All MIBs › WS-TRAP-MIB › wsTrapEnableDiagMemUsageTooHigh
wsTrapEnableDiagMemUsageTooHigh
Module: WS-TRAP-MIB
OID (symbolic): WS-TRAP-MIB::wsTrapEnableDiagMemUsageTooHigh
OID (numeric): 1.3.6.1.4.1.388.14.5.1.4.40
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: Enable memory use greater than high limit trap.
What is wsTrapEnableDiagMemUsageTooHigh?
Enables or disables the trap fired when memory usage rises above the configured high limit reported in wsTrapDiagMemUsageLimit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.388.14.5.1.4.40 snmpwalk -v2c -c public <target> WS-TRAP-MIB::wsTrapEnableDiagMemUsageTooHigh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.388.14.5.1.4.40.1 snmpget -v2c -c public <target> WS-TRAP-MIB::wsTrapEnableDiagMemUsageTooHigh.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.388.14.5.1.4.40.1 s <value>
Start monitoring Symbol Technologies wireless switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WS-TRAP-MIB::wsTrapEnableDiagMemUsageTooHigh OID value, configure state conditions and alerts, and monitor any Symbol Technologies wireless switches from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.388 | symbol | SYMBOL-DSSS-ENTERPRISE-PRIVATE-MIB |
| 1.3.6.1.4.1.388.14 | ws | WS-SMI |
| 1.3.6.1.4.1.388.14.5 | wsTrap | WS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.388.14.5.1 | wsTrapMIB | WS-TRAP-MIB |
| 1.3.6.1.4.1.388.14.5.1.4 | wsTrapDiag | WS-TRAP-MIB |
| 1.3.6.1.4.1.388.14.5.1.4.40 | wsTrapEnableDiagMemUsageTooHigh | WS-TRAP-MIB |