ZHNHPNA

All MIBs › ZHNHPNA

Organization: Zhone Technologies, Inc.

Last Updated: 2012-04-25

Category: DSL and Broadband Access

Description: Manages Zhone Technologies HPNA home phoneline network adapter configuration and link performance.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZHNHPNA?

ZHNHPNA is a Zhone Technologies, Inc. proprietary MIB reporting HCNA/HPNA (Home/Coax-Cabling Network Alliance) interface status on Zhone CPE devices. Its device tables (HPNA and HCNA variants), keyed by index, record MAC address and hardware/firmware version, while stations tables record per-station source/destination, rate, symbol rate, bits-per-symbol, and RX power. As a status/performance MIB it lets an administrator watch HPNA/HCNA link rate and RX power between stations on a Zhone CPE. It is deployed on Zhone Technologies CPE equipment (HPNA/HCNA in-home networking). Engineers can download the ZHNHPNA file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZHNHPNA. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Zhone Technologies CPE equipment (HPNA/HCNA in-home networking)

Monitoring Examples

An administrator checks hpnaStationRxPower and hpnaStationRate to diagnose a weak HPNA in-home networking link on a Zhone CPE.

What Can Be Monitored

HPNA/HCNA station link rate and RX power

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Gauge32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

MacAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

From Zhone

zhoneWtn

OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using hpnaStationRxPower OID:

Select a Zhone Technologies CPE equipment, HPNA/HCNA in-home networking (link-rate/RX-power status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hpnaStationRxPower into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports hPNA receive power, in dBm. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if the reading drifts outside the range expected for a healthy link, since a sustained power drop often precedes a fiber/cable fault or connector issue. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
zhnHpna	1.3.6.1.4.1.5504.2.5.47			This file defines the private Enterprise MIB extensions that define the HCNA/HPNA interfaces supported by the Zhone CPEs.
zhnHpnaObjects	1.3.6.1.4.1.5504.2.5.47.1
hpnaDeviceTable	1.3.6.1.4.1.5504.2.5.47.1.1		not-accessible	Table of HPNA Phoneline information for the integral HPNA devices.
hpnaDeviceEntry	1.3.6.1.4.1.5504.2.5.47.1.1.1		not-accessible	This table includes an entry for each integral HPNA device supported by the CPE.
U32 hpnaDeviceIndex	1.3.6.1.4.1.5504.2.5.47.1.1.1.1	Unsigned32	not-accessible	HPNA Device Table index
MAC hpnaDeviceMAC	1.3.6.1.4.1.5504.2.5.47.1.1.1.2	MacAddress	read-only	The Source MAC address of the integral HPNA device.
OCT hpnaDeviceHWVersion	1.3.6.1.4.1.5504.2.5.47.1.1.1.3	OCTET STRING	read-only	Version of the on-board, hardware chipset.
OCT hpnaDeviceFWVersion	1.3.6.1.4.1.5504.2.5.47.1.1.1.4	OCTET STRING	read-only	Firmware version of the code running on the HPNA device.
hcnaDeviceTable	1.3.6.1.4.1.5504.2.5.47.1.2		not-accessible	Table of HPNA Coax information for the integral HCNA devices.
hcnaDeviceEntry	1.3.6.1.4.1.5504.2.5.47.1.2.1		not-accessible	This table includes an entry for each integral HCNA device supported by the CPE.
U32 hcnaDeviceIndex	1.3.6.1.4.1.5504.2.5.47.1.2.1.1	Unsigned32	not-accessible	HCNA Device Table index
MAC hcnaDeviceMAC	1.3.6.1.4.1.5504.2.5.47.1.2.1.2	MacAddress	read-only	The Source MAC address of the integral HCNA device.
OCT hcnaDeviceHWVersion	1.3.6.1.4.1.5504.2.5.47.1.2.1.3	OCTET STRING	read-only	Version of the on-board, hardware chipset.
OCT hcnaDeviceFWVersion	1.3.6.1.4.1.5504.2.5.47.1.2.1.4	OCTET STRING	read-only	Firmware version of the code running on the HCNA device.
hpnaStationsTable	1.3.6.1.4.1.5504.2.5.47.1.3		not-accessible	Table of HPNA station information.
hpnaStationsEntry	1.3.6.1.4.1.5504.2.5.47.1.3.1		not-accessible	Each HPNA interface maintains a list of known HPNA devices on the network. This table includes an entry for each HPNA device detected.
U32 hpnaStationIndex	1.3.6.1.4.1.5504.2.5.47.1.3.1.1	Unsigned32	not-accessible	HPNA Stations Table index
MAC hpnaStationSource	1.3.6.1.4.1.5504.2.5.47.1.3.1.2	MacAddress	read-only	The MAC address of the source HPNA station.
MAC hpnaStationDestination	1.3.6.1.4.1.5504.2.5.47.1.3.1.3	MacAddress	read-only	The MAC address of the destination HPNA station.
U32 hpnaStationRate	1.3.6.1.4.1.5504.2.5.47.1.3.1.4	Unsigned32	read-only	HPNA transmission rate, in Mbps.
U32 hpnaStationSymbolRate	1.3.6.1.4.1.5504.2.5.47.1.3.1.5	Unsigned32	read-only	HPNA symbol rate, in Mhz.
U32 hpnaStationBitsPerSymbol	1.3.6.1.4.1.5504.2.5.47.1.3.1.6	Unsigned32	read-only	HPNA rate divided by the symbol rate, in Mhz.
I32 hpnaStationRxPowerEx	1.3.6.1.4.1.5504.2.5.47.1.3.1.7	Integer32	read-only	HPNA receive power, in dBm.
hcnaStationsTable	1.3.6.1.4.1.5504.2.5.47.1.4		not-accessible	Table of HPNA Coax (HCNA) station information.
hcnaStationsEntry	1.3.6.1.4.1.5504.2.5.47.1.4.1		not-accessible	Each HCNA interface maintains a list of known HPNA Coax devices on the network. This table includes an entry for each HCNA device detected.
U32 hcnaStationIndex	1.3.6.1.4.1.5504.2.5.47.1.4.1.1	Unsigned32	not-accessible	HCNA Stations Table index
MAC hcnaStationSource	1.3.6.1.4.1.5504.2.5.47.1.4.1.2	MacAddress	read-only	The MAC address of the source HCNA station.
MAC hcnaStationDestination	1.3.6.1.4.1.5504.2.5.47.1.4.1.3	MacAddress	read-only	The MAC address of the destination HCNA station.
U32 hcnaStationRate	1.3.6.1.4.1.5504.2.5.47.1.4.1.4	Unsigned32	read-only	HCNA transmission rate, in Mbps.
U32 hcnaStationSymbolRate	1.3.6.1.4.1.5504.2.5.47.1.4.1.5	Unsigned32	read-only	HCNA symbol rate, in Mhz.
U32 hcnaStationBitsPerSymbol	1.3.6.1.4.1.5504.2.5.47.1.4.1.6	Unsigned32	read-only	HCNA rate divided by the symbol rate, in Mhz.
I32 hcnaStationRxPower	1.3.6.1.4.1.5504.2.5.47.1.4.1.7	Integer32	read-only	HCNA receive power, in dBm.
zhnHpnaConformance	1.3.6.1.4.1.5504.2.5.47.2
zhnHpnaGroups	1.3.6.1.4.1.5504.2.5.47.2.1
zhnHpnaDeviceGroup	1.3.6.1.4.1.5504.2.5.47.2.1.1			A collection of Zhone IP objects that describe the HPNA station information. This group is only supported by CPEs that have one or more HPNA Phone lines.
zhnHcnaDeviceGroup	1.3.6.1.4.1.5504.2.5.47.2.1.2			A collection of Zhone IP objects that describe the HPNA station information. This group is only supported by CPEs that have one or more HPNA Coax line.
zhnHpnaStationsGroup	1.3.6.1.4.1.5504.2.5.47.2.1.3			A collection of Zhone IP objects that describe the HPNA station information. This group is only supported by CPEs that have one or more HPNA Phone line.
zhnHcnaStationsGroup	1.3.6.1.4.1.5504.2.5.47.2.1.4			A collection of Zhone IP objects that describe the HCNA station information. This group is only supported by CPEs that have one or more HPNA Coax line.
zhnHpnaCompliances	1.3.6.1.4.1.5504.2.5.47.2.2
zhnHpnaCompliance	1.3.6.1.4.1.5504.2.5.47.2.2.1			The Compliance statement for SNMP entities which manage the Zhone CPE HPNA/HCNA Station Information

RFC description

Vendor-specific SNMP MIB module for network device management, likely used for configuration and monitoring of network functions on ZTE or related equipment.

Start monitoring Zhone Technologies CPE equipment, HPNA/HCNA in-home networking (link-rate/RX-power status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZHNHPNA