All MIBs › ZTE-AN-SYS-MGMT-MIB › zxAnSysConfigSaveFailedReason
zxAnSysConfigSaveFailedReason
Module: ZTE-AN-SYS-MGMT-MIB
OID (symbolic): ZTE-AN-SYS-MGMT-MIB::zxAnSysConfigSaveFailedReason
OID (numeric): 1.3.6.1.4.1.3902.1082.20.1.2.10.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The reason of saving flash operation failed. Possible values are: - noError(1): No error, saving flash successfully or no saving flash operation is excuted. - flashMediaFull(2): The save flash operation is failed because flash media is full. - createConfigFilesFailed(3): The save flash operation is failed because configuration file is created unsuccessfully. - openConfigFilesFailed(4): The save flash operation is failed because configuration file can't be opened successfully. - standbyCardCopyConfigFilesFailed(5) : The save flash operation is failed because configuration file can't be copied to the standby board. - unknown(99): The save flash operation is failed for some unknown error.
What is zxAnSysConfigSaveFailedReason?
This field reports the specific reason the most recent flash-save operation failed, such as full flash media or an inability to create the configuration file. Admins use this detailed reason code to diagnose exactly why a save failed rather than just knowing that it did, guiding the fix, such as clearing flash space. For example, a value of flashMediaFull(2) tells the admin to free up flash storage before the configuration can be saved successfully.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.20.1.2.10.1.5 snmpwalk -v2c -c public <target> ZTE-AN-SYS-MGMT-MIB::zxAnSysConfigSaveFailedReason
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.20.1.2.10.1.5.1 snmpget -v2c -c public <target> ZTE-AN-SYS-MGMT-MIB::zxAnSysConfigSaveFailedReason.1
Start monitoring ZTE Access Node (DSLAM/OLT broadband access device) (NTP-sync/syslog-destination config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-SYS-MGMT-MIB::zxAnSysConfigSaveFailedReason OID value, configure state conditions and alerts, and monitor any ZTE Access Node (DSLAM/OLT broadband access device) (NTP-sync/syslog-destination config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.20 | zxAnSystem | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.20.1 | zxAnSysMgmtMib | ZTE-AN-SYS-MGMT-MIB |
| 1.3.6.1.4.1.3902.1082.20.1.2 | zxAnSysMgmtObjects | ZTE-AN-SYS-MGMT-MIB |
| 1.3.6.1.4.1.3902.1082.20.1.2.10 | zxAnSysConfigSaveObjects | ZTE-AN-SYS-MGMT-MIB |
| 1.3.6.1.4.1.3902.1082.20.1.2.10.1 | zxAnSysConfigSaveGlobalObjects | ZTE-AN-SYS-MGMT-MIB |
| 1.3.6.1.4.1.3902.1082.20.1.2.10.1.5 | zxAnSysConfigSaveFailedReason | ZTE-AN-SYS-MGMT-MIB |