ZXR10-PING-MIB

All MIBs › ZXR10-PING-MIB

Category: ZTE ZXR10 Diagnostics and OAM

Description: Manages ZTE ZXR10 ICMP ping test operations including target configuration, result collection, and round-trip time.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZXR10-PING-MIB?

This MIB belongs to the ZTE ZXR10 platform and models the device's built-in ICMP ping utility as a manageable object, allowing ping tests to be configured and their results collected via SNMP rather than only through the CLI. It exposes objects for configuring ping test parameters (target address, packet count, size) and a results table holding outcomes such as round-trip time, packet loss, and success/failure status. This is primarily a software/network-health monitoring tool: it lets an operator verify reachability and latency to remote hosts programmatically, which is useful for automated network health checks and troubleshooting workflows. It has no strong dependency on other MIBs beyond the standard IP stack of the device, since it directly wraps ICMP echo functionality. It is typically used in service-provider and enterprise network operations centers for scripted or SNMP-driven reachability testing across many ZXR10 devices at once. Engineers can download the ZXR10-PING-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZXR10-PING-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ZTE ZXR10 router/switch

Monitoring Examples

An NMS would write ping-test parameters into the ping information table (destination address, count, timeout) and then poll the corresponding result row for round-trip time and packet-loss statistics. A rising round-trip time or nonzero packet loss for a previously stable target indicates network congestion or a failing path between the ZXR10 device and that destination. Because tests are configured per row, an operator can run many concurrent ping tests to different targets and compare results to isolate whether a problem is local to one path or affects the device broadly.

What Can Be Monitored

ping target configuration
round-trip time
packet loss
test success/failure status

Imported Objects

From RFC1155-SMI

Counter
Gauge
IpAddress
NetworkAddress
mgmt

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
enterprises
experimental

From SNMPv2-TC

MacAddress
RowStatus
TruthValue

From ZXR10-SMI

zxr10L2vpn

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
pingNotifications	1.3.6.1.4.1.3902.3.104.2.3
NTF pingTrapResult	1.3.6.1.4.1.3902.3.104.2.3.1			The newMaster trap indicates that the sending agent has transitioned to 'Master' state.
STR zxr10PingCommExtResultIpAddrInfo	1.3.6.1.4.1.3902.3.104.2.2.1.8	DisplayString	read-only	ip address
STR zxr10PingCommExtResultTimeStampInfo	1.3.6.1.4.1.3902.3.104.2.2.1.7	DisplayString	read-only	timestamp
I32 zxr10PingCommonDataLen	1.3.6.1.4.1.3902.3.104.2.1.1.8	Integer32	read-write	datagram size,default: 100
IP zxr10PingCommonDestAddr	1.3.6.1.4.1.3902.3.104.2.1.1.3	IpAddress	read-write	target IP address
zxr10pingCommonEntry	1.3.6.1.4.1.3902.3.104.2.1.1		not-accessible
STR zxr10PingCommonEntryOwner	1.3.6.1.4.1.3902.3.104.2.1.1.27	DisplayString	read-write	port members
I32 zxr10PingCommonExtFragement	1.3.6.1.4.1.3902.3.104.2.1.1.13	Integer32	read-write	set DONT FRAG(0--may frag,1--don't frag)
IP zxr10PingCommonExtOpIpAddr1	1.3.6.1.4.1.3902.3.104.2.1.1.15	IpAddress	read-write	ip address
IP zxr10PingCommonExtOpIpAddr2	1.3.6.1.4.1.3902.3.104.2.1.1.16	IpAddress	read-write	ip address
IP zxr10PingCommonExtOpIpAddr3	1.3.6.1.4.1.3902.3.104.2.1.1.17	IpAddress	read-write	ip address
IP zxr10PingCommonExtOpIpAddr4	1.3.6.1.4.1.3902.3.104.2.1.1.18	IpAddress	read-write	ip address
IP zxr10PingCommonExtOpIpAddr5	1.3.6.1.4.1.3902.3.104.2.1.1.19	IpAddress	read-write	ip address
IP zxr10PingCommonExtOpIpAddr6	1.3.6.1.4.1.3902.3.104.2.1.1.20	IpAddress	read-write	ip address
IP zxr10PingCommonExtOpIpAddr7	1.3.6.1.4.1.3902.3.104.2.1.1.21	IpAddress	read-write	ip address
IP zxr10PingCommonExtOpIpAddr8	1.3.6.1.4.1.3902.3.104.2.1.1.22	IpAddress	read-write	ip address
IP zxr10PingCommonExtOpIpAddr9	1.3.6.1.4.1.3902.3.104.2.1.1.23	IpAddress	read-write	ip address
I32 zxr10PingCommonExtOpRecordNum	1.3.6.1.4.1.3902.3.104.2.1.1.24	Integer32	read-write	number of hops
I32 zxr10PingCommonExtOpTimestampNum	1.3.6.1.4.1.3902.3.104.2.1.1.25	Integer32	read-write	number of hops
INT zxr10PingCommonExtOpType	1.3.6.1.4.1.3902.3.104.2.1.1.14	INTEGER	read-write	extended commands
IP zxr10PingCommonExtSourceAddr	1.3.6.1.4.1.3902.3.104.2.1.1.10	IpAddress	read-write	source address
I32 zxr10PingCommonExtTos	1.3.6.1.4.1.3902.3.104.2.1.1.11	Integer32	read-write	type of service,default:0
I32 zxr10PingCommonExtTTL	1.3.6.1.4.1.3902.3.104.2.1.1.12	Integer32	read-write	time to live,default:255
INT zxr10PingCommonIfExtOption	1.3.6.1.4.1.3902.3.104.2.1.1.9	INTEGER	read-write	extended commands,default:none
INT zxr10PingCommonIfOption	1.3.6.1.4.1.3902.3.104.2.1.1.5	INTEGER	read-write	option,default:none
I32 zxr10PingCommonPacketCount	1.3.6.1.4.1.3902.3.104.2.1.1.6	Integer32	read-write	repeat count,default:5
INT zxr10PingCommonPingType	1.3.6.1.4.1.3902.3.104.2.1.1.2	INTEGER	read-write	ping type,default:common
INT zxr10PingCommonRosStatus	1.3.6.1.4.1.3902.3.104.2.1.1.26	INTEGER	read-write	port members
I32 zxr10PingCommonSerial	1.3.6.1.4.1.3902.3.104.2.1.1.1	Integer32	read-only
I32 zxr10PingCommonTimeOut	1.3.6.1.4.1.3902.3.104.2.1.1.7	Integer32	read-write	timeout in seconds,default:2
T/F zxr10PingCommonTrapOncompletion	1.3.6.1.4.1.3902.3.104.2.1.1.28	TruthValue	read-write
STR zxr10PingCommonVrfName	1.3.6.1.4.1.3902.3.104.2.1.1.4	DisplayString	read-write	vrf name
STR zxr10PingCommResultEntryOwner	1.3.6.1.4.1.3902.3.104.2.2.1.9	DisplayString	read-only
I32 zxr10PingCommResultRcvPkts	1.3.6.1.4.1.3902.3.104.2.2.1.3	Integer32	read-only	receive packet
I32 zxr10PingCommResultRoundTripAvgTime	1.3.6.1.4.1.3902.3.104.2.2.1.6	Integer32	read-only	average RTT
I32 zxr10PingCommResultRoundTripMaxTime	1.3.6.1.4.1.3902.3.104.2.2.1.5	Integer32	read-only	max RTT
I32 zxr10PingCommResultRoundTripMinTime	1.3.6.1.4.1.3902.3.104.2.2.1.4	Integer32	read-only	min RTT
I32 zxr10PingCommResultRoundWobbleAvgTime	1.3.6.1.4.1.3902.3.104.2.2.1.12	Integer32	read-only	average wobble time
I32 zxr10PingCommResultRoundWobbleMaxTime	1.3.6.1.4.1.3902.3.104.2.2.1.11	Integer32	read-only	max wobble time
I32 zxr10PingCommResultRoundWobbleMinTime	1.3.6.1.4.1.3902.3.104.2.2.1.10	Integer32	read-only	min wobble time
I32 zxr10PingCommResultSentPkts	1.3.6.1.4.1.3902.3.104.2.2.1.2	Integer32	read-only	send packet
I32 zxr10PingCommResultSerial	1.3.6.1.4.1.3902.3.104.2.2.1.1	Integer32	read-only
zxr10PingMIB	1.3.6.1.4.1.3902.3.104.2
zxr10pingResultEntry	1.3.6.1.4.1.3902.3.104.2.2.1		not-accessible
zxr10PingResultTable	1.3.6.1.4.1.3902.3.104.2.2		not-accessible	ping result table.
zxr10PingTable	1.3.6.1.4.1.3902.3.104.2.1		not-accessible	ping information table.

RFC description

ZTE ZXR10 router ping diagnostics and VRF-based network connectivity testing.

Start monitoring ZTE ZXR10 routers/switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZXR10-PING-MIB

What Is ZXR10-PING-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description