Wellfleet-OCX-MIB

Description: Manages Wellfleet OC-n SONET/SDH interface configurations across multiple optical rate interfaces.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Wellfleet-OCX-MIB is a Wellfleet/Bay Networks vendor MIB for managing OC-n SONET/SDH optical interface cards across multiple optical rate options (e.g., OC-3, OC-12). It exposes per-interface configuration such as framing mode and rate, along with optical-line status objects across the supported interfaces. For hardware monitoring it is used to confirm that optical transceivers and framers are operating correctly, tracking loss-of-signal, loss-of-frame, or alarm indication signal conditions that reveal fiber or optical hardware faults. It builds on the standard SONET/SDH MIB (RFC 2558) conventions while adding Wellfleet-specific multi-rate card management. It is deployed on Wellfleet/Bay Networks routers used as SONET/SDH-attached core or edge devices in carrier and large enterprise backbones. Engineers can download the Wellfleet-OCX-MIB file directly to load it into their MIB browser.

An operator would poll the optical interface configuration table to confirm each OC-n port is configured for the correct rate and framing (SONET vs SDH), and check line status objects for loss-of-signal or alarm conditions. A port reporting a persistent loss-of-frame alarm would indicate a fiber cut or optical transceiver failure on that interface. No sample object names were provided for this MIB, so this scenario is inferred from the stated short description rather than confirmed objects.

OCx optical interface configuration and status monitoring for SONET/SDH connectivity.