XF-RADIOLINK-PTP-MODEM-MIB

All MIBs › XF-RADIOLINK-PTP-MODEM-MIB

Organization: Ericsson AB

Last Updated: 2012-05-29

Category: Ericsson Radio Link

Description: Monitors Ericsson XF point-to-point radio link modem configuration, modulation status, and performance.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is XF-RADIOLINK-PTP-MODEM-MIB?

XF-RADIOLINK-PTP-MODEM-MIB is an Ericsson AB proprietary MIB for point-to-point Radiolink microwave modems. Its modem table, keyed by index, records MMU (Modem Modulator Unit) alarm status, module-index-validity, ATPC (Automatic Transmit Power Control) capability, modulation/capacity capability, protection path, slot position, channel-mode capability, channel companion slot/index, interface capability, and RAU (Radio Access Unit) supply voltage, while a RAU-interface table records loopback enable/RX-loop state and alarms, a LINE/RS table records alarms, and a modem-capability table extends detection. As a configuration/status MIB it lets an administrator confirm ATPC/protection-path settings and watch modem/RAU alarm status on an Ericsson Radiolink point-to-point microwave link. It is deployed on Ericsson AB Radiolink point-to-point microwave modems. Engineers can download the XF-RADIOLINK-PTP-MODEM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in XF-RADIOLINK-PTP-MODEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ericsson AB Radiolink point-to-point microwave modems

Monitoring Examples

An administrator checks xfMMUAlarmStatus and xfRAUIFAlarms to diagnose an active alarm condition on an Ericsson Radiolink point-to-point microwave modem.

What Can Be Monitored

modem/RAU alarm status and ATPC/protection configuration

Imported Objects

From ENTITY-MIB

entPhysicalIndex

OBJECT-TYPE

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

TEXTUAL-CONVENTION

From XF-RADIOLINK-PTP-TERMINAL-MIB

xfTermRowIndex

OBJECT-TYPE

From XF-TOP-MIB

xfRadioLink

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
BIT xfLINERSAlarms	1.3.6.1.4.1.193.81.3.4.2.1.3.1.1	Bits	read-only	This object shows line rs related alarms.
xfLINERSEntry	1.3.6.1.4.1.193.81.3.4.2.1.3.1		not-accessible	An entry in the xfLINERSTable
xfLINERSTable	1.3.6.1.4.1.193.81.3.4.2.1.3		not-accessible	Traffic node extension of ifTable. The tabled is indexed with ifIndex.
MMU xfMMUAlarmStatus	1.3.6.1.4.1.193.81.3.4.2.1.1.1.1	MMUAlarmStatus	read-only	This object shows the alarm status of the modem.
MMU xfMMUAtpcCapability	1.3.6.1.4.1.193.81.3.4.2.1.1.1.3	MMUAtpcCapability	read-only	This object shows the atpc capability.
BIT xfMMUBerAlarmThresholdCapability	1.3.6.1.4.1.193.81.3.4.2.1.4.1.8	Bits	read-only	List of the allowed BER thresholds.
MMU xfMMUCapacityCapability	1.3.6.1.4.1.193.81.3.4.2.1.1.1.5	MMUCapCapability	read-only	This object shows the capacity capability.
I32 xfMMUChannelCompanionIndex	1.3.6.1.4.1.193.81.3.4.2.1.1.1.10	Integer32	read-only	0 if CCDP not selected entPhysicalIndex of companion channel MMU (XPIC/CCDP) according to xfMMUChannelCompanionSlot setting.
I32 xfMMUChannelCompanionSlot	1.3.6.1.4.1.193.81.3.4.2.1.1.1.9	Integer32	read-write	Slot number of companion channel MMU (XPIC/CCDP). Default value: 0 Near end access: read-write Far end access: read-only (Traffic Node only)
BIT xfMMUChannelModeCapability	1.3.6.1.4.1.193.81.3.4.2.1.1.1.8	Bits	read-only	Channel capability.
MOD xfMMUChannelModulation	1.3.6.1.4.1.193.81.3.4.2.1.4.1.2	ModemModulation	read-only	This object shows the channel modulation. Values: cqpsk(2) CQPSK qam16(3) 16-QAM qam128(4) 128-QAM qam32(5) 32-QAM qam64(6) 64-QAM qam4(7) 4-QAM qam8(8) 8-QAM qam256(9) 256-QAM qam512(10) 512-QAM qam1024(11) 1024-QAM
MMU xfMMUChannelSpacing	1.3.6.1.4.1.193.81.3.4.2.1.4.1.1	MMUChannelSpacingCapability	read-only	Channel spacing. ETSI: 3.5, 7, 14, 28, 40, 56 MHz ANSI: 10, 20, 30, 40, 50 MHz
I32 xfMMUDCNCapacity	1.3.6.1.4.1.193.81.3.4.2.1.4.1.4	Integer32	read-only	DCN Hop Capacity.
INT xfMMUFrameFormatRev	1.3.6.1.4.1.193.81.3.4.2.1.4.1.7	INTEGER	read-only	Frame format revision.
MMU xfMMUFrameFormatType	1.3.6.1.4.1.193.81.3.4.2.1.4.1.6	MMUFrameFormatType	read-only	Frame format type. Values: fftUnknown(0) fftStatic(1) fftAdMod(2) fftXpic(3) fftXpicAdmod(4) fftLegacy(5)
BIT xfMMUInterfaceCapability	1.3.6.1.4.1.193.81.3.4.2.1.1.1.11	Bits	read-only	Interface capability for MMU.
I32 xfMMUMaxCapacity	1.3.6.1.4.1.193.81.3.4.2.1.4.1.5	Integer32	read-only	Max Capacity.
I32 xfMMUMaxTribCapacity	1.3.6.1.4.1.193.81.3.4.2.1.4.1.3	Integer32	read-only	Max tributaries.
MMU xfMMUModCapability	1.3.6.1.4.1.193.81.3.4.2.1.1.1.4	MMUModCapability	read-only	This object shows the modulation capability.
MMU xfMMUModIndexNotValid	1.3.6.1.4.1.193.81.3.4.2.1.1.1.2	MMUModIndexStatus	read-only	This object shows if modulation index is valid. OBSOLETE.
INT xfMMUProtectionPath	1.3.6.1.4.1.193.81.3.4.2.1.1.1.6	INTEGER	read-only	This object indicates what radio path the modem belongs to.
INT xfMMURAUSupplyVoltage	1.3.6.1.4.1.193.81.3.4.2.1.1.1.12	INTEGER	read-only	The radio nominal supply voltage. Values: other(1) p55V(2) default m48V(3) p24V(4)
I32 xfMMUSlotPosition	1.3.6.1.4.1.193.81.3.4.2.1.1.1.7	Integer32	read-only	The AMM slot position in which the MMU2 X is inserted in. 0 = Unknown, 1-20 = slot position.
xfModemCapabilityEntry	1.3.6.1.4.1.193.81.3.4.2.1.4.1		not-accessible	An entry in the xfModemCapabilityTable
xfModemCapabilityTable	1.3.6.1.4.1.193.81.3.4.2.1.4		not-accessible	Table for misc. modem capability information.
xfModemEntry	1.3.6.1.4.1.193.81.3.4.2.1.1.1		not-accessible	An entry in the xfModemTable
xfModemTable	1.3.6.1.4.1.193.81.3.4.2.1.1		not-accessible	Table for Radiolink point-to-points modem managed objects. The tabled is indexed with entPhysicalIndex.
xfRadioLinkPtpModemCompleteGroup	1.3.6.1.4.1.193.81.3.4.2.2.2.1			A collection of all current objects in this MIB module.
xfRadioLinkPtpModemCompliances	1.3.6.1.4.1.193.81.3.4.2.2.1
xfRadioLinkPtpModemConformance	1.3.6.1.4.1.193.81.3.4.2.2
xfRadioLinkPtpModemFullCompliance	1.3.6.1.4.1.193.81.3.4.2.2.1.1			The compliance statement for SNMP entities which implement everything.
xfRadioLinkPtpModemGroups	1.3.6.1.4.1.193.81.3.4.2.2.2
xfRadioLinkPtpModemMIB	1.3.6.1.4.1.193.81.3.4.2			This MIB defines objects for point-to-point Radiolink modems ().
xfRadioLinkPtpModemObjects	1.3.6.1.4.1.193.81.3.4.2.1
BIT xfRAUIFAlarms	1.3.6.1.4.1.193.81.3.4.2.1.2.1.3	Bits	read-only	This object shows rau if related alarms.
xfRAUIFEntry	1.3.6.1.4.1.193.81.3.4.2.1.2.1		not-accessible	An entry in the xfRAUIFTable
INT xfRAUIFLoopEnable	1.3.6.1.4.1.193.81.3.4.2.1.2.1.1	INTEGER	read-write	This object manage the IF loop. Default value: disable(3) Near end access: read-write Far end access: no access
INT xfRAUIFRxLoop	1.3.6.1.4.1.193.81.3.4.2.1.2.1.2	INTEGER	read-write	This object manage the Far end rx loop. Default value: disable(3)
BIT xfRAUIFStatus	1.3.6.1.4.1.193.81.3.4.2.1.2.1.4	Bits	read-only	This object shows test loop status.
xfRAUIFTable	1.3.6.1.4.1.193.81.3.4.2.1.2		not-accessible	Table for rau interface objects. The tabled is indexed with ifIndex.

RFC description

Manages point-to-point radio modem configurations and performance metrics for Ericsson Radiolink equipment.

Start monitoring Ericsson AB Radiolink point-to-point microwave modem (ATPC/protection-path/RAU-alarm status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download XF-RADIOLINK-PTP-MODEM-MIB

What Is XF-RADIOLINK-PTP-MODEM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description