All MIBs › XF-RADIOLINK-PTP-TERMINAL-MIB
Organization: Ericsson AB
Last Updated: 2020-03-17
Category: Ericsson Radio Link
Description:
Monitors Ericsson XF point-to-point radio terminal configuration, alarm status, and link availability.
Imported Objects
From ENTITY-MIB
| entLogicalIndex | OBJECT-TYPE |
| entPhysicalIndex | OBJECT-TYPE |
From HC-PerfHist-TC-MIB
| HCPerfCurrentCount |
From IF-MIB
| ifIndex | OBJECT-TYPE |
From PerfHist-TC-MIB
| PerfCurrentCount | |
| PerfIntervalCount |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| TimeTicks |
From SNMPv2-TC
| DisplayString | |
| TEXTUAL-CONVENTION | |
| TruthValue |
From XF-TOP-MIB
| xfRadioLink | OBJECT-IDENTITY |
What Is XF-RADIOLINK-PTP-TERMINAL-MIB?
This MIB is part of Ericsson's MINI-LINK point-to-point microwave radio product family, defining terminal-level management objects for radio link terminals used in wireless backhaul. It exposes terminal configuration and status data, including alarm conditions and link availability metrics for the radio terminal. Its main monitoring value is hardware/software status of the radio terminal itself, such as alarm state and whether the radio link is currently available/up, which are critical for wireless backhaul reliability. As a vendor MIB tied to a specific radio product line, it likely works alongside other Ericsson XF/MINI-LINK MIBs covering related carrier and inventory objects. It is deployed on Ericsson MINI-LINK point-to-point microwave radio terminals used for cellular backhaul or enterprise wireless links. Engineers can download the XF-RADIOLINK-PTP-TERMINAL-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in XF-RADIOLINK-PTP-TERMINAL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
What Can Be Monitored
- terminal alarm status
- link availability
- terminal configuration state
- radio link operational status
Supported Devices
- Ericsson MINI-LINK point-to-point radio terminal
Monitoring Examples
An administrator would poll the terminal's alarm status objects to detect active alarms (e.g., loss of radio signal or hardware fault) and check link availability metrics to confirm the microwave hop is passing traffic. A terminal reporting an active alarm alongside degraded availability would indicate a fading radio path or antenna misalignment. No concrete sample object names were provided for this MIB, so this scenario is inferred from the module description alone.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| xfRadioLinkPtpTerminalMIB | 1.3.6.1.4.1.193.81.3.4.1 | This MIB defines objects on terminal level for point-to-point Radiolink terminals. | ||
| xfRadioLinkPtpTerminalObjects | 1.3.6.1.4.1.193.81.3.4.1.1 | |||
| xfRLPtpTerminalTable | 1.3.6.1.4.1.193.81.3.4.1.1.1 | not-accessible | Table for Radiolink point-to-point terminal managed objects. The table is indexed with entLogicalIndex. | |
| xfRLPtpTerminalEntry | 1.3.6.1.4.1.193.81.3.4.1.1.1.1 | not-accessible | An entry in the xfRLPtpTerminalTable | |
| STR xfTermId | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.1 | SnmpAdminString | read-write | Network identity for terminal. Same as GNM id. Note! Id TRMA, TRMB, SMMA, SMMB, AAAA and BBBB are not possible to set. Default = .TRMA. (also for Far End) Near end access: read-write Far end access: read-write (Traffic Node), read-only (other) |
| INT xfTermType | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.2 | INTEGER | read-only | Terminal type - other - Unknown - rlMLE - MLE classic - rlXfMLE - MMU2 - rlXfMLTN - MMU2B - rlXfMLStandalone(5) - MMU2 CS - rlXfMLTNPT(6) - Pt1 |
| INT xfTermProtection | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.3 | INTEGER | read-write | This object sets the protection mode of the terminal. - other - Unknown - unprotected - 1+0 - protectedHotStandby - 1+1 Hot - protectedWorkingStandby - 1+1 Working - UnProtectedSDC - 1+0 with Space Diversity - enhancedRLB - Enhanced Radio Link Bonding (1+1 PDH and 1+1/2+0 Ethernet) Default value: unprotected(2) Near end access: read-write Far end access: read-write (Traffic Node), read-only (other) |
| INT xfTermCapacity | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.4 | INTEGER | read-write | This object sets the capacity on the terminal * other - Unknown * twoE1 - 2x2 Mbps * fourE1 - 4*2 Mbps (only rlMLE) * oneE2 - 8 Mbps * twoE2 - 2x8 Mbps * oneE3oneE1 - 34+2 Mbps * twoE3 - 2x34 Mbps * fourE3 - 4*34 Mbps * fourDS1 - 4xDS1 * eightDS1 - 8xDS1 * sixteenDS1 - 16*DS1 * seventeenDS1 - 16DS1+DS1 * oneStm0 - STM-0 * oneStm1oneE1 - STM-1+2 * thirtytwoDS1 - 32xDS1 * oneStm1oneDS1 - STM-1+DS1 * oneStm1oneE1at50MHz - STM-1+2 Mpbs @ 50 MHz * twentytwoE1 - 22xE1 * thirtyfiveE1 - 35xE1 * fortysixE1 - 46xE1 * seventyfiveE1 - 75xE1 * oneStm1OneJ1 - 1xSTM-1 + 1xJ1 * sixtynineDS1 - 69xDS1 * eightyDS1 - 80xDS1 * oneStm1OneE1LH - STM-1+2 for LH * oneStm1OneDS1LH - STM-1+DS1 for LH Default value PDH CQPSK ETSI: twoE1(2) MMU2, MMU2 B, MMU2 C Default value PDH CQPSK ANSI: fourDS1(9) MMU2 BA, MMU2 CA Default value PDH QAM ETSI: twentytwoE1(18) MMU2 D Default value PDH QAM ANSI: sixtynineDS1(23) MMU2 DA Default value SDH ETSI: oneStm1oneE1(14) MMU2 E, MMU2 F Default value SDH ANSI: oneStm1oneDS1(16) MMU2 E, MMU2 F Near end access: read-write Far end access: read-write (Traffic Node), read-only (MLE) Note that setting far end xfTermCapacity will remove far end traffic cross connects. oneStm1oneE1(14) and oneStm1oneE1at50MHz(17) has the same capacity and modulation but at different bandwidth, hence the two values. Capacities above 2xE1 for MMU2 B OFH, MMU2 C OFH, ATU and ATU B OFH are under license control. |
| BIT xfTermCapacityCapability | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.5 | Bits | read-only | This object shows the capacity capability on the terminal. Binary AND on contained modems units capabilities. |
| TER xfTermModulation | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.6 | TermModulation | read-write | This object sets the modulation method on the terminal. Legal settable values are: - cqpsk(2) CQPSK - qam16(3) 16-QAM - qam128(4) 128-QAM - qam32(5) 32-QAM - qam64(6) 64-QAM Default value PDH CQPSK ETSI: cqpsk(2) MMU2, MMU2 B, MMU2 C Default value PDH CQPSK ANSI: cqpsk(2) MMU2 BA, MMU2 CA Default value PDH QAM ETSI: qam16(3) MMU2 D Default value PDH QAM ANSI: qam128(4) MMU2 DA Default value SDH ETSI: qam128(4) MMU2 E, MMU2 F Default value SDH ANSI: qam128(4) MMU2 E, MMU2 F Near end access: read-write Far end access: read-write (Traffic Node), read-only (other) Note that setting far end xfTermModulation might remove far end traffic connections. Modulation other than CQPSK for MMU2 C OFH are under license control. |
| BIT xfTermModulationCapability | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.7 | Bits | read-only | This object shows the modulation capability on the terminal. Binary AND on contained modems and radio units capabilities. |
| INT xfTermRestore | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.8 | INTEGER | read-write | rlXfMLTN: Restore command is clearing RF, IF and RxLoop, enable xfTermTrapEnable, turn transmitter on and set protection switch mode to Auto. In case of MMU2 E and MMU2 F it also clears the STM-1 Line Loop and Local Loop. Far end rlMLE and rlXfMLE: Restore command sets P-mark to off, all loops are set to off, all Test Port connections are removed, Transmitter is set to On and Switch Mode is set to Auto. |
| BIT xfTermAlarmSeverity | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.9 | Bits | read-only | This object shows the highest alarm severity for contained units and interfaces in the terminal including E1, E2 and E3 interfaces. Terminal alarm severity is indicated by 3 bits: bits 012 000 clear 001 undetermined 010 warning 011 minor 100 major 101 critical 110 not defined 111 not applicable |
| INT xfTermTrapEnable | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.10 | INTEGER | read-write | Disables/enables trap sending from this terminal. Note, terminals with termType = rlXfMLE will not include E1, E2 and E3 interfaces. Default value: enable(2) |
| INT xfTermAsPort | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.11 | INTEGER | read-only | rlXfMLTN: Access server port used to reach far end terminals of type rlMLE or rlXfMLE, else notAvailable (1). rlXfMLE: Access server port used to reach a near end terminal of type rlXfMLE. aspX002 - Port 3002/4002 .. - .. aspX021 - Port 3021/4021 Note, Last available port differs between different AMMs. AMM 2p: aspX003 AMM 6p: aspX006 AMM 20p: aspX021 Near end access: read-only Far end access: no access |
| INT xfTermRemoteIdCheck | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.12 | INTEGER | read-write | This object sets if check of identity of remote terminal shall be performed or not. Legal values are: - enable(2): radio id check enabled - disable(3): radio id check disabled Default value: disable(3) |
| STR xfTermRemoteId | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.13 | SnmpAdminString | read-write | Network identity for remote terminal. Same as GNM id. Note: TRMA, TRMB, SMMA, SMMB, AAAA and BBBB are not possible to set. A change of the far end value might disconnect IP DCN, but internal GNM connection will not be disconnected. Default value: TRMB (initial) |
| INT xfTermPreset | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.14 | INTEGER | read-write | For terminals with termType = rlXfMLE or rlMLE: - Terminal is restored with factory settings. - Protected terminals will be set to unprotected. For terminals with termType = rlXfMLTN: - Terminal is restored with default configuration. Near end access: read-write Far end access: no access |
| INT xfTermBerAlarmThreshold | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.15 | INTEGER | read-write | Threshold for BER alarm. Legal values: - ber1e3(2): BER=1e-3 (default) - ber1e4(3): BER=1e-4 - ber1e5(4): BER=1e-5 - ber1e6(5): BER=1e-6 |
| I32 xfTermFadeNotificationTimer | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.16 | Integer32 | read-write | Notification suppression timer for protection alarms. Unit: 1 sec Value range: 0-1000 Default value: 200 Near end access: read-write Far end access: read-only (Traffic Node) |
| I32 xfTermEquipmentProtectionIndex | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.17 | Integer32 | read-only | Unprotected: 0 Protected: EntPhysicalindex of MMU in lowest slot |
| STR xfTermSysName | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.18 | DisplayString | read-only | The system name of the TN hosting the terminal. Near end terminal: a zero-length string is returned as MIB-II/system/sysName should be used instead. Far end terminal: the system name is returned. |
| CHA xfTermChannelMode | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.19 | ChannelMode | read-write | Channel mode for the terminal (administrative status). This is only settable according to xfTermChannelModeCapability. Legal values are: - ccdp(2): Co-Channel Dual Polarization (XPIC) - accp(3): Adjacent Channels Co-Polarization (non-XPIC) - acap(4): Adjacent Channels Alternate Polarization (non-XPIC) Default value: acap(4) Near end access: read-write Far end access: read-write (Traffic Node only) |
| BIT xfTermChannelModeCapability | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.20 | Bits | read-only | Channel mode capability. Legal values are: - ccdp(0) ........ Co-Channel Dual Polarization (XPIC) - accp(1) ........ Adjacent Channels Co-Polarization (non-XPIC) - acap(2) ........ Adjacent Channels Alternate Polarization (non-XPIC) - ccdp16QAM(3).... Co-Channel Dual Polarization (XPIC) for 16QAM only on MMU2 F - ccdp64QAM(4).... Co-Channel Dual Polarization (XPIC) for 64QAM only on MMU2 F - ccdp128QAM(5)... Co-Channel Dual Polarization (XPIC) for 128QAM only on MMU2 F Default value: acap(2) Near end access: read-write Far end access: read-write (Traffic Node only) |
| INT xfTermTrafficAndDCN | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.21 | INTEGER | read-write | Enable or disable traffic. AIS is generated on all traffic interfaces when traffic is disabled, i.e. xfTermTrafficAndDCN = DCNOnly. The hop and DCN is working, though (primarily used for license handling). Default value: trafficAndDCN(1) Near end access: read-write Far end access: read-write (Traffic Node only) |
| INT xfTermFrameFormat | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.22 | INTEGER | read-write | The frame format version used by the modem. Legal values are: - version0(2) only valid for MMU2 C modems - version1(3) only valid for MMU2 C modem. Default value: other(1) Near end access: read-write Far end access: read-write (Traffic Node only) |
| BIT xfTermFrameFormatCapability | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.23 | Bits | read-only | Frame format versions supported by the modem. Bit 0: modem MMU2 C supports frame format Version 0 Bit 1: modem MMU2 C supports frame format Version 1 (for QAM 2xE2, E3+E1 and 2xE3) |
| INT xfTermDCNRadioConfiguration | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.24 | INTEGER | read-write | DCN radio capacity for terminal. Legal values are: - dcnRadio128kbps(2) RFCOH channel only: all RSOH bytes pass transparently over the hop - dcnRadio320kbpsDCCr(3) 128 kbps + DCCr (default) - dcnRadio320kbpsMSB (4) 128 kbps + MSB Note: Future compatibility is guaranteed if the MSB [(2,2), (3,2), (3,3)] are used when 320kbpsMSB value is selected. Near end access: read-write Far end access: read-write (Traffic Node only) |
| BIT xfTermDCNRadioCapability | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.25 | Bits | read-only | Binary AND on contained MMUs DCN radio configuration capability. bits 210 000 undetermined 001 128kbps 010 320kbpsDCCr 100 320kbpsMSB ... 111 128kbps & 320kbpsDCCr & 320kbpsMSB |
| INT xfTermDCNLineConfiguration | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.26 | INTEGER | read-write | DCN line capacity for terminal. Legal values are: transparent(2) All RSOH bytes pass transparently over the hop. dcnLine192kbpsDCCr(3) (default) DCCr dcnLine192kbpsMSB(4) MSB Note: Future compatibility is guaranteed if the MSB [(2,2), (3,2), (3,3)] are used when 192kbpsMSB value is selected. Default value: dcnLine192kbpsDCCr(3) Near end access: read-write Far end access: read-write (Traffic Node only) |
| BIT xfTermDCNLineCapability | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.27 | Bits | read-only | Binary AND on contained MMUs DCN line configuration. bits 210 000 undetermined 001 transparent 010 192kbpsDCCr 100 192kbpsMSB ... 111 transparent & 192kbpsDCCr & 192kbpsMSB |
| INT xfTermFadeNotificationConfiguration | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.28 | INTEGER | read-write | This object enables or disables the notification suppress timer for Protection alarm. Default value: enabled(3), Near end access: read-write Far end access: read-write (Traffic Node only) |
| INT xfTermLineProtection | 1.3.6.1.4.1.193.81.3.4.1.1.1.1.29 | INTEGER | read-write | Administrative status of the line protection for a terminal physical line interface, e.g. MMU2 E and MMU2 F. Operational status is xfRLLineProtectionMode. Legal values are: other(1) (Not settable) unProtected(2) singleInterfaceLowSlot(3) SI low slot singleInterfaceHighSlot(4) SI high slot opticalSplitter(5) EEP equipmentAndLineProtection(6). ELP Default value: unProtected(2) Near end access: read-write Far end access: read-write (Traffic Node only) |
| xfRLPtpTerminalOutputPowerTable | 1.3.6.1.4.1.193.81.3.4.1.1.2 | not-accessible | Table for Radiolink point-to-points terminal output power managed objects. The tabled is indexed with entLogicalIndex. | |
| xfRLPtpTerminalOutputPowerEntry | 1.3.6.1.4.1.193.81.3.4.1.1.2.1 | not-accessible | An entry in the xfRLPtpTerminalOutputPowerTable | |
| TER xfTermOutputPowerOperStatus | 1.3.6.1.4.1.193.81.3.4.1.1.2.1.1 | TermOutputPowerStatus | read-only | This object shows the output power mode that is running. It is necessarily not equal to configured mode. |
| TER xfTermOutputPowerAdminStatus | 1.3.6.1.4.1.193.81.3.4.1.1.2.1.2 | TermOutputPowerStatus | read-write | This object sets the output mode of the terminal. Legal values are: - other(1) - rtpc(2) - atpc(3) - localControl(4) - ra1LocalControlRa2Rtpc(5) - ra1RtpcRa2LocalControl(6) Note, It is only possible to select atpc if xfTermAtpcCapability = supportsAtpc for both near end and far end terminal. Value other(1) not settable. Default value: rtpc(2) |
| INT xfTermAtpcCapability | 1.3.6.1.4.1.193.81.3.4.1.1.2.1.3 | INTEGER | read-only | This object shows the ATPC capability for the terminal, calculated as worst case capability for all units contained in the terminal. |
| xfRLPtpTerminalPerformanceTable | 1.3.6.1.4.1.193.81.3.4.1.1.4 | not-accessible | Table for performance data. For 1+0 systems performance data is calculated according to ITU-T Rec. G.826. For 1+1 systems - calculated as the combined performance of the protected terminal. 1+0 terminals uses ifindex for RAU IF 1+1 terminals uses ifindex for SWITCH IF | |
| xfRLPtpTerminalPerformanceEntry | 1.3.6.1.4.1.193.81.3.4.1.1.4.1 | not-accessible | An entry in the xfRLPtpTerminalPerformanceTable | |
| C32 xfTermTimeElapsed | 1.3.6.1.4.1.193.81.3.4.1.1.4.1.1 | Counter32 | read-only | The number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the agent will return the maximum value. |
| C32 xfTermCurrentES | 1.3.6.1.4.1.193.81.3.4.1.1.4.1.2 | Counter32 | read-only | This object shows the error seconds. |
| C32 xfTermCurrentSES | 1.3.6.1.4.1.193.81.3.4.1.1.4.1.3 | Counter32 | read-only | This object shows the severely error seconds. |
| C64 xfTermCurrentBBE | 1.3.6.1.4.1.193.81.3.4.1.1.4.1.4 | Counter64 | read-only | This object shows the background block errors. |
| C32 xfTermCurrentUAS | 1.3.6.1.4.1.193.81.3.4.1.1.4.1.5 | Counter32 | read-only | This object shows the unavailable seconds (or unavailable time). |
| C64 xfTermCurrentBB | 1.3.6.1.4.1.193.81.3.4.1.1.4.1.6 | Counter64 | read-only | This object shows the background blocks. |
| INT xfTermPerfReset | 1.3.6.1.4.1.193.81.3.4.1.1.4.1.7 | INTEGER | read-write | This object is used to reset the performance counters. It is settable also when the radio unit isn't present. Near end access: read-write Far end access: read-write (Traffic Node only) |
| C32 xfTermTimeElapsedEnRLBExt | 1.3.6.1.4.1.193.81.3.4.1.1.4.1.8 | Counter32 | read-only | The number of seconds that have elapsed in Enhanced RLB Extended capacity mode since RLB was enabled and the beginning of the current measurement period. |
| xfRLProtectionTable | 1.3.6.1.4.1.193.81.3.4.1.1.5 | not-accessible | Table for control and supervision of the protection mechanism | |
| xfRLProtectionEntry | 1.3.6.1.4.1.193.81.3.4.1.1.5.1 | not-accessible | An entry in the xfRLProtectionTable | |
| INT xfRLProtectionMode | 1.3.6.1.4.1.193.81.3.4.1.1.5.1.1 | INTEGER | read-only | This is the operational status of the protection mode. Default: unprotected(2) |
| I32 xfRLProtectionRau1 | 1.3.6.1.4.1.193.81.3.4.1.1.5.1.2 | Integer32 | read-only | entPhysicalIndex for RAU 1. |
| I32 xfRLProtectionRau2 | 1.3.6.1.4.1.193.81.3.4.1.1.5.1.3 | Integer32 | read-only | entPhysicalIndex for RAU 2. |
| INT xfRLActiveTxRadio | 1.3.6.1.4.1.193.81.3.4.1.1.5.1.4 | INTEGER | read-write | Active radio setting. Default value: txRadio1(1) |
| INT xfRLSwitchOverReset | 1.3.6.1.4.1.193.81.3.4.1.1.5.1.5 | INTEGER | read-write | Reset of the activated external alarms Tx Switch Over and Remote Tx Switch Over by resetting internal alarms. |
| INT xfRLSwitchRevertiveTx | 1.3.6.1.4.1.193.81.3.4.1.1.5.1.6 | INTEGER | read-write | Preferred Tx Radio. Default value: off(3) Near end access: read-write Far end access: read-only (Traffic Node only) |
| BIT xfRLProtectionCapability | 1.3.6.1.4.1.193.81.3.4.1.1.5.1.7 | Bits | read-only | This object shows the protection capabilities of the traffic node. Near end access: read-only Far end access: read-only |
| INT xfRLTxSwitchOverConfiguration | 1.3.6.1.4.1.193.81.3.4.1.1.5.1.8 | INTEGER | read-write | Indicates whether the remote Tx switching function and Tx switchover alarm are enabled. When disabled, the remote Tx switching function is disabled and Tx switchover alarm is never raised and xfRLSwitchOverReset is never needed to reset these alarms. - Other (1) - Disabled (2) (default) - Enabled (3) Near end access: read-write Far end access: read-write |
| xfRLLineProtectionTable | 1.3.6.1.4.1.193.81.3.4.1.1.6 | not-accessible | Table for line protection status. | |
| xfRLLineProtectionEntry | 1.3.6.1.4.1.193.81.3.4.1.1.6.1 | not-accessible | An entry in the xfRLLineProtectionTable | |
| BIT xfRLLineProtectionStatus | 1.3.6.1.4.1.193.81.3.4.1.1.6.1.1 | Bits | read-only | Extension to xfLineProtectionStatus. |
| INT xfRLLineProtectionMode | 1.3.6.1.4.1.193.81.3.4.1.1.6.1.2 | INTEGER | read-only | Operational status of the line protection for a terminal physical line interface, e.g. MMU2 E and MMU2 F. Administrative status is xfTermLineProtection. |
| xfRADIORSTable | 1.3.6.1.4.1.193.81.3.4.1.1.7 | not-accessible | Traffic node extension of ifTable. The tabled is indexed with ifIndex. | |
| xfRADIORSEntry | 1.3.6.1.4.1.193.81.3.4.1.1.7.1 | not-accessible | An entry in the xfRADIORSTable | |
| BIT xfRADIORSAlarms | 1.3.6.1.4.1.193.81.3.4.1.1.7.1.1 | Bits | read-only | This object shows rau rs related alarms. |
| xfRADIORSPerformanceTable | 1.3.6.1.4.1.193.81.3.4.1.1.8 | not-accessible | Traffic node extension of ifTable. The tabled is indexed with ifIndex. | |
| xfRADIORSPerformanceEntry | 1.3.6.1.4.1.193.81.3.4.1.1.8.1 | not-accessible | An entry in the xfRADIORSPerformanceTable | |
| BIT xfRADIORSPerformanceAlarms | 1.3.6.1.4.1.193.81.3.4.1.1.8.1.1 | Bits | read-only | This object shows RAU RS related alarms. |
| xfRLPMConfigTable | 1.3.6.1.4.1.193.81.3.4.1.1.9 | not-accessible | This table contains the alarm threshold values for RL PM | |
| xfRLPMConfigEntry | 1.3.6.1.4.1.193.81.3.4.1.1.9.1 | not-accessible | Entry in the xfRLPMConfigTable. | |
| I32 xfPMSetThreshold15mESs | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.1 | Integer32 | read-write | The 15 minute set threshold for ES. Default value is 180. Near end access: read-write Far end access: No access |
| I32 xfPMSetThreshold15mSESs | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.2 | Integer32 | read-write | The 15 minute set threshold for SES. Default value is 15. Near end access: read-write Far end access: No access |
| I32 xfPMSetThreshold15mBBEs | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.3 | Integer32 | read-write | The 15 minute set threshold for BBE. Default value is 9900. Near end access: read-write Far end access: No access |
| I32 xfPMResetThreshold15mESs | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.4 | Integer32 | read-write | The 15 minute reset threshold for ES. Default value is 20. Near end access: read-write Far end access: No access |
| I32 xfPMResetThreshold15mSESs | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.5 | Integer32 | read-write | The 15 minute reset threshold for SES. Default value is 1. Near end access: read-write Far end access: No access |
| I32 xfPMResetThreshold15mBBEs | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.6 | Integer32 | read-write | The 15 minute reset threshold for BBE. Default value is 200. Near end access: read-write Far end access: No access |
| I32 xfPMSetThreshold24hESs | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.7 | Integer32 | read-write | The 24 hours set threshold for ES. Default value is 1500. Near end access: read-write Far end access: No access |
| I32 xfPMSetThreshold24hSESs | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.8 | Integer32 | read-write | The 24 hours set threshold for SES. Default value is 20. Near end access: read-write Far end access: No access |
| I32 xfPMSetThreshold24hBBEs | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.9 | Integer32 | read-write | The 24 hours set threshold for BBE. Default value is 48000. Near end access: read-write Far end access: No access |
| INT xfPMView | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.10 | INTEGER | read-write | Enable/disable visibility of PM tables. Default value: pmEnable(1) Near end access: read-write Far end access: No access |
| BIT xfPMStatus | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.11 | Bits | read-only | Threshold alarm status. Values from rlts1Counter15m0(21) to tltmCounter24h2(50) are related to obsoleted MOs. |
| I32 xfPMRLTS1Threshold | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.12 | Integer32 | read-write | RLTS1 Alarm Threshold for Minimum RF Input Power. RF input level = value/10 dBm. Domain: [-99.9 ... -20.1 dBm] Valid for both 15 m & 24 h intervals. If changed current interval PM data must be reset. Always less than RLTS2, xfPMRLTS2Threshold. |
| I32 xfPMSetThreshold15mRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.13 | Integer32 | read-write | Received Level 1 Threshold Second (RLTS1) 15 minute. Alarm Set threshold in number of seconds that RF Input Power are allowed below the RLTS1 Alarm Threshold for Minimum RF Input Power in current 15 minute interval. Always greater than alarm Reset, xfPMResetThreshold15mRLTS1. |
| I32 xfPMResetThreshold15mRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.14 | Integer32 | read-write | Received Level 1 Threshold Second (RLTS1) 15 minute. Alarm Reset threshold in number of seconds that RF Input Power are allowed below the RLTS1 Alarm Threshold for Minimum RF Input Power for entire current 15 minute interval. Always less than alarm Set, xfPMSetThreshold15mRLTS1. |
| I32 xfPMRLTS2Threshold | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.15 | Integer32 | read-write | RLTS2 Alarm Threshold for Minimum RF Input Power. RF input level = value/10 dBm. Domain: [-99.8 ... -20.0 dBm] Valid for both 15 m & 24 h intervals. If changed current interval PM data must be reset. Always greater than RLTS1, xfPMRLTS1Threshold. |
| I32 xfPMSetThreshold15mRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.16 | Integer32 | read-write | Received Level 2 Threshold Second (RLTS2) 15 minute. Alarm Set threshold in number of seconds that RF Input Power are allowed below the RLTS2 Alarm Threshold for Minimum RF Input Power in current 15 minute interval. Always greater or equal to alarm Reset, xfPMResetThreshold15mRLTS2. |
| I32 xfPMResetThreshold15mRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.17 | Integer32 | read-write | Received Level 2 Threshold Second (RLTS2) 15 minute. Alarm Reset threshold in number of seconds that RF Input Power are allowed below the RLTS2 Alarm Threshold for Minimum RF Input Power for entire current 15 minute interval. Always less or equal to alarm Set, xfPMSetThreshold15mRLTS2. |
| I32 xfPMSetThreshold15mRLTM | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.18 | Integer32 | read-write | Receive Level Tide Mark (RLTM) 15 minute. Alarm Set threshold for maximum allowed max / min difference of RF Input Power in current 15 minute interval. RF input level = value/10 dB. Domain: [1.0 ... 80.0 dB] Always greater or equal to alarm Reset, xfPMResetThreshold15mRLTM. |
| I32 xfPMResetThreshold15mRLTM | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.19 | Integer32 | read-write | Receive Level Tide Mark (RLTM) 15 minute. Alarm Reset threshold for maximum allowed max / min difference of RF Input Power for entire current 15 minute interval. RF input level = value/10 dB. Domain: [1.0 ... 80.0 dB] Always less or equal to alarm Set, xfPMSetThreshold15mRLTM. |
| I32 xfPMTLTS1Threshold | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.20 | Integer32 | read-write | TLTS1 Alarm Threshold for Maximum RF Output Power. RF output level = value dBm. Domain: [-100 ... 45 dBm] Valid for both 15 m & 24 h intervals. If changed current interval PM data must be reset. |
| I32 xfPMSetThreshold15mTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.21 | Integer32 | read-write | Transmitted Levels 1 Threshold Second (TLTS1) 15 minute. Alarm Set threshold in number of seconds that RF Output Power are allowed above the TLTS1 Alarm Threshold for Maximum RF Output Power in current 15 minute interval. Always greater or equal to alarm Reset, xfPMResetThreshold15mTLTS1. |
| I32 xfPMResetThreshold15mTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.22 | Integer32 | read-write | Transmitted Levels 1 Threshold Second (TLTS1) 15 minute. Alarm Reset threshold in number of seconds that RF Output Power are allowed above the TLTS1 Alarm Threshold for Maximum RF Output Power for entire current 15 minute interval. Always less or equal to alarm Set, xfPMSetThreshold15mTLTS1. |
| I32 xfPMSetThreshold15mTLTM | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.23 | Integer32 | read-write | Transmitted Level Tide Mark (TLTM) 15 minute. Alarm Set threshold for maximum allowed max / min difference of RF Output Power in current 15 minute interval. RF output level = value dB. Domain: [1 ... 145 dB] Always greater or equal to alarm Reset, xfPMResetThreshold15mTLTM. |
| I32 xfPMResetThreshold15mTLTM | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.24 | Integer32 | read-write | Transmitted Level Tide Mark (TLTM) 15 minute. Alarm Reset threshold for maximum allowed max / min difference of RF Output Power for entire current 15 minute interval. RF output level = value dB. Domain: [1 ... 145 dB] Always less or equal to alarm Set, xfPMSetThreshold15mTLTM. |
| I32 xfPMSetThreshold24hRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.25 | Integer32 | read-write | Received Level 1 Threshold Second (RLTS1) 24 hour. Alarm Set / Reset threshold in number of seconds that RF Input Power are allowed below the RLTS1 Alarm Threshold for Minimum RF Input Power in current 24 hour interval. |
| I32 xfPMSetThreshold24hRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.26 | Integer32 | read-write | Received Level 2 Threshold Second (RLTS2) 24 hour. Alarm Set / Reset threshold in number of seconds that RF Input Power are allowed below the RLTS2 Alarm Threshold for Minimum RF Input Power in current 24 hour interval. |
| I32 xfPMSetThreshold24hRLTM | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.27 | Integer32 | read-write | Receive Level Tide Mark (RLTM) 24 hour. Alarm Set / Reset threshold for maximum allowed max / min difference of RF Input Power in current 24 hour interval. RF input level = value/10 dB. Domain: [1.0 ... 80.0 dB] |
| I32 xfPMSetThreshold24hTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.28 | Integer32 | read-write | Transmitted Levels 1 Threshold Second (TLTS1) 24 hour. Alarm Set / Reset threshold in number of seconds that RF Output Power are allowed above the TLTS1 Alarm Threshold for Maximum RF Output Power in current 24 hour interval. |
| I32 xfPMSetThreshold24hTLTM | 1.3.6.1.4.1.193.81.3.4.1.1.9.1.29 | Integer32 | read-write | Transmitted Level Tide Mark (TLTM) 24 hour. Alarm Set / Reset threshold for maximum allowed max / min difference of RF Output Power in current 24 hour interval. RF output level = value dB. Domain: [1 ... 145 dB] |
| xfRLPMCurrent24hTable | 1.3.6.1.4.1.193.81.3.4.1.1.10 | not-accessible | TBD | |
| xfRLPMCurrent24hEntry | 1.3.6.1.4.1.193.81.3.4.1.1.10.1 | not-accessible | Entry in the xfRLPMCurrent24hTable. | |
| C32 xfPMCurrent24hTimeElapsed | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.1 | Counter32 | read-only | The number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the agent will return the maximum value. |
| PER xfPMCurrent24hESs | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.2 | PerfCurrentCount | read-only | Errored Seconds in the current 24-hour interval. |
| PER xfPMCurrent24hSESs | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.3 | PerfCurrentCount | read-only | Severely Errored Seconds in the current 24-hour interval. |
| HCP xfPMCurrent24hBBEs | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.4 | HCPerfCurrentCount | read-only | Background Block Errors in the current 24 hour interval |
| PER xfPMCurrent24hUASs | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.5 | PerfCurrentCount | read-only | Unavailable seconds (or Unavailable Time) in the current 24 hour interval. |
| HCP xfPMCurrent24hBBs | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.6 | HCPerfCurrentCount | read-only | The number of Background Blocks in the current 24 hour interval. |
| I32 xfPMCurrent24hRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.7 | Integer32 | read-only | Received Level 1 Threshold Second (RLTS1) 24 hour. Number of seconds that the RF Input Power was below the RLTS1 in the current 24 hour interval. -1 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMCurrent24hRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.8 | Integer32 | read-only | Received Level 2 Threshold Second (RLTS2) 24 hour. Number of seconds that the RF Input Power was below the RLTS2 in the current 24 hour interval. -1 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMCurrent24hRLMin | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.9 | Integer32 | read-only | Indicate Min RF Input level in current 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMCurrent24hRLMax | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.10 | Integer32 | read-only | Indicate Max RF Input level in current 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMCurrent24hTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.11 | Integer32 | read-only | Transmitted Level 1 Threshold Second (TLTS1) 24 hour. Number of seconds that the RF Output Power was above the TLTS1 in the current 24 hour interval -1 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMCurrent24hTLMin | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.12 | Integer32 | read-only | Indicate Min RF Output level in current 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMCurrent24hTLMax | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.13 | Integer32 | read-only | Indicate Max RF Output level in current 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMCurrent24hMSEMin | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.14 | Integer32 | read-only | Indicate Min MSE level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMCurrent24hMSEMax | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.15 | Integer32 | read-only | Indicate Max MSE level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMCurrent24hXPIMin | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.16 | Integer32 | read-only | Indicate Min Cross-Polar Interference (XPI) level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMCurrent24hXPIMax | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.17 | Integer32 | read-only | Indicate Max Cross-Polar Interference (XPI) level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. |
| PER xfPMCurrent24hESR | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.18 | PerfCurrentCount | read-only | Error Seconds Ratio in the current 24-hour interval |
| PER xfPMCurrent24hSESR | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.19 | PerfCurrentCount | read-only | Severely Error Seconds Ratio in the current 24-hour interval |
| HCP xfPMCurrent24hBBER | 1.3.6.1.4.1.193.81.3.4.1.1.10.1.20 | HCPerfCurrentCount | read-only | Background Block Errors Ratio in the current 24-hour interval |
| xfRLPMInterval24hTable | 1.3.6.1.4.1.193.81.3.4.1.1.11 | not-accessible | TBD | |
| xfRLPMInterval24hEntry | 1.3.6.1.4.1.193.81.3.4.1.1.11.1 | not-accessible | Entry in the xfRLPMInterval24hTable. | |
| NUM xfPMInterval24hESs | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.1 | PerfIntervalCount | read-only | The counter associated with the number of Errored Seconds encountered by a SONET/SDH Section in the previous 24-hour interval. |
| NUM xfPMInterval24hSESs | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.2 | PerfIntervalCount | read-only | The counter associated with the number of Severely Errored Seconds encountered by a SONET/SDH Section in the previous 24-hour interval. |
| HCP xfPMInterval24hBBEs | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.3 | HCPerfCurrentCount | read-only | The counter associated with the number of Coding Violations (Errored Blocks) encountered by a SONET/SDH Section in the previous 24-hour interval. |
| NUM xfPMInterval24hUASs | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.4 | PerfIntervalCount | read-only | The number of UnAvailable Seconds encountered by a SONET/SDH Section in the previous 24 hour interval. |
| HCP xfPMInterval24hBBs | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.5 | HCPerfCurrentCount | read-only | The number of Background Blocks in a SONET/SDH Section in the previous 24 hour interval. |
| T/F xfPMInterval24hValidData | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.6 | TruthValue | read-only | This variable indicates whether the data for this interval is valid. |
| I32 xfPMInterval24hRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.7 | Integer32 | read-only | Received Level 1 Threshold Second (RLTS1) 24 hour. Number of seconds that the RF Input Power was below the RLTS1 in the previous 24 hour interval. -1 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMInterval24hRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.8 | Integer32 | read-only | Received Level 2 Threshold Second (RLTS2) 24 hour. Number of seconds that the RF Input Power was below the RLTS2 in the previous 24 hour interval. -1 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMInterval24hRLMin | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.9 | Integer32 | read-only | Indicate Min RF Input level in previous 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMInterval24hRLMax | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.10 | Integer32 | read-only | Indicate Max RF Input level in previous 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMInterval24hTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.11 | Integer32 | read-only | Transmitted Level 1 Threshold Second (TLTS1) 24 hour. Number of seconds that the RF Output Power was above the TLTS1 in the previous 24 hour interval -1 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMInterval24hTLMin | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.12 | Integer32 | read-only | Indicate Min RF Output level in previous 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMInterval24hTLMax | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.13 | Integer32 | read-only | Indicate Max RF Output level in previous 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMInterval24hMSEMin | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.14 | Integer32 | read-only | Indicate Min MSE level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMInterval24hMSEMax | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.15 | Integer32 | read-only | Indicate Max MSE level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMInterval24hXPIMin | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.16 | Integer32 | read-only | Indicate Min Cross-Polar Interference (XPI) level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMInterval24hXPIMax | 1.3.6.1.4.1.193.81.3.4.1.1.11.1.17 | Integer32 | read-only | Indicate Max Cross-Polar Interference (XPI) level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. |
| xfRLPMCurrent15mTable | 1.3.6.1.4.1.193.81.3.4.1.1.12 | not-accessible | TBD | |
| xfRLPMCurrent15mEntry | 1.3.6.1.4.1.193.81.3.4.1.1.12.1 | not-accessible | Entry in the table. | |
| C32 xfPMCurrent15mElapsedTime | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.1 | Counter32 | read-only | The number of seconds that have elapsed since the beginning of the current error-measurement period. |
| PER xfPMCurrent15mESs | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.2 | PerfCurrentCount | read-only | Error seconds in the current 15 minute interval. |
| PER xfPMCurrent15mSESs | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.3 | PerfCurrentCount | read-only | Severely error seconds in the current 15 minute interval. |
| PER xfPMCurrent15mBBEs | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.4 | PerfCurrentCount | read-only | Background Block Errors in the current 15 minute interval. |
| PER xfPMCurrent15mUASs | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.5 | PerfCurrentCount | read-only | Unavailable seconds (or Unavailable Time) in the current 15 minute interval. |
| PER xfPMCurrent15mBBs | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.6 | PerfCurrentCount | read-only | The number of Background Blocks encountered by a SONET/SDH Section in the current 15 minute interval. |
| I32 xfPMCurrent15mRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.7 | Integer32 | read-only | Received Level 1 Threshold Second (RLTS1) 15 minute Number of seconds that the RF Input Power was below the RLTS1 in the current 15 minute interval. -1 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMCurrent15mRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.8 | Integer32 | read-only | Received Level 2 Threshold Second (RLTS2) 15 minute Number of seconds that the RF Input Power was below the RLTS2 in the current 15 minute interval. -1 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMCurrent15mRLMin | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.9 | Integer32 | read-only | Indicate Min RF Input level in current 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMCurrent15mRLMax | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.10 | Integer32 | read-only | Indicate Max RF Input level in current 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMCurrent15mTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.11 | Integer32 | read-only | Transmitted Level 1 Threshold Second (TLTS1) 15 minute Number of seconds that the RF Output Power was above the TLTS1 in the current 15 minute interval -1 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMCurrent15mTLMin | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.12 | Integer32 | read-only | Indicate Min RF Output level in current 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMCurrent15mTLMax | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.13 | Integer32 | read-only | Indicate Max RF Output level in current 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMCurrent15mMSEMin | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.14 | Integer32 | read-only | Indicate Min MSE level in current 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMCurrent15mMSEMax | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.15 | Integer32 | read-only | Indicate Max MSE level in current 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMCurrent15mXPIMin | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.16 | Integer32 | read-only | Indicate Min Cross-Polar Interference (XPI) level in current 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMCurrent15mXPIMax | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.17 | Integer32 | read-only | Indicate Max Cross-Polar Interference (XPI) level in current 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. |
| PER xfPMCurrent15mESR | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.18 | PerfCurrentCount | read-only | Error Seconds Ratio in the current 15 minute interval |
| PER xfPMCurrent15mSESR | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.19 | PerfCurrentCount | read-only | Severely Error Seconds Ratio in the current 15 minute interval |
| HCP xfPMCurrent15mBBER | 1.3.6.1.4.1.193.81.3.4.1.1.12.1.20 | HCPerfCurrentCount | read-only | Background Block Errors Ratio in the current 15 minute interval |
| xfRLPMInterval15mTable | 1.3.6.1.4.1.193.81.3.4.1.1.13 | not-accessible | TBD | |
| xfRLPMInterval15mEntry | 1.3.6.1.4.1.193.81.3.4.1.1.13.1 | not-accessible | Entry in the table. | |
| I32 xfPMInterval15mIntervalNumber | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.1 | Integer32 | read-only | A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. |
| NUM xfPMInterval15mESs | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.2 | PerfIntervalCount | read-only | Error seconds in the xfPMInterval15mIntervalNumber 15 minute interval |
| NUM xfPMInterval15mSESs | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.3 | PerfIntervalCount | read-only | Severely error seconds in the xfPDHCompInterval15mIntervalNumber 15 minute interval. |
| NUM xfPMInterval15mBBEs | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.4 | PerfIntervalCount | read-only | Background Block Errors in the xfPDHCompInterval15mIntervalNumber 15 minute intervall. |
| NUM xfPMInterval15mUASs | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.5 | PerfIntervalCount | read-only | UnAvailable Seconds in the xfPDHCompInterval15mIntervalNumber 15 minute interval. |
| NUM xfPMInterval15mBBs | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.6 | PerfIntervalCount | read-only | Background blocks in the xfPDHCompInterval15mIntervalNumber 15 minute interval. |
| T/F xfPMInterval15mValidData | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.7 | TruthValue | read-only | This variable indicates if the data for this interval is valid. |
| I32 xfPMInterval15mRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.8 | Integer32 | read-only | Received Level 1 Threshold Second (RLTS1) 15 minute Number of seconds that the RF Input Power was below the RLTS1 in the previous 15 minute interval. -1 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMInterval15mRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.9 | Integer32 | read-only | Received Level 2 Threshold Second (RLTS2) 15 minute Number of seconds that the RF Input Power was below the RLTS2 in the previous 15 minute interval. -1 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMInterval15mRLMin | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.10 | Integer32 | read-only | Indicate Min RF Input level in previous 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMInterval15mRLMax | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.11 | Integer32 | read-only | Indicate Max RF Input level in previous 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMInterval15mTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.12 | Integer32 | read-only | Transmitted Level 1 Threshold Second (TLTS1) 15 minute Number of seconds that the RF Output Power was above the TLTS1 in the previous 15 minute interval -1 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMInterval15mTLMin | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.13 | Integer32 | read-only | Indicate Min RF Output level in previous 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMInterval15mTLMax | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.14 | Integer32 | read-only | Indicate Max RF Output level in previous 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMInterval15mMSEMin | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.15 | Integer32 | read-only | Indicate Min MSE level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMInterval15mMSEMax | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.16 | Integer32 | read-only | Indicate Max MSE level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMInterval15mXPIMin | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.17 | Integer32 | read-only | Indicate Min Cross-Polar Interference (XPI) level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. |
| I32 xfPMInterval15mXPIMax | 1.3.6.1.4.1.193.81.3.4.1.1.13.1.18 | Integer32 | read-only | Indicate Max Cross-Polar Interference (XPI) level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. Reset by xfTermPerfReset. |
| xfRLPtpTerminalXTable | 1.3.6.1.4.1.193.81.3.4.1.1.14 | not-accessible | Extension table to xfRLPtpTerminalTable. The table is indexed with entLogicalIndex. | |
| xfRLPtpTerminalXEntry | 1.3.6.1.4.1.193.81.3.4.1.1.14.1 | not-accessible | Entry in the table | |
| INT xfTermInterfaces | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.1 | INTEGER | read-write | Interface constellation for the terminal |
| BIT xfTermInterfacesCapability | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.2 | Bits | read-only | Interface constellation capability for the terminal |
| CHA xfTermChannelModeOperStatus | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.3 | ChannelMode | read-only | Channel mode for the terminal (operational status). - ccdp(2): Co-Channel Dual Polarization (XPIC) - accp(3): Adjacent Channels Co-Polarization (non-XPIC) - acap(4): Adjacent Channels Alternate Polarization (non-XPIC) |
| INT xfTermXPICRestore | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.4 | INTEGER | read-write | Restore XPIC |
| I32 xfTermTribCapacityActual | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.5 | Integer32 | read-only | Actual tributary capacity |
| I32 xfTermTribCapacityDesired | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.6 | Integer32 | read-write | Desired tributary capacity |
| I32 xfTermBitPipeCapacity | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.7 | Integer32 | read-only | Bit pipe capacity, Kbps |
| I32 xfTermRowIndex | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.8 | Integer32 | read-write | Points to a row in xfRlPtpTerminalCapabilityTable |
| TIK xfTermCapabilitiesLastChange | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.9 | TimeTicks | read-only | The value of sysUpTime at the time of the last creation or deletion of an entry in the xfRLPtpTerminalCapabilityTable. If the number of entries has been unchanged since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| I32 xfTermActualRowIndex | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.10 | Integer32 | read-only | The actual row that is pointed out in xfRlPtpTerminalCapabilityTable |
| I32 xfTermMaxRowIndex | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.11 | Integer32 | read-write | Points to a row in xfRlPtpTerminalCapabilityTable where the maximum capacity is, including license |
| I32 xfTermAdaptiveManualRowIndex | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.12 | Integer32 | read-write | Manual row index |
| TER xfTermAdaptiveManualMode | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.13 | TermAdaptiveManualMode | read-write | Adaptive manual mode - other(1) - disable(2)(default) - enable(3) - enabledAsRequest(4) |
| INT xfTermSpectrumEfficiencyClass | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.14 | INTEGER | read-write | Spectrum Efficiency Class: - other(1): unknown - sec2(2): spectrum eff. Class 2 - sec3(3): spectrum eff. Class 3 - sec4L(4): spectrum eff. Class 4L - sec4H(5): specturm eff. Class 4H - sec5A(6): spectrum eff. Class 5A - sec5B(7): spectrum eff. Class 5B - sec6A(8): spectrum eff. Class 6A - sec6B(9): spectrum eff. Class 6B Near end access: read-write Far end access: read-write (Traffic Node), read-only (other) |
| BIT xfTermSpectrumEfficiencyClassCapability | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.15 | Bits | read-only | Spectrum Efficiency Class Capability - 0 Sec2 Spectrum eff. Class 2 - 1 Sec3 Specturm eff. Class 3 - 2 Sec4L Specturm eff. Class 4L - 3 Sec4H Spectrum eff. Class 4H - 4 Sec5A Spectrum eff. Class 5A - 5 Sec5B Spectrum eff. Class 5B - 6 Sec6A Spectrum eff. Class 6A - 7 Sec6B Spectrum eff. Class 6B |
| IP xfTermIpAddress | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.16 | IpAddress | read-only | LAN ip address |
| BIT xfTermProtectionCapability | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.17 | Bits | read-only | Terminal protection capability - 0 Unprotected ............... The terminal supports 1+0 - 1 protectedHotStandby ....... The terminal supports 1+1 Hot Standby - 2 protectedWorkingStandby ... The terminal supports 1+1 Working Standby - 3 unprotectedSD ............. The terminal supports 1+0 with Space diversity - 4 nplus1 .................... The terminal supports N+1 protection (through RPS board) - 5 enhancedRLB ............... The terminal supports Enhanced Radio Link Bonding |
| BIT xfTermLineProtectionCapability | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.18 | Bits | read-only | Terminal Line protection capability - 0 unprotected ................. - 1 singleInterfaceLowSlot ...... - 2 singleInterfaceHighSlot ..... - 3 opticalSplitter ............. - 4 equipmentAndLineProtection .. |
| BIT xfTermTribAllocationActual | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.19 | Bits | read-only | Actual tributary allocation in a MMU2 D or MMU2 H, the rest is packet link |
| BIT xfTermTribAllocationDesired | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.20 | Bits | read-write | Desired tibutary allocation in a MMU2 D or MMU2 H, the rest is packet link |
| TER xfTermAutoRemoveLoopEnable | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.21 | TermAutoRemoveLoopEnable | read-write | Auto Remove Loops - other(1) - enable(2) (default) - disable(3) |
| BIT xfTermCapability | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.22 | Bits | read-only | Terminal capability |
| INT xfTermCapacityLicense | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.23 | INTEGER | read-write | Licensetable |
| INT xfTermFadingRates | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.24 | INTEGER | read-write | Fading rates - other(1): unknown - fr50(2): 50dB/s HighTroughputMode (default) - fr150(3): 100dB/s HighFadingResistanceMode |
| BIT xfTermFadingRatesCapability | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.25 | Bits | read-only | Fading rate capability - fr50(0): HighTroughputMode - fr100(1): HighFadingResistanceMode |
| I32 xfTermConfiguredBitPipeCapacity | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.26 | Integer32 | read-only | Configured bit pipe capacity, Kbps |
| I32 xfTermTribCapacityConfigured | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.27 | Integer32 | read-only | Configured tributary capacity |
| I32 xfTermPacketMaxCapacity | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.28 | Integer32 | read-only | Packet Max Capacity |
| I32 xfTermPacketMinCapacity | 1.3.6.1.4.1.193.81.3.4.1.1.14.1.29 | Integer32 | read-only | Packet Min Capacity |
| xfRlPtpTerminalCapabilityTable | 1.3.6.1.4.1.193.81.3.4.1.1.15 | not-accessible | Table for misc. capability informatio. | |
| xfRlPtpTerminalCapabilityEntry | 1.3.6.1.4.1.193.81.3.4.1.1.15.1 | not-accessible | Entry in the table | |
| INT xfTermChannelSpacing | 1.3.6.1.4.1.193.81.3.4.1.1.15.1.1 | INTEGER | read-only | Channel spacing - ETSI: 3.5, 7, 14, 28, 40, 56 MHz - ANSI: 10, 20, 30, 40, 50, 60 MHz |
| TER xfTermChannelModulation | 1.3.6.1.4.1.193.81.3.4.1.1.15.1.2 | TermModulation | read-only | Channel modulation - cqpsk(2) CQPSK - qam16(3) 16-QAM - qam128(4) 128-QAM - qam32(5) 32-QAM - qam64(6) 64-QAM - qam4(7) 4-QAM - qam8(8) 8-QAM - qam256(9) 256-QAM - qam512(10) 512-QAM - qam1024(11) 1024-QAM |
| I32 xfTermMaxTribCapacity | 1.3.6.1.4.1.193.81.3.4.1.1.15.1.3 | Integer32 | read-only | Max number of tributaries |
| I32 xfTermDCNCapacity | 1.3.6.1.4.1.193.81.3.4.1.1.15.1.4 | Integer32 | read-only | DCN hop capacity |
| INT xfTermValidRow | 1.3.6.1.4.1.193.81.3.4.1.1.15.1.5 | INTEGER | read-only | Max capacity license - vr0(0) = invalid row - vr10(1) = 10 Mbps, no license - vr25(2) = 25 Mbps - vr50(3) = 50 Mbps - vr100(4) = 100 Mbps - vr15(5) = 15 Mbps - vr30(6) = 30 Mbps - vr60(7) = 60 Mbps - vr125(8) = 125 Mbps - vr200(9) = 200 Mbps - vr350(10) = 350 Mbps - vr4(11) = 4 Mbps, no license - vr500(12) = 500 Mbps - vr150(13) = 150 Mbps - vr250(14) = 250 Mbps - vr300(15) = 300 Mbps - vr400(16) = 400 Mbps - vr450(17) = 450 Mbps |
| I32 xfTermMaxCapacity | 1.3.6.1.4.1.193.81.3.4.1.1.15.1.6 | Integer32 | read-only | Max capacity |
| TER xfTermSpectrumEfficiencyClassObsolete | 1.3.6.1.4.1.193.81.3.4.1.1.15.1.7 | TermRauSec | read-only | xfTermSpectrumEfficiencyClassObsolete |
| INT xfTermFrameFormatType | 1.3.6.1.4.1.193.81.3.4.1.1.15.1.8 | INTEGER | read-only | Frame format type - fftOther(0) - fftStatic(1) - fftAdmod(2) - fftXpic(3) - fftXpicAdmod(4) - fftLegacy(5) - fftStaticLH(6) - fftAdmodLH(7) - fftXpicLH(8) - fftXpicAdmodLH(9) - fftAdmodStatic(10) - fftXpicAdmodStatic(11) - fftAdmodStaticLH(12) - fftXpicAdmodStaticLH(13) |
| INT xfTermFrameFormatRev | 1.3.6.1.4.1.193.81.3.4.1.1.15.1.9 | INTEGER | read-only | Frame format revision |
| BIT xfTermBerAlarmThresholdCapability | 1.3.6.1.4.1.193.81.3.4.1.1.15.1.10 | Bits | read-only | List of the allowed BER thresholds |
| xfRLPMAMConfigTable | 1.3.6.1.4.1.193.81.3.4.1.1.16 | not-accessible | Alarm threshold values for RL PM | |
| xfRLPMAMConfigEntry | 1.3.6.1.4.1.193.81.3.4.1.1.16.1 | not-accessible | Entry in the xfRLPMAMConfigTable | |
| I32 xfPMAMSetThreshold15m | 1.3.6.1.4.1.193.81.3.4.1.1.16.1.1 | Integer32 | read-write | The 15 minute set threshold for AdMod. Near end access: read-write Far end access: No access |
| I32 xfPMAMSetThreshold24h | 1.3.6.1.4.1.193.81.3.4.1.1.16.1.2 | Integer32 | read-write | The 24 hour set threshold for AdMod. Near end access: read-write Far end access: No access |
| I32 xfPMAMResetThreshold15m | 1.3.6.1.4.1.193.81.3.4.1.1.16.1.3 | Integer32 | read-write | The 15 minute reset threshold for AdMod. Near end access: read-write Far end access: No access |
| BIT xfPMAMStatus | 1.3.6.1.4.1.193.81.3.4.1.1.16.1.4 | Bits | read-only | Threshold alarm status |
| BIT xfPMAMValidData | 1.3.6.1.4.1.193.81.3.4.1.1.16.1.5 | Bits | read-only | It reports which modulation's PM data that are valid. |
| xfRLPMAMCurrent24hTable | 1.3.6.1.4.1.193.81.3.4.1.1.17 | not-accessible | TBD | |
| xfRLPMAMCurrent24hEntry | 1.3.6.1.4.1.193.81.3.4.1.1.17.1 | not-accessible | Entry in the xfRLPMAMCurrent24hTable. | |
| PER xfPMAMCurrent24h4QAM | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.1 | PerfCurrentCount | read-only | Valid time since reset |
| PER xfPMAMCurrent24h8QAM | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.2 | PerfCurrentCount | read-only | Valid time since reset |
| PER xfPMAMCurrent24h16QAM | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.3 | PerfCurrentCount | read-only | Valid time since reset |
| PER xfPMAMCurrent24h32QAM | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.4 | PerfCurrentCount | read-only | Valid time since reset |
| PER xfPMAMCurrent24h64QAM | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.5 | PerfCurrentCount | read-only | Valid time since reset |
| PER xfPMAMCurrent24h128QAM | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.6 | PerfCurrentCount | read-only | Valid time since reset |
| PER xfPMAMCurrent24h256QAM | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.7 | PerfCurrentCount | read-only | Valid time since reset |
| PER xfPMAMCurrent24h512QAM | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.8 | PerfCurrentCount | read-only | Valid time since reset |
| PER xfPMAMCurrent24h1024QAM | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.9 | PerfCurrentCount | read-only | Valid time since reset |
| PER xfPMAMCurrent24h4QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.10 | PerfCurrentCount | read-only | Valid time since reset |
| PER xfPMAMCurrent24h8QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.11 | PerfCurrentCount | read-only | Valid time since reset |
| PER xfPMAMCurrent24h16QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.12 | PerfCurrentCount | read-only | Valid time since reset |
| PER xfPMAMCurrent24h32QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.13 | PerfCurrentCount | read-only | Valid time since reset |
| PER xfPMAMCurrent24h64QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.14 | PerfCurrentCount | read-only | Valid time since reset |
| PER xfPMAMCurrent24h128QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.15 | PerfCurrentCount | read-only | Valid time since reset |
| PER xfPMAMCurrent24h256QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.16 | PerfCurrentCount | read-only | Valid time since reset |
| PER xfPMAMCurrent24h512QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.17 | PerfCurrentCount | read-only | Valid time since reset |
| PER xfPMAMCurrent24h1024QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.17.1.18 | PerfCurrentCount | read-only | Valid time since reset |
| xfRLPMAMInterval24hTable | 1.3.6.1.4.1.193.81.3.4.1.1.18 | not-accessible | TBD | |
| xfRLPMAMInterval24hEntry | 1.3.6.1.4.1.193.81.3.4.1.1.18.1 | not-accessible | Entry in the xfRLPMAMInterval24hTable. | |
| NUM xfPMAMInterval24h4QAM | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.1 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval24h8QAM | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.2 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval24h16QAM | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.3 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval24h32QAM | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.4 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval24h64QAM | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.5 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval24h128QAM | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.6 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval24h256QAM | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.7 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval24h512QAM | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.8 | PerfIntervalCount | read-only | Interval count. |
| T/F xfPMAMInterval24hValidData | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.9 | TruthValue | read-only | This variable indicates whether the data for this interval is valid. |
| NUM xfPMAMInterval24h1024QAM | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.10 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval24h4QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.11 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval24h8QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.12 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval24h16QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.13 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval24h32QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.14 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval24h64QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.15 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval24h128QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.16 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval24h256QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.17 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval24h512QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.18 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval24h1024QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.18.1.19 | PerfIntervalCount | read-only | Interval count. |
| xfRLPMAMCurrent15mTable | 1.3.6.1.4.1.193.81.3.4.1.1.19 | not-accessible | TBD | |
| xfRLPMAMCurrent15mEntry | 1.3.6.1.4.1.193.81.3.4.1.1.19.1 | not-accessible | Entry in the table. | |
| PER xfPMAMCurrent15m4QAM | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.1 | PerfCurrentCount | read-only | Valid interval time since reset. |
| PER xfPMAMCurrent15m8QAM | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.2 | PerfCurrentCount | read-only | Valid interval time since reset. |
| PER xfPMAMCurrent15m16QAM | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.3 | PerfCurrentCount | read-only | Valid interval time since reset. |
| PER xfPMAMCurrent15m32QAM | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.4 | PerfCurrentCount | read-only | Valid interval time since reset. |
| PER xfPMAMCurrent15m64QAM | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.5 | PerfCurrentCount | read-only | Valid interval time since reset. |
| PER xfPMAMCurrent15m128QAM | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.6 | PerfCurrentCount | read-only | Valid interval time since reset. |
| PER xfPMAMCurrent15m256QAM | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.7 | PerfCurrentCount | read-only | Valid interval time since reset. |
| PER xfPMAMCurrent15m512QAM | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.8 | PerfCurrentCount | read-only | Valid interval time since reset. |
| PER xfPMAMCurrent15m1024QAM | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.9 | PerfCurrentCount | read-only | Valid interval time since reset. |
| PER xfPMAMCurrent15m4QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.10 | PerfCurrentCount | read-only | Valid interval time since reset. |
| PER xfPMAMCurrent15m8QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.11 | PerfCurrentCount | read-only | Valid interval time since reset. |
| PER xfPMAMCurrent15m16QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.12 | PerfCurrentCount | read-only | Valid interval time since reset. |
| PER xfPMAMCurrent15m32QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.13 | PerfCurrentCount | read-only | Valid interval time since reset. |
| PER xfPMAMCurrent15m64QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.14 | PerfCurrentCount | read-only | Valid interval time since reset. |
| PER xfPMAMCurrent15m128QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.15 | PerfCurrentCount | read-only | Valid interval time since reset. |
| PER xfPMAMCurrent15m256QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.16 | PerfCurrentCount | read-only | Valid interval time since reset. |
| PER xfPMAMCurrent15m512QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.17 | PerfCurrentCount | read-only | Valid interval time since reset. |
| PER xfPMAMCurrent15m1024QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.19.1.18 | PerfCurrentCount | read-only | Valid interval time since reset. |
| xfRLPMAMInterval15mTable | 1.3.6.1.4.1.193.81.3.4.1.1.20 | not-accessible | TBD | |
| xfRLPMAMInterval15mEntry | 1.3.6.1.4.1.193.81.3.4.1.1.20.1 | not-accessible | Entry in the table. | |
| I32 xfPMAMInterval15mIntervalNumber | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.1 | Integer32 | read-only | A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. |
| NUM xfPMAMInterval15m4QAM | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.2 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval15m8QAM | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.3 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval15m16QAM | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.4 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval15m32QAM | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.5 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval15m64QAM | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.6 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval15m128QAM | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.7 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval15m256QAM | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.8 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval15m512QAM | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.9 | PerfIntervalCount | read-only | Interval count. |
| T/F xfPMAMInterval15mValidData | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.10 | TruthValue | read-only | This variable indicates whether the data for this interval is valid. |
| NUM xfPMAMInterval15m1024QAM | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.11 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval15m4QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.12 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval15m8QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.13 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval15m16QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.14 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval15m32QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.15 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval15m64QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.16 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval15m128QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.17 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval15m256QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.18 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval15m512QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.19 | PerfIntervalCount | read-only | Interval count. |
| NUM xfPMAMInterval15m1024QAMEnRLB | 1.3.6.1.4.1.193.81.3.4.1.1.20.1.20 | PerfIntervalCount | read-only | Interval count. |
| xfRLPtpTerminalCapacityLicenseTable | 1.3.6.1.4.1.193.81.3.4.1.1.21 | not-accessible | TBD | |
| xfRLPtpTerminalCapacityLicenseEntry | 1.3.6.1.4.1.193.81.3.4.1.1.21.1 | not-accessible | Entry in the table. | |
| INT xfTermCapacityLicenseRange | 1.3.6.1.4.1.193.81.3.4.1.1.21.1.1 | INTEGER | read-only | xfTermCapacityLicenseRange |
| I32 xfTermMaxCapacityRange | 1.3.6.1.4.1.193.81.3.4.1.1.21.1.2 | Integer32 | read-only | TermMaxCapacityRange |
| I32 xfTermMaxTribCapacityRange | 1.3.6.1.4.1.193.81.3.4.1.1.21.1.3 | Integer32 | read-only | xfTermMaxTribCapacityRange |
| xfRLPMSDCGainCurrent15mTable | 1.3.6.1.4.1.193.81.3.4.1.1.22 | not-accessible | This table monitors the time spent in each SDC gain value in the current 15 minute period. | |
| xfRLPMSDCGainCurrent15mEntry | 1.3.6.1.4.1.193.81.3.4.1.1.22.1 | not-accessible | Entry in xfRLPMSDCGainCurrent15mTable. | |
| PER xfPMSDCGainCurrent15m0005dB | 1.3.6.1.4.1.193.81.3.4.1.1.22.1.1 | PerfCurrentCount | read-only | The number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB. |
| PER xfPMSDCGainCurrent15m0510dB | 1.3.6.1.4.1.193.81.3.4.1.1.22.1.2 | PerfCurrentCount | read-only | The number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB. |
| PER xfPMSDCGainCurrent15m1015dB | 1.3.6.1.4.1.193.81.3.4.1.1.22.1.3 | PerfCurrentCount | read-only | The number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB. |
| PER xfPMSDCGainCurrent15m1520dB | 1.3.6.1.4.1.193.81.3.4.1.1.22.1.4 | PerfCurrentCount | read-only | The number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB. |
| PER xfPMSDCGainCurrent15m2025dB | 1.3.6.1.4.1.193.81.3.4.1.1.22.1.5 | PerfCurrentCount | read-only | The number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB. |
| PER xfPMSDCGainCurrent15m2530dB | 1.3.6.1.4.1.193.81.3.4.1.1.22.1.6 | PerfCurrentCount | read-only | The number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB. |
| xfRLPMSDCGainInterval15mTable | 1.3.6.1.4.1.193.81.3.4.1.1.23 | not-accessible | This table collects the time spent in each SDC gain value for the 15 minute intervals. | |
| xfRLPMSDCGainInterval15mEntry | 1.3.6.1.4.1.193.81.3.4.1.1.23.1 | not-accessible | Entry in xfRLPMSDCGainInterval15mTable. | |
| I32 xfPMSDCGainInterval15mIntervalNumber | 1.3.6.1.4.1.193.81.3.4.1.1.23.1.1 | Integer32 | read-only | A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. |
| NUM xfPMSDCGainInterval15m0005dB | 1.3.6.1.4.1.193.81.3.4.1.1.23.1.2 | PerfIntervalCount | read-only | The number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB. |
| NUM xfPMSDCGainInterval15m0510dB | 1.3.6.1.4.1.193.81.3.4.1.1.23.1.3 | PerfIntervalCount | read-only | The number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB. |
| NUM xfPMSDCGainInterval15m1015dB | 1.3.6.1.4.1.193.81.3.4.1.1.23.1.4 | PerfIntervalCount | read-only | The number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB. |
| NUM xfPMSDCGainInterval15m1520dB | 1.3.6.1.4.1.193.81.3.4.1.1.23.1.5 | PerfIntervalCount | read-only | The number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB. |
| NUM xfPMSDCGainInterval15m2025dB | 1.3.6.1.4.1.193.81.3.4.1.1.23.1.6 | PerfIntervalCount | read-only | The number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB. |
| NUM xfPMSDCGainInterval15m2530dB | 1.3.6.1.4.1.193.81.3.4.1.1.23.1.7 | PerfIntervalCount | read-only | The number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB. |
| xfRLPMSDCGainCurrent24hTable | 1.3.6.1.4.1.193.81.3.4.1.1.24 | not-accessible | This table monitors the time spent in each SDC gain value in the current 24 hours period. | |
| xfRLPMSDCGainCurrent24hEntry | 1.3.6.1.4.1.193.81.3.4.1.1.24.1 | not-accessible | Entry in xfRLPMSDCGainCurrent24hTable. | |
| PER xfPMSDCGainCurrent24h0005dB | 1.3.6.1.4.1.193.81.3.4.1.1.24.1.1 | PerfCurrentCount | read-only | The number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB. |
| PER xfPMSDCGainCurrent24h0510dB | 1.3.6.1.4.1.193.81.3.4.1.1.24.1.2 | PerfCurrentCount | read-only | The number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB. |
| PER xfPMSDCGainCurrent24h1015dB | 1.3.6.1.4.1.193.81.3.4.1.1.24.1.3 | PerfCurrentCount | read-only | The number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB. |
| PER xfPMSDCGainCurrent24h1520dB | 1.3.6.1.4.1.193.81.3.4.1.1.24.1.4 | PerfCurrentCount | read-only | The number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB. |
| PER xfPMSDCGainCurrent24h2025dB | 1.3.6.1.4.1.193.81.3.4.1.1.24.1.5 | PerfCurrentCount | read-only | The number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB. |
| PER xfPMSDCGainCurrent24h2530dB | 1.3.6.1.4.1.193.81.3.4.1.1.24.1.6 | PerfCurrentCount | read-only | The number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB. |
| xfRLPMSDCGainInterval24hTable | 1.3.6.1.4.1.193.81.3.4.1.1.25 | not-accessible | This table collects the time spent in each SDC gain value for the 24 hours interval. | |
| xfRLPMSDCGainInterval24hEntry | 1.3.6.1.4.1.193.81.3.4.1.1.25.1 | not-accessible | Entry in xfRLPMSDCGainInterval24hTable. | |
| NUM xfPMSDCGainInterval24h0005dB | 1.3.6.1.4.1.193.81.3.4.1.1.25.1.1 | PerfIntervalCount | read-only | The number of seconds the SDC gain has been in the range: (0.0 <= SdcGain < 0.5) dB. |
| NUM xfPMSDCGainInterval24h0510dB | 1.3.6.1.4.1.193.81.3.4.1.1.25.1.2 | PerfIntervalCount | read-only | The number of seconds the SDC gain has been in the range: (0.5 <= SdcGain < 1.0) dB. |
| NUM xfPMSDCGainInterval24h1015dB | 1.3.6.1.4.1.193.81.3.4.1.1.25.1.3 | PerfIntervalCount | read-only | The number of seconds the SDC gain has been in the range: (1.0 <= SdcGain < 1.5) dB. |
| NUM xfPMSDCGainInterval24h1520dB | 1.3.6.1.4.1.193.81.3.4.1.1.25.1.4 | PerfIntervalCount | read-only | The number of seconds the SDC gain has been in the range: (1.5 <= SdcGain < 2.0) dB. |
| NUM xfPMSDCGainInterval24h2025dB | 1.3.6.1.4.1.193.81.3.4.1.1.25.1.5 | PerfIntervalCount | read-only | The number of seconds the SDC gain has been in the range: (2.0 <= SdcGain < 2.5) dB. |
| NUM xfPMSDCGainInterval24h2530dB | 1.3.6.1.4.1.193.81.3.4.1.1.25.1.6 | PerfIntervalCount | read-only | The number of seconds the SDC gain has been in the range: (2.5 <= SdcGain < 3.0) dB. |
| xfRLPMSDCGainConfigTable | 1.3.6.1.4.1.193.81.3.4.1.1.26 | not-accessible | xfRLPMSDCGainConfigTable contains thresholds for setting and resetting alarms for SDC Gain PM data in SDC current and interval tables. | |
| xfRLPMSDCGainConfigEntry | 1.3.6.1.4.1.193.81.3.4.1.1.26.1 | not-accessible | Entry in xfRLPMSDCGainConfigTable. | |
| I32 xfPMSDCGainSetThreshold15m | 1.3.6.1.4.1.193.81.3.4.1.1.26.1.1 | Integer32 | read-write | The 15 minute set threshold for the lowest SDC Gain interval: 0 - 0.5 dB. Default value is 180. |
| I32 xfPMSDCGainSetThreshold24h | 1.3.6.1.4.1.193.81.3.4.1.1.26.1.2 | Integer32 | read-write | The 24 hour set threshold for the lowest SDC Gain interval: 0 - 0.5 dB. Default value is 1500. |
| I32 xfPMSDCGainResetThreshold15m | 1.3.6.1.4.1.193.81.3.4.1.1.26.1.3 | Integer32 | read-write | The 15 minute reset threshold for the lowest SDC Gain interval: 0 - 0.5 dB. Default value is 20. |
| BIT xfPMSDCGainStatus | 1.3.6.1.4.1.193.81.3.4.1.1.26.1.4 | Bits | read-only | Threshold crossing SDC alarm status. |
| xfRLExtRFPMConfigTable | 1.3.6.1.4.1.193.81.3.4.1.1.27 | not-accessible | This table contains the alarm threshold values for RL Extended RF PM. Its index id the RF IF ifIndex. | |
| xfRLExtRFPMConfigEntry | 1.3.6.1.4.1.193.81.3.4.1.1.27.1 | not-accessible | Entry in the xfRLExtRFPMConfigTable. | |
| I32 xfExtRFPMRLTS1Threshold | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.1 | Integer32 | read-write | RLTS1 Alarm Threshold for Minimum RF Input Power. RF input level = value/10 dBm. Domain: [-99.9 ... -20.1 dBm] Valid for both 15 m & 24 h intervals. If changed current interval PM data must be reset. Always less than RLTS2, xfExtRFPMRLTS2Threshold. |
| I32 xfExtRFPMSetThreshold15mRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.2 | Integer32 | read-write | Received Level 1 Threshold Second (RLTS1) 15 minute. Alarm Set threshold in number of seconds that RF Input Power are allowed below the RLTS1 Alarm Threshold for Minimum RF Input Power in current 15 minute interval. Always greater than alarm Reset, xfExtRFPMResetThreshold15mRLTS1. |
| I32 xfExtRFPMResetThreshold15mRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.3 | Integer32 | read-write | Received Level 1 Threshold Second (RLTS1) 15 minute. Alarm Reset threshold in number of seconds that RF Input Power are allowed below the RLTS1 Alarm Threshold for Minimum RF Input Power for entire current 15 minute interval. Always less than alarm Set, xfPMSetThreshold15mRLTS1. |
| I32 xfExtRFPMRLTS2Threshold | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.4 | Integer32 | read-write | RLTS2 Alarm Threshold for Minimum RF Input Power. RF input level = value/10 dBm. Domain: [-99.8 ... -20.0 dBm] Valid for both 15 m & 24 h intervals. If changed current interval PM data must be reset. Always greater than RLTS1, xfExtRFPMRLTS1Threshold. |
| I32 xfExtRFPMSetThreshold15mRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.5 | Integer32 | read-write | Received Level 2 Threshold Second (RLTS2) 15 minute. Alarm Set threshold in number of seconds that RF Input Power are allowed below the RLTS2 Alarm Threshold for Minimum RF Input Power in current 15 minute interval. Always greater or equal to alarm Reset, xfExtRFPMResetThreshold15mRLTS2. |
| I32 xfExtRFPMResetThreshold15mRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.6 | Integer32 | read-write | Received Level 2 Threshold Second (RLTS2) 15 minute. Alarm Reset threshold in number of seconds that RF Input Power are allowed below the RLTS2 Alarm Threshold for Minimum RF Input Power for entire current 15 minute interval. Always less or equal to alarm Set, xfExtRFPMSetThreshold15mRLTS2. |
| I32 xfExtRFPMSetThreshold15mRLTM | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.7 | Integer32 | read-write | Receive Level Tide Mark (RLTM) 15 minute. Alarm Set threshold for maximum allowed max / min difference of RF Input Power in current 15 minute interval. RF input level = value/10 dB. Domain: [1.0 ... 80.0 dB] Always greater or equal to alarm Reset, xfExtRFPMResetThreshold15mRLTM. |
| I32 xfExtRFPMResetThreshold15mRLTM | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.8 | Integer32 | read-write | Receive Level Tide Mark (RLTM) 15 minute. Alarm Reset threshold for maximum allowed max / min difference of RF Input Power for entire current 15 minute interval. RF input level = value/10 dB. Domain: [1.0 ... 80.0 dB] Always less or equal to alarm Set, xfExtRFPMSetThreshold15mRLTM. |
| I32 xfExtRFPMTLTS1Threshold | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.9 | Integer32 | read-write | TLTS1 Alarm Threshold for Maximum RF Output Power. RF output level = value dBm. Domain: [-100 ... 45 dBm] Valid for both 15 m & 24 h intervals. If changed current interval PM data must be reset. |
| I32 xfExtRFPMSetThreshold15mTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.10 | Integer32 | read-write | Transmitted Levels 1 Threshold Second (TLTS1) 15 minute. Alarm Set threshold in number of seconds that RF Output Power are allowed above the TLTS1 Alarm Threshold for Maximum RF Output Power in current 15 minute interval. Always greater or equal to alarm Reset, xfExtRFPMResetThreshold15mTLTS1. |
| I32 xfExtRFPMResetThreshold15mTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.11 | Integer32 | read-write | Transmitted Levels 1 Threshold Second (TLTS1) 15 minute. Alarm Reset threshold in number of seconds that RF Output Power are allowed above the TLTS1 Alarm Threshold for Maximum RF Output Power for entire current 15 minute interval. Always less or equal to alarm Set, xfExtRFPMSetThreshold15mTLTS1. |
| I32 xfExtRFPMSetThreshold15mTLTM | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.12 | Integer32 | read-write | Transmitted Level Tide Mark (TLTM) 15 minute. Alarm Set threshold for maximum allowed max / min difference of RF Output Power in current 15 minute interval. RF output level = value dB. Domain: [1 ... 145 dB] Always greater or equal to alarm Reset, xfExtRFPMResetThreshold15mTLTM. |
| I32 xfExtRFPMResetThreshold15mTLTM | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.13 | Integer32 | read-write | Transmitted Level Tide Mark (TLTM) 15 minute. Alarm Reset threshold for maximum allowed max / min difference of RF Output Power for entire current 15 minute interval. RF output level = value dB. Domain: [1 ... 145 dB] Always less or equal to alarm Set, xfExtRFPMSetThreshold15mTLTM. |
| I32 xfExtRFPMSetThreshold24hRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.14 | Integer32 | read-write | Received Level 1 Threshold Second (RLTS1) 24 hour. Alarm Set / Reset threshold in number of seconds that RF Input Power are allowed below the RLTS1 Alarm Threshold for Minimum RF Input Power in current 24 hour interval. |
| I32 xfExtRFPMSetThreshold24hRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.15 | Integer32 | read-write | Received Level 2 Threshold Second (RLTS2) 24 hour. Alarm Set / Reset threshold in number of seconds that RF Input Power are allowed below the RLTS2 Alarm Threshold for Minimum RF Input Power in current 24 hour interval. |
| I32 xfExtRFPMSetThreshold24hRLTM | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.16 | Integer32 | read-write | Receive Level Tide Mark (RLTM) 24 hour. Alarm Set / Reset threshold for maximum allowed max / min difference of RF Input Power in current 24 hour interval. RF input level = value/10 dB. Domain: [1.0 ... 80.0 dB] |
| I32 xfExtRFPMSetThreshold24hTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.17 | Integer32 | read-write | Transmitted Levels 1 Threshold Second (TLTS1) 24 hour. Alarm Set / Reset threshold in number of seconds that RF Output Power are allowed above the TLTS1 Alarm Threshold for Maximum RF Output Power in current 24 hour interval. |
| I32 xfExtRFPMSetThreshold24hTLTM | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.18 | Integer32 | read-write | Transmitted Level Tide Mark (TLTM) 24 hour. Alarm Set / Reset threshold for maximum allowed max / min difference of RF Output Power in current 24 hour interval. RF output level = value dB. Domain: [1 ... 145 dB] |
| BIT xfExtRFPMStatus | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.19 | Bits | read-only | Threshold alarm status |
| INT xfExtRFPMView | 1.3.6.1.4.1.193.81.3.4.1.1.27.1.20 | INTEGER | read-write | Enable/disable visibility of PM tables. Default value: extPmEnable(1) Near end access: read-write Far end access: No access |
| xfRLExtRFPMCurrent24hTable | 1.3.6.1.4.1.193.81.3.4.1.1.28 | not-accessible | Current 24h Extended RF PM table. Its index is RF IF ifIndex | |
| xfRLExtRFPMCurrent24hEntry | 1.3.6.1.4.1.193.81.3.4.1.1.28.1 | not-accessible | Entry in the xfRLExtRFPMCurrent24hTable. | |
| C32 xfExtRFPMCurrent24hElapsedTime | 1.3.6.1.4.1.193.81.3.4.1.1.28.1.1 | Counter32 | read-only | The number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the agent will return the maximum value. |
| I32 xfExtRFPMCurrent24hRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.28.1.2 | Integer32 | read-only | Received Level 1 Threshold Second (RLTS1) 24 hour. Number of seconds that the RF Input Power was below the RLTS1 in the current 24 hour interval. -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRFPMCurrent24hRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.28.1.3 | Integer32 | read-only | Received Level 2 Threshold Second (RLTS2) 24 hour. Number of seconds that the RF Input Power was below the RLTS2 in the current 24 hour interval. -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRFPMCurrent24hRLMin | 1.3.6.1.4.1.193.81.3.4.1.1.28.1.4 | Integer32 | read-only | Indicate Min RF Input level in current 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRFPMCurrent24hRLMax | 1.3.6.1.4.1.193.81.3.4.1.1.28.1.5 | Integer32 | read-only | Indicate Max RF Input level in current 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRFPMCurrent24hTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.28.1.6 | Integer32 | read-only | Transmitted Level 1 Threshold Second (TLTS1) 24 hour. Number of seconds that the RF Output Power was above the TLTS1 in the current 24 hour interval -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRFPMCurrent24hTLMin | 1.3.6.1.4.1.193.81.3.4.1.1.28.1.7 | Integer32 | read-only | Indicate Min RF Output level in current 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRFPMCurrent24hTLMax | 1.3.6.1.4.1.193.81.3.4.1.1.28.1.8 | Integer32 | read-only | Indicate Max RF Output level in current 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| xfRLExtRFPMInterval24hTable | 1.3.6.1.4.1.193.81.3.4.1.1.29 | not-accessible | Interval 24h Extended RF PM table. Its index is RF IF ifIndex | |
| xfRLExtRFPMInterval24hEntry | 1.3.6.1.4.1.193.81.3.4.1.1.29.1 | not-accessible | Entry in the xfRLExtRFPMInterval24hTable. | |
| I32 xfExtRFPMInterval24hRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.29.1.1 | Integer32 | read-only | Received Level 1 Threshold Second (RLTS1) 24 hour. Number of seconds that the RF Input Power was below the RLTS1 in the previous 24 hour interval. -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRFPMInterval24hRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.29.1.2 | Integer32 | read-only | Received Level 2 Threshold Second (RLTS2) 24 hour. Number of seconds that the RF Input Power was below the RLTS2 in the previous 24 hour interval. -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRFPMInterval24hRLMin | 1.3.6.1.4.1.193.81.3.4.1.1.29.1.3 | Integer32 | read-only | Indicate Min RF Input level in previous 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRFPMInterval24hRLMax | 1.3.6.1.4.1.193.81.3.4.1.1.29.1.4 | Integer32 | read-only | Indicate Max RF Input level in previous 24 hour interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRFPMInterval24hTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.29.1.5 | Integer32 | read-only | Transmitted Level 1 Threshold Second (TLTS1) 24 hour. Number of seconds that the RF Output Power was above the TLTS1 in the previous 24 hour interval -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRFPMInterval24hTLMin | 1.3.6.1.4.1.193.81.3.4.1.1.29.1.6 | Integer32 | read-only | Indicate Min RF Output level in previous 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRFPMInterval24hTLMax | 1.3.6.1.4.1.193.81.3.4.1.1.29.1.7 | Integer32 | read-only | Indicate Max RF Output level in previous 24 hour interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| T/F xfExtRFPMInterval24hValidData | 1.3.6.1.4.1.193.81.3.4.1.1.29.1.8 | TruthValue | read-only | This variable indicates whether the data for this interval is valid. |
| xfRLExtRFPMCurrent15mTable | 1.3.6.1.4.1.193.81.3.4.1.1.30 | not-accessible | Current 15m Extended RF PM table. Its index is RF IF ifIndex | |
| xfRLExtRFPMCurrent15mEntry | 1.3.6.1.4.1.193.81.3.4.1.1.30.1 | not-accessible | Entry in the table. | |
| C32 xfExtRFPMCurrent15mElapsedTime | 1.3.6.1.4.1.193.81.3.4.1.1.30.1.1 | Counter32 | read-only | The number of seconds that have elapsed since the beginning of the current error-measurement period. |
| I32 xfExtRFPMCurrent15mRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.30.1.2 | Integer32 | read-only | Received Level 1 Threshold Second (RLTS1) 15 minute Number of seconds that the RF Input Power was below the RLTS1 in the current 15 minute interval. -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRFPMCurrent15mRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.30.1.3 | Integer32 | read-only | Received Level 2 Threshold Second (RLTS2) 15 minute Number of seconds that the RF Input Power was below the RLTS2 in the current 15 minute interval. -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRFPMCurrent15mRLMin | 1.3.6.1.4.1.193.81.3.4.1.1.30.1.4 | Integer32 | read-only | Indicate Min RF Input level in current 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRFPMCurrent15mRLMax | 1.3.6.1.4.1.193.81.3.4.1.1.30.1.5 | Integer32 | read-only | Indicate Max RF Input level in current 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRFPMCurrent15mTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.30.1.6 | Integer32 | read-only | Transmitted Level 1 Threshold Second (TLTS1) 15 minute Number of seconds that the RF Output Power was above the TLTS1 in the current 15 minute interval -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRFPMCurrent15mTLMin | 1.3.6.1.4.1.193.81.3.4.1.1.30.1.7 | Integer32 | read-only | Indicate Min RF Output level in current 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRFPMCurrent15mTLMax | 1.3.6.1.4.1.193.81.3.4.1.1.30.1.8 | Integer32 | read-only | Indicate Max RF Output level in current 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| xfRLExtRFPMInterval15mTable | 1.3.6.1.4.1.193.81.3.4.1.1.31 | not-accessible | Interval 15m Extended RF PM table. Its index is RF IF ifIndex | |
| xfRLExtRFPMInterval15mEntry | 1.3.6.1.4.1.193.81.3.4.1.1.31.1 | not-accessible | Entry in the table. | |
| I32 xfExtRFPMInterval15mIntervalNumber | 1.3.6.1.4.1.193.81.3.4.1.1.31.1.1 | Integer32 | read-only | A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. |
| I32 xfExtRFPMInterval15mRLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.31.1.2 | Integer32 | read-only | Received Level 1 Threshold Second (RLTS1) 15 minute Number of seconds that the RF Input Power was below the RLTS1 in the previous 15 minute interval. -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRFPMInterval15mRLTS2 | 1.3.6.1.4.1.193.81.3.4.1.1.31.1.3 | Integer32 | read-only | Received Level 2 Threshold Second (RLTS2) 15 minute Number of seconds that the RF Input Power was below the RLTS2 in the previous 15 minute interval. -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRFPMInterval15mRLMin | 1.3.6.1.4.1.193.81.3.4.1.1.31.1.4 | Integer32 | read-only | Indicate Min RF Input level in previous 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRFPMInterval15mRLMax | 1.3.6.1.4.1.193.81.3.4.1.1.31.1.5 | Integer32 | read-only | Indicate Max RF Input level in previous 15 minute interval. RF input level = value/10 dBm. Domain: [-99.9 ... -20.0 dBm] 0 (zero) indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRFPMInterval15mTLTS1 | 1.3.6.1.4.1.193.81.3.4.1.1.31.1.6 | Integer32 | read-only | Transmitted Level 1 Threshold Second (TLTS1) 15 minute Number of seconds that the RF Output Power was above the TLTS1 in the previous 15 minute interval -1 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRFPMInterval15mTLMin | 1.3.6.1.4.1.193.81.3.4.1.1.31.1.7 | Integer32 | read-only | Indicate Min RF Output level in previous 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRFPMInterval15mTLMax | 1.3.6.1.4.1.193.81.3.4.1.1.31.1.8 | Integer32 | read-only | Indicate Max RF Output level in previous 15 minute interval. RF output level = value dBm. Domain: [-100 ... 45 dBm] 255 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| T/F xfExtRFPMInterval15mValidData | 1.3.6.1.4.1.193.81.3.4.1.1.31.1.9 | TruthValue | read-only | This variable indicates if the data for this interval is valid. |
| xfRLExtRAUPMCurrent24hTable | 1.3.6.1.4.1.193.81.3.4.1.1.32 | not-accessible | Current 24h Extended RAU PM table. Its index is RAU IF ifIndex | |
| xfRLExtRAUPMCurrent24hEntry | 1.3.6.1.4.1.193.81.3.4.1.1.32.1 | not-accessible | Entry in the xfRLExtRAUPMCurrent24hTable. | |
| C32 xfExtRAUPMCurrent24hElapsedTime | 1.3.6.1.4.1.193.81.3.4.1.1.32.1.1 | Counter32 | read-only | The number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the agent will return the maximum value. |
| I32 xfExtRAUPMCurrent24hMSEMin | 1.3.6.1.4.1.193.81.3.4.1.1.32.1.2 | Integer32 | read-only | Indicate Min MSE level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRAUPMCurrent24hMSEMax | 1.3.6.1.4.1.193.81.3.4.1.1.32.1.3 | Integer32 | read-only | Indicate Max MSE level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRAUPMCurrent24hXPIMin | 1.3.6.1.4.1.193.81.3.4.1.1.32.1.4 | Integer32 | read-only | Indicate Min Cross-Polar Interference (XPI) level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRAUPMCurrent24hXPIMax | 1.3.6.1.4.1.193.81.3.4.1.1.32.1.5 | Integer32 | read-only | Indicate Max Cross-Polar Interference (XPI) level in current 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| xfRLExtRAUPMInterval24hTable | 1.3.6.1.4.1.193.81.3.4.1.1.33 | not-accessible | Interval 24h Extended RAU PM table. Its index is RAU IF ifIndex | |
| xfRLExtRAUPMInterval24hEntry | 1.3.6.1.4.1.193.81.3.4.1.1.33.1 | not-accessible | Entry in the xfRLExtRAUPMInterval24hTable. | |
| I32 xfExtRAUPMInterval24hMSEMin | 1.3.6.1.4.1.193.81.3.4.1.1.33.1.1 | Integer32 | read-only | Indicate Min MSE level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRAUPMInterval24hMSEMax | 1.3.6.1.4.1.193.81.3.4.1.1.33.1.2 | Integer32 | read-only | Indicate Max MSE level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRAUPMInterval24hXPIMin | 1.3.6.1.4.1.193.81.3.4.1.1.33.1.3 | Integer32 | read-only | Indicate Min Cross-Polar Interference (XPI) level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRAUPMInterval24hXPIMax | 1.3.6.1.4.1.193.81.3.4.1.1.33.1.4 | Integer32 | read-only | Indicate Max Cross-Polar Interference (XPI) level in previous 24 hour interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| T/F xfExtRAUPMInterval24hValidData | 1.3.6.1.4.1.193.81.3.4.1.1.33.1.5 | TruthValue | read-only | This variable indicates whether the data for this interval is valid. |
| xfRLExtRAUPMCurrent15mTable | 1.3.6.1.4.1.193.81.3.4.1.1.34 | not-accessible | Current 15m Extended RAU PM table. Its index is RF IF ifIndex | |
| xfRLExtRAUPMCurrent15mEntry | 1.3.6.1.4.1.193.81.3.4.1.1.34.1 | not-accessible | Entry in the xfRLExtRAUPMCurrent15mTable. | |
| C32 xfExtRAUPMCurrent15mElapsedTime | 1.3.6.1.4.1.193.81.3.4.1.1.34.1.1 | Counter32 | read-only | The number of seconds that have elapsed since the beginning of the current error-measurement period. If the current interval exceeds the maximum value, the agent will return the maximum value. |
| I32 xfExtRAUPMCurrent15mMSEMin | 1.3.6.1.4.1.193.81.3.4.1.1.34.1.2 | Integer32 | read-only | Indicate Min MSE level in current 15 mimute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRAUPMCurrent15mMSEMax | 1.3.6.1.4.1.193.81.3.4.1.1.34.1.3 | Integer32 | read-only | Indicate Max MSE level in current 15 mimute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRAUPMCurrent15mXPIMin | 1.3.6.1.4.1.193.81.3.4.1.1.34.1.4 | Integer32 | read-only | Indicate Min Cross-Polar Interference (XPI) level in current 15 mimute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRAUPMCurrent15mXPIMax | 1.3.6.1.4.1.193.81.3.4.1.1.34.1.5 | Integer32 | read-only | Indicate Max Cross-Polar Interference (XPI) level in current 15 mimute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| xfRLExtRAUPMInterval15mTable | 1.3.6.1.4.1.193.81.3.4.1.1.35 | not-accessible | Interval 15 Extended RAU PM table. Its index is RAU IF ifIndex | |
| xfRLExtRAUPMInterval15mEntry | 1.3.6.1.4.1.193.81.3.4.1.1.35.1 | not-accessible | Entry in the xfRLExtRAUPMInterval15mTable. | |
| I32 xfExtRAUPMInterval15mIntervalNumber | 1.3.6.1.4.1.193.81.3.4.1.1.35.1.1 | Integer32 | read-only | A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. |
| I32 xfExtRAUPMInterval15mMSEMin | 1.3.6.1.4.1.193.81.3.4.1.1.35.1.2 | Integer32 | read-only | Indicate Min MSE level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRAUPMInterval15mMSEMax | 1.3.6.1.4.1.193.81.3.4.1.1.35.1.3 | Integer32 | read-only | Indicate Max MSE level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRAUPMInterval15mXPIMin | 1.3.6.1.4.1.193.81.3.4.1.1.35.1.4 | Integer32 | read-only | Indicate Min Cross-Polar Interference (XPI) level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| I32 xfExtRAUPMInterval15mXPIMax | 1.3.6.1.4.1.193.81.3.4.1.1.35.1.5 | Integer32 | read-only | Indicate Max Cross-Polar Interference (XPI) level in previous 15 minute interval. Input level = value/10 dB. Domain: [-100.0 ... 100.0 dB] 2000 indicates invalid value. The instances are reset by: * xfTermPerfReset in xfRLPtpTerminalPerformanceTable for MMU2 X / MMU3 X * xfPMPerfReset in xfRLPMContinuousCounterTable for MMU4 / MMU1002 |
| T/F xfExtRAUPMInterval15mValidData | 1.3.6.1.4.1.193.81.3.4.1.1.35.1.6 | TruthValue | read-only | This variable indicates whether the data for this interval is valid. |
| xfRadioLinkPtpTerminalConformance | 1.3.6.1.4.1.193.81.3.4.1.2 | |||
| xfRadioLinkPtpTerminalCompliances | 1.3.6.1.4.1.193.81.3.4.1.2.1 | |||
| xfRadioLinkPtpTerminalFullCompliance | 1.3.6.1.4.1.193.81.3.4.1.2.1.1 | The compliance statement for SNMP entities which implement everything. | ||
| xfRadioLinkPtpTerminalGroups | 1.3.6.1.4.1.193.81.3.4.1.2.2 | |||
| xfRadioLinkPtpTerminalCompleteGroup | 1.3.6.1.4.1.193.81.3.4.1.2.2.1 | A collection of all current objects in this MIB module. | ||
| xfRadioLinkPtpTerminalObsoleteGroup | 1.3.6.1.4.1.193.81.3.4.1.2.2.2 | A collection of all obsolete objects in this MIB module. |
RFC description
XF vendor MIB for point-to-point radio link terminal management and performance monitoring.
Start monitoring Ericsson MINI-LINK point-to-point radio terminal (alarm-state/link-availability status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.