WWP-LEOS-IP-INTERFACE-MIB

All MIBs › WWP-LEOS-IP-INTERFACE-MIB

Organization: Ciena, Inc

Last Updated: 2008-05-14

Category: Ciena LEOS Carrier Ethernet

Description: Manages Ciena LEOS IP interface addressing, VLAN routing configuration, and gateway settings.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WWP-LEOS-IP-INTERFACE-MIB?

WWP-LEOS-IP-INTERFACE-MIB is a Ciena (World Wide Packets, LEOS platform) proprietary MIB configuring IP interfaces on Ciena carrier Ethernet switches. Its interface table records name, IP address, subnet, and cross-reference to the standard ifIndex, an extended table adding enable state, VLAN ID, management-packet priority, and address-change notification enable/notification object, and a separate data-interface table (as opposed to management interfaces) recording IP address, mask, VLAN, type, ifIndex, MAC address, and MTU. As a configuration/status MIB it lets an administrator confirm an IP interface's VLAN and address assignment, and get notified when a gateway or interface address changes. It is deployed on Ciena (World Wide Packets LEOS) carrier Ethernet switches. Engineers can download the WWP-LEOS-IP-INTERFACE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WWP-LEOS-IP-INTERFACE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ciena (World Wide Packets LEOS) carrier Ethernet switches

Monitoring Examples

An administrator subscribes to wwpLeosIpInterfaceAddrChgNotification to get alerted whenever a management IP interface's address changes unexpectedly on a Ciena LEOS switch.

What Can Be Monitored

IP interface address/VLAN configuration
address-change notifications

Imported Objects

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

From WWP-SMI

wwpModulesLeos

OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using wwpLeosIpAclCacheHit OID:

Select a Ciena (World Wide Packets LEOS) carrier Ethernet switch (IP-interface VLAN/address-assignment status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type wwpLeosIpAclCacheHit into the Find box to locate it in the OID tree, then select it and click OK. It reports the count of the number of lookups satisfied by a cache hit. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
wwpLeosIpInterfaceMIB	1.3.6.1.4.1.6141.2.60.24			Added the operational gateway and a trap for gateway changes
wwpLeosIpInterfaceMIBObjects	1.3.6.1.4.1.6141.2.60.24.1
wwpLeosIpInterface	1.3.6.1.4.1.6141.2.60.24.1.1
wwpLeosIpInterfaceTable	1.3.6.1.4.1.6141.2.60.24.1.1.1		not-accessible	Table of IP addresses and associated subnet mask.
wwpLeosIpInterfaceEntry	1.3.6.1.4.1.6141.2.60.24.1.1.1.1		not-accessible	Interface IP and subnet mask entry. These interfaces are used to cause the switch CPU to become involved with the IP traffic. By default, a minimum of two interfaces must always exist, one for the local management interface, one for the remote management interface, and one or more for voice over IP.
I32 wwpLeosIpInterfaceIndex	1.3.6.1.4.1.6141.2.60.24.1.1.1.1.1	Integer32	read-only	Unique index into the table.
STR wwpLeosIpInterfaceName	1.3.6.1.4.1.6141.2.60.24.1.1.1.1.2	DisplayString	read-only	The friendly name for the IP interface.
IP wwpLeosIpInterfaceIpAddr	1.3.6.1.4.1.6141.2.60.24.1.1.1.1.3	IpAddress	read-write	IP address associated with this interface.
IP wwpLeosIpInterfaceSubnet	1.3.6.1.4.1.6141.2.60.24.1.1.1.1.4	IpAddress	read-write	The subnet mask associated with this ip address/interface.
INT wwpLeosIpInterfaceIfIndexXref	1.3.6.1.4.1.6141.2.60.24.1.1.1.1.5	INTEGER	read-only	Cross reference to MIB-2 Interfaces ifIndex.
wwpLeosIpExtInterfaceTable	1.3.6.1.4.1.6141.2.60.24.1.1.2		not-accessible	A table that contains Interface Specific information maintained by each interface.
wwpLeosIpExtInterfaceEntry	1.3.6.1.4.1.6141.2.60.24.1.1.2.1		not-accessible	A list of interfaces additional configuration parameters maintained by each interface.
T/F wwpLeosIpInterfaceEnable	1.3.6.1.4.1.6141.2.60.24.1.1.2.1.1	TruthValue	read-write	The status of each interface. A value of true(1) indicates that this interface is enabled and a value of false(2) indicates that this interface is disabled. The device shouldn't allow the Management Station to disable all the interfaces available on the box.
VLA wwpLeosIpInterfaceVlanId	1.3.6.1.4.1.6141.2.60.24.1.1.2.1.2	VlanId	read-write	The vlanId associated with this IP interface. The vlan indicated by wwpLeosIpInterfaceVlanId should exist in the Vlan Table. If an interface has no VLAN associated, then any read on this object should return 'noSuchInstance'.
INT wwpLeosIpInterfaceMgmtPktPriority	1.3.6.1.4.1.6141.2.60.24.1.1.2.1.3	INTEGER	read-write	The 802.1p Priority value for the management traffic on this interface.
T/F wwpLeosIpInterfaceAddrNotifEnabled	1.3.6.1.4.1.6141.2.60.24.1.1.3	TruthValue	read-write	This variable indicates whether the system generates the wwpLeosIpInterfaceAddrChgNotification. A false value prevents this notifications from being generated by this system.
wwpLeosIpDataInterfaceTable	1.3.6.1.4.1.6141.2.60.24.1.1.4		not-accessible	Data Interface IP and subnet mask entry. To create a loopback interface in this table, following attributes must be specified. wwpLeosIpDataInterfaceIndex wwpLeosIpDataInterfaceName wwpLeosIpDataInterfaceIpAddr wwpLeosIpDataInterfaceType must be set to 'loopback'. wwpLeosIpDataInterfaceVlanId defaults to 1 and cannot be set or changed. No other MIB object should be set otherwise error will be returned. To create a regular Data interface the following attributes must be specified. wwpLeosIpDataInterfaceIndex wwpLeosIpDataInterfaceName wwpLeosIpDataInterfaceIpAddr wwpLeosIpDataInterfaceMask wwpLeosIpDataInterfaceVlanId must be specified when the interface is created. It cannot be changed after creation. wwpLeosIpDataRowStatus must be set to 'createAndGo'.
wwpLeosIpDataInterfaceEntry	1.3.6.1.4.1.6141.2.60.24.1.1.4.1		not-accessible	Each entry represents a Data interface configuration parameter.
INT wwpLeosIpDataInterfaceIndex	1.3.6.1.4.1.6141.2.60.24.1.1.4.1.1	INTEGER	read-only	Unique index into the table.
STR wwpLeosIpDataInterfaceName	1.3.6.1.4.1.6141.2.60.24.1.1.4.1.2	DisplayString	read-create	The name for this Data IP interface.
IP wwpLeosIpDataInterfaceIpAddr	1.3.6.1.4.1.6141.2.60.24.1.1.4.1.3	IpAddress	read-create	IP address associated with this interface.
IP wwpLeosIpDataInterfaceMask	1.3.6.1.4.1.6141.2.60.24.1.1.4.1.4	IpAddress	read-create	The subnet mask associated with this ip address/interface.
VLA wwpLeosIpDataInterfaceVlanId	1.3.6.1.4.1.6141.2.60.24.1.1.4.1.5	VlanId	read-create	The vlanId associated with this Data IP interface. This vlan must already exist on the device. The vlanId must be specified when the interface is created. It cannot be set after creation. The vlanId cannot be specified and defaults to 1 for a loopback interface.
INT wwpLeosIpDataInterfaceType	1.3.6.1.4.1.6141.2.60.24.1.1.4.1.6	INTEGER	read-create	The type of Data IP interface.
I32 wwpLeosIpDataInterfaceIfIndex	1.3.6.1.4.1.6141.2.60.24.1.1.4.1.7	Integer32	read-only	The unique interface index assigned by INET.
MAC wwpLeosIpDataInterfaceMac	1.3.6.1.4.1.6141.2.60.24.1.1.4.1.8	MacAddress	read-only	MAC address assigned by the device to this Data interface.
I32 wwpLeosIpDataInterfaceIfMtu	1.3.6.1.4.1.6141.2.60.24.1.1.4.1.9	Integer32	read-create	The size of the largest packet which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface.
ROW wwpLeosIpDataInterfaceRowStatus	1.3.6.1.4.1.6141.2.60.24.1.1.4.1.10	RowStatus	read-create	Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, a manager must set this object to 'destroy'. If the entry exists, it will be displayed as 'active'.
IP wwpLeosIpInterfaceOperationalGateway	1.3.6.1.4.1.6141.2.60.24.1.1.5	IpAddress	read-only	Operational gateway IP address.
wwpLeosIpAclGlobal	1.3.6.1.4.1.6141.2.60.24.1.2
INT wwpLeosIpAclState	1.3.6.1.4.1.6141.2.60.24.1.2.1	INTEGER	read-write	This object allows to globally configure IP ACL state.
C32 wwpLeosIpAclCacheHitEx	1.3.6.1.4.1.6141.2.60.24.1.2.2	Counter32	read-only	Count of the number of lookups satisfied by a cache hit.
C32 wwpLeosIpAclNoHit	1.3.6.1.4.1.6141.2.60.24.1.2.3	Counter32	read-only	Count of the number of lookups which failed because the source ip address did not match a table entry.
C32 wwpLeosIpAclBadPort	1.3.6.1.4.1.6141.2.60.24.1.2.4	Counter32	read-only	Count of the number of lookups which failed because the ingress port was disallowed by a table entry.
ROW wwpLeosIpAclClearStats	1.3.6.1.4.1.6141.2.60.24.1.2.5	RowStatus	read-write	Set this object to 'destroy' to clear the global and table entry statistics counters.
C32 wwpLeosIpAclBadDscp	1.3.6.1.4.1.6141.2.60.24.1.2.6	Counter32	read-only	Count of the number of lookups which failed because the ingress DSCP value was disallowed by a table entry.
INT wwpLeosIpAclOperState	1.3.6.1.4.1.6141.2.60.24.1.2.7	INTEGER	read-only	The current operational state of the IP ACL system.
C32 wwpLeosIpAclInUseEntries	1.3.6.1.4.1.6141.2.60.24.1.2.8	Counter32	read-only	Count of the number of IP ACL rules that are currently configured.
C32 wwpLeosIpAclMaxEntries	1.3.6.1.4.1.6141.2.60.24.1.2.9	Counter32	read-only	Count of the max number of IP ACL rules that can be configured.
wwpLeosIpAclRules	1.3.6.1.4.1.6141.2.60.24.1.3
wwpLeosIpAclTable	1.3.6.1.4.1.6141.2.60.24.1.3.1		not-accessible	The (conceptual) table listing the display parameters for the IP ACL table.
wwpLeosIpAclEntry	1.3.6.1.4.1.6141.2.60.24.1.3.1.1		not-accessible	An entry (conceptual row) in the wwpLeosIpAclTable.
IP wwpLeosIpAclEntryIpAddr	1.3.6.1.4.1.6141.2.60.24.1.3.1.1.1	IpAddress	read-create	This object is the IP network which will be authorized.
IP wwpLeosIpAclEntryIpMask	1.3.6.1.4.1.6141.2.60.24.1.3.1.1.2	IpAddress	read-create	This object is the netmask for the IP network which will be authorized.
U32 wwpLeosIpAclEntryPortMask	1.3.6.1.4.1.6141.2.60.24.1.3.1.1.3	Unsigned32	read-create	This object is used to specify the physical ports which frames will be allowed to ingress from. The mask is big endian and each bit, numbered from 0 to 27, represents a physical port numbered from 1 to 28. A value of 0xFFFFFFFF may be used to specify all ports.
C32 wwpLeosIpAclEntryHits	1.3.6.1.4.1.6141.2.60.24.1.3.1.1.4	Counter32	read-only	Count of the number of lookups which matched the table entry.
C32 wwpLeosIpAclEntryBadPort	1.3.6.1.4.1.6141.2.60.24.1.3.1.1.5	Counter32	read-only	Count of the number of lookups which failed because the ingress port was disallowed by the table entry.
ROW wwpLeosIpAclEntryStatus	1.3.6.1.4.1.6141.2.60.24.1.3.1.1.6	RowStatus	read-create	Set this object to 'CreateAndGo' to create a new table entry, set it to 'destroy' to remove an existing entry.
OCT wwpLeosIpAclEntryDscpMask	1.3.6.1.4.1.6141.2.60.24.1.3.1.1.7	OCTET STRING	read-create	This object is used to specify the DSCP values for which IP packets will be allowed to ingress. The mask is big endian and each bit, numbered from 0 to 63, represents a DSCP value numbered from 0 to 63. A value of 0xFFFFFFFFFFFFFFFF may be used to specify all.
C32 wwpLeosIpAclEntryBadDscp	1.3.6.1.4.1.6141.2.60.24.1.3.1.1.8	Counter32	read-only	Count of the number of lookups which failed because the ingress DSCP value was disallowed by the table entry.
OCT wwpLeosIpAclEntryPortBitMask	1.3.6.1.4.1.6141.2.60.24.1.3.1.1.9	OCTET STRING	read-create	This object is used to specify the physical ports which frames will be allowed to ingress from. The mask is big endian and each bit, numbered from 0 to 63, represents a physical port numbered from 1 to 64. A value of 0xFFFFFFFFFFFFFFFF may be used to specify all ports.
wwpLeosIpInterfaceMIBNotificationPrefix	1.3.6.1.4.1.6141.2.60.24.2
wwpLeosIpInterfaceMIBNotifications	1.3.6.1.4.1.6141.2.60.24.2.0
NTF wwpLeosIpInterfaceAddrChgNotification	1.3.6.1.4.1.6141.2.60.24.2.0.1			A wwpLeosIpInterfaceAddrChgNotification is sent whenever the ip address of an interface changes.
NTF wwpLeosIpInterfaceOperationalGatewayChgNotification	1.3.6.1.4.1.6141.2.60.24.2.0.2			A wwpLeosIpOperationalGatewayChgNotification notification will be sent out whenever the operational gateway is changed.
wwpLeosIpInterfaceMIBConformance	1.3.6.1.4.1.6141.2.60.24.3
wwpLeosIpInterfaceMIBCompliances	1.3.6.1.4.1.6141.2.60.24.3.1
wwpLeosIpInterfaceMIBGroups	1.3.6.1.4.1.6141.2.60.24.3.2

RFC description

Configures IP interface parameters on Ciena LEOS equipment including management address and ACL rules.

Start monitoring Ciena (World Wide Packets LEOS) carrier Ethernet switches (IP-interface VLAN/address-assignment status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WWP-LEOS-IP-INTERFACE-MIB