Wellfleet-PROTOPRI-MIB

All MIBs › Wellfleet-PROTOPRI-MIB

Category: DiffServ and QoS, Wellfleet BayNetworks System Management

Description: Manages Wellfleet protocol priority queuing assignments and per-protocol bandwidth allocation parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Wellfleet-PROTOPRI-MIB?

Wellfleet-PROTOPRI-MIB is a Wellfleet (Bay Networks/Nortel-era) router MIB that manages protocol priority queuing, letting an administrator assign transmission priority and bandwidth allocation per network protocol on a router interface. It exposes configuration objects for the priority/bandwidth assignments and operational objects reflecting queue behavior and traffic distribution across those priority classes. From a monitoring standpoint it is mainly useful for checking the software configuration status of QoS-like traffic shaping and for spotting queue congestion or an unfairly starved protocol class rather than physical hardware faults. It is a vendor extension that sits on top of Wellfleet's base interface/routing MIBs rather than depending on an external standards-track MIB. It is deployed on Wellfleet multiprotocol routers carrying mixed traffic types where certain protocols (e.g., SNA, voice) need guaranteed bandwidth over others. Engineers can download the Wellfleet-PROTOPRI-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Wellfleet-PROTOPRI-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Wellfleet/Bay Networks multiprotocol router

Monitoring Examples

No sample object names were provided; in general an operator would poll the per-protocol priority/bandwidth assignment objects to confirm the intended queuing policy is applied and check per-queue traffic counters to detect a lower-priority protocol crowding out a higher-priority one.

What Can Be Monitored

per-protocol priority assignment
per-protocol bandwidth allocation
queue traffic distribution
queue congestion indicators

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
Opaque
TimeTicks
enterprises
mgmt

From RFC1213-MIB

DisplayString
mib-2

From Wellfleet-COMMON-MIB

wfProtocolPriorityGroup

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wfProtoPriQTable	1.3.6.1.4.1.18.3.5.1.9.1		not-accessible	Protocol Priority Queue Mib
wfProtoPriQEntry	1.3.6.1.4.1.18.3.5.1.9.1.1		not-accessible	entry for each queue the Protocol Priority supports
INT wfProtoPriQueueDelete	1.3.6.1.4.1.18.3.5.1.9.1.1.1	INTEGER	read-write	Create/Delete this Mib entry
INT wfProtoPriClientId	1.3.6.1.4.1.18.3.5.1.9.1.1.2	INTEGER	read-only	Client's number provided by the Client to identify the user
INT wfProtoPriQueueNumber	1.3.6.1.4.1.18.3.5.1.9.1.1.3	INTEGER	read-only	Queue number
INT wfProtoPriQueueBandwidthPercent	1.3.6.1.4.1.18.3.5.1.9.1.1.4	INTEGER	read-write	Bandwidth percent alloted for this queue; Sum of the bandwidth for all the queues for this peer should equal to 100%
GAU wfProtoPriQueueHighWaterPkts	1.3.6.1.4.1.18.3.5.1.9.1.1.5	Gauge	read-only	Max number of packets held by this Queue since the Queue creation or reset
CTR wfProtoPriQueueTxPkts	1.3.6.1.4.1.18.3.5.1.9.1.1.6	Counter	read-only	Max number number of packets sent out of this Queue(statistics) since creation or last reset
CTR wfProtoPriQueueTotalTxOctets	1.3.6.1.4.1.18.3.5.1.9.1.1.7	Counter	read-only	Max number of bytes sent out of this Queue(statistics) since creation or last reset
CTR wfProtoPriQueueLargePkts	1.3.6.1.4.1.18.3.5.1.9.1.1.8	Counter	read-only	Number of packets that exceeded the latency by itself but still got sent out; N/A for DLS
CTR wfProtoPriQueueClippedPkts	1.3.6.1.4.1.18.3.5.1.9.1.1.9	Counter	read-only	Number of packets clipped when Congestion control is disabled
IP wfProtoPriPeerAddr	1.3.6.1.4.1.18.3.5.1.9.1.1.10	IpAddress	read-only	IP addr for DLS, part of the instance id
GAU wfProtoPriQueueHighWaterBytes	1.3.6.1.4.1.18.3.5.1.9.1.1.11	Gauge	read-only	Max number of bytes held by this Queue since the Queue creation or reset
CTR wfProtoPriCCPkts	1.3.6.1.4.1.18.3.5.1.9.1.1.12	Counter	read-only	Max number of packets sent by Congestion Control Queue in memory(statistics) since creation or last reset
CTR wfProtoPriCCOctets	1.3.6.1.4.1.18.3.5.1.9.1.1.13	Counter	read-only	Max number of bytes sent by Congestion Control Queue in memory(statistics) since creation or last reset
GAU wfProtoPriCCHighWaterPkts	1.3.6.1.4.1.18.3.5.1.9.1.1.14	Gauge	read-only	Max number of packets held by Congestion Control Queue in memory(statistics) since creation or last reset
GAU wfProtoPriCCHighWaterBytes	1.3.6.1.4.1.18.3.5.1.9.1.1.15	Gauge	read-only	Max number of bytes held by Congestion Control Queue in memory(statistics) since creation or last reset
wfProtoPriFilterTable	1.3.6.1.4.1.18.3.5.1.9.2		not-accessible	Protocol Prioritiy Filter Definitions
wfProtoPriFilterEntry	1.3.6.1.4.1.18.3.5.1.9.2.1		not-accessible	Filter table entry for Protocol Priority
INT wfProtoPriFilterCreate	1.3.6.1.4.1.18.3.5.1.9.2.1.1	INTEGER	read-write	create/delete the filter table
INT wfProtoPriFilterEnable	1.3.6.1.4.1.18.3.5.1.9.2.1.2	INTEGER	read-write	Defines whether or not the traffic filter rule should be used: enabled - activate the rule. disabled - inactivate the rule.
INT wfProtoPriFilterState	1.3.6.1.4.1.18.3.5.1.9.2.1.3	INTEGER	read-only	Defines the current State of the traffic filter: inactive - the rule is not in use. active - the rule is being used. error - the application detected an error in the rule.
CTR wfProtoPriFilterCounter	1.3.6.1.4.1.18.3.5.1.9.2.1.4	Counter	read-only	counter to keep track how many times this rule got hit
OCT wfProtoPriFilterDefinition	1.3.6.1.4.1.18.3.5.1.9.2.1.5	OCTET STRING	read-write	octect string defining the filter rule
INT wfProtoPriFilterReserved	1.3.6.1.4.1.18.3.5.1.9.2.1.6	INTEGER	read-only	reserved
IP wfProtoPriFilterPeerAddr	1.3.6.1.4.1.18.3.5.1.9.2.1.7	IpAddress	read-only	for DLS part of instance id
INT wfProtoPriFilterClientId	1.3.6.1.4.1.18.3.5.1.9.2.1.8	INTEGER	read-only	unique id for each Client provided by the Client
INT wfProtoPriFilterRuleNumber	1.3.6.1.4.1.18.3.5.1.9.2.1.9	INTEGER	read-only	rule number
INT wfProtoPriFilterFragment	1.3.6.1.4.1.18.3.5.1.9.2.1.10	INTEGER	read-only	fragment number
STR wfProtoPriFilterName	1.3.6.1.4.1.18.3.5.1.9.2.1.11	DisplayString	read-write	name of this rule, provided by the user

RFC description

A Wellfleet vendor-specific MIB for managing protocol priority configurations. This MIB defines management objects for setting and monitoring protocol-based traffic priorities and QoS parameters on Wellfleet networking devices.

Start monitoring Wellfleet/Bay Networks multiprotocol router (per-protocol priority/bandwidth-allocation config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Wellfleet-PROTOPRI-MIB

What Is Wellfleet-PROTOPRI-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description