEntry 3 } zxr10RMAPSetPathSelNum OBJECT-TYPE SYNTAX Integer32(1..32) MAX-ACCESS read-create STATUS current DESCRIPTION "Path numbers. The range of config is 1 to 32." ::= { zxr10RMAPSetPathSelEntry 4 } zxr10RMAPSetPathSelInstall OBJECT-TYPE SYNTAX RmapSetPathInstall MAX-ACCESS read-create STATUS current DESCRIPTION "Manner of sending to forwarding table." ::= { zxr10RMAPSetPathSelEntry 5 } zxr10RMAPSetPathSelMulpro OBJECT-TYPE SYNTAX RmapSetPathMulpro MAX-ACCESS read-create STATUS current DESCRIPTION "Manner of sending to forwarding table." ::= { zxr10RMAPSetPathSelEntry 6 } zxr10RMAPSetPathSelAdvertise OBJECT-TYPE SYNTAX RmapSetPathAdvertise MAX-ACCESS read-create STATUS current DESCRIPTION "Advertising the path selected outward." ::= { zxr10RMAPSetPathSelEntry 7 } zxr10RMAPSetPathSelRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetPathSelEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetPolicyPrioTable -------------------------------------------------------------- zxr10RMAPSetPolicyPrioTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetPolicyPrioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set Policy-priority Table" ::= { zxr10RMAPRuleObjects 55 } zxr10RMAPSetPolicyPrioEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetPolicyPrioEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set policy priority for PBR" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetPolicyPrioTable 1 } Zxr10RMAPSetPolicyPrioEntry ::=SEQUENCE { zxr10RMAPSetPolicyPrioName DisplayString, zxr10RMAPSetPolicyPrioSequence Integer32, zxr10RMAPSetPolicyPrio Integer32, zxr10RMAPSetPolicyPrioRowStatus RowStatus } zxr10RMAPSetPolicyPrioName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetPolicyPrioEntry 1 } zxr10RMAPSetPolicyPrioSequence OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetPolicyPrioEntry 2 } zxr10RMAPSetPolicyPrio OBJECT-TYPE SYNTAX Integer32(0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "Value of policy priority. The range of config is 0 to 7." ::= { zxr10RMAPSetPolicyPrioEntry 3 } zxr10RMAPSetPolicyPrioRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetPolicyPrioEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchIpAlgMetricTable -------------------------------------------------------------- zxr10RMAPMatchIpAlgMetricTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchIpAlgMetricEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Match Ip Metric Table" ::= { zxr10RMAPRuleObjects 56 } zxr10RMAPMatchIpAlgMetricEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchIpAlgMetricEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match address of route or match packet. This match item sets the route-map with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 type." INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPMatchIpAlgMetricTable 1 } Zxr10RMAPMatchIpAlgMetricEntry ::=SEQUENCE { zxr10RMAPMatchIpAlgMetricName DisplayString, zxr10RMAPMatchIpAlgMetricSeq Integer32, zxr10RMAPMatchIpAlgMetricAlg RmapMatchAlg, zxr10RMAPMatchIpAlgMetric Unsigned32, zxr10RMAPIpAlgMetricRowStatus RowStatus } zxr10RMAPMatchIpAlgMetricName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPMatchIpAlgMetricEntry 1 } zxr10RMAPMatchIpAlgMetricSeq OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchIpAlgMetricEntry 2 } zxr10RMAPMatchIpAlgMetricAlg OBJECT-TYPE SYNTAX RmapMatchAlg MAX-ACCESS read-create STATUS current DESCRIPTION "eq Equal matric length to be matched.Value is 1. ge Minimum matric length to be matched.Value is 2. le Maximun matric length to be matched.Value is 3." ::= { zxr10RMAPMatchIpAlgMetricEntry 3 } zxr10RMAPMatchIpAlgMetric OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "Metric value. The range of config is 0 to 4294967295." ::= { zxr10RMAPMatchIpAlgMetricEntry 4 } zxr10RMAPIpAlgMetricRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPMatchIpAlgMetricEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchIpv6AlgMetricTable -------------------------------------------------------------- zxr10RMAPMatchIpv6AlgMetricTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchIpv6AlgMetricEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Match Ipv6 Metric Table" ::= { zxr10RMAPRuleObjects 57 } zxr10RMAPMatchIpv6AlgMetricEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchIpv6AlgMetricEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match address of route or match packet. This match item sets the route-map with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type." INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPMatchIpv6AlgMetricTable 1 } Zxr10RMAPMatchIpv6AlgMetricEntry ::=SEQUENCE { zxr10RMAPMatchIpv6AlgMetricName DisplayString, zxr10RMAPMatchIpv6AlgMetricSeq Integer32, zxr10RMAPMatchIpv6AlgMetricAlg RmapMatchAlg, zxr10RMAPMatchIpv6AlgMetric Unsigned32, zxr10RMAPIpv6AlgMetricRowStatus RowStatus } zxr10RMAPMatchIpv6AlgMetricName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPMatchIpv6AlgMetricEntry 1 } zxr10RMAPMatchIpv6AlgMetricSeq OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchIpv6AlgMetricEntry 2 } zxr10RMAPMatchIpv6AlgMetricAlg OBJECT-TYPE SYNTAX RmapMatchAlg MAX-ACCESS read-create STATUS current DESCRIPTION "eq Equal matric length to be matched.Value is 1. ge Minimum matric length to be matched.Value is 2. le Maximun matric length to be matched.Value is 3." ::= { zxr10RMAPMatchIpv6AlgMetricEntry 3 } zxr10RMAPMatchIpv6AlgMetric OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "Metric value. The range of config is 0 to 4294967295." ::= { zxr10RMAPMatchIpv6AlgMetricEntry 4 } zxr10RMAPIpv6AlgMetricRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPMatchIpv6AlgMetricEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetTraffIdxTable -------------------------------------------------------------- zxr10RMAPSetTraffIdxTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetTraffIdxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set Traffic-index Table" ::= { zxr10RMAPRuleObjects 58 } zxr10RMAPSetTraffIdxEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetTraffIdxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set BGP traffic index" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetTraffIdxTable 1 } Zxr10RMAPSetTraffIdxEntry ::=SEQUENCE { zxr10RMAPSetTraffIdxName DisplayString, zxr10RMAPSetTraffIdxSequence Integer32, zxr10RMAPSetTraffIdx Integer32, zxr10RMAPSetTraffIdxRowStatus RowStatus } zxr10RMAPSetTraffIdxName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetTraffIdxEntry 1 } zxr10RMAPSetTraffIdxSequence OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetTraffIdxEntry 2 } zxr10RMAPSetTraffIdx OBJECT-TYPE SYNTAX Integer32(1..32) MAX-ACCESS read-create STATUS current DESCRIPTION "Traffic-index number. The range of config is 1 to 63." ::= { zxr10RMAPSetTraffIdxEntry 3 } zxr10RMAPSetTraffIdxRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetTraffIdxEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetNextHopPeerAddrTable -------------------------------------------------------------- zxr10RMAPSetNextHopPeerAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetNextHopPeerAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set NextHop Table" ::= { zxr10RMAPRuleObjects 60 } zxr10RMAPSetNextHopPeerAddrEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetNextHopPeerAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set IP address of next hop. It conflicts with these set items below: set vrf set global" INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPSetNextHopAddr, zxr10RMAPSetNextHopPeerAddr} ::= { zxr10RMAPSetNextHopPeerAddrTable 1 } Zxr10RMAPSetNextHopPeerAddrEntry ::=SEQUENCE { zxr10RMAPSetNextHopPeerAddrName DisplayString, zxr10RMAPSetNextHopPeerAddrSeq Integer32, zxr10RMAPSetNextHopAddr IpAddress, zxr10RMAPSetNextHopPeerAddr Integer32, zxr10RMAPSetNHorPeerAddRowStatus RowStatus } zxr10RMAPSetNextHopPeerAddrName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetNextHopPeerAddrEntry 1 } zxr10RMAPSetNextHopPeerAddrSeq OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetNextHopPeerAddrEntry 2 } zxr10RMAPSetNextHopAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP address of next hop. 0 is invalid value. Each sequence has 10 set next-hop items at most." ::= { zxr10RMAPSetNextHopPeerAddrEntry 3 } zxr10RMAPSetNextHopPeerAddr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Peer address for BGP." ::= { zxr10RMAPSetNextHopPeerAddrEntry 4 } zxr10RMAPSetNHorPeerAddRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetNextHopPeerAddrEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetIpv6NHorPeerAddTable -------------------------------------------------------------- zxr10RMAPSetIpv6NHorPeerAddTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetIpv6NHorPeerAddEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set IpNextHop Table" ::= { zxr10RMAPRuleObjects 61 } zxr10RMAPSetIpv6NHorPeerAddEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetIpv6NHorPeerAddEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set Next hop address. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type. It conflicts with these set items below: set vrf set global" INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPSetIpv6NextHopAddr, zxr10RMAPSetIpv6NextHopPeerAddr} ::= { zxr10RMAPSetIpv6NHorPeerAddTable 1 } Zxr10RMAPSetIpv6NHorPeerAddEntry ::=SEQUENCE { zxr10RMAPSetIpv6NHorPeerAddName DisplayString, zxr10RMAPSetIpv6NHorPeerAddSeq Integer32, zxr10RMAPSetIpv6NextHopAddr Ipv6Address, zxr10RMAPSetIpv6NextHopPeerAddr Integer32, zxr10RMAPSetv6NHorPeerRowStatus RowStatus } zxr10RMAPSetIpv6NHorPeerAddName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetIpv6NHorPeerAddEntry 1 } zxr10RMAPSetIpv6NHorPeerAddSeq OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetIpv6NHorPeerAddEntry 2 } zxr10RMAPSetIpv6NextHopAddr OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION " IPv6 address of next hop. 0 is invalid value. Each sequence has 10 set ipv6 next-hop items at most." ::= { zxr10RMAPSetIpv6NHorPeerAddEntry 3 } zxr10RMAPSetIpv6NextHopPeerAddr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Peer address for BGP." ::= { zxr10RMAPSetIpv6NHorPeerAddEntry 4 } zxr10RMAPSetv6NHorPeerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetIpv6NHorPeerAddEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchEvpnTable -------------------------------------------------------------- zxr10RMAPMatchEvpnTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchEvpnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map match EVPN table" ::= { zxr10RMAPRuleObjects 62 } zxr10RMAPMatchEvpnEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchEvpnEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Match BGP EVPN route" INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPMatchEvpn} ::= { zxr10RMAPMatchEvpnTable 1 } Zxr10RMAPMatchEvpnEntry ::=SEQUENCE { zxr10RMAPMatchEvpnName DisplayString, zxr10RMAPMatchEvpnSequence Integer32, zxr10RMAPMatchEvpn Integer32, zxr10RMAPMatchEvpnRowStatus RowStatus } zxr10RMAPMatchEvpnName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of route-map (1-31 characters)" ::= { zxr10RMAPMatchEvpnEntry 1 } zxr10RMAPMatchEvpnSequence OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchEvpnEntry 2 } zxr10RMAPMatchEvpn OBJECT-TYPE SYNTAX Integer32(1..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "EVPN route type. 1: Ethernet Auto-Discovery (A-D) route; 2: MAC/IP Advertisement route; 3: Inclusive Multicast Ethernet Tag route; 4: Ethernet Segment route; 5: IP Prefix route." ::= { zxr10RMAPMatchEvpnEntry 3 } zxr10RMAPMatchEvpnRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status" ::= { zxr10RMAPMatchEvpnEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPBlackHoleRouteTable -------------------------------------------------------------- zxr10RMAPBlackHoleRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPBlackHoleRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map black hole route table" ::= { zxr10RMAPRuleObjects 63 } zxr10RMAPBlackHoleRouteEntry OBJECT-TYPE SYNTAX Zxr10RMAPBlackHoleRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Black hole route which outcoming interface is null." INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPBlackHoleRouteTable 1 } Zxr10RMAPBlackHoleRouteEntry ::=SEQUENCE { zxr10RMAPBlackHoleRouteName DisplayString, zxr10RMAPBlackHoleRouteSequence Integer32, zxr10RMAPBlackHoleRouteEnable INTEGER, zxr10RMAPBlackHoleRouteRowStatus RowStatus } zxr10RMAPBlackHoleRouteName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of route-map (1-31 characters)" ::= { zxr10RMAPBlackHoleRouteEntry 1 } zxr10RMAPBlackHoleRouteSequence OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPBlackHoleRouteEntry 2 } zxr10RMAPBlackHoleRouteEnable OBJECT-TYPE SYNTAX INTEGER {false(255),true(1)} MAX-ACCESS read-create STATUS current DESCRIPTION "Black hole route enable." ::= { zxr10RMAPBlackHoleRouteEntry 3 } zxr10RMAPBlackHoleRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status" ::= { zxr10RMAPBlackHoleRouteEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPDefaultRouteTable -------------------------------------------------------------- zxr10RMAPDefaultRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPDefaultRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map default route table" ::= { zxr10RMAPRuleObjects 64 } zxr10RMAPDefaultRouteEntry OBJECT-TYPE SYNTAX Zxr10RMAPDefaultRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Default route" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPDefaultRouteTable 1 } Zxr10RMAPDefaultRouteEntry ::=SEQUENCE { zxr10RMAPDefaultRouteName DisplayString, zxr10RMAPDefaultRouteSequence Integer32, zxr10RMAPDefaultRouteEnable INTEGER, zxr10RMAPDefaultRouteRowStatus RowStatus } zxr10RMAPDefaultRouteName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of route-map (1-31 characters)" ::= { zxr10RMAPDefaultRouteEntry 1 } zxr10RMAPDefaultRouteSequence OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPDefaultRouteEntry 2 } zxr10RMAPDefaultRouteEnable OBJECT-TYPE SYNTAX INTEGER {false(255),true(1)} MAX-ACCESS read-create STATUS current DESCRIPTION "Default route enable." ::= { zxr10RMAPDefaultRouteEntry 3 } zxr10RMAPDefaultRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status" ::= { zxr10RMAPDefaultRouteEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPStrictPolicyTable -------------------------------------------------------------- zxr10RMAPStrictPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPStrictPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map strict policy table" ::= { zxr10RMAPRuleObjects 65 } zxr10RMAPStrictPolicyEntry OBJECT-TYPE SYNTAX Zxr10RMAPStrictPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Strict policy" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPStrictPolicyTable 1 } Zxr10RMAPStrictPolicyEntry ::=SEQUENCE { zxr10RMAPStrictPolicyName DisplayString, zxr10RMAPStrictPolicySequence Integer32, zxr10RMAPStrictPolicyEnable INTEGER, zxr10RMAPStrictPolicyRowStatus RowStatus } zxr10RMAPStrictPolicyName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of route-map (1-31 characters)" ::= { zxr10RMAPStrictPolicyEntry 1 } zxr10RMAPStrictPolicySequence OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPStrictPolicyEntry 2 } zxr10RMAPStrictPolicyEnable OBJECT-TYPE SYNTAX INTEGER {false(255),true(1)} MAX-ACCESS read-create STATUS current DESCRIPTION "Strict policy enable." ::= { zxr10RMAPStrictPolicyEntry 3 } zxr10RMAPStrictPolicyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status" ::= { zxr10RMAPStrictPolicyEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetPathListTable -------------------------------------------------------------- zxr10RMAPSetPathListTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetPathListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map set IPv4 path list table" ::= { zxr10RMAPRuleObjects 66 } zxr10RMAPSetPathListEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetPathListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set output interfaces. This set item supports these types of interface: [PORT-CLASS-FEI,PORT-CLASS-GEI-END]. This set item sets the route-map name with IPv4 type. It conflicts with other match or set items which set the route-map name with IPv6 type and zxr10RMAPSetIpPathListTable. It conflicts with these set items below: set vrf set global" INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPSetPathListIntf, zxr10RMAPSetPathListNextHop} ::= { zxr10RMAPSetPathListTable 1 } Zxr10RMAPSetPathListEntry ::=SEQUENCE { zxr10RMAPSetPathListName DisplayString, zxr10RMAPSetPathListSequence Integer32, zxr10RMAPSetPathListIntf DisplayString, zxr10RMAPSetPathListNextHop IpAddress, zxr10RMAPSetPathListRowStatus RowStatus } zxr10RMAPSetPathListName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of route-map (1-31 characters)" ::= { zxr10RMAPSetPathListEntry 1 } zxr10RMAPSetPathListSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetPathListEntry 2 } zxr10RMAPSetPathListIntf OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of interface (1-31 characters)" ::= { zxr10RMAPSetPathListEntry 3 } zxr10RMAPSetPathListNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "IP address of next hop.0 is invalid value." ::= { zxr10RMAPSetPathListEntry 4 } zxr10RMAPSetPathListRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status" ::= { zxr10RMAPSetPathListEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetPathList6Table -------------------------------------------------------------- zxr10RMAPSetPathList6Table OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetPathList6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map set Ipv6 path list table" ::= { zxr10RMAPRuleObjects 67 } zxr10RMAPSetPathList6Entry OBJECT-TYPE SYNTAX Zxr10RMAPSetPathList6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set output interface. This set item supports these types of interface: [PORT-CLASS-FEI,PORT-CLASS-GEI-END]. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 type and zxr10RMAPSetIpv6PathTable. It conflicts with these set items below: set vrf set global" INDEX { zxr10RMAPName, zxr10RMAPSequence, zxr10RMAPSetPathList6Intf, zxr10RMAPSetPathList6NextHop} ::= { zxr10RMAPSetPathList6Table 1 } Zxr10RMAPSetPathList6Entry ::=SEQUENCE { zxr10RMAPSetPathList6Name DisplayString, zxr10RMAPSetPathList6Sequence Integer32, zxr10RMAPSetPathList6Intf DisplayString, zxr10RMAPSetPathList6NextHop Ipv6Address, zxr10RMAPSetPathList6RowStatus RowStatus } zxr10RMAPSetPathList6Name OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of route-map (1-31 characters)" ::= { zxr10RMAPSetPathList6Entry 1 } zxr10RMAPSetPathList6Sequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetPathList6Entry 2 } zxr10RMAPSetPathList6Intf OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of interface (1-31 characters)" ::= { zxr10RMAPSetPathList6Entry 3 } zxr10RMAPSetPathList6NextHop OBJECT-TYPE SYNTAX Ipv6Address MAX-ACCESS not-accessible STATUS current DESCRIPTION " IPv6 address of next hop.0 is invalid value." ::= { zxr10RMAPSetPathList6Entry 4 } zxr10RMAPSetPathList6RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status" ::= { zxr10RMAPSetPathList6Entry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetVxlanTunnelSrcTable -------------------------------------------------------------- zxr10RMAPSetVxlanTunnelSrcTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetVxlanTunnelSrcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map set VXLAN tunnel source table" ::= { zxr10RMAPRuleObjects 68 } zxr10RMAPSetVxlanTunnelSrcEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetVxlanTunnelSrcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map set VXLAN tunnel source entry" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetVxlanTunnelSrcTable 1 } Zxr10RMAPSetVxlanTunnelSrcEntry ::=SEQUENCE { zxr10RMAPSetVxlanTunnelSrcName DisplayString, zxr10RMAPSetVxlanTunnelSrcSeq Integer32, zxr10RMAPSetVxlanTunnelSrcAddr IpAddress, zxr10RMAPVxlanTunnelSrcRowStatus RowStatus } zxr10RMAPSetVxlanTunnelSrcName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of route-map (1-31 characters)" ::= { zxr10RMAPSetVxlanTunnelSrcEntry 1 } zxr10RMAPSetVxlanTunnelSrcSeq OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetVxlanTunnelSrcEntry 2 } zxr10RMAPSetVxlanTunnelSrcAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP address of VXLAN tunnel source." ::= { zxr10RMAPSetVxlanTunnelSrcEntry 3 } zxr10RMAPVxlanTunnelSrcRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status" ::= { zxr10RMAPSetVxlanTunnelSrcEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetEvpnMacIntfTable -------------------------------------------------------------- zxr10RMAPSetEvpnMacIntfTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetEvpnMacIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map set EVPN router's MAC interface table" ::= { zxr10RMAPRuleObjects 69 } zxr10RMAPSetEvpnMacIntfEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetEvpnMacIntfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map set EVPN router's MAC interface entry" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetEvpnMacIntfTable 1 } Zxr10RMAPSetEvpnMacIntfEntry ::=SEQUENCE { zxr10RMAPSetEvpnMacIntfName DisplayString, zxr10RMAPSetEvpnMacIntfSequence Integer32, zxr10RMAPSetEvpnMacIntf DisplayString, zxr10RMAPSetEvpnMacIntfRowStatus RowStatus } zxr10RMAPSetEvpnMacIntfName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of route-map (1-31 characters)" ::= { zxr10RMAPSetEvpnMacIntfEntry 1 } zxr10RMAPSetEvpnMacIntfSequence OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetEvpnMacIntfEntry 2 } zxr10RMAPSetEvpnMacIntf OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of interface (1-31 characters)" ::= { zxr10RMAPSetEvpnMacIntfEntry 3 } zxr10RMAPSetEvpnMacIntfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status" ::= { zxr10RMAPSetEvpnMacIntfEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetL2vniLabelTable -------------------------------------------------------------- zxr10RMAPSetL2vniLabelTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetL2vniLabelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map set l2-vni label table" ::= { zxr10RMAPRuleObjects 70 } zxr10RMAPSetL2vniLabelEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetL2vniLabelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map set l2-vni label entry" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetL2vniLabelTable 1 } Zxr10RMAPSetL2vniLabelEntry ::=SEQUENCE { zxr10RMAPSetL2vniLabelName DisplayString, zxr10RMAPSetL2vniLabelSequence Integer32, zxr10RMAPSetL2vniLabel Integer32, zxr10RMAPSetL2vniLabelRowStatus RowStatus } zxr10RMAPSetL2vniLabelName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of route-map (1-31 characters)" ::= { zxr10RMAPSetL2vniLabelEntry 1 } zxr10RMAPSetL2vniLabelSequence OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetL2vniLabelEntry 2 } zxr10RMAPSetL2vniLabel OBJECT-TYPE SYNTAX Integer32(1..16777215) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of l2-vni label." ::= { zxr10RMAPSetL2vniLabelEntry 3 } zxr10RMAPSetL2vniLabelRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status" ::= { zxr10RMAPSetL2vniLabelEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetL3vniLabelTable -------------------------------------------------------------- zxr10RMAPSetL3vniLabelTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetL3vniLabelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map set l3-vni label table" ::= { zxr10RMAPRuleObjects 71 } zxr10RMAPSetL3vniLabelEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetL3vniLabelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map set l3-vni label entry" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPSetL3vniLabelTable 1 } Zxr10RMAPSetL3vniLabelEntry ::=SEQUENCE { zxr10RMAPSetL3vniLabelName DisplayString, zxr10RMAPSetL3vniLabelSequence Integer32, zxr10RMAPSetL3vniLabel Integer32, zxr10RMAPSetL3vniLabelRowStatus RowStatus } zxr10RMAPSetL3vniLabelName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of route-map (1-31 characters)" ::= { zxr10RMAPSetL3vniLabelEntry 1 } zxr10RMAPSetL3vniLabelSequence OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetL3vniLabelEntry 2 } zxr10RMAPSetL3vniLabel OBJECT-TYPE SYNTAX Integer32(1..16777215) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of l3-vni label." ::= { zxr10RMAPSetL3vniLabelEntry 3 } zxr10RMAPSetL3vniLabelRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status" ::= { zxr10RMAPSetL3vniLabelEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchL3VniLabelTable -------------------------------------------------------------- zxr10RMAPMatchL3VniLabelTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchL3VniLabelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map match l3-vni label table" ::= { zxr10RMAPRuleObjects 72 } zxr10RMAPMatchL3VniLabelEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchL3VniLabelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map match l3-vni label entry" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPMatchL3VniLabelTable 1 } Zxr10RMAPMatchL3VniLabelEntry ::=SEQUENCE { zxr10RMAPMatchL3VniLabelName DisplayString, zxr10RMAPMatchL3VniLabelSequence Integer32, zxr10RMAPMatchL3VniLabel Integer32, zxr10RMAPMatchL3VniLabelStatus RowStatus } zxr10RMAPMatchL3VniLabelName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of route-map (1-31 characters)" ::= { zxr10RMAPMatchL3VniLabelEntry 1 } zxr10RMAPMatchL3VniLabelSequence OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchL3VniLabelEntry 2 } zxr10RMAPMatchL3VniLabel OBJECT-TYPE SYNTAX Integer32(1..16777215) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of l3-vni label." ::= { zxr10RMAPMatchL3VniLabelEntry 3 } zxr10RMAPMatchL3VniLabelStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status" ::= { zxr10RMAPMatchL3VniLabelEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchL2VniLabelTable -------------------------------------------------------------- zxr10RMAPMatchL2VniLabelTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchL2VniLabelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map match l2-vni label table" ::= { zxr10RMAPRuleObjects 73 } zxr10RMAPMatchL2VniLabelEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchL2VniLabelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map match l2-vni label entry" INDEX { zxr10RMAPName, zxr10RMAPSequence} ::= { zxr10RMAPMatchL2VniLabelTable 1 } Zxr10RMAPMatchL2VniLabelEntry ::=SEQUENCE { zxr10RMAPMatchL2VniLabelName DisplayString, zxr10RMAPMatchL2VniLabelSequence Integer32, zxr10RMAPMatchL2VniLabel Integer32, zxr10RMAPMatchL2VniLabelStatus RowStatus } zxr10RMAPMatchL2VniLabelName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of route-map (1-31 characters)" ::= { zxr10RMAPMatchL2VniLabelEntry 1 } zxr10RMAPMatchL2VniLabelSequence OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchL2VniLabelEntry 2 } zxr10RMAPMatchL2VniLabel OBJECT-TYPE SYNTAX Integer32(1..16777215) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of l2-vni label." ::= { zxr10RMAPMatchL2VniLabelEntry 3 } zxr10RMAPMatchL2VniLabelStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status" ::= { zxr10RMAPMatchL2VniLabelEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchPlyRtIdTable -------------------------------------------------------------- zxr10RMAPMatchPlyRtIdTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchPlyRtIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map match policy-route-id table" ::= { zxr10RMAPRuleObjects 74 } zxr10RMAPMatchPlyRtIdEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchPlyRtIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map match policy-route-id entry" INDEX { zxr10RMAPMatchPlyRtIdName, zxr10RMAPMatchPlyRtIdSequence, zxr10RMAPMatchPlyRtId, zxr10RMAPMatchPlyRtIdDeriction} ::= { zxr10RMAPMatchPlyRtIdTable 1 } Zxr10RMAPMatchPlyRtIdEntry ::=SEQUENCE { zxr10RMAPMatchPlyRtIdName DisplayString, zxr10RMAPMatchPlyRtIdSequence Integer32, zxr10RMAPMatchPlyRtId Integer32, zxr10RMAPMatchPlyRtIdDeriction INTEGER, zxr10RMAPMatchPlyRtIdStatus RowStatus } zxr10RMAPMatchPlyRtIdName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of route-map (1-31 characters)" ::= { zxr10RMAPMatchPlyRtIdEntry 1 } zxr10RMAPMatchPlyRtIdSequence OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchPlyRtIdEntry 2 } zxr10RMAPMatchPlyRtId OBJECT-TYPE SYNTAX Integer32(1..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of policy-route-id." ::= { zxr10RMAPMatchPlyRtIdEntry 3 } zxr10RMAPMatchPlyRtIdDeriction OBJECT-TYPE SYNTAX INTEGER {distination (1), source (2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The deriction of policy-route-id." ::= { zxr10RMAPMatchPlyRtIdEntry 4 } zxr10RMAPMatchPlyRtIdStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status" ::= { zxr10RMAPMatchPlyRtIdEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPMatchIpv6PlyRtIdTable -------------------------------------------------------------- zxr10RMAPMatchIpv6PlyRtIdTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPMatchIpv6PlyRtIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map match ipv6 policy-route-id table" ::= { zxr10RMAPRuleObjects 75 } zxr10RMAPMatchIpv6PlyRtIdEntry OBJECT-TYPE SYNTAX Zxr10RMAPMatchIpv6PlyRtIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map match ipv6 policy-route-id entry" INDEX { zxr10RMAPMatchIpv6PlyRtIdName, zxr10RMAPMatchIpv6PlyRtIdSeq, zxr10RMAPMatchIpv6PlyRtId, zxr10RMAPMatchIpv6PlyRtIdDerict} ::= { zxr10RMAPMatchIpv6PlyRtIdTable 1 } Zxr10RMAPMatchIpv6PlyRtIdEntry ::=SEQUENCE { zxr10RMAPMatchIpv6PlyRtIdName DisplayString, zxr10RMAPMatchIpv6PlyRtIdSeq Integer32, zxr10RMAPMatchIpv6PlyRtId Integer32, zxr10RMAPMatchIpv6PlyRtIdDerict INTEGER, zxr10RMAPMatchIpv6PlyRtIdStatus RowStatus } zxr10RMAPMatchIpv6PlyRtIdName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of route-map (1-31 characters)" ::= { zxr10RMAPMatchIpv6PlyRtIdEntry 1 } zxr10RMAPMatchIpv6PlyRtIdSeq OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPMatchIpv6PlyRtIdEntry 2 } zxr10RMAPMatchIpv6PlyRtId OBJECT-TYPE SYNTAX Integer32(1..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of policy-route-id." ::= { zxr10RMAPMatchIpv6PlyRtIdEntry 3 } zxr10RMAPMatchIpv6PlyRtIdDerict OBJECT-TYPE SYNTAX INTEGER {distination (1), source (2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The deriction of policy-route-id." ::= { zxr10RMAPMatchIpv6PlyRtIdEntry 4 } zxr10RMAPMatchIpv6PlyRtIdStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status" ::= { zxr10RMAPMatchIpv6PlyRtIdEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetPlyRtIdTable -------------------------------------------------------------- zxr10RMAPSetPlyRtIdTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetPlyRtIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map set policy-route-id table" ::= { zxr10RMAPRuleObjects 76 } zxr10RMAPSetPlyRtIdEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetPlyRtIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map set policy-route-id entry" INDEX { zxr10RMAPSetPlyRtIdName, zxr10RMAPSetPlyRtIdSequence } ::= { zxr10RMAPSetPlyRtIdTable 1 } Zxr10RMAPSetPlyRtIdEntry ::=SEQUENCE { zxr10RMAPSetPlyRtIdName DisplayString, zxr10RMAPSetPlyRtIdSequence Integer32, zxr10RMAPSetPlyRtId Integer32, zxr10RMAPSetPlyRtIdStatus RowStatus } zxr10RMAPSetPlyRtIdName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of route-map (1-31 characters)" ::= { zxr10RMAPSetPlyRtIdEntry 1 } zxr10RMAPSetPlyRtIdSequence OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetPlyRtIdEntry 2 } zxr10RMAPSetPlyRtId OBJECT-TYPE SYNTAX Integer32(1..63) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of policy-route-id." ::= { zxr10RMAPSetPlyRtIdEntry 3 } zxr10RMAPSetPlyRtIdStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status" ::= { zxr10RMAPSetPlyRtIdEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetMonitorGroupIdTable -------------------------------------------------------------- zxr10RMAPSetMonitorGroupIdTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetMonitorGroupIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map set monitor-group-id table" ::= { zxr10RMAPRuleObjects 77 } zxr10RMAPSetMonitorGroupIdEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetMonitorGroupIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map set monitor-group-id entry" INDEX { zxr10RMAPSetMonitorGroupIdName, zxr10RMAPSetMonitorGroupIdSeq } ::= { zxr10RMAPSetMonitorGroupIdTable 1 } Zxr10RMAPSetMonitorGroupIdEntry ::=SEQUENCE { zxr10RMAPSetMonitorGroupIdName DisplayString, zxr10RMAPSetMonitorGroupIdSeq Integer32, zxr10RMAPSetMonitorGroupId Integer32, zxr10RMAPSetMonitorGroupIdStatus RowStatus } zxr10RMAPSetMonitorGroupIdName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of route-map (1-31 characters)" ::= { zxr10RMAPSetMonitorGroupIdEntry 1 } zxr10RMAPSetMonitorGroupIdSeq OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetMonitorGroupIdEntry 2 } zxr10RMAPSetMonitorGroupId OBJECT-TYPE SYNTAX Integer32(1..63) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of policy-route-id." ::= { zxr10RMAPSetMonitorGroupIdEntry 3 } zxr10RMAPSetMonitorGroupIdStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status" ::= { zxr10RMAPSetMonitorGroupIdEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPLoadShareTable -------------------------------------------------------------- zxr10RMAPLoadShareTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPLoadShareEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map load share table" ::= { zxr10RMAPRuleObjects 78 } zxr10RMAPLoadShareEntry OBJECT-TYPE SYNTAX Zxr10RMAPLoadShareEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Load share" INDEX { zxr10RMAPLoadShareName, zxr10RMAPLoadShareSequence } ::= { zxr10RMAPLoadShareTable 1 } Zxr10RMAPLoadShareEntry ::=SEQUENCE { zxr10RMAPLoadShareName DisplayString, zxr10RMAPLoadShareSequence Integer32, zxr10RMAPLoadShareEnable Integer32, zxr10RMAPLoadShareStatus RowStatus } zxr10RMAPLoadShareName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of route-map (1-31 characters)" ::= { zxr10RMAPLoadShareEntry 1 } zxr10RMAPLoadShareSequence OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPLoadShareEntry 2 } zxr10RMAPLoadShareEnable OBJECT-TYPE SYNTAX Integer32(0..1) MAX-ACCESS read-create STATUS current DESCRIPTION "Load share enable." ::= { zxr10RMAPLoadShareEntry 3 } zxr10RMAPLoadShareStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status" ::= { zxr10RMAPLoadShareEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPContinueTable -------------------------------------------------------------- zxr10RMAPContinueTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPContinueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map continue table" ::= { zxr10RMAPRuleObjects 79 } zxr10RMAPContinueEntry OBJECT-TYPE SYNTAX Zxr10RMAPContinueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map continue entry" INDEX { zxr10RMAPContinueName, zxr10RMAPContinueSequence } ::= { zxr10RMAPContinueTable 1 } Zxr10RMAPContinueEntry ::=SEQUENCE { zxr10RMAPContinueName DisplayString, zxr10RMAPContinueSequence Integer32, zxr10RMAPContinue Integer32, zxr10RMAPContinueNext Integer32, zxr10RMAPContinueStatus RowStatus } zxr10RMAPContinueName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of route-map (1-31 characters)" ::= { zxr10RMAPContinueEntry 1 } zxr10RMAPContinueSequence OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPContinueEntry 2 } zxr10RMAPContinue OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of continue sequence." ::= { zxr10RMAPContinueEntry 3 } zxr10RMAPContinueNext OBJECT-TYPE SYNTAX Integer32(0..1) MAX-ACCESS read-create STATUS current DESCRIPTION "Continue next." ::= { zxr10RMAPContinueEntry 4 } zxr10RMAPContinueStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row status" ::= { zxr10RMAPContinueEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPTimeRangeTable -------------------------------------------------------------- zxr10RMAPTimeRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPTimeRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Match IpNextHop Table" ::= { zxr10RMAPRuleObjects 80 } zxr10RMAPTimeRangeEntry OBJECT-TYPE SYNTAX Zxr10RMAPTimeRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map time range." INDEX { zxr10RMAPTimeRangeName, zxr10RMAPTimeRangeSequence } ::= { zxr10RMAPTimeRangeTable 1 } Zxr10RMAPTimeRangeEntry ::=SEQUENCE { zxr10RMAPTimeRangeName DisplayString, zxr10RMAPTimeRangeSequence Integer32, zxr10RMAPTimeRange DisplayString, zxr10RMAPTimeRangeStatus RowStatus } zxr10RMAPTimeRangeName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPTimeRangeEntry 1 } zxr10RMAPTimeRangeSequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPTimeRangeEntry 2 } zxr10RMAPTimeRange OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of time range(1-31 characters)." ::= { zxr10RMAPTimeRangeEntry 3 } zxr10RMAPTimeRangeStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPTimeRangeEntry 100 } -------------------------------------------------------------- -------------------------------------------------------------- --zxr10RMAPSetCommunityNameTable -------------------------------------------------------------- zxr10RMAPSetCommunityNameTable OBJECT-TYPE SYNTAX SEQUENCE OF Zxr10RMAPSetCommunityNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route-map Set Community Table" ::= { zxr10RMAPRuleObjects 81 } zxr10RMAPSetCommunityNameEntry OBJECT-TYPE SYNTAX Zxr10RMAPSetCommunityNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Set BGP community name." INDEX { zxr10RMAPSetCommunityName, zxr10RMAPSetCommunitySequence, zxr10RMAPSetCommunityIsAddtive, zxr10RMAPSetCommunityListName} ::= { zxr10RMAPSetCommunityNameTable 1 } Zxr10RMAPSetCommunityNameEntry ::=SEQUENCE { zxr10RMAPSetCommunityName DisplayString, zxr10RMAPSetCommunitySequence Integer32, zxr10RMAPSetCommunityIsAddtive RmapSetComm, zxr10RMAPSetCommunityListName DisplayString, zxr10RMAPSetCommunityRowStatus RowStatus } zxr10RMAPSetCommunityName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of Route-map (1-31 characters)" ::= { zxr10RMAPSetCommunityNameEntry 1 } zxr10RMAPSetCommunitySequence OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most." ::= { zxr10RMAPSetCommunityNameEntry 2 } zxr10RMAPSetCommunityIsAddtive OBJECT-TYPE SYNTAX RmapSetComm MAX-ACCESS not-accessible STATUS current DESCRIPTION "additive Add to the existing community. Value is 5." ::= { zxr10RMAPSetCommunityNameEntry 3 } zxr10RMAPSetCommunityListName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Community list name (1-31 characters)" ::= { zxr10RMAPSetCommunityNameEntry 4 } zxr10RMAPSetCommunityRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "RowStatus" ::= { zxr10RMAPSetCommunityNameEntry 100 } END