XYPLEX-BRIDGE-MIB

All MIBs › XYPLEX-BRIDGE-MIB

Category: Xylogics and Xyplex Terminal Servers

Description: Manages Xyplex transparent bridging port state, spanning tree configuration, and forwarding table.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is XYPLEX-BRIDGE-MIB?

XYPLEX-BRIDGE-MIB is a legacy vendor MIB for Xyplex terminal servers/bridges that manages transparent bridging, covering port learning state, spanning tree participation, and forwarding table contents alongside general system identity objects. It exposes system-level objects like brsysName, brsysMacAddress, and brsysUpTime alongside bridging-specific queue discipline and LAT protocol compression table sizing objects. Its monitoring value spans both hardware and software status: brsysUpTime tracks device uptime for availability monitoring, while the LAT announcement and packet compression table usage objects (brsysLatAnnceCompTblUseSize/UseHigh) reveal whether internal software resource tables are approaching capacity. It is an older enterprise MIB predating widespread adoption of the standard BRIDGE-MIB (RFC 1493) and largely stands on its own within the Xyplex enterprise tree rather than depending on it. It would have been deployed in legacy DEC/Xyplex terminal server and LAT networking environments common in 1990s-era campus networks, where XYPLEX-BRIDGE-MIB SNMP monitoring tracked bridge uptime and LAT resource usage.

IPNetwork Monitor allows you to monitor SNMP objects defined in XYPLEX-BRIDGE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Xyplex terminal servers
Xyplex bridge/LAT network devices

Monitoring Examples

An operator would poll brsysUpTime to confirm the bridge has not unexpectedly rebooted, and check brsysLatAnnceCompTblUseSize against brsysLatAnnceCompTblSize to see if the LAT announcement compression table is nearing exhaustion, which would cause dropped LAT service announcements. brsysForwardQueueDisc and brsysLocalQueueDisc show the queuing discipline in effect, useful for diagnosing why forwarded traffic is being dropped or reordered under load.

What Can Be Monitored

device uptime
LAT announcement table usage
packet compression table usage
forward/local queue discipline
bridge MAC address identity

Imported Objects

From RFC1155-SMI

Counter
Gauge
OBJECT-TYPE
TimeTicks
enterprises

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access
xyplex	1.3.6.1.4.1.33
bridge	1.3.6.1.4.1.33.5
brsys	1.3.6.1.4.1.33.5.1
STR brsysName	1.3.6.1.4.1.33.5.1.1	DisplayString	read-write
OCT brsysMacAddress	1.3.6.1.4.1.33.5.1.2	OCTET STRING	read-only
TIK brsysUpTime	1.3.6.1.4.1.33.5.1.3	TimeTicks	read-only
INT brsysLatEnhance	1.3.6.1.4.1.33.5.1.4	INTEGER	read-write
INT brsysLatAnnceCompTblSize	1.3.6.1.4.1.33.5.1.5	INTEGER	read-write
INT brsysPcktCompTblSize	1.3.6.1.4.1.33.5.1.6	INTEGER	read-write
CTR brsysForwardQueueDisc	1.3.6.1.4.1.33.5.1.7	Counter	read-only
CTR brsysLocalQueueDisc	1.3.6.1.4.1.33.5.1.8	Counter	read-only
OCT brsysVitalinkMacAddress	1.3.6.1.4.1.33.5.1.9	OCTET STRING	read-write
GAU brsysLatAnnceCompTblUseSize	1.3.6.1.4.1.33.5.1.10	Gauge	read-only
GAU brsysLatAnnceCompTblUseHigh	1.3.6.1.4.1.33.5.1.11	Gauge	read-only
GAU brsysPcktCompTblUseSize	1.3.6.1.4.1.33.5.1.12	Gauge	read-only
GAU brsysPcktCompTblUseHigh	1.3.6.1.4.1.33.5.1.13	Gauge	read-only
stp	1.3.6.1.4.1.33.5.2
INT stpStp	1.3.6.1.4.1.33.5.2.1	INTEGER	read-write
INT stpForwardTimer	1.3.6.1.4.1.33.5.2.2	INTEGER	read-write
INT stpHelloTimer	1.3.6.1.4.1.33.5.2.3	INTEGER	read-write
INT stpMaxAgeTimer	1.3.6.1.4.1.33.5.2.4	INTEGER	read-write
OCT stpMulticastAddress	1.3.6.1.4.1.33.5.2.5	OCTET STRING	read-write
INT stpPriority	1.3.6.1.4.1.33.5.2.6	INTEGER	read-write
INT stpTopChngTimer	1.3.6.1.4.1.33.5.2.7	INTEGER	read-only
OCT stpDesigRoot	1.3.6.1.4.1.33.5.2.8	OCTET STRING	read-only
INT stpDesigRootCost	1.3.6.1.4.1.33.5.2.9	INTEGER	read-only
INT stpDesigForwardTimer	1.3.6.1.4.1.33.5.2.10	INTEGER	read-only
INT stpDesigHelloTimer	1.3.6.1.4.1.33.5.2.11	INTEGER	read-only
INT stpDesigMaxAgeTimer	1.3.6.1.4.1.33.5.2.12	INTEGER	read-only
INT stpDesigRootLink	1.3.6.1.4.1.33.5.2.13	INTEGER	read-only
INT stpDesigRootPriority	1.3.6.1.4.1.33.5.2.14	INTEGER	read-only
GAU stpTopChngCount	1.3.6.1.4.1.33.5.2.15	Gauge	read-only
TIK stpTopStableTime	1.3.6.1.4.1.33.5.2.16	TimeTicks	read-only
INT stpTopState	1.3.6.1.4.1.33.5.2.17	INTEGER	read-only
CTR stpNumLinks	1.3.6.1.4.1.33.5.2.18	Counter	read-only
stpLinkTbl	1.3.6.1.4.1.33.5.2.19		not-accessible
stpLinkTblEnt	1.3.6.1.4.1.33.5.2.19.1		not-accessible
INT stpLinkID	1.3.6.1.4.1.33.5.2.19.1.1	INTEGER	read-only
OCT stpLinkMacAddress	1.3.6.1.4.1.33.5.2.19.1.2	OCTET STRING	read-only
INT stpLinkpriority	1.3.6.1.4.1.33.5.2.19.1.3	INTEGER	read-write
INT stpLinkPathcost	1.3.6.1.4.1.33.5.2.19.1.4	INTEGER	read-write
INT stpLinkPathcostCur	1.3.6.1.4.1.33.5.2.19.1.5	INTEGER	read-only
INT stpLinkPathcostWeighted	1.3.6.1.4.1.33.5.2.19.1.6	INTEGER	read-write
INT stpLinkState	1.3.6.1.4.1.33.5.2.19.1.7	INTEGER	read-write
OCT stpLinkDesigRoot	1.3.6.1.4.1.33.5.2.19.1.8	OCTET STRING	read-only
INT stpLinkDesigCost	1.3.6.1.4.1.33.5.2.19.1.9	INTEGER	read-only
OCT stpLinkDesigBridge	1.3.6.1.4.1.33.5.2.19.1.10	OCTET STRING	read-only
INT stpLinkDesigLink	1.3.6.1.4.1.33.5.2.19.1.11	INTEGER	read-only
INT stpLinkTopChngAck	1.3.6.1.4.1.33.5.2.19.1.12	INTEGER	read-only
INT stpMaxForwardDelay	1.3.6.1.4.1.33.5.2.20	INTEGER	read-write
INT stpMaxMultiForwardDelay	1.3.6.1.4.1.33.5.2.21	INTEGER	read-write
INT stpEarlyLoopDetection	1.3.6.1.4.1.33.5.2.22	INTEGER	read-write
CTR stpEarlyLoopCount	1.3.6.1.4.1.33.5.2.23	Counter	read-only
fl	1.3.6.1.4.1.33.5.3
INT flFiltering	1.3.6.1.4.1.33.5.3.1	INTEGER	read-write
INT flTableSize	1.3.6.1.4.1.33.5.3.2	INTEGER	read-write
INT flDiscardTimeout	1.3.6.1.4.1.33.5.3.3	INTEGER	read-write
INT flUseTimeout	1.3.6.1.4.1.33.5.3.4	INTEGER	read-write
GAU flSrcNumSourceCur	1.3.6.1.4.1.33.5.3.5	Gauge	read-only
GAU flSrcNumSourceHigh	1.3.6.1.4.1.33.5.3.6	Gauge	read-only
GAU flSrcNumSourceMax	1.3.6.1.4.1.33.5.3.7	Gauge	read-only
flSrcFilterTbl	1.3.6.1.4.1.33.5.3.8		not-accessible
flSrcFilterTblEnt	1.3.6.1.4.1.33.5.3.8.1		not-accessible
INT flSrcEntID	1.3.6.1.4.1.33.5.3.8.1.1	INTEGER	read-only
OCT flSrcEntMacAddress	1.3.6.1.4.1.33.5.3.8.1.2	OCTET STRING	read-write
INT flSrcEntForwardFlag	1.3.6.1.4.1.33.5.3.8.1.3	INTEGER	read-write
CTR flSrcEntUseCount	1.3.6.1.4.1.33.5.3.8.1.4	Counter	read-only
GAU flDstInactiveNumCur	1.3.6.1.4.1.33.5.3.9	Gauge	read-only
GAU flDstInactiveNumHigh	1.3.6.1.4.1.33.5.3.10	Gauge	read-only
GAU flDstInactiveNumMax	1.3.6.1.4.1.33.5.3.11	Gauge	read-only
GAU flDstLearnedNumCur	1.3.6.1.4.1.33.5.3.12	Gauge	read-only
GAU flDstLearnedNumHigh	1.3.6.1.4.1.33.5.3.13	Gauge	read-only
GAU flDstLearnedNumMax	1.3.6.1.4.1.33.5.3.14	Gauge	read-only
CTR flDstLearnedNumErrors	1.3.6.1.4.1.33.5.3.15	Counter	read-only
GAU flDstStaticNumCur	1.3.6.1.4.1.33.5.3.16	Gauge	read-only
GAU flDstStaticNumHigh	1.3.6.1.4.1.33.5.3.17	Gauge	read-only
GAU flDstStaticNumMax	1.3.6.1.4.1.33.5.3.18	Gauge	read-only
flDstFilterTbl	1.3.6.1.4.1.33.5.3.19		not-accessible
flDstFilterTblEnt	1.3.6.1.4.1.33.5.3.19.1		not-accessible
INT flDstEntID	1.3.6.1.4.1.33.5.3.19.1.1	INTEGER	read-only
OCT flDstEntMacAddress	1.3.6.1.4.1.33.5.3.19.1.2	OCTET STRING	read-write
OCT flDstEntLinkMap	1.3.6.1.4.1.33.5.3.19.1.3	OCTET STRING	read-write
INT flDstEntStatus	1.3.6.1.4.1.33.5.3.19.1.4	INTEGER	read-write
GAU flDstEntTtl	1.3.6.1.4.1.33.5.3.19.1.5	Gauge	read-write
CTR flDstEntUseCount	1.3.6.1.4.1.33.5.3.19.1.6	Counter	read-only
flLinkTbl	1.3.6.1.4.1.33.5.3.20		not-accessible
flLinkTblEnt	1.3.6.1.4.1.33.5.3.20.1		not-accessible
INT flLinkEntID	1.3.6.1.4.1.33.5.3.20.1.1	INTEGER	read-only
INT flLinkEntLearning	1.3.6.1.4.1.33.5.3.20.1.2	INTEGER	read-write
prtcl	1.3.6.1.4.1.33.5.4
INT prtclProtocol	1.3.6.1.4.1.33.5.4.1	INTEGER	read-write
GAU prtclNumCur	1.3.6.1.4.1.33.5.4.2	Gauge	read-only
GAU prtclNumMax	1.3.6.1.4.1.33.5.4.3	Gauge	read-only
prtclTbl	1.3.6.1.4.1.33.5.4.4		not-accessible
prtclTblEnt	1.3.6.1.4.1.33.5.4.4.1		not-accessible
INT prtclEntID	1.3.6.1.4.1.33.5.4.4.1.1	INTEGER	read-only
INT prtclEntProtocolID	1.3.6.1.4.1.33.5.4.4.1.2	INTEGER	read-write
INT prtclEntMac	1.3.6.1.4.1.33.5.4.4.1.3	INTEGER	read-write
STR prtclEntName	1.3.6.1.4.1.33.5.4.4.1.4	DisplayString	read-write
INT prtclEntPriority	1.3.6.1.4.1.33.5.4.4.1.5	INTEGER	read-write
CTR prtclEntUseCount	1.3.6.1.4.1.33.5.4.4.1.6	Counter	read-only
INT prtclDefaultPriority	1.3.6.1.4.1.33.5.4.5	INTEGER	read-write
CTR prtclDefaultUseCount	1.3.6.1.4.1.33.5.4.6	Counter	read-only
lks	1.3.6.1.4.1.33.5.5
CTR lksNum	1.3.6.1.4.1.33.5.5.1	Counter	read-only
lksTbl	1.3.6.1.4.1.33.5.5.2		not-accessible
lksTblEnt	1.3.6.1.4.1.33.5.5.2.1		not-accessible
INT lksEntID	1.3.6.1.4.1.33.5.5.2.1.1	INTEGER	read-only
INT lksEntStateConfig	1.3.6.1.4.1.33.5.5.2.1.2	INTEGER	read-write
INT lksEntStateActive	1.3.6.1.4.1.33.5.5.2.1.3	INTEGER	read-only
INT lksEntType	1.3.6.1.4.1.33.5.5.2.1.4	INTEGER	read-only
OID lksEntTypeSpecific	1.3.6.1.4.1.33.5.5.2.1.5	OBJECT IDENTIFIER	read-only
STR lksEntName	1.3.6.1.4.1.33.5.5.2.1.6	DisplayString	read-write
GAU lksEntUtilizationCur	1.3.6.1.4.1.33.5.5.2.1.7	Gauge	read-only
GAU lksEntUtilizationHigh	1.3.6.1.4.1.33.5.5.2.1.8	Gauge	read-only
GAU lksEntUtilizationAvg	1.3.6.1.4.1.33.5.5.2.1.9	Gauge	read-only
GAU lksEntForwardingCur	1.3.6.1.4.1.33.5.5.2.1.10	Gauge	read-only
GAU lksEntForwardingHigh	1.3.6.1.4.1.33.5.5.2.1.11	Gauge	read-only
GAU lksEntForwardingAvg	1.3.6.1.4.1.33.5.5.2.1.12	Gauge	read-only
GAU lksEntFilteringCur	1.3.6.1.4.1.33.5.5.2.1.13	Gauge	read-only
GAU lksEntFilteringHigh	1.3.6.1.4.1.33.5.5.2.1.14	Gauge	read-only
GAU lksEntFilteringAvg	1.3.6.1.4.1.33.5.5.2.1.15	Gauge	read-only
GAU lksEntOutputQCur	1.3.6.1.4.1.33.5.5.2.1.16	Gauge	read-only
GAU lksEntOutputQHigh	1.3.6.1.4.1.33.5.5.2.1.17	Gauge	read-only
GAU lksEntOutputQTotal	1.3.6.1.4.1.33.5.5.2.1.18	Gauge	read-only
GAU lksEntTransmitLinkSpeed	1.3.6.1.4.1.33.5.5.2.1.19	Gauge	read-only
GAU lksEntReceiveLinkSpeed	1.3.6.1.4.1.33.5.5.2.1.20	Gauge	read-only
lksEntTraffic	1.3.6.1.4.1.33.5.5.2.1.21
CTR lksEntTrafficPacketsIn	1.3.6.1.4.1.33.5.5.2.1.21.1	Counter	read-only
CTR lksEntTrafficPacketsOut	1.3.6.1.4.1.33.5.5.2.1.21.2	Counter	read-only
CTR lksEntTrafficMulticastsIn	1.3.6.1.4.1.33.5.5.2.1.21.3	Counter	read-only
CTR lksEntTrafficMulticastsOut	1.3.6.1.4.1.33.5.5.2.1.21.4	Counter	read-only
CTR lksEntTrafficUnicastsIn	1.3.6.1.4.1.33.5.5.2.1.21.5	Counter	read-only
CTR lksEntTrafficUnicastsOut	1.3.6.1.4.1.33.5.5.2.1.21.6	Counter	read-only
CTR lksEntTrafficStpIn	1.3.6.1.4.1.33.5.5.2.1.21.7	Counter	read-only
CTR lksEntTrafficStpOut	1.3.6.1.4.1.33.5.5.2.1.21.8	Counter	read-only
CTR lksEntTrafficBytesIn	1.3.6.1.4.1.33.5.5.2.1.21.9	Counter	read-only
CTR lksEntTrafficBytesOut	1.3.6.1.4.1.33.5.5.2.1.21.10	Counter	read-only
lksEntDiscards	1.3.6.1.4.1.33.5.5.2.1.22
CTR lksEntDiscardCrcError	1.3.6.1.4.1.33.5.5.2.1.22.1	Counter	read-only
CTR lksEntDiscardFiltering	1.3.6.1.4.1.33.5.5.2.1.22.2	Counter	read-only
CTR lksEntDiscardnoBuffers	1.3.6.1.4.1.33.5.5.2.1.22.3	Counter	read-only
CTR lksEntDiscardPriority	1.3.6.1.4.1.33.5.5.2.1.22.4	Counter	read-only
CTR lksEntDiscardLatGroupAnnce	1.3.6.1.4.1.33.5.5.2.1.22.5	Counter	read-only
CTR lksEntDiscardLostBuffers	1.3.6.1.4.1.33.5.5.2.1.22.6	Counter	read-only
CTR lksEntDiscardOutputQueueFull	1.3.6.1.4.1.33.5.5.2.1.22.7	Counter	read-only
CTR lksEntDiscardDelayExceeded	1.3.6.1.4.1.33.5.5.2.1.22.8	Counter	read-only
wan	1.3.6.1.4.1.33.5.6
INT wanNullClock	1.3.6.1.4.1.33.5.6.1	INTEGER	read-write
CTR wanNum	1.3.6.1.4.1.33.5.6.2	Counter	read-only
wanTbl	1.3.6.1.4.1.33.5.6.3		not-accessible
wanTblEnt	1.3.6.1.4.1.33.5.6.3.1		not-accessible
INT wanEntID	1.3.6.1.4.1.33.5.6.3.1.1	INTEGER	read-only
INT wanEntCompression	1.3.6.1.4.1.33.5.6.3.1.2	INTEGER	read-write
INT wanEntDsrTimeout	1.3.6.1.4.1.33.5.6.3.1.3	INTEGER	read-write
STR wanEntLocalPhone	1.3.6.1.4.1.33.5.6.3.1.4	DisplayString	read-write
INT wanEntDialPhoneNumMax	1.3.6.1.4.1.33.5.6.3.1.5	INTEGER	read-only
wanEntDialPhoneTbl	1.3.6.1.4.1.33.5.6.3.1.6		not-accessible
wanEntDialPhoneEnt	1.3.6.1.4.1.33.5.6.3.1.6.1		not-accessible
INT wanEntDialPhoneEntID	1.3.6.1.4.1.33.5.6.3.1.6.1.1	INTEGER	read-only
STR wanEntDialPhoneEntPhone	1.3.6.1.4.1.33.5.6.3.1.6.1.2	DisplayString	read-write
OCT wanEntGroups	1.3.6.1.4.1.33.5.6.3.1.7	OCTET STRING	read-write
INT wanEntModemType	1.3.6.1.4.1.33.5.6.3.1.8	INTEGER	read-write
INT wanEntNullClock	1.3.6.1.4.1.33.5.6.3.1.9	INTEGER	read-write
INT wanEntPathcostWeighted	1.3.6.1.4.1.33.5.6.3.1.10	INTEGER	read-write
GAU wanEntErrorRateCur	1.3.6.1.4.1.33.5.6.3.1.11	Gauge	read-only
GAU wanEntErrorRateHigh	1.3.6.1.4.1.33.5.6.3.1.12	Gauge	read-only
GAU wanEntErrorRateAvg	1.3.6.1.4.1.33.5.6.3.1.13	Gauge	read-only
GAU wanEntLinkDownCur	1.3.6.1.4.1.33.5.6.3.1.14	Gauge	read-only
GAU wanEntLinkDownHigh	1.3.6.1.4.1.33.5.6.3.1.15	Gauge	read-only
CTR wanEntLinkDownTotal	1.3.6.1.4.1.33.5.6.3.1.16	Counter	read-only
CTR wanEntLinkDownCount	1.3.6.1.4.1.33.5.6.3.1.17	Counter	read-only
INT wanEntCableType	1.3.6.1.4.1.33.5.6.3.1.18	INTEGER	read-only
INT wanEntCtsCur	1.3.6.1.4.1.33.5.6.3.1.19	INTEGER	read-only
INT wanEntRtsCur	1.3.6.1.4.1.33.5.6.3.1.20	INTEGER	read-only
INT wanEntDcdCur	1.3.6.1.4.1.33.5.6.3.1.21	INTEGER	read-only
INT wanEntDsrCur	1.3.6.1.4.1.33.5.6.3.1.22	INTEGER	read-only
INT wanEntDtrCur	1.3.6.1.4.1.33.5.6.3.1.23	INTEGER	read-only
INT wanEntRingCur	1.3.6.1.4.1.33.5.6.3.1.24	INTEGER	read-only
CTR wanEntCtsChanges	1.3.6.1.4.1.33.5.6.3.1.25	Counter	read-only
CTR wanEntRtsChanges	1.3.6.1.4.1.33.5.6.3.1.26	Counter	read-only
CTR wanEntDcdChanges	1.3.6.1.4.1.33.5.6.3.1.27	Counter	read-only
CTR wanEntDsrChanges	1.3.6.1.4.1.33.5.6.3.1.28	Counter	read-only
CTR wanEntDtrChanges	1.3.6.1.4.1.33.5.6.3.1.29	Counter	read-only
CTR wanEntRingChanges	1.3.6.1.4.1.33.5.6.3.1.30	Counter	read-only
CTR wanEntCompNum	1.3.6.1.4.1.33.5.6.3.1.31	Counter	read-only
wanEntCompressionTbl	1.3.6.1.4.1.33.5.6.3.1.32		not-accessible
wanEntCompEnt	1.3.6.1.4.1.33.5.6.3.1.32.1		not-accessible
INT wanEntCompEntID	1.3.6.1.4.1.33.5.6.3.1.32.1.1	INTEGER	read-only
STR wanEntCompEntDescription	1.3.6.1.4.1.33.5.6.3.1.32.1.2	DisplayString	read-only
GAU wanEntCompEntCurrent	1.3.6.1.4.1.33.5.6.3.1.32.1.3	Gauge	read-only
GAU wanEntCompEntHigh	1.3.6.1.4.1.33.5.6.3.1.32.1.4	Gauge	read-only
GAU wanEntCompEntAverage	1.3.6.1.4.1.33.5.6.3.1.32.1.5	Gauge	read-only
INT wanEntCompressionStatus	1.3.6.1.4.1.33.5.6.3.1.33	INTEGER	read-only
INT wanVitalinkCompatibility	1.3.6.1.4.1.33.5.6.4	INTEGER	read-write
lan	1.3.6.1.4.1.33.5.7
CTR lanNum	1.3.6.1.4.1.33.5.7.1	Counter	read-only
lanTbl	1.3.6.1.4.1.33.5.7.2		not-accessible
lanTblEnt	1.3.6.1.4.1.33.5.7.2.1		not-accessible
INT lanEntID	1.3.6.1.4.1.33.5.7.2.1.1	INTEGER	read-only
INT lanEntShutdownThreshold	1.3.6.1.4.1.33.5.7.2.1.2	INTEGER	read-only
CTR lanEntFramingError	1.3.6.1.4.1.33.5.7.2.1.3	Counter	read-only
CTR lanEntLostPacketsError	1.3.6.1.4.1.33.5.7.2.1.4	Counter	read-only
CTR lanEntMemoryError	1.3.6.1.4.1.33.5.7.2.1.5	Counter	read-only
CTR lanEntOverflowError	1.3.6.1.4.1.33.5.7.2.1.6	Counter	read-only
CTR lanEntPacketInTooLongError	1.3.6.1.4.1.33.5.7.2.1.7	Counter	read-only
CTR lanEntCarrierLossError	1.3.6.1.4.1.33.5.7.2.1.8	Counter	read-only
CTR lanEntHeartbeatFailureError	1.3.6.1.4.1.33.5.7.2.1.9	Counter	read-only
CTR lanEntLateCollisionError	1.3.6.1.4.1.33.5.7.2.1.10	Counter	read-only
CTR lanEntPacketOutTooLongError	1.3.6.1.4.1.33.5.7.2.1.11	Counter	read-only
CTR lanEntRetryExceedError	1.3.6.1.4.1.33.5.7.2.1.12	Counter	read-only

RFC description

Bridge system management objects for Xyplex devices including system status, MAC addresses, and queue management.

Start monitoring Xyplex terminal servers, Xyplex bridge/LAT network devices (bridge-uptime/LAT-compression-table-usage status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download XYPLEX-BRIDGE-MIB

What Is XYPLEX-BRIDGE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description