WS-INFRA-DIAG-MIB

All MIBs › WS-INFRA-DIAG-MIB

Organization: Symbol Technologies

Last Updated: 2006-01-05

Category: Symbol Technologies Wireless

Description: Provides Symbol Technologies wireless infrastructure diagnostic objects for fault isolation and health monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WS-INFRA-DIAG-MIB?

WS-INFRA-DIAG-MIB is a Symbol Technologies enterprise MIB (Symbol was later acquired by Motorola, then Zebra Technologies) providing diagnostic objects for a wireless switch/controller infrastructure, used for fault isolation and health checking. It exposes diagnostic-oriented data such as subsystem test results and error/fault counters intended to help pinpoint the source of a problem within the wireless infrastructure. It supports monitoring hardware and software status by surfacing pass/fail diagnostic outcomes and fault indicators for the switch's internal subsystems, which administrators use to isolate failing components. As one module within Symbol's larger family of WS-* wireless-switch MIBs, it is designed to work alongside sibling modules covering IP, ARP, VPN, and file management rather than standing alone. It is deployed in enterprise wireless LAN environments managed by a Symbol/Motorola wireless switch, where network operations staff use the WS-INFRA-DIAG-MIB MIB's diagnostic objects to troubleshoot AP or switch faults reported through the controller.

IPNetwork Monitor allows you to monitor SNMP objects defined in WS-INFRA-DIAG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Symbol Technologies/Motorola/Zebra wireless switch controller and infrastructure

Monitoring Examples

No concrete object names were supplied for this MIB (the source module description was only a placeholder), so a specific monitoring scenario cannot be honestly detailed beyond its stated diagnostic/fault-isolation purpose. In general use, an admin would expect to poll diagnostic test-result objects for a failed status and cross-reference fault counters to isolate which internal subsystem of the wireless switch is degraded.

What Can Be Monitored

diagnostic test results
subsystem fault/error indicators

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString

From WS-INFRA-SMI-MIB

wsInfraDiag

OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using wsInfraResCpuLoad1 OID:

Select a Symbol Technologies/Motorola/Zebra wireless switch controller and infrastructure (subsystem diagnostic pass/fail status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type wsInfraResCpuLoad1 into the Find box to locate it in the OID tree, then select it and click OK. It reports % of CPU load averaged over 1 min. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if utilization exceeds 85%, a common warning threshold before sustained high load affects performance. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
wsInfraDiagMib	1.3.6.1.4.1.388.14.1.6.1			Description.
wsInfraDiagTempControl	1.3.6.1.4.1.388.14.1.6.1.1
INT wsInfraDiagTempCurrentTemp	1.3.6.1.4.1.388.14.1.6.1.1.1	INTEGER	read-only	current temperature of the temperature sensor, if there is no temp sensor, it will return 1000.
INT wsInfraDiagTempHighTemp	1.3.6.1.4.1.388.14.1.6.1.1.2	INTEGER	read-write	high temperature of the temperature sensor, if there is no temp sensor, it will return 1000 The user could only set the temp from 0 to 450.
INT wsInfraDiagTempHighTempHysteresis	1.3.6.1.4.1.388.14.1.6.1.1.3	INTEGER	read-write	high temperature hysteresis of the temperature sensor. If there is no temp sensor, it will return 0. the user could only set the high temperature hysteresis 1-100.
wsInfraDiagFanControl	1.3.6.1.4.1.388.14.1.6.1.2
INT wsInfraDiagSysFanSpeed	1.3.6.1.4.1.388.14.1.6.1.2.1	INTEGER	read-only	system fan speed
INT wsDiagProcFanSpeed	1.3.6.1.4.1.388.14.1.6.1.2.2	INTEGER	read-only	processor fan speed
wsInfraHwBuildInfo	1.3.6.1.4.1.388.14.1.6.1.3
INT wsInfraHwTotalNum	1.3.6.1.4.1.388.14.1.6.1.3.1	INTEGER	read-only	total hardware number in the system
wsInfraHwBuildInfoTable	1.3.6.1.4.1.388.14.1.6.1.3.2		not-accessible	Shows the system hardware configuration
wsInfraHwBuildInfoEntry	1.3.6.1.4.1.388.14.1.6.1.3.2.1		not-accessible	Description.
INT wsInfraHwBuildInfoModuleIndex	1.3.6.1.4.1.388.14.1.6.1.3.2.1.1	INTEGER	not-accessible	hardware module index
STR wsInfraHwBuildInfoModuleName	1.3.6.1.4.1.388.14.1.6.1.3.2.1.2	DisplayString	read-only	Name of the hardware module
STR wsInfraHwBuildInfoVersion	1.3.6.1.4.1.388.14.1.6.1.3.2.1.3	DisplayString	read-only	Version of the hardware module
STR wsInfraHwBuildInfoManufacturer	1.3.6.1.4.1.388.14.1.6.1.3.2.1.4	DisplayString	read-only	Name of the hardware component manufacturer
STR wsInfraHwBuildInfoDesc	1.3.6.1.4.1.388.14.1.6.1.3.2.1.5	DisplayString	read-only	Description of the device/hardware component
wsInfraResStats	1.3.6.1.4.1.388.14.1.6.1.4
INT wsInfraResCpuLoad1Ex	1.3.6.1.4.1.388.14.1.6.1.4.1	INTEGER	read-only	% of CPU load averaged over 1 min. Precision is to the degree of 0.1 %
INT wsInfraResCpuLoad5	1.3.6.1.4.1.388.14.1.6.1.4.2	INTEGER	read-only	% of CPU load averaged over 5 mins. Precision is to the degree of 0.1 %
INT wsInfraResCpuLoad15	1.3.6.1.4.1.388.14.1.6.1.4.3	INTEGER	read-only	% of CPU load averaged over 15 mins. Precision is to the degree of 0.1 %
U32 wsInfraFreeMemory	1.3.6.1.4.1.388.14.1.6.1.4.4	Unsigned32	read-only	Amount of free memory available in the system in KB
U32 wsInfraRootFSFree	1.3.6.1.4.1.388.14.1.6.1.4.5	Unsigned32	read-only	Amount of free space available on root file system in KB
U32 wsInfraRootFSInodesFree	1.3.6.1.4.1.388.14.1.6.1.4.6	Unsigned32	read-only	free Inodes available on root file system
U32 wsInfraRamFSFree	1.3.6.1.4.1.388.14.1.6.1.4.7	Unsigned32	read-only	Free space available on RAM file system
U32 wsInfraRamFSInodesFree	1.3.6.1.4.1.388.14.1.6.1.4.8	Unsigned32	read-only	free Inodes available on RAM file system
U32 wsInfraFreeFileDesc	1.3.6.1.4.1.388.14.1.6.1.4.9	Unsigned32	read-only	Number of free file descriptor
U32 wsInfraUsedKernBuff32	1.3.6.1.4.1.388.14.1.6.1.4.10	Unsigned32	read-only	Number of 32 byte kernel buffers used
U32 wsInfraUsedKernBuff64	1.3.6.1.4.1.388.14.1.6.1.4.11	Unsigned32	read-only	Number of 64 byte kernel buffers used
U32 wsInfraUsedKernBuff128	1.3.6.1.4.1.388.14.1.6.1.4.12	Unsigned32	read-only	Number of 128 byte kernel buffers used
U32 wsInfraUsedKernBuff256	1.3.6.1.4.1.388.14.1.6.1.4.13	Unsigned32	read-only	Number of 256 byte kernel buffers used
U32 wsInfraUsedKernBuff512	1.3.6.1.4.1.388.14.1.6.1.4.14	Unsigned32	read-only	Number of 512 byte kernel buffers used
U32 wsInfraUsedKernBuff1024	1.3.6.1.4.1.388.14.1.6.1.4.15	Unsigned32	read-only	Number of 1024 byte kernel buffers used
U32 wsInfraUsedKernBuff2048	1.3.6.1.4.1.388.14.1.6.1.4.16	Unsigned32	read-write	Number of 2048 byte kernel buffers used
U32 wsInfraUsedKernBuff4096	1.3.6.1.4.1.388.14.1.6.1.4.17	Unsigned32	read-only	Number of 4096 byte kernel buffers used
U32 wsInfraUsedKernBuff8192	1.3.6.1.4.1.388.14.1.6.1.4.18	Unsigned32	read-only	Number of 8192 byte kernel buffers used
U32 wsInfraUsedKernBuff16384	1.3.6.1.4.1.388.14.1.6.1.4.19	Unsigned32	read-only	Number of 16384 byte kernel buffers used
U32 wsInfraUsedKernBuff32768	1.3.6.1.4.1.388.14.1.6.1.4.20	Unsigned32	read-only	Number of 32768 byte kernel buffers used
U32 wsInfraUsedKernBuff65536	1.3.6.1.4.1.388.14.1.6.1.4.21	Unsigned32	read-only	Number of 65536 byte kernel buffers used
U32 wsInfraUsedKernBuff131072	1.3.6.1.4.1.388.14.1.6.1.4.22	Unsigned32	read-only	Number of 131072 byte kernel buffers used
INT wsInfraResCpuLoad1MinLimit	1.3.6.1.4.1.388.14.1.6.1.4.23	INTEGER	read-write	Limit on CPU load averaged over 1 minute
I32 wsInfraResCpuLoad5MinLimit	1.3.6.1.4.1.388.14.1.6.1.4.24	Integer32	read-write	Limit on CPU load averaged over 5 minutes
I32 wsInfraResCpuLoad15MinLimit	1.3.6.1.4.1.388.14.1.6.1.4.25	Integer32	read-write	Limit on CPU load averaged over 15 minutes
INT wsInfraUsedKernBuff32Limit	1.3.6.1.4.1.388.14.1.6.1.4.26	INTEGER	read-write	32 byte buffer usage warning limit
INT wsInfraUsedKernBuff64Limit	1.3.6.1.4.1.388.14.1.6.1.4.27	INTEGER	read-write	64 byte buffer usage warning limit
INT wsInfraUsedKernBuff128Limit	1.3.6.1.4.1.388.14.1.6.1.4.28	INTEGER	read-write	128 byte buffer usage warning limit
INT wsInfraUsedKernBuff256Limit	1.3.6.1.4.1.388.14.1.6.1.4.29	INTEGER	read-write	256 byte buffer usage warning limit
INT wsInfraUsedKernBuff512Limit	1.3.6.1.4.1.388.14.1.6.1.4.30	INTEGER	read-write	512 byte buffer usage warning limit
INT wsInfraUsedKernBuff1024Limit	1.3.6.1.4.1.388.14.1.6.1.4.31	INTEGER	read-write	1024 byte buffer usage warning limit
INT wsInfraUsedKernBuff2048Limit	1.3.6.1.4.1.388.14.1.6.1.4.32	INTEGER	read-only	2048 byte buffer usage warning limit
INT wsInfraUsedKernBuff4096Limit	1.3.6.1.4.1.388.14.1.6.1.4.33	INTEGER	read-write	4096 byte buffer usage warning limit
INT wsInfraUsedKernBuff8192Limit	1.3.6.1.4.1.388.14.1.6.1.4.34	INTEGER	read-write	8192 byte buffer usage warning limit
INT wsInfraUsedKernBuff16384Limit	1.3.6.1.4.1.388.14.1.6.1.4.35	INTEGER	read-write	16384 byte buffer usage warning limit
INT wsInfraUsedKernBuff32768Limit	1.3.6.1.4.1.388.14.1.6.1.4.36	INTEGER	read-write	32768 byte buffer usage warning limit
INT wsInfraUsedKernBuff65536Limit	1.3.6.1.4.1.388.14.1.6.1.4.37	INTEGER	read-write	65536 byte buffer usage warning limit
INT wsInfraUsedKernBuff131072Limit	1.3.6.1.4.1.388.14.1.6.1.4.38	INTEGER	read-write	131072 byte buffer usage warning limit
INT wsInfraDiagControl	1.3.6.1.4.1.388.14.1.6.1.6	INTEGER	read-write	Used to enable/disable in service diagnostics
INT wsInfraDiagPeriod	1.3.6.1.4.1.388.14.1.6.1.7	INTEGER	read-write	Period of in service diagnostics in ms
INT wsInfraDiagFanNum	1.3.6.1.4.1.388.14.1.6.1.8	INTEGER	read-only	Total number of fans in the system
INT wsInfraDiagTempSensorNum	1.3.6.1.4.1.388.14.1.6.1.9	INTEGER	read-only	Total number of temperature sensors in the system
STR wsInfraDiagPlatform	1.3.6.1.4.1.388.14.1.6.1.10	DisplayString	read-only	Name of the hardware platform of the switch
wsInfraDiagMonitoredFSTable	1.3.6.1.4.1.388.14.1.6.1.11		not-accessible	Table of monitored file systems like flash, etc and var.
wsInfraDiagMonitoredFSEntry	1.3.6.1.4.1.388.14.1.6.1.11.1		not-accessible	Description.
U32 wsInfraDiagMonitoredFSTableIndex	1.3.6.1.4.1.388.14.1.6.1.11.1.1	Unsigned32	not-accessible	Simple Index.
STR wsInfraDiagMonitoredFSName	1.3.6.1.4.1.388.14.1.6.1.11.1.2	DisplayString	read-only	Name of the monitored File System.
U32 wsInfraDiagMonitoredFSFreeSpace	1.3.6.1.4.1.388.14.1.6.1.11.1.3	Unsigned32	read-only	Free space currently available in monitored File System.
I32 wsInfraDiagMonitoredFSFreeSpacePercent	1.3.6.1.4.1.388.14.1.6.1.11.1.4	Integer32	read-only	Description.
INT wsInfraDiagMonitoredFSFreeSpaceLimit	1.3.6.1.4.1.388.14.1.6.1.11.1.5	INTEGER	read-write	Threshold value for free space available in the monitored File System. If the free space available falls below this value, a notification should get sent out.
I32 wsInfraDiagMonitoredFSSize	1.3.6.1.4.1.388.14.1.6.1.11.1.6	Integer32	read-only	Size of monitored File System.
I32 wsInfraDiagMonitoredFSUsed	1.3.6.1.4.1.388.14.1.6.1.11.1.7	Integer32	read-only	Amount of monitored File System space used.
I32 wsInfraDiagMonitoredFSINodesFree	1.3.6.1.4.1.388.14.1.6.1.11.1.8	Integer32	read-only	Number of free INodes in monitored File System.
INT wsInfraDiagMonitoredFSINodesLimit	1.3.6.1.4.1.388.14.1.6.1.11.1.9	INTEGER	read-write	Limit of INodes in monitored File System in %. Precision is to the degree of 0.1%.
wsInfraDiagTempTable	1.3.6.1.4.1.388.14.1.6.1.12		not-accessible	Description.
wsInfraDiagTempEntry	1.3.6.1.4.1.388.14.1.6.1.12.1		not-accessible	Description.
INT wsInfraDiagTempIndex	1.3.6.1.4.1.388.14.1.6.1.12.1.1	INTEGER	accessible-for-notify	Simple Index.
STR wsInfraDiagTempSensorName	1.3.6.1.4.1.388.14.1.6.1.12.1.2	DisplayString	read-only	Name of temperature sensor. Gives an indication of the location of the sensor on the system.
I32 wsInfraDiagTempCurrTemp	1.3.6.1.4.1.388.14.1.6.1.12.1.3	Integer32	read-only	Current temperature measured by the sensor.
INT wsInfraDiagTempMaxTemp	1.3.6.1.4.1.388.14.1.6.1.12.1.4	INTEGER	read-write	Upper limit of temperature measured by the sensor. Send out a notification if this is reached.
INT wsInfraDiagTempOverTemp	1.3.6.1.4.1.388.14.1.6.1.12.1.5	INTEGER	read-write	Over limit of temperature measured by the sensor. Send out a notification if temp gets above this value.
wsInfraDiagFanTable	1.3.6.1.4.1.388.14.1.6.1.13		not-accessible	Description.
wsInfraDiagFanEntry	1.3.6.1.4.1.388.14.1.6.1.13.1		not-accessible	Description.
INT wsInfraDiagFanIndex	1.3.6.1.4.1.388.14.1.6.1.13.1.1	INTEGER	accessible-for-notify	Simple Index.
STR wsInfraDiagFanName	1.3.6.1.4.1.388.14.1.6.1.13.1.2	DisplayString	read-only	Name of fan. Gives an indication of the location of the fan on the system.
INT wsInfraDiagFanSpeed	1.3.6.1.4.1.388.14.1.6.1.13.1.3	INTEGER	read-only	Speed of fan in rpm
INT wsInfraDiagFanLowSpeedLimit	1.3.6.1.4.1.388.14.1.6.1.13.1.4	INTEGER	read-write	Low speed limit of fan. Send out a notification if speed gets to, or below this value.
wsInfraDiagProcTable	1.3.6.1.4.1.388.14.1.6.1.14		not-accessible	Table of top 10 processes.
wsInfraDiagProcEntry	1.3.6.1.4.1.388.14.1.6.1.14.1		not-accessible	Description.
INT wsInfraDiagProcIndex	1.3.6.1.4.1.388.14.1.6.1.14.1.1	INTEGER	accessible-for-notify	Simple index
STR wsInfraDiagProcName	1.3.6.1.4.1.388.14.1.6.1.14.1.2	DisplayString	read-only	Name of proc
INT wsInfraDiagProcPercentCPU	1.3.6.1.4.1.388.14.1.6.1.14.1.3	INTEGER	read-only	% of CPU used by proc.
INT wsInfraDiagProcPercentMem	1.3.6.1.4.1.388.14.1.6.1.14.1.4	INTEGER	read-only	% of memory used by proc.
wsInfraDiagRamStats	1.3.6.1.4.1.388.14.1.6.1.15
I32 wsInfraDiagRamStatsTotal	1.3.6.1.4.1.388.14.1.6.1.15.1	Integer32	read-only	Total RAM available in the system
I32 wsInfraDiagRamStatsUsed	1.3.6.1.4.1.388.14.1.6.1.15.2	Integer32	read-only	Total RAM used in the system
I32 wsInfraDiagRamStatsFree	1.3.6.1.4.1.388.14.1.6.1.15.3	Integer32	read-only	Total RAM not used in the system
INT wsInfraDiagRamStatsPercentFree	1.3.6.1.4.1.388.14.1.6.1.15.4	INTEGER	read-only	% of free RAM in system
INT wsInfraDiagRamStatsPercentFreeLimit	1.3.6.1.4.1.388.14.1.6.1.15.5	INTEGER	read-write	Limit of free RAM in system in %.
wsInfraDiagPktBuffStats	1.3.6.1.4.1.388.14.1.6.1.17
I32 wsInfraDiagPktBuffAlloc	1.3.6.1.4.1.388.14.1.6.1.17.1	Integer32	read-only	Amount of allocated packet buffer in system.
I32 wsInfraDiagPktBuffUsed	1.3.6.1.4.1.388.14.1.6.1.17.2	Integer32	read-only	Amount of used packet buffer in system.
INT wsInfraDiagPktBuffMax	1.3.6.1.4.1.388.14.1.6.1.17.3	INTEGER	read-write	Limit on maximum of allocated packet buffer in system.
wsInfraDiagIpRouteCacheStats	1.3.6.1.4.1.388.14.1.6.1.18
I32 wsInfraDiagIpRouteCacheAlloc	1.3.6.1.4.1.388.14.1.6.1.18.1	Integer32	read-only	Amount of allocated IP route cache in system.
I32 wsInfraDiagIpRouteCacheUsed	1.3.6.1.4.1.388.14.1.6.1.18.2	Integer32	read-only	Amount of used IP route cache in system.
INT wsInfraDiagIpRouteCacheMax	1.3.6.1.4.1.388.14.1.6.1.18.3	INTEGER	read-write	Max limit of allocated IP route cache in system.
wsInfraDiagFileDescStats	1.3.6.1.4.1.388.14.1.6.1.19
I32 wsInfraDiagFileDescInUse	1.3.6.1.4.1.388.14.1.6.1.19.1	Integer32	read-only	Number of file descriptors in use.
I32 wsInfraDiagFileDescHWM	1.3.6.1.4.1.388.14.1.6.1.19.2	Integer32	read-only	Description.
INT wsInfraDiagFileDescLimit	1.3.6.1.4.1.388.14.1.6.1.19.3	INTEGER	read-write	Limit of file descriptors.
I32 wsInfraDiagProcNum	1.3.6.1.4.1.388.14.1.6.1.20	Integer32	read-only	Number of procs currently running in the system
INT wsInfraDiagProcMemLimit	1.3.6.1.4.1.388.14.1.6.1.21	INTEGER	read-write	Memory limit on processes running in the system.
wsInfraDiagMIBConformance	1.3.6.1.4.1.388.14.1.6.1.100
wsInfraDiagMIBCompliances	1.3.6.1.4.1.388.14.1.6.1.100.1
wsInfraDiagMIBCompliance	1.3.6.1.4.1.388.14.1.6.1.100.1.1			diag MIB compliance
wsInfraDiagMIBGroups	1.3.6.1.4.1.388.14.1.6.1.100.2
wsInfraMIBDiagGroup	1.3.6.1.4.1.388.14.1.6.1.100.2.1			diag MIB group
wsInfraMIBDiagObsoleteGroup	1.3.6.1.4.1.388.14.1.6.1.100.2.2			Description.

RFC description

Symbol wireless access point infrastructure diagnostics MIB for temperature monitoring and device health status.

Start monitoring Symbol Technologies/Motorola/Zebra wireless switch controller and infrastructure (subsystem diagnostic pass/fail status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WS-INFRA-DIAG-MIB