Wellfleet-WFMPS-MIB

All MIBs › Wellfleet-WFMPS-MIB

Category: Wellfleet BayNetworks System Management

Description: Monitors Wellfleet multiprotocol server module status, resource utilization, and forwarding statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is Wellfleet-WFMPS-MIB?

The Wellfleet-WFMPS-MIB is Wellfleet's proprietary MIB for its Multiprotocol Server (MPS) module, a router line card handling multiprotocol packet forwarding. It exposes module operational status, resource utilization figures, and forwarding statistics for the MPS hardware. Its monitoring value directly supports hardware/software module health checks: confirming the module's operational status, watching its resource or CPU-like utilization for overload, and reviewing forwarding statistics for errors or drops that would indicate a struggling or failing module. No dependency on other standard MIBs is apparent, as it is proprietary to Wellfleet's own enterprise tree. It was used by operators managing Wellfleet multiprotocol routers with MPS line cards in backbone or aggregation roles. Engineers can download the Wellfleet-WFMPS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in Wellfleet-WFMPS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Wellfleet router with Multiprotocol Server (MPS) module
Bay Networks/Nortel router

Monitoring Examples

No specific object or table names were extracted for this module. Conceptually, an operator would poll the module's operational status object to confirm the MPS card is up, watch its resource/utilization figures for sustained high load, and review forwarding statistics counters for a rising error or drop rate that would indicate the module is overloaded or degrading.

What Can Be Monitored

MPS module operational status
module resource/CPU utilization
packet forwarding statistics
forwarding errors/drops

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
TimeTicks

From RFC1213-MIB

DisplayString

From Wellfleet-COMMON-MIB

wfmpsObjects

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wfmpsEntryTable	1.3.6.1.4.1.18.3.5.9.10.1		not-accessible	MPS base entry table.
wfmpsEntry	1.3.6.1.4.1.18.3.5.9.10.1.1		not-accessible	An MPS base entry description
INT wfmpsDelete	1.3.6.1.4.1.18.3.5.9.10.1.1.1	INTEGER	read-write	Indication to create or delete an MPS base Entry from the MIB
INT wfmpsDisable	1.3.6.1.4.1.18.3.5.9.10.1.1.2	INTEGER	read-write	Enables or Disables MPS Subsystem.
INT wfmpsSlot	1.3.6.1.4.1.18.3.5.9.10.1.1.3	INTEGER	read-only	The Slot number of the slot on which this MPS is instantiated.
INT wfmpsCct	1.3.6.1.4.1.18.3.5.9.10.1.1.4	INTEGER	read-write	This corresponds to the circuit number associated with the ATM Driver
INT wfmpsCacheIpOverRide	1.3.6.1.4.1.18.3.5.9.10.1.1.5	INTEGER	read-write	Indicates whether the wfmps defined MPS Egress Cache reverification timer over rides the timer defined by the wfIpInterfaceHostCache.i If on, overide and use the timer defined by wfmpsCacheReverifyTimer if off, use the timer defined by wfIpInterfaceHostCache.
INT wfmpsCacheReverifyTimer	1.3.6.1.4.1.18.3.5.9.10.1.1.6	INTEGER	read-write	A range of values to specify the timer value for MPS Egress Cache reverification. This value is of significance, only when wfmpsCacheIpOverRide is turned on.
INT wfmpsAddrGenerateMode	1.3.6.1.4.1.18.3.5.9.10.1.1.7	INTEGER	read-write	Indicates whether this MPS's address should be generated automatically or manually.
wfmpsConfigTable	1.3.6.1.4.1.18.3.5.9.10.2		not-accessible	The MPOA Server Configuration Table. This table represents the configuration information for all MPOA Servers which this agent manages.
wfmpsConfigEntry	1.3.6.1.4.1.18.3.5.9.10.2.1		not-accessible	MPOA Server Configuration Entry. Each entry contains configuration information for one MPOA Server Control.
INT wfmpsCnfDelete	1.3.6.1.4.1.18.3.5.9.10.2.1.1	INTEGER	read-write	Indication to create or delete an MPS Config Entry from the MIB
INT wfmpsRowStatus	1.3.6.1.4.1.18.3.5.9.10.2.1.2	INTEGER	read-write	This object allows creation and deletion of MPOA Servers. Within each conceptual wfmpsConfigTable row, objects which are writable may be modified regardless of the value of wfmpsRowStatus. It is not necessary to set a row's status to 'notInService' first. A row cannot be created, unless the wfmpsAtmCtrlAddress in this table is unique. When an MPOA Server is created via this object, it will initially have 'wfmpsOperStatus' = 'initialState'
INT wfmpsCnfIndex	1.3.6.1.4.1.18.3.5.9.10.2.1.3	INTEGER	read-only	A value which uniquely identifies this conceptual row in the wfmpsConfigTable. The 'wfmpsNextIndex' object needs to be used to determine the value of this object. A row cannot be added, unless wfmpsCtrlAtmAddr is unique. In the event of an MPS re-initialization, the value of this wfmpsIndex must remain the same. However, in the event of an agent re-initialization, this value does not need to be preserved.
INT wfmpsConfigMode	1.3.6.1.4.1.18.3.5.9.10.2.1.4	INTEGER	read-write	Indicates whether this MPS should auto-configure the next time it is (re-)initialized. In automatic(1) mode the LECS is contacted and requests are made for the MPS-p* parameters as indicated by wfmpsConfigMask. In manual(2) mode, the values of the configuration parameters are obtained from the wfmpsConfigTable and the wfmpsProtocolTable.
OCT wfmpsCtrlAtmAddr	1.3.6.1.4.1.18.3.5.9.10.2.1.5	OCTET STRING	read-write	The MPS's Control ATM Address. There exists one Control ATM Address per MPS, therefore, the value of this entry is unique within the table.
INT wfmpsKeepAliveTime	1.3.6.1.4.1.18.3.5.9.10.2.1.6	INTEGER	read-write	MPS-p1 Keep-alive time is max interval between the MPS sending MPOA Keep-Alives in seconds.
INT wfmpsKeepAliveLifeTime	1.3.6.1.4.1.18.3.5.9.10.2.1.7	INTEGER	read-write	MPS-p2 Keep-Alive Lifetime The length of time an MPC may consider a Keep-Alive valid in seconds. This value must be at least three times the wfmpsKeepAliveTime (MPS-p1).
INT wfmpsInitialRetryTime	1.3.6.1.4.1.18.3.5.9.10.2.1.8	INTEGER	read-write	MPS-p4 is initial value in seconds for the MPOA retry mechanism.
INT wfmpsRetryTimeMaximum	1.3.6.1.4.1.18.3.5.9.10.2.1.9	INTEGER	read-write	MPS-p5 cumulative max value in seconds for Retry Time (MPS-p4).
INT wfmpsGiveupTime	1.3.6.1.4.1.18.3.5.9.10.2.1.10	INTEGER	read-write	MPS-p6 Give Up Time. Minimum time in seconds to wait before giving up on a pending resolution request.
INT wfmpsDefaultHoldingTime	1.3.6.1.4.1.18.3.5.9.10.2.1.11	INTEGER	read-write	MPS-p7 Default Holding Time in minutes. The default Holding Time used in NHRP Resolution Replies. An egress MPS may use local information to determine a more appropriate Holding Time.
INT wfmpsCnfSlot	1.3.6.1.4.1.18.3.5.9.10.2.1.12	INTEGER	read-only	The Slot number of the slot on which this MPS is instantiated.
INT wfmpsInitialCacheSize	1.3.6.1.4.1.18.3.5.9.10.2.1.13	INTEGER	read-write	Indicates the amount of memory to allocate initially to accomadate the cache entries.
INT wfmpsMaxCacheSize	1.3.6.1.4.1.18.3.5.9.10.2.1.14	INTEGER	read-write	Maximum number of Ingress/Egress cache entries allowed
OCT wfmpsLECSAddress	1.3.6.1.4.1.18.3.5.9.10.2.1.15	OCTET STRING	read-write	The LE Config Server Address to be used. If left(or set) to NULL_VAL the well-known LECS ATM address will be used.
INT wfmpsDebugMsgLevel	1.3.6.1.4.1.18.3.5.9.10.2.1.16	INTEGER	read-write	Debug Levels - This attribute is used to assign the level of DEBUG message to be logged for each MPS.
STR wfmpsConfigMpsName	1.3.6.1.4.1.18.3.5.9.10.2.1.17	DisplayString	read-write	User name for the MPS
wfmpsActualTable	1.3.6.1.4.1.18.3.5.9.10.3		not-accessible	A read-only table containing identification, status, and operational information about the MPOA Servers this agent manages.
wfmpsActualEntry	1.3.6.1.4.1.18.3.5.9.10.3.1		not-accessible	An entry in the MPS Actual Table. An entry represents a specific MPOA Server's status and operation information.
INT wfmpsActIndex	1.3.6.1.4.1.18.3.5.9.10.3.1.1	INTEGER	read-only	This is the mps index
INT wfmpsActualState	1.3.6.1.4.1.18.3.5.9.10.3.1.2	INTEGER	read-only	This object indicates the current operational status of the MPOA Server.
TIK wfmpsDiscontinuityTime	1.3.6.1.4.1.18.3.5.9.10.3.1.3	TimeTicks	read-only	The value of sysUpTime on the most recent occasion at which any one or more of this MPS's counters experienced a discontinuity. The relevant counters are the specific instances associated with this MPS. If discontinuities have not occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.
INT wfmpsActualConfigMode	1.3.6.1.4.1.18.3.5.9.10.3.1.4	INTEGER	read-only	Indicates whether this MPS auto-configured when it started was last (re-)initialized. In automatic(1) mode the LECS was contacted and all the MPS-p* parameters were downloaded. In manual(2) mode, either the LECS could not be contacted (if wfmpsConfigMode is automatic) or local over rides are being used (wfmpsConfigMode is manual). if wfmpsConfigMode is automatic and wfmpsActualConfigMode is manual, then the initial values are the MIB defaults. As always, any values can be set, however, if wfmpsConfigMode is automatic, those changes will be lost on the next restart.
INT wfmpsActualKeepAlive	1.3.6.1.4.1.18.3.5.9.10.3.1.5	INTEGER	read-only	The maximum amount of time in seconds this MPS waits between sending MPOA Keep-Alives.
INT wfmpsActualKeepAliveLifeTime	1.3.6.1.4.1.18.3.5.9.10.3.1.6	INTEGER	read-only	The length of time in seconds this MPS considers a Keep-Alive valid.
INT wfmpsActualInitialRetryTime	1.3.6.1.4.1.18.3.5.9.10.3.1.7	INTEGER	read-only	The actual initial value in seconds for the MPOA retry mechanism.
INT wfmpsActualRetryTimeMaximum	1.3.6.1.4.1.18.3.5.9.10.3.1.8	INTEGER	read-only	The actual cumulative max value in seconds for Retry Time.
INT wfmpsActualGiveupTime	1.3.6.1.4.1.18.3.5.9.10.3.1.9	INTEGER	read-only	Minimum time in seconds that this MPS waits before giving up on a pending resolution request.
INT wfmpsActualDefaultHoldingTime	1.3.6.1.4.1.18.3.5.9.10.3.1.10	INTEGER	read-only	The actual Holding Time in minutes used in NHRP Resolution Replies.
INT wfmpsActSlot	1.3.6.1.4.1.18.3.5.9.10.3.1.11	INTEGER	read-only	The Slot number of the slot on which this MPS is instantiated.
OCT wfmpsActualCtrlAtmAddr	1.3.6.1.4.1.18.3.5.9.10.3.1.12	OCTET STRING	read-only	The Actual MPS's Control ATM Address. There exists one Control ATM Address per MPS, therefore, the value of this entry is unique within the table.
wfmpsStatisticsTable	1.3.6.1.4.1.18.3.5.9.10.4		not-accessible	This table represents the statistical information for the MPSs, which this agent manages.
wfmpsStatisticsEntry	1.3.6.1.4.1.18.3.5.9.10.4.1		not-accessible	Each row in this table contains statistics for one MPOA server.
INT wfmpsStatIndex	1.3.6.1.4.1.18.3.5.9.10.4.1.1	INTEGER	read-only	This is the mps index
CTR wfmpsStatRxMpoaResolveRequests	1.3.6.1.4.1.18.3.5.9.10.4.1.2	Counter	read-only	The number of MPOA Resolve Requests received by this MPS which are translated to NHRP resolve requests. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times, as indicated by the value of wfmpsDiscontinuityTime.
CTR wfmpsStatTxMpoaResolveReplyAcks	1.3.6.1.4.1.18.3.5.9.10.4.1.3	Counter	read-only	The number of MPOA Resolve Replies transmitted by this MPS which contain the MPOA CIE Code of 0x00 - Success. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times, as indicated by the value of mpsDiscontinuityTime.
CTR wfmpsStatTxMpoaResolveReplyInsufECResources	1.3.6.1.4.1.18.3.5.9.10.4.1.4	Counter	read-only	The number of MPOA Resolve Replies transmitted by this MPS which contain the MPOA CIE Code of 0x81 - Insufficient resources to accept egress cache entry. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times, as indicated by the value of mpsDiscontinuityTime.
CTR wfmpsStatTxMpoaResolveReplyInsufSCResources	1.3.6.1.4.1.18.3.5.9.10.4.1.5	Counter	read-only	The number of MPOA Resolve Replies transmitted by this MPS which contain the MPOA CIE Code of 0x82 - Insufficent resources to accept shortcut. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times, as indicated by the value of mpsDiscontinuityTime.
CTR wfmpsStatTxMpoaResolveReplyInsufEitherResources	1.3.6.1.4.1.18.3.5.9.10.4.1.6	Counter	read-only	The number of MPOA Resolve Replies transmitted by this MPS which contain the MPOA CIE CODE of 0x83 - Insufficient resources to accept either shortcut or egress cache entry. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times, as indicated by the value of mpsDiscontinuityTime.
CTR wfmpsStatTxMpoaResolveReplyUnsupportedInetProt	1.3.6.1.4.1.18.3.5.9.10.4.1.7	Counter	read-only	The number of MPOA Resolve Replies transmitted by this MPS which contain the MPOA CIE CODE of 0x84 - Unsupported Internetwork Layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times, as indicated by the value of mpsDiscontinuityTime.
CTR wfmpsStatTxMpoaResolveReplyUnsupportedMacEncaps	1.3.6.1.4.1.18.3.5.9.10.4.1.8	Counter	read-only	The number of MPOA Resolve Replies transmitted by this MPS which contain the MPOA CIE CODE of 0x85 - Unsupported MAC layer encapsulation. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times, as indicated by the value of mpsDiscontinuityTime.
CTR wfmpsStatTxMpoaResolveReplyUnspecifiedOther	1.3.6.1.4.1.18.3.5.9.10.4.1.9	Counter	read-only	The number of MPOA Resolve Replies transmitted by this MPS which contain the MPOA CIE CODE of 0x88 - Unspecified/Other. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times, as indicated by the value of mpsDiscontinuityTime.
CTR wfmpsStatTxMpoaResolveReplyOther	1.3.6.1.4.1.18.3.5.9.10.4.1.10	Counter	read-only	The number of MPOA Resolve Replies transmitted by this MPS which are not counted above. NOTE - this would include NHRP errors. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times, as indicated by the value of mpsDiscontinuityTime.
CTR wfmpsStatGiveupTimeExpireds	1.3.6.1.4.1.18.3.5.9.10.4.1.11	Counter	read-only	The number of times the MPS Give up Time (MPS-p6) has expired while waiting for a reply from a re-originated MPOA resolution request, i.e. a reply for a translated NHRP resolution request. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times, as indicated by the value of mpsDiscontinuityTime.
CTR wfmpsStatTxMpoaImpRequests	1.3.6.1.4.1.18.3.5.9.10.4.1.12	Counter	read-only	The number of MPOA Cache Imposition Requests transmitted by this MPS. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times, as indicated by the value of mpsDiscontinuityTime.
CTR wfmpsStatRxMpoaImpReplyAcks	1.3.6.1.4.1.18.3.5.9.10.4.1.13	Counter	read-only	The number of successful MPOA Cache Imposition Replies received by this MPS which contain an MPOA CIE Code of 0x00, Success. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times, as indicated by the value of mpsDiscontinuityTime.
CTR wfmpsStatRxMpoaImpReplyInsufECResources	1.3.6.1.4.1.18.3.5.9.10.4.1.14	Counter	read-only	The number of MPOA Cache Imposition Replies received by this MPS which contain the MPOA CIE Code of 0x81, Insufficient resources to accept egress cache entry. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times, as indicated by the value of mpsDiscontinuityTime.
CTR wfmpsStatRxMpoaImpReplyInsufSCResources	1.3.6.1.4.1.18.3.5.9.10.4.1.15	Counter	read-only	The number of MPOA Cache Imposition Replies received by this MPS which contain the MPOA CIE Code of 0x82 - Insufficient resources to accept shortcut. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times, as indicated by the value of mpsDiscontinuityTime.
CTR wfmpsStatRxMpoaImpReplyInsufEitherResources	1.3.6.1.4.1.18.3.5.9.10.4.1.16	Counter	read-only	The number of MPOA Cache Imposition Replies received by this MPS which contain the MPOA CIE Code of 0x83 - Insufficient resources to accept either shortcut or egress cache entry. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times, as indicated by the value of mpsDiscontinuityTime.
CTR wfmpsStatRxMpoaImpReplyUnsupportedInetProt	1.3.6.1.4.1.18.3.5.9.10.4.1.17	Counter	read-only	The number of MPOA Cache Imposition Replies received by this MPS which contain the MPOA CIE Code of 0x84 - Unsupported Internetwork Layer protocol. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times, as indicated by the value of mpsDiscontinuityTime.
CTR wfmpsStatRxMpoaImpReplyUnsupportedMacEncaps	1.3.6.1.4.1.18.3.5.9.10.4.1.18	Counter	read-only	The number of MPOA Cache Imposition Replies received by this MPS which contain the MPOA CIE Code of 0x85 - Unsupported MAC layer encapsulation. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times, as indicated by the value of mpsDiscontinuityTime.
CTR wfmpsStatRxMpoaImpReplyUnspecifiedOther	1.3.6.1.4.1.18.3.5.9.10.4.1.19	Counter	read-only	The number of MPOA Cache Imposition Replies received by this MPS which contain the MPOA CIE Code of 0x88 - Unspecified/Other. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times, as indicated by the value of mpsDiscontinuityTime.
CTR wfmpsStatRxMpoaImpReplyOther	1.3.6.1.4.1.18.3.5.9.10.4.1.20	Counter	read-only	The number of MPOA Cache Imposition Replies received by this MPS which are not counted previously. NOTE - this would include NHRP errors. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times, as indicated by the value of mpsDiscontinuityTime.
CTR wfmpsStatRxMpoaEgressCachePurgeRequests	1.3.6.1.4.1.18.3.5.9.10.4.1.21	Counter	read-only	The number of MPOA Egress Cache Purges Requests received by this MPS. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times, as indicated by the value of mpsDiscontinuityTime.
CTR wfmpsStatTxMpoaEgressCachePurgeReplies	1.3.6.1.4.1.18.3.5.9.10.4.1.22	Counter	read-only	The number of MPOA Egress Cache Purge Replies transmitted by this MPS. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times, as indicated by the value of mpsDiscontinuityTime.
CTR wfmpsStatTxMpoaTriggers	1.3.6.1.4.1.18.3.5.9.10.4.1.23	Counter	read-only	The number of MPOA Trigger messages transmitted by this MPS. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times, as indicated by the value of mpsDiscontinuityTime.
CTR wfmpsStatTxNhrpResolveRequests	1.3.6.1.4.1.18.3.5.9.10.4.1.24	Counter	read-only	Total count of MPOA Resolution Requests received by the Ingress MPS which were translated to NHRP Resolution Requests and transmitted to the NHS. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times, as indicated by the value of mpsDiscontinuityTime.
CTR wfmpsStatRxNhrpResolveReplies	1.3.6.1.4.1.18.3.5.9.10.4.1.25	Counter	read-only	Total count of NHRP Resolution Replies received by the Ingress. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times, as indicated by the value of mpsDiscontinuityTime.
CTR wfmpsStatRxNhrpResolveRequests	1.3.6.1.4.1.18.3.5.9.10.4.1.26	Counter	read-only	Total count of NHRP Resolution Requests received by the Egress MPS from the NHS. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times, as indicated by the value of mpsDiscontinuityTime.
CTR wfmpsStatTxNhrpResolveReplies	1.3.6.1.4.1.18.3.5.9.10.4.1.27	Counter	read-only	Total count of NHRP Resolution Replies transmitted by the Egress MPS to the NHS. Discontinuities in the value of this counter can occur at re-initialization of the management system, and/or re-initialization of the MPS, and at other times, as indicated by the value of mpsDiscontinuityTime.
INT wfmpsStatSlot	1.3.6.1.4.1.18.3.5.9.10.4.1.28	INTEGER	read-only	The Slot number of the slot on which this MPS is instantiated.
wfmpsProtocolTable	1.3.6.1.4.1.18.3.5.9.10.5		not-accessible	List of protocols, per MPS, for which MPOA resolution is enabled.
wfmpsProtocolEntry	1.3.6.1.4.1.18.3.5.9.10.5.1		not-accessible	Each row indicates one protocol for which an MPS will perform MPOA resolution. If the corresponding MPS entry in wfmpsStatusTable has wfmpsActualConfigMode set to automatic, and the appropriate bit in wfmpsActualConfigMask (MPS-p3, bit 3) is set to 1, then values retrieved from the LECS are reflected in this table and the wfmpsLECSValue object will be (1) true. Also, the user can create rows which appropriately correspond to the MPS denoted by wfmpsIndex, and the wfmpsLECSValue object will be set to (2) false. NOTE - if the LECS does not return information for the MPS-p3 parameter, or if in manual mode, the user should create at least one entry for the corresponding MPS. Both, LECS and user-created rows may exist in this Table. This means that if the MPS was last re-initialized in in automatic mode (see wfmpsActualConfigMode), the set of rows is a union of values retreived from the LECS and manually configured.
INT wfmpsProtocolDelete	1.3.6.1.4.1.18.3.5.9.10.5.1.1	INTEGER	read-write	Indication to create or delete an MPS Protocol Entry from the MIB
INT wfmpsProtocolRowStatus	1.3.6.1.4.1.18.3.5.9.10.5.1.2	INTEGER	read-write	This object allows network managers to enable resolution for the 'wfmpsInternetworkLayerProtocol'.
INT wfmpsProtIndex	1.3.6.1.4.1.18.3.5.9.10.5.1.3	INTEGER	read-only	This is the mps index
OCT wfmpsInternetworkLayerProtocol	1.3.6.1.4.1.18.3.5.9.10.5.1.4	OCTET STRING	read-only	MPS-p3 A protocol on which to perform MPOA resolution.
INT wfmpsLECSValue	1.3.6.1.4.1.18.3.5.9.10.5.1.5	INTEGER	read-only	This object reflects if the current entry is due to a retrieval from the LECS or not. If this entry is due to the LECS, then true(1) is the value for this object, otherwise, false (2).
INT wfmpsProtSlot	1.3.6.1.4.1.18.3.5.9.10.5.1.6	INTEGER	read-only	The Slot number of the slot on which this MPS is instantiated.
wfmpsMappingTable	1.3.6.1.4.1.18.3.5.9.10.6		not-accessible	A table mapping the 'lecIndex' values of LANE Clients to the 'wfmpsIndex' values of corresponding MPOA Servers.
wfmpsMappingEntry	1.3.6.1.4.1.18.3.5.9.10.6.1		not-accessible	Each row defines one lecIndex --> wfmpsIndex mapping. The wfmpsIndex that a lecIndex maps to is not necessarily unique. In other words, there can be multiple LECs associated with one MPS.
INT wfmpsMappingDelete	1.3.6.1.4.1.18.3.5.9.10.6.1.1	INTEGER	read-write	Indication to create or delete an MPS Mapping Entry from the MIB
INT wfmpsMappingRowStatus	1.3.6.1.4.1.18.3.5.9.10.6.1.2	INTEGER	read-write	Allows creation, enabling/disabling of this row.
INT wfmpslecIndex	1.3.6.1.4.1.18.3.5.9.10.6.1.3	INTEGER	read-only	Mapped lec index.
INT wfmpsMapIndex	1.3.6.1.4.1.18.3.5.9.10.6.1.4	INTEGER	read-write	The wfmpsMapIndex of the MPOA Server that is associated with this LEC. The wfmpsMapIndex corresponds to the wfmpsIndex.
INT wfmpsMapSlot	1.3.6.1.4.1.18.3.5.9.10.6.1.5	INTEGER	read-write	The Slot number of the slot on which this MPS is instantiated.
wfmpsIngressCacheTable	1.3.6.1.4.1.18.3.5.9.10.7		not-accessible	This table tracks all the Ingress Cache information of the MPSs which this agents manages.
wfmpsIngressCacheEntry	1.3.6.1.4.1.18.3.5.9.10.7.1		not-accessible	A entry contains parameters and state variables for a row in a MPS's Ingress Cache.
INT wfmpsIngressIndex	1.3.6.1.4.1.18.3.5.9.10.7.1.1	INTEGER	read-only	This is the mps index
INT wfmpsIngressMpcIndex	1.3.6.1.4.1.18.3.5.9.10.7.1.2	INTEGER	read-only	This is the mpc index
INT wfmpsIngressCacheDestInternetworkAddrType	1.3.6.1.4.1.18.3.5.9.10.7.1.3	INTEGER	read-only	The type of internetwork layer address of the Destination Address.
OCT wfmpsIngressCacheDestAddr	1.3.6.1.4.1.18.3.5.9.10.7.1.4	OCTET STRING	read-only	The Ingress MPS Destination Internetwork Layer Address.
INT wfmpsIngressCachePrefixLen	1.3.6.1.4.1.18.3.5.9.10.7.1.5	INTEGER	read-only	The Prefix Length of the wfmpsIngressCacheDestAddr.
INT wfmpsIngressCacheState	1.3.6.1.4.1.18.3.5.9.10.7.1.6	INTEGER	read-only	The state of this entry.
INT wfmpsIngressCacheSrcInternetworkAddrType	1.3.6.1.4.1.18.3.5.9.10.7.1.7	INTEGER	read-only	The type of internetwork layer address of the Source Address.
OCT wfmpsIngressCacheSrcAddr	1.3.6.1.4.1.18.3.5.9.10.7.1.8	OCTET STRING	read-only	The Ingress MPS Source Internetwork Layer Address.
OCT wfmpsIngressCacheSourceMpcAtmAddr	1.3.6.1.4.1.18.3.5.9.10.7.1.9	OCTET STRING	read-only	The ATM Adress from the source of this MPOA request. In other words, the Ingress MPC's Control Atm Address.
OCT wfmpsIngressCacheResolvedAtmAddr	1.3.6.1.4.1.18.3.5.9.10.7.1.10	OCTET STRING	read-only	The ATM Adress which has been resolved by an Egress MPC.
INT wfmpsIngressCacheHoldTime	1.3.6.1.4.1.18.3.5.9.10.7.1.11	INTEGER	read-only	Time interval that this value is valid.
INT wfmpsIngressCacheMpoaRequestId	1.3.6.1.4.1.18.3.5.9.10.7.1.12	INTEGER	read-only	The request ID contained in the MPOA resolution request from the local Ingress MPC.
INT wfmpsIngressCacheNhrpRequestId	1.3.6.1.4.1.18.3.5.9.10.7.1.13	INTEGER	read-only	The request ID which this MPS generates to identify the NHRP resolution request.
INT wfmpsIngressCacheServiceCategory	1.3.6.1.4.1.18.3.5.9.10.7.1.14	INTEGER	read-only	The request ID which this MPS generates to identify the NHRP resolution request.
INT wfmpsIngressSlot	1.3.6.1.4.1.18.3.5.9.10.7.1.15	INTEGER	read-only	The Slot number of the slot on which this MPS is instantiated.
wfmpsEgressCacheTable	1.3.6.1.4.1.18.3.5.9.10.8		not-accessible	This table contains information regarding the Egress MPOA Server Cache Table.
wfmpsEgressCacheEntry	1.3.6.1.4.1.18.3.5.9.10.8.1		not-accessible	An entry represents an entry in the MPS's Egress cache Table which keeps track of the state of the impositions.
INT wfmpsEgressIndex	1.3.6.1.4.1.18.3.5.9.10.8.1.1	INTEGER	read-only	This is the mps index
INT wfmpsEgressMpcIndex	1.3.6.1.4.1.18.3.5.9.10.8.1.2	INTEGER	read-only	This is the mpc index
INT wfmpsEgressCacheId	1.3.6.1.4.1.18.3.5.9.10.8.1.3	INTEGER	read-only	The id which identifies this cache entry.
INT wfmpsEgressCacheHoldTime	1.3.6.1.4.1.18.3.5.9.10.8.1.4	INTEGER	read-only	Time interval that this value is valid.
INT wfmpsEgressCacheState	1.3.6.1.4.1.18.3.5.9.10.8.1.5	INTEGER	read-only	The state of the entry.
OCT wfmpsEgressCacheDataLinkHeader	1.3.6.1.4.1.18.3.5.9.10.8.1.6	OCTET STRING	read-only	Data-Link Layer Header.
INT wfmpsEgressCacheElanId	1.3.6.1.4.1.18.3.5.9.10.8.1.7	INTEGER	read-only	The elan id that this Cache Imposition is sent on
OCT wfmpsEgressCacheSourceClientAtmAddr	1.3.6.1.4.1.18.3.5.9.10.8.1.8	OCTET STRING	read-only	The Ingress NHC's Atm Address used in the original cache imposition.
INT wfmpsEgressCacheNhrpRequestId	1.3.6.1.4.1.18.3.5.9.10.8.1.9	INTEGER	read-only	The request id from the original NHRP Resolution Request, may be only useful in the Resolving State.
INT wfmpsEgressCacheMpoaRequestId	1.3.6.1.4.1.18.3.5.9.10.8.1.10	INTEGER	read-only	The new request id which is generated for this imposition's request, may be only useful in the Resolving State.
INT wfmpsEgressCacheServiceCategory	1.3.6.1.4.1.18.3.5.9.10.8.1.11	INTEGER	read-only	The service categories supported for this shortcut
INT wfmpsEgressCacheNextHopInternetworkAddrType	1.3.6.1.4.1.18.3.5.9.10.8.1.12	INTEGER	read-only	The NextHop protocol address type.
OCT wfmpsEgressCacheNextHopAddr	1.3.6.1.4.1.18.3.5.9.10.8.1.13	OCTET STRING	read-only	The NextHop protocol address.
INT wfmpsEgressSlot	1.3.6.1.4.1.18.3.5.9.10.8.1.14	INTEGER	read-only	The Slot number of the slot on which this MPS is instantiated.
wfmpsMpcTable	1.3.6.1.4.1.18.3.5.9.10.9		not-accessible	A table contains information about the MPCs that these MPSs know about.
wfmpsMpcEntry	1.3.6.1.4.1.18.3.5.9.10.9.1		not-accessible	Each row defines one MPC identified by an index and its control ATM address.
INT wfmpsMpsIndex	1.3.6.1.4.1.18.3.5.9.10.9.1.1	INTEGER	read-only	Local Index (instance )of the Mps.
INT wfmpsMpcIndex	1.3.6.1.4.1.18.3.5.9.10.9.1.2	INTEGER	read-write	The local index for the mpc represented by this entry
OCT wfmpsMpcCtrlAtmAddr	1.3.6.1.4.1.18.3.5.9.10.9.1.3	OCTET STRING	read-write	MPC control ATM address.
INT wfmpsMpcSlot	1.3.6.1.4.1.18.3.5.9.10.9.1.4	INTEGER	read-write	The Slot number of the slot on which this MPS is instantiated.
wfmpsDebugTable	1.3.6.1.4.1.18.3.5.9.10.10		not-accessible	The MPOA Server Debug Message Creation Table. This table represents the attributes necessary to send a message to the approprieate MPS gates for debug purpose.
wfmpsDebugEntry	1.3.6.1.4.1.18.3.5.9.10.10.1		not-accessible	MPOA Server Debugd Entry. Each entry contains identity of the MPS being Debugged.
INT wfmpsDebugSlot	1.3.6.1.4.1.18.3.5.9.10.10.1.1	INTEGER	read-only	The Slot number of the slot on which this MPS is ainstantiated.
INT wfmpsDebugIndex	1.3.6.1.4.1.18.3.5.9.10.10.1.2	INTEGER	read-write	A value which uniquely identifies an mps being debugged.
INT wfmpsDebugDestGid	1.3.6.1.4.1.18.3.5.9.10.10.1.3	INTEGER	read-write	Send the message to the gate specified.
OCT wfmpsDebugMsg	1.3.6.1.4.1.18.3.5.9.10.10.1.4	OCTET STRING	read-write	Send the gived message to DestId.
INT wfmpsDebugSendEnable	1.3.6.1.4.1.18.3.5.9.10.10.1.5	INTEGER	read-write	Send the message if enabled.
INT wfmpsDebugSignalNum	1.3.6.1.4.1.18.3.5.9.10.10.1.6	INTEGER	read-write	Send the given signal to DestId.
INT wfmpsDebugSignalSendEnable	1.3.6.1.4.1.18.3.5.9.10.10.1.7	INTEGER	read-write	Send the Signal if enabled.

RFC description

MPOA Server (MPS) MIB for managing Wellfleet MPOA cache and address generation modes in networks.

Start monitoring Wellfleet router with Multiprotocol Server (MPS) module, Bay Networks/Nortel router (module operational-status/forwarding-statistics status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download Wellfleet-WFMPS-MIB

What Is Wellfleet-WFMPS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description