All MIBs › XF-RADIOLINK-PTP-TERMINAL-MIB › xfTermCapacity
xfTermCapacity
Module: XF-RADIOLINK-PTP-TERMINAL-MIB
OID (symbolic): XF-RADIOLINK-PTP-TERMINAL-MIB::xfTermCapacity
OID (numeric): 1.3.6.1.4.1.193.81.3.4.1.1.1.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object sets the capacity on the terminal * other - Unknown * twoE1 - 2x2 Mbps * fourE1 - 4*2 Mbps (only rlMLE) * oneE2 - 8 Mbps * twoE2 - 2x8 Mbps * oneE3oneE1 - 34+2 Mbps * twoE3 - 2x34 Mbps * fourE3 - 4*34 Mbps * fourDS1 - 4xDS1 * eightDS1 - 8xDS1 * sixteenDS1 - 16*DS1 * seventeenDS1 - 16DS1+DS1 * oneStm0 - STM-0 * oneStm1oneE1 - STM-1+2 * thirtytwoDS1 - 32xDS1 * oneStm1oneDS1 - STM-1+DS1 * oneStm1oneE1at50MHz - STM-1+2 Mpbs @ 50 MHz * twentytwoE1 - 22xE1 * thirtyfiveE1 - 35xE1 * fortysixE1 - 46xE1 * seventyfiveE1 - 75xE1 * oneStm1OneJ1 - 1xSTM-1 + 1xJ1 * sixtynineDS1 - 69xDS1 * eightyDS1 - 80xDS1 * oneStm1OneE1LH - STM-1+2 for LH * oneStm1OneDS1LH - STM-1+DS1 for LH
Default value PDH CQPSK ETSI: twoE1(2) MMU2, MMU2 B, MMU2 C Default value PDH CQPSK ANSI: fourDS1(9) MMU2 BA, MMU2 CA Default value PDH QAM ETSI: twentytwoE1(18) MMU2 D Default value PDH QAM ANSI: sixtynineDS1(23) MMU2 DA Default value SDH ETSI: oneStm1oneE1(14) MMU2 E, MMU2 F Default value SDH ANSI: oneStm1oneDS1(16) MMU2 E, MMU2 F
Near end access: read-write Far end access: read-write (Traffic Node), read-only (MLE)
Note that setting far end xfTermCapacity will remove far end traffic cross connects.
oneStm1oneE1(14) and oneStm1oneE1at50MHz(17) has the same capacity and modulation but at different bandwidth, hence the two values.
Capacities above 2xE1 for MMU2 B OFH, MMU2 C OFH, ATU and ATU B OFH are under license control.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.193.81.3.4.1.1.1.1.4 snmpwalk -v2c -c public <target> XF-RADIOLINK-PTP-TERMINAL-MIB::xfTermCapacity
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.193.81.3.4.1.1.1.1.4.1 snmpget -v2c -c public <target> XF-RADIOLINK-PTP-TERMINAL-MIB::xfTermCapacity.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.193.81.3.4.1.1.1.1.4.1 i <value>
Start monitoring Ericsson MINI-LINK point-to-point radio terminal (alarm-state/link-availability status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the XF-RADIOLINK-PTP-TERMINAL-MIB::xfTermCapacity OID value, configure state conditions and alerts, and monitor any Ericsson MINI-LINK point-to-point radio terminal (alarm-state/link-availability status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.193 | ericsson | ANS-COMMON-MIB |
| 1.3.6.1.4.1.193.81 | miniLinkXF | XF-TOP-MIB |
| 1.3.6.1.4.1.193.81.3 | xfMediaSpecific | XF-TOP-MIB |
| 1.3.6.1.4.1.193.81.3.4 | xfRadioLink | XF-TOP-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.193.81.3.4.1 | xfRadioLinkPtpTerminalMIB | XF-RADIOLINK-PTP-TERMINAL-MIB |
| 1.3.6.1.4.1.193.81.3.4.1.1 | xfRadioLinkPtpTerminalObjects | XF-RADIOLINK-PTP-TERMINAL-MIB |
| 1.3.6.1.4.1.193.81.3.4.1.1.1 | xfRLPtpTerminalTable | XF-RADIOLINK-PTP-TERMINAL-MIB |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1 | xfRLPtpTerminalEntry | XF-RADIOLINK-PTP-TERMINAL-MIB |
| 1.3.6.1.4.1.193.81.3.4.1.1.1.1.4 | xfTermCapacity | XF-RADIOLINK-PTP-TERMINAL-MIB |