All MIBs › XYLAN-PPP-MIB
Category: Xylan OmniSwitch
Description: Manages Xylan OmniSwitch PPP link parameters, authentication configuration, and compression settings.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is XYLAN-PPP-MIB?
This Xylan Corporation enterprise MIB for the OmniSwitch platform manages Point-to-Point Protocol (PPP) WAN links, covering link-level parameters such as authentication method (PAP/CHAP), compression settings, and negotiated link options. It primarily exposes configuration data for serial/WAN interfaces rather than counters, letting an operator confirm how a PPP link is set up. Its monitoring value lies in confirming the software configuration state of WAN links — whether authentication and compression are correctly negotiated — which is foundational to diagnosing why a PPP link fails to establish or drops unexpectedly. It complements the standard IETF PPP MIBs (RFC 1471/1472/1473) by adding Xylan-specific link-management objects layered on the standard PPP interface model. It is used in OmniSwitch deployments terminating serial WAN or dial-up PPP circuits, such as branch-office or legacy WAN aggregation setups. Engineers can download the XYLAN-PPP-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in XYLAN-PPP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Xylan OmniSwitch WAN/serial interface module
Monitoring Examples
No sample objects were available in this MIB source. In general, an administrator would poll the PPP link configuration to check the authentication method and compression settings per interface. Such a check would typically explain why a link negotiates without compression or fails CHAP authentication after a configuration change on one end.
What Can Be Monitored
- PPP link authentication method
- PPP compression configuration
- negotiated link parameters
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| IpAddress |
From RFC1213-MIB
| DisplayString |
From XYLAN-BASE-MIB
| xylanPppArch | OBJECT-IDENTITY |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| pppxConfigGroup | 1.3.6.1.4.1.800.2.17.1 | |||
| pppxConfigTable | 1.3.6.1.4.1.800.2.17.1.1 | not-accessible | A table of PPP protocol entity configuration information. | |
| pppxConfigEntry | 1.3.6.1.4.1.800.2.17.1.1.1 | not-accessible | An entry in the PPP Entity Configuration table, containing information about PPP protocol configuration. | |
| INT pppxConfigPeerID | 1.3.6.1.4.1.800.2.17.1.1.1.1 | INTEGER | read-only | The PPP peer ID. This is used as a unique ID to identify a PPP entity and to associate PPP links to it. For 'normal' PPP, there is one entry in the link table. For Multilink PPP there are one or more multiple links. In either case the Link table is indexed by Link index (one per link) and by Peer ID. When one or more entrys in the link table has the same Peer ID, then these entries form a group for use either for Multilink PPP, or as a rotary group. |
| STR pppxConfigDescription | 1.3.6.1.4.1.800.2.17.1.1.1.2 | DisplayString | read-write | A description for this PPP port or peer group. |
| INT pppxConfigAdminStatus | 1.3.6.1.4.1.800.2.17.1.1.1.3 | INTEGER | read-write | This object controls the Administrative Status of this PPP Entity. Enabled will allow the PPP Entity to operate. Disabled will disable the PPP Entity without deleting it. Delete will disable the PPP entity and delete the PPP configuration record. |
| INT pppxConfigMode | 1.3.6.1.4.1.800.2.17.1.1.1.4 | INTEGER | read-write | This object controls whether or not Multilink PPP will be used. |
| INT pppxConfigBridgingVLAN | 1.3.6.1.4.1.800.2.17.1.1.1.5 | INTEGER | read-write | The VLAN Group for PPP bridging. A value of zero(0) indicates that this PPP port will not perform a bridging service and will discard all bridged format packets received or transmitted. A non-zero value indicates the bridging VLAN to be used. |
| INT pppxConfigRoutingVLAN | 1.3.6.1.4.1.800.2.17.1.1.1.6 | INTEGER | read-write | The default VLAN for new PVCs that have not been configured for a routing Service. A value of zero(0) indicates that unconfigured VCs will not perform a routing service and will discard all routed format packets received or transmitted. A non-zero value indicates the routing VLAN to be used if the network informs the port of a new VC. |
| INT pppxConfigCompressionType | 1.3.6.1.4.1.800.2.17.1.1.1.7 | INTEGER | read-write | This object controls whether or not PPP will not perform compression (none) or the type of compression to attempt to negotiate for. |
| INT pppxConfigBridgingMode | 1.3.6.1.4.1.800.2.17.1.1.1.8 | INTEGER | read-write | The default Briding Mode, 0 = BRIDGE_ALL, 1 = ETHERNET ONLY 2 = Bridge All No FCS, 3 = Ethernet Only No FCS |
| INT pppxConfigIpConfigAdminStatus | 1.3.6.1.4.1.800.2.17.1.1.1.9 | INTEGER | read-write | The immediate desired status of the IP network protocol. Setting this object to open will inject an administrative open event into the IP network protocol's finite state machine. Setting this object to close will inject an administrative close event into the IP network protocol's finite state machine. |
| INT pppxConfigBcpConfigAdminStatus | 1.3.6.1.4.1.800.2.17.1.1.1.10 | INTEGER | read-write | The immediate desired status of the BCP network protocol. Setting this object to open will inject an administrative open event into the BCP network protocol's finite state machine. Setting this object to close will inject an administrative close event into the IP network protocol's finite state machine. |
| INT pppxConfigIpxConfigAdminStatus | 1.3.6.1.4.1.800.2.17.1.1.1.11 | INTEGER | read-write | The immediate desired status of the IPX network protocol. Setting this object to open will inject an administrative open event into the IPX network protocol's finite state machine. Setting this object to close will inject an administrative close event into the IP network protocol's finite state machine. |
| INT pppxConfigCcpConfigAdminStatus | 1.3.6.1.4.1.800.2.17.1.1.1.12 | INTEGER | read-write | The immediate desired status of the IPX network protocol. Setting this object to open will inject an administrative open event into the IPX network protocol's finite state machine. Setting this object to close will inject an administrative close event into the IP network protocol's finite state machine. |
| IP pppxConfigRemoteIpAddress | 1.3.6.1.4.1.800.2.17.1.1.1.13 | IpAddress | read-write | The Remote IP address of the PPP connection. If set to 0.0.0.0 and IP routing is enabled then the IP address will be learned during the IP LCP negotiation. If set to a value then no IP address negotiation will occur. |
| INT pppxConfigAuthenticationType | 1.3.6.1.4.1.800.2.17.1.1.1.14 | INTEGER | read-write | The desired Authentication protocol to use for this PPP connection. |
| STR pppxConfigUserIdToRemote | 1.3.6.1.4.1.800.2.17.1.1.1.15 | DisplayString | read-write | User ID sent to remote during PAP or CHAP Authentication. If this string is empty, then no local to remote authentication will occur. |
| STR pppxConfigPasswordToRemote | 1.3.6.1.4.1.800.2.17.1.1.1.16 | DisplayString | read-write | Password sent to remote during PAP or CHAP Authentication. If this string is empty, then no local to remote authentication will occur. |
| STR pppxConfigUserIdFromRemote | 1.3.6.1.4.1.800.2.17.1.1.1.17 | DisplayString | read-write | User ID expected to be received remote during PAP or CHAP Authentication. If this string is empty, then no remote to local authentication will be required. |
| STR pppxConfigPasswordFromRemote | 1.3.6.1.4.1.800.2.17.1.1.1.18 | DisplayString | read-write | Password expected to be received remote during PAP or CHAP Authentication. If this string is empty, then no remote to local authentication will be required. |
| INT pppxConfigMaxFailureCount | 1.3.6.1.4.1.800.2.17.1.1.1.19 | INTEGER | read-write | PPP LCP and NCP Negotiation Maximum Failure Count |
| INT pppxConfigMaxConfigureCount | 1.3.6.1.4.1.800.2.17.1.1.1.20 | INTEGER | read-write | PPP LCP Negotiation Maximum Configure Count |
| INT pppxConfigMaxTerminateCount | 1.3.6.1.4.1.800.2.17.1.1.1.21 | INTEGER | read-write | PPP LCP Negotiation Maximum Terminate Count |
| INT pppxConfigRetryTimeout | 1.3.6.1.4.1.800.2.17.1.1.1.22 | INTEGER | read-write | PPP LCP Negotiation Retry Timeout |
| pppxCpGroup | 1.3.6.1.4.1.800.2.17.2 | |||
| pppxCpTable | 1.3.6.1.4.1.800.2.17.2.1 | not-accessible | A table of PPP connection Link Control and Network Control Protocol status and statistics information. | |
| pppxCpEntry | 1.3.6.1.4.1.800.2.17.2.1.1 | not-accessible | An entry in the table, containing information about the PPP LCP and NCP status and statistics. | |
| INT pppxCpPeerID | 1.3.6.1.4.1.800.2.17.2.1.1.1 | INTEGER | read-only | A unique ID which identifies this PPP Control Protocol entity. |
| INT pppxCpSlotIndex | 1.3.6.1.4.1.800.2.17.2.1.1.2 | INTEGER | read-only | A unique value which identifies this WSM board slot that the PPP Control Protocol Entity is running on. A value of zero is returned when PPP is not currently assigned to a slot (e.g. for PPP for an incoming ISDN call. |
| INT pppxCpPortIndex | 1.3.6.1.4.1.800.2.17.2.1.1.3 | INTEGER | read-only | A unique value which identifies this WSM port that the PPP Control Protocol Entity is running on. A value of zero is returned when PPP is not currently assigned to a slot (e.g. for PPP for an incoming ISDN call.) |
| INT pppxCpIpOperStatus | 1.3.6.1.4.1.800.2.17.2.1.1.4 | INTEGER | read-only | The operational status of the IP network protocol. If the value of this object is up then the finite state machine for the IP network protocol has reached the Opened state. |
| INT pppxCpIpxOperStatus | 1.3.6.1.4.1.800.2.17.2.1.1.5 | INTEGER | read-only | The operational status of the IPX network protocol. If the value of this object is up then the finite state machine for the IP network protocol has reached the Opened state. |
| INT pppxCpBcpOperStatus | 1.3.6.1.4.1.800.2.17.2.1.1.6 | INTEGER | read-only | The operational status of the BCP network protocol. If the value of this object is up then the finite state machine for the IP network protocol has reached the Opened state. |
| INT pppxCpCcpOperStatus | 1.3.6.1.4.1.800.2.17.2.1.1.7 | INTEGER | read-only | The operational status of the CCP network protocol. If the value of this object is up then the finite state machine for the IP network protocol has reached the Opened state. |
| CTR pppxCpTxLcpPackets | 1.3.6.1.4.1.800.2.17.2.1.1.8 | Counter | read-only | The total number of transmitted Link Control Protocol packets on this PPP connection. |
| CTR pppxCpRxLcpPackets | 1.3.6.1.4.1.800.2.17.2.1.1.9 | Counter | read-only | The total number of received Link Control Protocol packets on this PPP connection. |
| CTR pppxCpTxIpcpPackets | 1.3.6.1.4.1.800.2.17.2.1.1.10 | Counter | read-only | The total number of transmitted IP Control Protocol packets on this PPP connection. |
| CTR pppxCpRxIpcpPackets | 1.3.6.1.4.1.800.2.17.2.1.1.11 | Counter | read-only | The total number of received IP Control Protocol packets on this PPP connection. |
| CTR pppxCpTxIpxcpPackets | 1.3.6.1.4.1.800.2.17.2.1.1.12 | Counter | read-only | The total number of transmitted IPX Control Protocol packets on this PPP connection. |
| CTR pppxCpRxIpxcpPackets | 1.3.6.1.4.1.800.2.17.2.1.1.13 | Counter | read-only | The total number of received IPX Control Protocol packets on this PPP connection. |
| CTR pppxCpTxBcpPackets | 1.3.6.1.4.1.800.2.17.2.1.1.14 | Counter | read-only | The total number of transmitted Bridge Control Protocol packets on this PPP connection. |
| CTR pppxCpRxBcpPackets | 1.3.6.1.4.1.800.2.17.2.1.1.15 | Counter | read-only | The total number of received Bridge Control Protocol packets on this PPP connection. |
| CTR pppxCpTxCcpPackets | 1.3.6.1.4.1.800.2.17.2.1.1.16 | Counter | read-only | The total number of transmitted Compression Control Protocol packets on this PPP connection. |
| CTR pppxCpRxCcpPackets | 1.3.6.1.4.1.800.2.17.2.1.1.17 | Counter | read-only | The total number of received Compression Control Protocol packets on this PPP connection. |
| pppxStatsGroup | 1.3.6.1.4.1.800.2.17.3 | |||
| pppxStatsTable | 1.3.6.1.4.1.800.2.17.3.1 | not-accessible | A table of PPP connection statistics information. | |
| pppxStatsEntry | 1.3.6.1.4.1.800.2.17.3.1.1 | not-accessible | An entry in the table, containing information about the PPP PPP connection statistics. | |
| INT pppxStatsPeerID | 1.3.6.1.4.1.800.2.17.3.1.1.1 | INTEGER | read-only | A unique ID which identifies the PPP Control Protocol entity associated with this PPP link. |
| INT pppxStatsIfIndex | 1.3.6.1.4.1.800.2.17.3.1.1.2 | INTEGER | read-only | The ifindex that represents this PPP link. |
| INT pppxStatsSlotIndex | 1.3.6.1.4.1.800.2.17.3.1.1.3 | INTEGER | read-only | A unique value which identifies this HSM board slot that this PPP link is running on. |
| INT pppxStatsPortIndex | 1.3.6.1.4.1.800.2.17.3.1.1.4 | INTEGER | read-only | A unique value which identifies this WSM submodule port that this PPP link is running on. |
| INT pppxStatsSubIndex | 1.3.6.1.4.1.800.2.17.3.1.1.5 | INTEGER | read-only | A unique value which identifies the sub-element of the WSM submodule port that this PPP link is running on. For Serial ports this will always return 0. For ISDN BRI ports, this will return 1 or 2 for B1 or B2 channel respectively. |
| CTR pppxStatsTxIPOctets | 1.3.6.1.4.1.800.2.17.3.1.1.6 | Counter | read-only | The total number of transmitted octets (including the PPP Header field) within routed IP format packets on this PPP connection. |
| CTR pppxStatsTxIPPackets | 1.3.6.1.4.1.800.2.17.3.1.1.7 | Counter | read-only | The total number of transmitted routed IP format packets on this PPP connection. |
| CTR pppxStatsRxIPOctets | 1.3.6.1.4.1.800.2.17.3.1.1.8 | Counter | read-only | The total number of received octets (including the PPP Header field) within routed IP format packets on this PPP connection. |
| CTR pppxStatsRxIPPackets | 1.3.6.1.4.1.800.2.17.3.1.1.9 | Counter | read-only | The total number of received routed IP format packets on this PPP connection. |
| CTR pppxStatsTxIPXOctets | 1.3.6.1.4.1.800.2.17.3.1.1.10 | Counter | read-only | The total number of transmitted octets (including the PPP Header field) within routed IPX format packets on this PPP connection. |
| CTR pppxStatsTxIPXPackets | 1.3.6.1.4.1.800.2.17.3.1.1.11 | Counter | read-only | The total number of transmitted routed IPX format packets on this PPP connection. |
| CTR pppxStatsRxIPXOctets | 1.3.6.1.4.1.800.2.17.3.1.1.12 | Counter | read-only | The total number of received octets (including the PPP Header field) within routed IPX format packets on this PPP connection. |
| CTR pppxStatsRxIPXPackets | 1.3.6.1.4.1.800.2.17.3.1.1.13 | Counter | read-only | The total number of received routed IPX format packets on this PPP connection. |
| CTR pppxStatsTxBPDUOctets | 1.3.6.1.4.1.800.2.17.3.1.1.14 | Counter | read-only | The total number of transmitted octets (including the PPP Header field) within BPDU packets on this PPP connection. |
| CTR pppxStatsTxBPDUPackets | 1.3.6.1.4.1.800.2.17.3.1.1.15 | Counter | read-only | The total number of transmitted BPDU packets on this PPP connection. |
| CTR pppxStatsRxBPDUOctets | 1.3.6.1.4.1.800.2.17.3.1.1.16 | Counter | read-only | The total number of received octets (including the PPP Header field) within BPDU packets on this PPP connection. |
| CTR pppxStatsRxBPDUPackets | 1.3.6.1.4.1.800.2.17.3.1.1.17 | Counter | read-only | The total number of received BPDU packets on this PPP connection. |
| CTR pppxStatsTxEthernetOctets | 1.3.6.1.4.1.800.2.17.3.1.1.18 | Counter | read-only | The total number of transmitted octets (including the PPP Header field) within bridged 802.3 format packets on this PPP connection. |
| CTR pppxStatsTxEthernetPackets | 1.3.6.1.4.1.800.2.17.3.1.1.19 | Counter | read-only | The total number of transmitted bridged 802.3 format packets on this PPP connection. |
| CTR pppxStatsRxEthernetOctets | 1.3.6.1.4.1.800.2.17.3.1.1.20 | Counter | read-only | The total number of received octets (including the PPP Header field) within bridged 802.3 format packets on this PPP connection. |
| CTR pppxStatsRxEthernetPackets | 1.3.6.1.4.1.800.2.17.3.1.1.21 | Counter | read-only | The total number of received bridged 802.3 format packets on this PPP connection. |
| CTR pppxStatsTx8025Octets | 1.3.6.1.4.1.800.2.17.3.1.1.22 | Counter | read-only | The total number of transmitted octets (including the PPP Header field) within 8025 packets on this PPP connection. |
| CTR pppxStatsTx8025Packets | 1.3.6.1.4.1.800.2.17.3.1.1.23 | Counter | read-only | The total number of transmitted 8025 packets on this PPP connection. |
| CTR pppxStatsRx8025Octets | 1.3.6.1.4.1.800.2.17.3.1.1.24 | Counter | read-only | The total number of received octets (including the PPP Header field) within 8025 packets on this PPP connection. |
| CTR pppxStatsRx8025Packets | 1.3.6.1.4.1.800.2.17.3.1.1.25 | Counter | read-only | The total number of received 8025 packets on this PPP connection. |
| CTR pppxStatsTxFDDIOctets | 1.3.6.1.4.1.800.2.17.3.1.1.26 | Counter | read-only | The total number of transmitted octets (including the PPP Header field) within FDDI packets on this PPP connection. |
| CTR pppxStatsTxFDDIPackets | 1.3.6.1.4.1.800.2.17.3.1.1.27 | Counter | read-only | The total number of transmitted FDDI packets on this PPP connection. |
| CTR pppxStatsRxFDDIOctets | 1.3.6.1.4.1.800.2.17.3.1.1.28 | Counter | read-only | The total number of received octets (including the PPP Header field) within FDDI packets on this PPP connection. |
| CTR pppxStatsRxFDDIPackets | 1.3.6.1.4.1.800.2.17.3.1.1.29 | Counter | read-only | The total number of received FDDI packets on this PPP connection. |
| CTR pppxStatsTxCompressedOctets | 1.3.6.1.4.1.800.2.17.3.1.1.30 | Counter | read-only | The total number of transmitted octets (including the PPP Header field) within compressed format packets on this PPP connection. |
| CTR pppxStatsTxCompressedPackets | 1.3.6.1.4.1.800.2.17.3.1.1.31 | Counter | read-only | The total number of transmitted compressed format packets on this PPP connection. |
| CTR pppxStatsRxCompressedOctets | 1.3.6.1.4.1.800.2.17.3.1.1.32 | Counter | read-only | The total number of received octets (including the PPP Header field) within compressed format packets on this PPP connection. |
| CTR pppxStatsRxCompressedPackets | 1.3.6.1.4.1.800.2.17.3.1.1.33 | Counter | read-only | The total number of received compressed format packets on this PPP connection. |
| CTR pppxStatsTxPrecompressedOctets | 1.3.6.1.4.1.800.2.17.3.1.1.34 | Counter | read-only | The total number of octets (including the PPP Header field) prior to compression of data for transmission within compressed format packets on this PPP connection. |
| CTR pppxStatsRxDecompressedOctets | 1.3.6.1.4.1.800.2.17.3.1.1.35 | Counter | read-only | The total number of octets (including the PPP Header field) after decompression of data received within compressed format packets on this PPP connection. |
| CTR pppxStatsRxCompressedDiscards | 1.3.6.1.4.1.800.2.17.3.1.1.36 | Counter | read-only | The total number of received compressed format packets on this PPP connection that were discarded due to error or lost packets (e.g. out of sequence, decompression errors, etc.) |
| pppxIncomingGroup | 1.3.6.1.4.1.800.2.17.4 | |||
| pppxIncomingTable | 1.3.6.1.4.1.800.2.17.4.1 | not-accessible | A table of PPP protocol entity Incoming configuration information. | |
| pppxIncomingEntry | 1.3.6.1.4.1.800.2.17.4.1.1 | not-accessible | An entry in the PPP Entity Configuration table, containing information about PPP protocol configuration. | |
| INT pppxIncomingIndex | 1.3.6.1.4.1.800.2.17.4.1.1.1 | INTEGER | read-only | Index to uniquelly identify this entry . |
| INT pppxIncomingAdminStatus | 1.3.6.1.4.1.800.2.17.4.1.1.2 | INTEGER | read-write | This object controls the Administrative Status of this Incoming Entity. Enabled will allow the Incoming Entity to operate. Disabled will disable the Incoming Entity without deleting it. Delete will disable the Incoming entity and delete the PPP configuration record. |
| INT pppxIncomingAuthenticationType | 1.3.6.1.4.1.800.2.17.4.1.1.3 | INTEGER | read-write | The desired Authentication protocol to use for this PPP connection. |
| STR pppxIncomingUserIdToRemote | 1.3.6.1.4.1.800.2.17.4.1.1.4 | DisplayString | read-write | User ID sent to remote during PAP or CHAP Authentication. If this string is empty, then no local to remote authentication will occur. |
| STR pppxIncomingPasswordToRemote | 1.3.6.1.4.1.800.2.17.4.1.1.5 | DisplayString | read-write | Password sent to remote during PAP or CHAP Authentication. If this string is empty, then no local to remote authentication will occur. |
| INT pppxIncomingBridgingVLAN | 1.3.6.1.4.1.800.2.17.4.1.1.6 | INTEGER | read-write | The VLAN Group for PPP bridging. A value of zero(0) indicates that this PPP port will not perform a bridging service and will discard all bridged format packets received or transmitted. A non-zero value indicates the bridging VLAN to be used. |
| INT pppxIncomingRoutingVLAN | 1.3.6.1.4.1.800.2.17.4.1.1.7 | INTEGER | read-write | The default VLAN for new PVCs that have not been configured for a routing Service. A value of zero(0) indicates that unconfigured VCs will not perform a routing service and will discard all routed format packets received or transmitted. A non-zero value indicates the routing VLAN to be used if the network informs the port of a new VC. |
| INT pppxIncomingCompressionType | 1.3.6.1.4.1.800.2.17.4.1.1.8 | INTEGER | read-write | This object controls whether or not PPP will not perform compression (none) or the type of compression to attempt to negotiate for. |
| INT pppxIncomingIpConfigAdminStatus | 1.3.6.1.4.1.800.2.17.4.1.1.9 | INTEGER | read-write | The immediate desired status of the IP network protocol. Setting this object to open will inject an administrative open event into the IP network protocol's finite state machine. Setting this object to close will inject an administrative close event into the IP network protocol's finite state machine. |
| INT pppxIncomingBcpConfigAdminStatus | 1.3.6.1.4.1.800.2.17.4.1.1.10 | INTEGER | read-write | The immediate desired status of the BCP network protocol. Setting this object to open will inject an administrative open event into the BCP network protocol's finite state machine. Setting this object to close will inject an administrative close event into the IP network protocol's finite state machine. |
| INT pppxIncomingIpxConfigAdminStatus | 1.3.6.1.4.1.800.2.17.4.1.1.11 | INTEGER | read-write | The immediate desired status of the IPX network protocol. Setting this object to open will inject an administrative open event into the IPX network protocol's finite state machine. Setting this object to close will inject an administrative close event into the IP network protocol's finite state machine. |
| INT pppxIncomingCcpConfigAdminStatus | 1.3.6.1.4.1.800.2.17.4.1.1.12 | INTEGER | read-write | The immediate desired status of the CCP network protocol. Setting this object to open will inject an administrative open event into the IPX network protocol's finite state machine. Setting this object to close will inject an administrative close event into the IP network protocol's finite state machine. |
RFC description
Alcatel Internetworking PPP protocol management including link statistics, control protocols, and compression configuration.
Start monitoring Xylan OmniSwitch WAN/serial interface module (PPP authentication/compression link-config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.