All MIBs › ZTE-AN-SYS-MGMT-MIB › zxAnSysConfigAutoSaveHoldOffTime
zxAnSysConfigAutoSaveHoldOffTime
Module: ZTE-AN-SYS-MGMT-MIB
OID (symbolic): ZTE-AN-SYS-MGMT-MIB::zxAnSysConfigAutoSaveHoldOffTime
OID (numeric): 1.3.6.1.4.1.3902.1082.20.1.2.10.1.2.6
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The hold off time of automatic saving flash when configuration data is changed. This variable is valid if zxAnSysConfigAutoSaveMode is set to configChanged(4)
What is zxAnSysConfigAutoSaveHoldOffTime?
This field sets, in seconds, how long the device waits after a configuration change before automatically saving it to flash, when in configChanged mode. Admins tune this delay to batch multiple rapid configuration edits into a single flash write instead of hammering flash on every small change. For example, setting zxAnSysConfigAutoSaveHoldOffTime to 3600, the default, waits an hour after the last change before saving, giving time for further edits to accumulate.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3902.1082.20.1.2.10.1.2.6 snmpwalk -v2c -c public <target> ZTE-AN-SYS-MGMT-MIB::zxAnSysConfigAutoSaveHoldOffTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3902.1082.20.1.2.10.1.2.6.1 snmpget -v2c -c public <target> ZTE-AN-SYS-MGMT-MIB::zxAnSysConfigAutoSaveHoldOffTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.3902.1082.20.1.2.10.1.2.6.1 i <value>
Start monitoring ZTE Access Node (DSLAM/OLT broadband access device) (NTP-sync/syslog-destination config status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ZTE-AN-SYS-MGMT-MIB::zxAnSysConfigAutoSaveHoldOffTime OID value, configure state conditions and alerts, and monitor any ZTE Access Node (DSLAM/OLT broadband access device) (NTP-sync/syslog-destination config status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3902 | zte | DPI-MIB |
| 1.3.6.1.4.1.3902.1082 | zxAccessNode | ZTE-AN-SMI |
| 1.3.6.1.4.1.3902.1082.20 | zxAnSystem | ZTE-AN-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3902.1082.20.1 | zxAnSysMgmtMib | ZTE-AN-SYS-MGMT-MIB |
| 1.3.6.1.4.1.3902.1082.20.1.2 | zxAnSysMgmtObjects | ZTE-AN-SYS-MGMT-MIB |
| 1.3.6.1.4.1.3902.1082.20.1.2.10 | zxAnSysConfigSaveObjects | ZTE-AN-SYS-MGMT-MIB |
| 1.3.6.1.4.1.3902.1082.20.1.2.10.1 | zxAnSysConfigSaveGlobalObjects | ZTE-AN-SYS-MGMT-MIB |
| 1.3.6.1.4.1.3902.1082.20.1.2.10.1.2 | zxAnSysConfigAutoSaveObjects | ZTE-AN-SYS-MGMT-MIB |
| 1.3.6.1.4.1.3902.1082.20.1.2.10.1.2.6 | zxAnSysConfigAutoSaveHoldOffTime | ZTE-AN-SYS-MGMT-MIB |