WWP-LEOS-DATAPLANE-MIB

All MIBs › WWP-LEOS-DATAPLANE-MIB

Organization: Ciena, Inc

Last Updated: 2012-06-08

Category: Ciena LEOS Carrier Ethernet

Description: Monitors Ciena LEOS data plane forwarding statistics, flow table utilization, and packet processing performance.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WWP-LEOS-DATAPLANE-MIB?

WWP-LEOS-DATAPLANE-MIB is a Ciena (formerly World Wide Packets) proprietary MIB for LEOS-based Metro Ethernet switches that models the data-plane traffic-shaping and class-of-service (CoS) mapping subsystem, covering egress queue-group scheduling, CoS mapping tables, and per-queue statistics. It exposes performance/statistics data (egress queue-group Q statistics), configuration data (WDRR scheduler granularity, CoS mapping tables for 802.1p, DEI, MPLS-TC, and frame markings), and shaping parameters like port shaper burst sizes. Monitoring it reveals the software/forwarding-plane performance of the switch's QoS engine: queue statistics show whether queues are congested or dropping traffic, a performance-counter style health indicator distinct from physical hardware sensors. It builds on IEEE 802.1p/802.1ad CoS concepts and MPLS traffic-class marking standards for its mapping model, in addition to belonging to the broader WWP-LEOS proprietary MIB family. It is deployed on Ciena/WWP Metro Ethernet switches requiring granular QoS shaping and CoS remarking at the network edge. Engineers can download the WWP-LEOS-DATAPLANE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WWP-LEOS-DATAPLANE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ciena/World Wide Packets Metro Ethernet switch

Monitoring Examples

An operator would poll wwpLeosDpTsQEgressPortQueueGroupQStatsTable entries per egress queue group to track queue/drop counters and spot congestion on a specific CoS queue, and check wwpLeosDpTsDot1dCosMapTable, wwpLeosDpTsDot1dDeiCosMapTable, and wwpLeosDpTsMplsTcCosMapTable to confirm incoming 802.1p, DEI, and MPLS-TC markings map to the correct internal queue, alongside wwpLeosDpTsFrameCosMapTable for frame-based CoS assignment. A spike in drops on the queue stats table combined with a coarse wwpLeosDpTsQEgressPortQueueGroupWdrrSchedulerGranularity setting could indicate the WDRR scheduler is too coarse-grained for the offered traffic mix.

What Can Be Monitored

egress queue group statistics
WDRR scheduler granularity
802.1p/DEI CoS mapping
MPLS traffic-class CoS mapping
frame CoS mapping
port shaper burst size limits

Imported Objects

From SNMPv2-SMI

Counter64
Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TruthValue

From WWP-SMI

wwpModulesLeos

OBJECT-IDENTITY

OIDs

OID symbolic	OID numeric	Type	Access	Description
wwpLeosDataplaneMIB	1.3.6.1.4.1.6141.2.60.500			Changed port shaper burst size limits and per COS cbs and ebs limits
wwpLeosDpMIBObjects	1.3.6.1.4.1.6141.2.60.500.1
wwpLeosDpTs	1.3.6.1.4.1.6141.2.60.500.1.1
wwpLeosDpTsCosMapping	1.3.6.1.4.1.6141.2.60.500.1.1.2
wwpLeosDpTsCosMapProfileEntry	1.3.6.1.4.1.6141.2.60.500.1.1.2.1.1		not-accessible	An entry in the wwpLeosDpTsCosMapProfileTable.
INT wwpLeosDpTsCosMapProfileId	1.3.6.1.4.1.6141.2.60.500.1.1.2.1.1.1	INTEGER	not-accessible	Unique identifier for the resolved cos map profile. The maximum allowed profiles on the device is equal to the number of ports + 1 (Default COS map).
STR wwpLeosDpTsCosMapProfileName	1.3.6.1.4.1.6141.2.60.500.1.1.2.1.1.2	DisplayString	read-create	Name of the COS map profile.
wwpLeosDpTsCosMapProfileTable	1.3.6.1.4.1.6141.2.60.500.1.1.2.1		not-accessible	The (conceptual) table listing the resolved cos map profiles.
ROW wwpLeosDpTsCosMapRowStatus	1.3.6.1.4.1.6141.2.60.500.1.1.2.1.1.3	RowStatus	read-create	Setting this object to createAndGo creates a COS map profile. Setting the object to destroy deletes a COS map profile.
INT wwpLeosDpTsDot1dCosMapDot1dValue	1.3.6.1.4.1.6141.2.60.500.1.1.2.2.1.1	INTEGER	not-accessible	The dot1d cos value.
wwpLeosDpTsDot1dCosMapEntry	1.3.6.1.4.1.6141.2.60.500.1.1.2.2.1		not-accessible	An entry in the wwpLeosDpTsDot1dCosMapTable.
INT wwpLeosDpTsDot1dCosMapRCOS	1.3.6.1.4.1.6141.2.60.500.1.1.2.2.1.2	INTEGER	read-write	The corresponding RCOS value mapped to the dot1d cos value.
wwpLeosDpTsDot1dCosMapTable	1.3.6.1.4.1.6141.2.60.500.1.1.2.2		not-accessible	Conceptual table which represents the dot1d cos map to internal RCOS values for a given profile.
INT wwpLeosDpTsDot1dDeiCosMapDeiValue	1.3.6.1.4.1.6141.2.60.500.1.1.2.4.1.2	INTEGER	not-accessible	The dot1d DEI value (0) green (1) yellow at ingress.
INT wwpLeosDpTsDot1dDeiCosMapDot1dValue	1.3.6.1.4.1.6141.2.60.500.1.1.2.4.1.1	INTEGER	not-accessible	The dot1d COS value.
wwpLeosDpTsDot1dDeiCosMapEntry	1.3.6.1.4.1.6141.2.60.500.1.1.2.4.1		not-accessible	An entry in the wwpLeosDpTsDot1dDeiCosMapTable which is an extended version of wwpLeosDpTsDot1dCosMapTable.
DPT wwpLeosDpTsDot1dDeiCosMapRColorValue	1.3.6.1.4.1.6141.2.60.500.1.1.2.4.1.4	DpTsRCosMappingColor	read-write	The corresponding RColor value mapped to the dot1d cos and dot1dei value.
INT wwpLeosDpTsDot1dDeiCosMapRCosValue	1.3.6.1.4.1.6141.2.60.500.1.1.2.4.1.3	INTEGER	read-write	The corresponding RCos value mapped to the dot1d COS and dot1d DEI value.
wwpLeosDpTsDot1dDeiCosMapTable	1.3.6.1.4.1.6141.2.60.500.1.1.2.4		not-accessible	Conceptual table which represents the dot1d/dot1d-dei cos/color map to internal RCOS/Rcolor values for a given profile. This table is the new Extendedended version of the deprecated wpLeosDpTsDot1dCosMapTable above. It has color attributes now.
INT wwpLeosDpTsDscpCosMapDscpValue	1.3.6.1.4.1.6141.2.60.500.1.1.2.3.1.1	INTEGER	not-accessible	The DSCP cos value.
wwpLeosDpTsDscpCosMapEntry	1.3.6.1.4.1.6141.2.60.500.1.1.2.3.1		not-accessible	An entry in the wwpLeosDpTsDscpCosMapTable.
DPT wwpLeosDpTsDscpCosMapRColorValue	1.3.6.1.4.1.6141.2.60.500.1.1.2.3.1.3	DpTsRCosMappingColor	read-write	The internal resolved color R-Color of the frame. Green (1), Yellow(2) represents frame's internal R-Color.
INT wwpLeosDpTsDscpCosMapRCOS	1.3.6.1.4.1.6141.2.60.500.1.1.2.3.1.2	INTEGER	read-write	The RCOS value to which the DSCP cos is mapped to.
wwpLeosDpTsDscpCosMapTable	1.3.6.1.4.1.6141.2.60.500.1.1.2.3		not-accessible	Conceptual table which represents the DSCP cos map to internal RCOS values for a given profile.
I32 wwpLeosDpTsFrameCosMapDot1dDeiValue	1.3.6.1.4.1.6141.2.60.500.1.1.3.2.1.4	Integer32	read-write	The outgoing frame CFI/DEI frame marking. Green (0), Yellow(1) in the CFI/DEI bit position of the frame represents the frame's outgoing color
I32 wwpLeosDpTsFrameCosMapDot1dValue	1.3.6.1.4.1.6141.2.60.500.1.1.3.2.1.3	Integer32	read-write	The dot1d COS value for the outgoing frame
wwpLeosDpTsFrameCosMapEntry	1.3.6.1.4.1.6141.2.60.500.1.1.3.2.1		not-accessible	An entry in the wwpLeosDpTsRCosToFrameCosMapTable.
I32 wwpLeosDpTsFrameCosMapMplsTcValue	1.3.6.1.4.1.6141.2.60.500.1.1.3.2.1.5	Integer32	read-write	The MPLS TC value for the outgoing frame
wwpLeosDpTsFrameCosMapping	1.3.6.1.4.1.6141.2.60.500.1.1.3
wwpLeosDpTsFrameCosMapProfileEntry	1.3.6.1.4.1.6141.2.60.500.1.1.3.1.1		not-accessible	An entry in the wwpLeosDpTsFrameCosMapProfileTable.
INT wwpLeosDpTsFrameCosMapProfileId	1.3.6.1.4.1.6141.2.60.500.1.1.3.1.1.1	INTEGER	not-accessible	Unique identifier for the frame cos map profile. The maximum allowed profiles on the device is equal to 4 at this time.
STR wwpLeosDpTsFrameCosMapProfileName	1.3.6.1.4.1.6141.2.60.500.1.1.3.1.1.2	DisplayString	read-create	Name of the frame cos map profile.
wwpLeosDpTsFrameCosMapProfileTable	1.3.6.1.4.1.6141.2.60.500.1.1.3.1		not-accessible	The (conceptual) table listing the frame cos map profiles.
DPT wwpLeosDpTsFrameCosMapRColorValue	1.3.6.1.4.1.6141.2.60.500.1.1.3.2.1.2	DpTsRCosMappingColor	not-accessible	The corresponding resolved color value. Green (1) and Yellow(2) get mapped to the dot1d COS/CFI/DEI value.
I32 wwpLeosDpTsFrameCosMapRCosValue	1.3.6.1.4.1.6141.2.60.500.1.1.3.2.1.1	Integer32	not-accessible	The resolved COS value.
ROW wwpLeosDpTsFrameCosMapRowStatus	1.3.6.1.4.1.6141.2.60.500.1.1.3.1.1.3	RowStatus	read-create	Setting this object to createAndGo creates a frame cos map profile. Setting the object to destroy deletes a frame cos map profile.
wwpLeosDpTsFrameCosMapTable	1.3.6.1.4.1.6141.2.60.500.1.1.3.2		not-accessible	Conceptual table which represents the resolved cos to dot1d cos map for a given profile.
wwpLeosDpTsMplsTcCosMapEntry	1.3.6.1.4.1.6141.2.60.500.1.1.2.5.1		not-accessible	An entry in the wwpLeosDpTsMplsTcCosMapTable.
I32 wwpLeosDpTsMplsTcCosMapMplsTcValue	1.3.6.1.4.1.6141.2.60.500.1.1.2.5.1.1	Integer32	not-accessible	The MPLS-TC value.
DPT wwpLeosDpTsMplsTcCosMapRColorValue	1.3.6.1.4.1.6141.2.60.500.1.1.2.5.1.3	DpTsRCosMappingColor	read-write	The corresponding RColor value mapped to the MPLS-TC value.
I32 wwpLeosDpTsMplsTcCosMapRCosValue	1.3.6.1.4.1.6141.2.60.500.1.1.2.5.1.2	Integer32	read-write	The corresponding RCos value mapped to the MPLS-TC value.
wwpLeosDpTsMplsTcCosMapTable	1.3.6.1.4.1.6141.2.60.500.1.1.2.5		not-accessible	Conceptual table which represents the MPLS-TC COS/color map to internal RCOS/Rcolor values for a given profile.
wwpLeosDpTsQCAProfileSREDEntry	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.1.1		not-accessible	An entry (conceptual row) in the wwpLeosDpTsQCAProfileSREDTable.
DPT wwpLeosDpTsQCAProfileSREDGreenDropProbability	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.1.1.5	DpTsQSredDropProbability	read-create	The drop probability value in percentage. This indicates the percentage of green frames to be dropped.
INT wwpLeosDpTsQCAProfileSREDGreenThreshold	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.1.1.4	INTEGER	read-create	The green threshold value for this profile above which all green frames would be dropped.
INT wwpLeosDpTsQCAProfileSREDId	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.1.1.1	INTEGER	not-accessible	The Profile Id
STR wwpLeosDpTsQCAProfileSREDName	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.1.1.2	DisplayString	read-create	The congestion Avoidance Profile name.
ROW wwpLeosDpTsQCAProfileSREDRowStatus	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.1.1.9	RowStatus	read-create	Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this object to 'destroy'.
wwpLeosDpTsQCAProfileSREDTable	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.1		not-accessible	The (conceptual) table listing configuration parameters of congestion Avoidance profile for SRED type of congestion Avoidance Profile type.
DPT wwpLeosDpTsQCAProfileSREDYellowDropProbability	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.1.1.7	DpTsQSredDropProbability	read-create	The drop probability value in percentage. This indicates the percentage of yellow frames to be dropped.
INT wwpLeosDpTsQCAProfileSREDYellowThreshold	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.1.1.6	INTEGER	read-create	The yellow threshold value for this profile above which all green frames would be dropped.
wwpLeosDpTsQCAProfileWREDSimpleEntry	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1		not-accessible	An entry (conceptual row in the wwpLeosDpTsQCAProfileWREDSimpleEntry.
INT wwpLeosDpTsQCAProfileWREDSimpleGreenLowerThreshold	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.13	INTEGER	read-create	Specifies the threshold to begin dropping green frames.
DPT wwpLeosDpTsQCAProfileWREDSimpleGreenMaxDropProbability	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.15	DpTsQWredSimpleMaxDropProbability	read-create	Specifies the maximum drop probability for green frames before hitting the green upper threshold.
INT wwpLeosDpTsQCAProfileWREDSimpleGreenUpperThreshold	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.14	INTEGER	read-create	Specifies the threshold above which all the green frames will be dropped.
INT wwpLeosDpTsQCAProfileWREDSimpleId	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.1	INTEGER	not-accessible	Unique identifier for the WREDSimple profile entry.
STR wwpLeosDpTsQCAProfileWREDSimpleName	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.2	DisplayString	read-create	Profile name associated with this index.
DPT wwpLeosDpTsQCAProfileWREDSimpleNonTCPMaxDropProbability	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.12	DpTsQWredSimpleMaxDropProbability	read-create	Specifies the maximum drop probability for non-TCP frames before hitting the non-TCP upper threshold.
INT wwpLeosDpTsQCAProfileWREDSimpleNonTCPThreshold	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.10	INTEGER	read-create	Specifies the threshold to begin dropping non-TCP frames.
INT wwpLeosDpTsQCAProfileWREDSimpleNonTCPUpperThreshold	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.11	INTEGER	read-create	Specifies the threshold above which all the non-TCP frames will be dropped.
ROW wwpLeosDpTsQCAProfileWREDSimpleRowStatus	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.9	RowStatus	read-create	Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this object to 'destroy'.
wwpLeosDpTsQCAProfileWREDSimpleTable	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2		not-accessible	The (conceptual) table listing configuration parameters of congestion Avoidance profile for Simple WRED type of congestion Avoidance Profile type.
DPT wwpLeosDpTsQCAProfileWREDSimpleTCPGreenMaxDropProbability	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.5	DpTsQWredSimpleMaxDropProbability	read-create	Specifies the maximum drop probability for TCP green frames before hitting the TCP green upper threshold.
INT wwpLeosDpTsQCAProfileWREDSimpleTCPGreenThreshold	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.3	INTEGER	read-create	Specifies the threshold to begin dropping TCP green frames.
INT wwpLeosDpTsQCAProfileWREDSimpleTCPGreenUpperThreshold	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.4	INTEGER	read-create	Specifies the threshold above which all the TCP green frames will be dropped.
DPT wwpLeosDpTsQCAProfileWREDSimpleTCPYellowMaxDropProbability	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.8	DpTsQWredSimpleMaxDropProbability	read-create	Specifies the max drop probability for TCP yellow frames before hitting the TCP yellow upper threshold.
INT wwpLeosDpTsQCAProfileWREDSimpleTCPYellowThreshold	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.6	INTEGER	read-create	Specifies the threshold to begin dropping the TCP yellow frames.
INT wwpLeosDpTsQCAProfileWREDSimpleTCPYellowUpperThreshold	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.7	INTEGER	read-create	Specifies the threshold above which all the TCP yellow frames will be dropped.
INT wwpLeosDpTsQCAProfileWREDSimpleYellowAdmitLimit	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.19	INTEGER	read-create	Specifies queue limit above which yellow frames will be dropped and below which they will not be touched. This should not be confused with the yellow curve above.
INT wwpLeosDpTsQCAProfileWREDSimpleYellowLowerThreshold	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.16	INTEGER	read-create	Specifies the threshold to begin dropping yellow frames.
DPT wwpLeosDpTsQCAProfileWREDSimpleYellowMaxDropProbability	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.18	DpTsQWredSimpleMaxDropProbability	read-create	Specifies the maximum drop probability for yellow frames before hitting the yellow upper threshold.
INT wwpLeosDpTsQCAProfileWREDSimpleYellowUpperThreshold	1.3.6.1.4.1.6141.2.60.500.1.1.1.1.2.1.17	INTEGER	read-create	Specifies the threshold above which all the yellow frames will be dropped.
wwpLeosDpTsQCongestionAvoidanceProfile	1.3.6.1.4.1.6141.2.60.500.1.1.1.1
wwpLeosDpTsQEgressPortQueueGroup	1.3.6.1.4.1.6141.2.60.500.1.1.1.2
U32 wwpLeosDpTsQEgressPortQueueGroupBurstSize	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.1.1.5	Unsigned32	read-write	The burst size associated with the egress port group.
wwpLeosDpTsQEgressPortQueueGroupEntry	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.1.1		not-accessible	An entry (conceptual row) in the wwpLeosDpTsQEgressPortQueueGroupTable.
INT wwpLeosDpTsQEgressPortQueueGroupId	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.1.1.1	INTEGER	not-accessible	Group Id of the egress port queue group. This is the same as the pgid of the port.
wwpLeosDpTsQEgressPortQueueGroupQConfigEntry	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.2.1		not-accessible	An entry (conceptual row) in the wwpLeosDpTsQEgressPortQueueGroupQConfigTable.
wwpLeosDpTsQEgressPortQueueGroupQConfigTable	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.2		not-accessible	The (conceptual) table listing configuration parameters of an egress Queue.
INT wwpLeosDpTsQEgressPortQueueGroupQCount	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.1.1.2	INTEGER	read-only	Number of queues in the egress port group.
wwpLeosDpTsQEgressPortQueueGroupQStatsEntry	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.3.1		not-accessible	An entry (conceptual row) in the wwpLeosDpTsQEgressPortQueueGroupQStatsTable.
wwpLeosDpTsQEgressPortQueueGroupQStatsTable	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.3		not-accessible	The (conceptual) table listing statistics for an egress Queue.
INT wwpLeosDpTsQEgressPortQueueGroupQueueCAPId	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.2.1.2	INTEGER	read-write	The Congestion Avoidance Profile Id associated with the queue.
U32 wwpLeosDpTsQEgressPortQueueGroupQueueCBS	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.2.1.7	Unsigned32	read-write	CBS for the queue.
U32 wwpLeosDpTsQEgressPortQueueGroupQueueCIR	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.2.1.6	Unsigned32	read-write	CIR for the queue.
U32 wwpLeosDpTsQEgressPortQueueGroupQueueEBS	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.2.1.9	Unsigned32	read-write	EBS for the queue.
U32 wwpLeosDpTsQEgressPortQueueGroupQueueEIR	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.2.1.8	Unsigned32	read-write	EIR for the queue.
INT wwpLeosDpTsQEgressPortQueueGroupQueueId	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.2.1.1	INTEGER	not-accessible	The per port per group queue Id.
U32 wwpLeosDpTsQEgressPortQueueGroupQueuePriorityId	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.2.1.3	Unsigned32	read-write	Relative priority id of the queue.
U32 wwpLeosDpTsQEgressPortQueueGroupQueueSchedulerWeight	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.2.1.4	Unsigned32	read-write	Scheduler weight of the queue.
U32 wwpLeosDpTsQEgressPortQueueGroupQueueSize	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.2.1.5	Unsigned32	read-write	Queue size of teh queue.
T/F wwpLeosDpTsQEgressPortQueueGroupQueueStatsClear	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.3.1.6	TruthValue	read-write	When this value is set to true, this queue's stats will be reset to 0. When read, this always returns false
C64 wwpLeosDpTsQEgressPortQueueGroupQueueStatsDroppedBytes	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.3.1.4	Counter64	read-only	Dropped bytes for this queue.
C64 wwpLeosDpTsQEgressPortQueueGroupQueueStatsDroppedPkts	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.3.1.5	Counter64	read-only	Dropped packets for this queue.
C64 wwpLeosDpTsQEgressPortQueueGroupQueueStatsTxBytes	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.3.1.2	Counter64	read-only	Tx bytes for this queue
C64 wwpLeosDpTsQEgressPortQueueGroupQueueStatsTxPkts	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.3.1.3	Counter64	read-only	Tx packets for this queue.
INT wwpLeosDpTsQEgressPortQueueGroupSchedulerAlgorithm	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.1.1.3	INTEGER	read-write	Scheduler Algorithm for the egress port queue.
U32 wwpLeosDpTsQEgressPortQueueGroupShaperBandwidth	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.1.1.4	Unsigned32	read-write	Shaper Bandwidth associated with the egress port group.
INT wwpLeosDpTsQEgressPortQueueGroupStatsQueueId	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.3.1.1	INTEGER	not-accessible	The per port per group queue Id.
wwpLeosDpTsQEgressPortQueueGroupTable	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.1		not-accessible	The (conceptual) table listing configuration parameters of Egress Port Queue.
U32 wwpLeosDpTsQEgressPortQueueGroupWdrrSchedulerGranularity	1.3.6.1.4.1.6141.2.60.500.1.1.1.2.1.1.6	Unsigned32	read-write	The WDRR scheduling granularity in K Bytes
wwpLeosDpTsQRcosToCosQueueMap	1.3.6.1.4.1.6141.2.60.500.1.1.1.3
wwpLeosDpTsQueueMapEntry	1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2.1		not-accessible	An entry (conceptual row) in the wwpLeosDpTsQueueMapTable.
INT wwpLeosDpTsQueueMapId	1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2.1.1	INTEGER	not-accessible	Unique index for the queue map.
STR wwpLeosDpTsQueueMapName	1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2.1.2	DisplayString	read-create	Queue map name.
INT wwpLeosDpTsQueueMapQCount	1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2.1.3	INTEGER	read-create	number of queues associated with the map.
INT wwpLeosDpTsQueueMapRCOS0	1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2.1.4	INTEGER	read-create	The COS queue value for RCOS[0].
INT wwpLeosDpTsQueueMapRCOS1	1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2.1.5	INTEGER	read-create	The COS queue value for RCOS[1].
INT wwpLeosDpTsQueueMapRCOS2	1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2.1.6	INTEGER	read-create	The COS queue value for RCOS[2].
INT wwpLeosDpTsQueueMapRCOS3	1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2.1.7	INTEGER	read-create	The COS queue value for RCOS[3].
INT wwpLeosDpTsQueueMapRCOS4	1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2.1.8	INTEGER	read-create	The COS queue value for RCOS[4].
INT wwpLeosDpTsQueueMapRCOS5	1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2.1.9	INTEGER	read-create	The COS queue value for RCOS[5].
INT wwpLeosDpTsQueueMapRCOS6	1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2.1.10	INTEGER	read-create	The COS queue value for RCOS[6].
INT wwpLeosDpTsQueueMapRCOS7	1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2.1.11	INTEGER	read-create	The COS queue value for RCOS[7].
ROW wwpLeosDpTsQueueMapRowStatus	1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2.1.12	RowStatus	read-create	Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. To delete a row in this table, set this object to 'destroy'.
wwpLeosDpTsQueueMapTable	1.3.6.1.4.1.6141.2.60.500.1.1.1.3.2		not-accessible	The (conceptual) table listing configuration parameters of RCOS to COS Queue mapping.
wwpLeosDpTsQueuing	1.3.6.1.4.1.6141.2.60.500.1.1.1

RFC description

Ciena LEOS dataplane management MIB for packet processors, monitoring traffic shaping and queue statistics.

Start monitoring Ciena/World Wide Packets Metro Ethernet switch (egress queue-group/CoS-mapping/shaping status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WWP-LEOS-DATAPLANE-MIB

What Is WWP-LEOS-DATAPLANE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description