All MIBs › ZXR10-IP-IF-MIB › zxr10IPSecondaryAddrRowStatus
zxr10IPSecondaryAddrRowStatus
Module: ZXR10-IP-IF-MIB
OID (symbolic): ZXR10-IP-IF-MIB::zxr10IPSecondaryAddrRowStatus
OID (numeric): 1.3.6.1.4.1.3902.3.103.1.1.1.2.1.3
Node type: OBJECT-TYPE
Type: RowStatus
Access: read-write
Description: This object is used to manage creation and deletion of rows in this table.
zxr10SecondaryIpAddrRowStatus must be set to 'creatAndGo' to create an entry and set to 'destroy' to delete an entry.
The value in any column may be modified any time even the value of this entry rowStatus object is 'active'.
Caution has to be taken before destroying any entry. Example: Need to change the IP address of an interface, which provides sole network connectivity. This has to be done by destroying the entry and creating a new one. The device would loose network connectivity after the entry is destroyed. In this case, the destroy of the old entry and the creation on the new entry should be packed in the same PDU.
What is zxr10IPSecondaryAddrRowStatus?
A RowStatus value used to create or delete a secondary IP address entry for this interface, with createAndGo used to add a row and destroy used to remove it; other columns in the row remain modifiable even while the row is active. Admins must take the same caution here as with the primary address table, since destroying a secondary address entry that provides an interface's sole connectivity to a subnet will drop reachability to that subnet. For example, an admin decommissioning an old secondary subnet would set zxr10IPSecondaryAddrRowStatus to destroy once no hosts still depend on that address range.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.3.103.1.1.1.2.1.3 snmpwalk -v2c -c public <target> ZXR10-IP-IF-MIB::zxr10IPSecondaryAddrRowStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.3.103.1.1.1.2.1.3.1 snmpget -v2c -c public <target> ZXR10-IP-IF-MIB::zxr10IPSecondaryAddrRowStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.3.103.1.1.1.2.1.3.1 s <value>
Start monitoring ZTE ZXR10 series routers/switches, ZXROS v4.6.02 (Layer-3 interface IP-address/MTU config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZXR10-IP-IF-MIB::zxr10IPSecondaryAddrRowStatus OID value, configure state conditions and alerts, and monitor any ZTE ZXR10 series routers/switches, ZXROS v4.6.02 (Layer-3 interface IP-address/MTU config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.3 | zxr10 | FANS-POWER-MIB |
| 1.3.6.1.4.1.3902.3.103 | zxr10interfaces | ZXR10-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.3.103.1 | zxr10IPIfMIB | ZXR10-IP-IF-MIB |
| 1.3.6.1.4.1.3902.3.103.1.1 | zxr10IPIfMIBObjects | ZXR10-IP-IF-MIB |
| 1.3.6.1.4.1.3902.3.103.1.1.1 | zxr10IPAddressConfiguration | ZXR10-IP-IF-MIB |
| 1.3.6.1.4.1.3902.3.103.1.1.1.2 | zxr10IPSecondaryAddrTable | ZXR10-IP-IF-MIB |
| 1.3.6.1.4.1.3902.3.103.1.1.1.2.1 | zxr10IPSecondaryAddrEnry | ZXR10-IP-IF-MIB |
| 1.3.6.1.4.1.3902.3.103.1.1.1.2.1.3 | zxr10IPSecondaryAddrRowStatus | ZXR10-IP-IF-MIB |