Wellfleet-TELNET-MIB

All MIBs › Wellfleet-TELNET-MIB

Category: Wellfleet BayNetworks System Management

Description: Manages Wellfleet Telnet server configuration, active sessions, and access control parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Wellfleet-TELNET-MIB?

Wellfleet-TELNET-MIB is a Wellfleet/Bay Networks vendor MIB for managing the router's Telnet server used for remote command-line access. It exposes Telnet server configuration, a table of active Telnet sessions, and access control parameters governing who may connect. As a software status MIB it lets an administrator confirm the Telnet service is enabled and see how many sessions are currently active, which is useful both for security auditing and for diagnosing why an admin cannot get a CLI session (e.g., session limit reached). It is a self-contained vendor extension that complements the base Wellfleet system MIB rather than depending on IETF standards. It is deployed on Wellfleet/Bay Networks routers wherever Telnet remains an active management access method, and administrators can download the Wellfleet-TELNET-MIB file to load it into their MIB browser for session monitoring.

IPNetwork Monitor allows you to monitor SNMP objects defined in Wellfleet-TELNET-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Wellfleet/Bay Networks router

Monitoring Examples

An administrator would poll the active Telnet session table to see how many CLI sessions are currently open and from which source addresses, and check access control objects to confirm the expected restrictions are in place. If the session table is at its maximum and a legitimate admin cannot connect, this MIB would reveal that a stale or unauthorized session is holding a slot. No sample object names were provided for this MIB, so this example is inferred from the stated short description.

What Can Be Monitored

Telnet server status
active Telnet sessions
access control configuration

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
Gauge

From RFC1213-MIB

DisplayString

From Wellfleet-COMMON-MIB

wfTelnetGroup

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wfTelnet	1.3.6.1.4.1.18.3.5.3.7.1
INT wfTelnetDelete	1.3.6.1.4.1.18.3.5.3.7.1.1	INTEGER	read-write	Create/Delete parameter. Default is created. Users perform a set operation on this object in order to create/delete TELNET.
INT wfTelnetDisable	1.3.6.1.4.1.18.3.5.3.7.1.2	INTEGER	read-write	Enables or Disables TELNET Subsystem
INT wfTelnetLinesPerScreen	1.3.6.1.4.1.18.3.5.3.7.1.3	INTEGER	read-write	Number of lines which can be displayed in one screen on the Telnet Technician Interface console. (Default value if NAWS option not negotiated)
INT wfTelnetMoreDisable	1.3.6.1.4.1.18.3.5.3.7.1.4	INTEGER	read-write	Enable the 'more' feature on the Telnet Technician Interface console
STR wfTelnetPrompt	1.3.6.1.4.1.18.3.5.3.7.1.5	DisplayString	read-write	Character string which will be used as the system prompt on the Telnet Technician Interface console
INT wfTelnetLoginTimeOut	1.3.6.1.4.1.18.3.5.3.7.1.6	INTEGER	read-write	Time out in minutes to Disconnect when at the login prompt
INT wfTelnetPasswordTimeOut	1.3.6.1.4.1.18.3.5.3.7.1.7	INTEGER	read-write	Timout in minutes on Password entry
INT wfTelnetCommandTimeOut	1.3.6.1.4.1.18.3.5.3.7.1.8	INTEGER	read-write	Time out in minutes to Disconnect when at the command prompt
INT wfTelnetLoginRetries	1.3.6.1.4.1.18.3.5.3.7.1.9	INTEGER	read-write	Limit # of login attempts then Disconnect
CTR wfTelnetTotalLogins	1.3.6.1.4.1.18.3.5.3.7.1.10	Counter	read-only	Total number of Telnet TI login attempts
CTR wfTelnetUserLoginErrors	1.3.6.1.4.1.18.3.5.3.7.1.11	Counter	read-only	Total number of FAILED User login attempts
CTR wfTelnetManagerLoginErrors	1.3.6.1.4.1.18.3.5.3.7.1.12	Counter	read-only	Total number of FAILED Manager login attempts
CTR wfTelnetOtherLoginErrors	1.3.6.1.4.1.18.3.5.3.7.1.13	Counter	read-only	Total number of FAILED Other login attempts
GAU wfTelnetActiveSessions	1.3.6.1.4.1.18.3.5.3.7.1.14	Gauge	read-only	Total number of Telnet TI Sessions
INT wfTelnetDiagnosticReport	1.3.6.1.4.1.18.3.5.3.7.1.15	INTEGER	read-write	Diagnostic Flag: report prints the options information, plus some additional information about what processing is going on
INT wfTelnetDiagnosticExercise	1.3.6.1.4.1.18.3.5.3.7.1.16	INTEGER	read-write	Diagnostic Flag: Not implemented yet.
INT wfTelnetDiagnosticNetworkData	1.3.6.1.4.1.18.3.5.3.7.1.17	INTEGER	read-write	Diagnostic Flag: NETDATA displays the data stream received by telnetd
INT wfTelnetDiagnosticPtyData	1.3.6.1.4.1.18.3.5.3.7.1.18	INTEGER	read-write	Diagnostic Flag: PTYDATA displays data written to the pty
INT wfTelnetDiagnosticOptions	1.3.6.1.4.1.18.3.5.3.7.1.19	INTEGER	read-write	Diagnostic Flag: OPTIONS prints information about the negotiation of TELNET options
STR wfTelnetInitialSearchPath	1.3.6.1.4.1.18.3.5.3.7.1.20	DisplayString	read-write	Example: 'A:;1:;2:' or '2:;4:6:;9:
STR wfTelnetManagerAutoScript	1.3.6.1.4.1.18.3.5.3.7.1.21	DisplayString	read-write	for each login.
STR wfTelnetUserAutoScript	1.3.6.1.4.1.18.3.5.3.7.1.22	DisplayString	read-write	for each login.
INT wfTelnetUserAbortLogoutDisable	1.3.6.1.4.1.18.3.5.3.7.1.23	INTEGER	read-write	a USER from escaping out of the User Autoscript
INT wfTelnetHistoryDepth	1.3.6.1.4.1.18.3.5.3.7.1.24	INTEGER	read-write	TI command history table size
INT wfTelnetReverseEnable	1.3.6.1.4.1.18.3.5.3.7.1.25	INTEGER	read-write	Reverse Telnet enabled
INT wfTelnetReversePort	1.3.6.1.4.1.18.3.5.3.7.1.26	INTEGER	read-write	Console port to use for reverse telnet

RFC description

Manages TELNET protocol configuration and console access for Wellfleet systems.

Start monitoring Wellfleet/Bay Networks router (Telnet server enable/active-session status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Wellfleet-TELNET-MIB

What Is Wellfleet-TELNET-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description