Wellfleet-RREDUND-MIB

All MIBs › Wellfleet-RREDUND-MIB

Category: Wellfleet BayNetworks System Management

Description: Manages Wellfleet router redundancy parameters, standby router states, and failover event statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Wellfleet-RREDUND-MIB?

Wellfleet-RREDUND-MIB is a Wellfleet (a Bay Networks/Nortel predecessor) proprietary enterprise MIB for managing router redundancy, defining standby router state and failover event statistics. It covers redundancy configuration such as primary/standby role assignment, the current state of redundant router pairs, and counters for failover events. It is strongly hardware/software status oriented: it reports which router in a redundant pair is currently active versus standby and tracks how many failover events have occurred, both critical for detecting an unplanned router failure or a flapping redundancy protocol. It predates and is conceptually similar to later standardized redundancy protocols such as VRRP/HSRP, but is entirely proprietary to Wellfleet's own router software with no formal standards dependency. It was deployed on legacy Wellfleet/Bay Networks routers configured in pairs for high-availability WAN/LAN routing in the 1990s. Engineers can download the Wellfleet-RREDUND-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Wellfleet-RREDUND-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Wellfleet/Bay Networks router (redundant pair)

Monitoring Examples

No sample object names were supplied for this MIB; based on its description it would be expected to expose a current active/standby role object and a failover-event counter for each redundant router pair. An admin would poll the role object to confirm which unit is currently active, and watch the failover counter for an unexpected increase indicating the standby router took over due to a primary failure. Because no concrete object names are available, this scenario is described generically rather than tied to actual MIB identifiers.

What Can Be Monitored

active/standby router role
failover event count
redundancy state

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress

From RFC1213-MIB

DisplayString

From Wellfleet-COMMON-MIB

wfRRedGroup

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT wfRRedundAtmDeathTimer	1.3.6.1.4.1.18.3.5.17.1.34	INTEGER	read-write	Time (in milliseconds) we want to wait for the ATM driver gate to come back up, before we role-switch.
INT wfRRedundAuto	1.3.6.1.4.1.18.3.5.17.1.11	INTEGER	read-write	Auto Role Switching parameter - Options for Auto Role Switching.
INT wfRRedundBidDuration	1.3.6.1.4.1.18.3.5.17.1.16	INTEGER	read-write	the Bidding Period
INT wfRRedundBSecGoodIFCount	1.3.6.1.4.1.18.3.5.17.1.29	INTEGER	read-only	Best Secondary Member's Good Interface Count, a 32 bit unsigned value.
INT wfRRedundBSecGoodRESCount	1.3.6.1.4.1.18.3.5.17.1.30	INTEGER	read-only	Best Secondary Member's Good Resource Count, a 32 bit unsigned value.
INT wfRRedundBSecMemberID	1.3.6.1.4.1.18.3.5.17.1.26	INTEGER	read-only	Best Secondary Member's Member ID
INT wfRRedundBSecRefNum	1.3.6.1.4.1.18.3.5.17.1.28	INTEGER	read-only	Best Secondary Member's Reference Number, a 32 bit unsigned value.
INT wfRRedundBSecState	1.3.6.1.4.1.18.3.5.17.1.27	INTEGER	read-only	Best Secondary Member's State
INT wfRRedundCctCct	1.3.6.1.4.1.18.3.5.17.2.1.3	INTEGER	read-only	Circuit Number, used as Instance ID.
INT wfRRedundCctDelete	1.3.6.1.4.1.18.3.5.17.2.1.1	INTEGER	read-write	Create/Delete parameter
INT wfRRedundCctDisable	1.3.6.1.4.1.18.3.5.17.2.1.2	INTEGER	read-write	Enable/Disable parameter
wfRRedundCctEntry	1.3.6.1.4.1.18.3.5.17.2.1		not-accessible	Entry summary.
INT wfRRedundCctMonitor	1.3.6.1.4.1.18.3.5.17.2.1.5	INTEGER	read-write	To indicate what element of the interface is being monitored for role switching, the circuit or the link.
OCT wfRRedundCctPrimaryMACAddr	1.3.6.1.4.1.18.3.5.17.2.1.4	OCTET STRING	read-write	This attribute is used for Site Manager Router Redundancy Configuration.
INT wfRRedundCctRSwitchOnFailure	1.3.6.1.4.1.18.3.5.17.2.1.6	INTEGER	read-write	For select triggering of role switching when interface fails ona per CCT basis.
INT wfRRedundCctSendPduDisable	1.3.6.1.4.1.18.3.5.17.2.1.7	INTEGER	read-write	For enabling/disabling sending of Router Redundancy PDU per CCT basis.
INT wfRRedundCctSONMPRcvCount	1.3.6.1.4.1.18.3.5.17.2.1.10	INTEGER	read-only	Used for counting good SONMP PDU received on this circuit.
INT wfRRedundCctSONMPRcvErrorCount	1.3.6.1.4.1.18.3.5.17.2.1.11	INTEGER	read-only	Used for counting bad SONMP PDU received on this circuit.
INT wfRRedundCctSONMPXmtCount	1.3.6.1.4.1.18.3.5.17.2.1.9	INTEGER	read-only	Used for counting SONMP PDU transmitted on this circuit.
INT wfRRedundCctStatus	1.3.6.1.4.1.18.3.5.17.2.1.8	INTEGER	read-only	Status of the interface from Router Redundancy prospective.
wfRRedundCctTable	1.3.6.1.4.1.18.3.5.17.2		not-accessible	This tabulates the circuit specific Router Redundancy parameters.
INT wfRRedundDelete	1.3.6.1.4.1.18.3.5.17.1.1	INTEGER	read-write	Create/Delete parameter
INT wfRRedundDisable	1.3.6.1.4.1.18.3.5.17.1.2	INTEGER	read-write	Enable/Disable parameter
INT wfRRedundGoodBidCount	1.3.6.1.4.1.18.3.5.17.1.12	INTEGER	read-write	same router prior to kicking in Auto Role Switching.
INT wfRRedundGoodIFCount	1.3.6.1.4.1.18.3.5.17.1.8	INTEGER	read-only	Good Interface Count parameter, a 32 bit unsigned number.
INT wfRRedundGoodRESCount	1.3.6.1.4.1.18.3.5.17.1.9	INTEGER	read-only	Good Resource Count parameter, a 32 bit unsigned number.
wfRRedundGroup	1.3.6.1.4.1.18.3.5.17.1
INT wfRRedundGroupId	1.3.6.1.4.1.18.3.5.17.1.4	INTEGER	read-write	Group ID parameter
INT wfRRedundHelloTimer	1.3.6.1.4.1.18.3.5.17.1.15	INTEGER	read-write	Secondary Keep Alives
INT wfRRedundMemberId	1.3.6.1.4.1.18.3.5.17.1.5	INTEGER	read-write	Member ID parameter
CTR wfRRedundNPrimaryCounters	1.3.6.1.4.1.18.3.5.17.1.18	Counter	read-only	any design flaws.
STR wfRRedundPriConfigFilePath	1.3.6.1.4.1.18.3.5.17.1.20	DisplayString	read-write	Pathname of Primary's configuration file.
INT wfRRedundPriGoodIFCount	1.3.6.1.4.1.18.3.5.17.1.24	INTEGER	read-only	Primary Member's Good Interface Count, a 32 bit unsigned value.
INT wfRRedundPriGoodRESCount	1.3.6.1.4.1.18.3.5.17.1.25	INTEGER	read-only	Primary Member's Good Resource Count, a 32 bit unsigned value.
INT wfRRedundPriMemberID	1.3.6.1.4.1.18.3.5.17.1.21	INTEGER	read-only	Primary Member's Member ID
INT wfRRedundPriority	1.3.6.1.4.1.18.3.5.17.1.14	INTEGER	read-write	Priority parameter - Priority level to be the Primary router
INT wfRRedundPriRefNum	1.3.6.1.4.1.18.3.5.17.1.23	INTEGER	read-only	Primary Member's Reference Number, a 32 bit unsigned value.
INT wfRRedundPriState	1.3.6.1.4.1.18.3.5.17.1.22	INTEGER	read-only	Primary Member's State
INT wfRRedundRefNum	1.3.6.1.4.1.18.3.5.17.1.7	INTEGER	read-only	Reference Number parameter, a 32 bit unsigned number.
INT wfRRedundRemoteMemberDelete	1.3.6.1.4.1.18.3.5.17.4.1.1	INTEGER	read-write	Create/Delete parameter
wfRRedundRemoteMemberEntry	1.3.6.1.4.1.18.3.5.17.4.1		not-accessible	Entry summary.
INT wfRRedundRemoteMemberGoodIfCnt	1.3.6.1.4.1.18.3.5.17.4.1.9	INTEGER	read-only	Good interfaces count, a 32 bit unsigned value.
INT wfRRedundRemoteMemberGoodResCnt	1.3.6.1.4.1.18.3.5.17.4.1.10	INTEGER	read-only	Good resources count, a 32 bit unsigned value.
INT wfRRedundRemoteMemberGroupId	1.3.6.1.4.1.18.3.5.17.4.1.2	INTEGER	read-only	Group Member ID parameter
INT wfRRedundRemoteMemberId	1.3.6.1.4.1.18.3.5.17.4.1.3	INTEGER	read-only	Member ID parameter
INT wfRRedundRemoteMemberIfCnt	1.3.6.1.4.1.18.3.5.17.4.1.11	INTEGER	read-only	Interface count
INT wfRRedundRemoteMemberLocalIfReachCnt	1.3.6.1.4.1.18.3.5.17.4.1.12	INTEGER	read-only	Local Interface reachable count
IP wfRRedundRemoteMemberNetAddr	1.3.6.1.4.1.18.3.5.17.4.1.4	IpAddress	read-only	Member Net Address
INT wfRRedundRemoteMemberPriority	1.3.6.1.4.1.18.3.5.17.4.1.8	INTEGER	read-only	Priority parameter - Priority level to be the Primary router
INT wfRRedundRemoteMemberRefNum	1.3.6.1.4.1.18.3.5.17.4.1.7	INTEGER	read-only	Reference Number parameter, a 32 bit unsigned value.
INT wfRRedundRemoteMemberRole	1.3.6.1.4.1.18.3.5.17.4.1.5	INTEGER	read-only	Role parameter
INT wfRRedundRemoteMemberState	1.3.6.1.4.1.18.3.5.17.4.1.6	INTEGER	read-only	State parameter
wfRRedundRemoteMemberTable	1.3.6.1.4.1.18.3.5.17.4		not-accessible	This tabulates the remote members for Router Redundancy.
INT wfRRedundResourceCircuitNumber	1.3.6.1.4.1.18.3.5.17.3.1.3	INTEGER	read-only	Circuit owner of this interface.
INT wfRRedundResourceDelete	1.3.6.1.4.1.18.3.5.17.3.1.1	INTEGER	read-write	Create/Delete parameter
INT wfRRedundResourceDisable	1.3.6.1.4.1.18.3.5.17.3.1.2	INTEGER	read-write	Enable/Disable parameter
wfRRedundResourceEntry	1.3.6.1.4.1.18.3.5.17.3.1		not-accessible	Entry summary.
IP wfRRedundResourceNetAddr	1.3.6.1.4.1.18.3.5.17.3.1.4	IpAddress	read-only	Resource's Network Address, i.e. IP Address.
INT wfRRedundResourcePingIntervalTimer	1.3.6.1.4.1.18.3.5.17.3.1.7	INTEGER	read-write	Frequency timer for Pings in sec
INT wfRRedundResourcePingRetryCount	1.3.6.1.4.1.18.3.5.17.3.1.8	INTEGER	read-write	Number of missed Pings before Resouce is unreachable
INT wfRRedundResourcePingTimeOut	1.3.6.1.4.1.18.3.5.17.3.1.9	INTEGER	read-write	Ping TimeOut in sec (wait this long before increment retry)
INT wfRRedundResourceStatus	1.3.6.1.4.1.18.3.5.17.3.1.5	INTEGER	read-only	Resource Status.
INT wfRRedundResourceStatusUpdateDisable	1.3.6.1.4.1.18.3.5.17.3.1.6	INTEGER	read-write	Resource Status Update Enable.
wfRRedundResourceTable	1.3.6.1.4.1.18.3.5.17.3		not-accessible	for Router Redundancy.
INT wfRRedundRole	1.3.6.1.4.1.18.3.5.17.1.6	INTEGER	read-write	Role parameter
INT wfRRedundRoleSwitchDelayTimer	1.3.6.1.4.1.18.3.5.17.1.19	INTEGER	read-write	message to adjacent routers on the non-backed-up interfaces.
INT wfRRedundSlot	1.3.6.1.4.1.18.3.5.17.1.32	INTEGER	read-only	The rredund gate's local Slot ID
GAU wfRRedundSlotMask	1.3.6.1.4.1.18.3.5.17.1.33	Gauge	read-write	Slot mask for which slots RREDUND is eligible to run on. The MSBit represents slot 1, the next most significant bit represents slot 2, and so on... Slots can be 1-14. Default is all slots on a BCN.
INT wfRRedundState	1.3.6.1.4.1.18.3.5.17.1.3	INTEGER	read-only	State parameter
INT wfRRedundSwitch	1.3.6.1.4.1.18.3.5.17.1.10	INTEGER	read-write	Router software clears to indicate receive of role switch command
INT wfRRedundTimeoutCounters	1.3.6.1.4.1.18.3.5.17.1.17	INTEGER	read-write	receiving Primary Hellos before Secondaries enter the bidding process.
INT wfRRedundVersion	1.3.6.1.4.1.18.3.5.17.1.13	INTEGER	read-only	Version parameter - Redundancy Protocol Version Number
INT wfRRedundWarmBoot	1.3.6.1.4.1.18.3.5.17.1.31	INTEGER	read-write	Flag to indiacte mode of role switch. enabled is Warm-reboot vs. disabled is hot-non-reboot

RFC description

Wellfleet router redundancy configuration and state management for failover and high-availability clustering.

Start monitoring Wellfleet/Bay Networks router, redundant pair (active/standby role and failover-event status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Wellfleet-RREDUND-MIB

What Is Wellfleet-RREDUND-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description