WS-MGMT-MIB

All MIBs › WS-MGMT-MIB

Organization: Symbol Technologies

Last Updated: 2007-01-26

Category: Symbol Technologies Wireless

Description: Provides Symbol Technologies wireless switch management objects for system control and operational monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WS-MGMT-MIB?

WS-MGMT-MIB is Symbol Technologies' proprietary MIB for system control and operational monitoring of its wireless LAN switch products (Symbol was later acquired by Motorola and then Zebra Technologies). Beyond its name and a placeholder module description, the source provides no object list, so its exposed data categories cannot be independently confirmed and are inferred from its stated purpose as general system management/control for a wireless switch. Its likely relevance to status monitoring is general operational-state tracking of the wireless switch controller itself, in the same vein as a standard system group, though no specific uptime, CPU, or environmental objects can be verified from the source. It likely complements standard wireless/IEEE 802.11 MIBs and the base SNMPv2 system group rather than replacing them. It was deployed on Symbol Technologies wireless LAN switch controllers in enterprise WLAN deployments. Engineers can download the WS-MGMT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WS-MGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Symbol Technologies wireless LAN switch controller

Monitoring Examples

No sample objects were provided for this module and the module description is only a placeholder, so no concrete polling scenario with real object names can be constructed honestly; based on the MIB's name and short description, it would be used for general system control and operational status of the wireless switch controller.

What Can Be Monitored

general system operational status
wireless switch control state

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
PhysAddress
RowStatus
TruthValue

From WS-SMI

wsMgmt

OBJECT-IDENTITY

From WS-TYPE-MIB

DoActionNow

OIDs

OID symbolic	OID numeric	Type	Access	Description
wsMgmtMib	1.3.6.1.4.1.388.14.4.1			Description.
wsMgmtReset	1.3.6.1.4.1.388.14.4.1.1
INT wsMgmtSystemReset	1.3.6.1.4.1.388.14.4.1.1.1	INTEGER	read-write	Description.
DOA wsMgmtSystemFactoryDefaultCfg	1.3.6.1.4.1.388.14.4.1.1.2	DoActionNow	read-write	Description.
wsMgmtSnmp	1.3.6.1.4.1.388.14.4.1.2
T/F wsMgmtSnmpV2Switch	1.3.6.1.4.1.388.14.4.1.2.1	TruthValue	read-write	Description.
T/F wsMgmtSnmpV3Switch	1.3.6.1.4.1.388.14.4.1.2.2	TruthValue	read-write	Description.
wsMgmtHttp	1.3.6.1.4.1.388.14.4.1.3
T/F wsMgmtHttpEnable	1.3.6.1.4.1.388.14.4.1.3.1	TruthValue	read-write	Description.
T/F wsMgmtHttpsEnable	1.3.6.1.4.1.388.14.4.1.3.2	TruthValue	read-write	Description.
STR wsMgmtHttpTrustpoint	1.3.6.1.4.1.388.14.4.1.3.3	DisplayString	read-write	Name of certificate used to secure the https session. If defined, the length must be between 2 and 64 characters. If null, no certificate is defined.
wsMgmtAlarms	1.3.6.1.4.1.388.14.4.1.4
wsMgmtAlarmTable	1.3.6.1.4.1.388.14.4.1.4.1		not-accessible	Description.
wsMgmtAlarmEntry	1.3.6.1.4.1.388.14.4.1.4.1.1		not-accessible	Description.
U32 wsMgmtAlarmIndex	1.3.6.1.4.1.388.14.4.1.4.1.1.1	Unsigned32	read-only	Simple index.
INT wsMgmtAlarmSeverity	1.3.6.1.4.1.388.14.4.1.4.1.1.2	INTEGER	read-only	Alarm severity.
U32 wsMgmtAlarmTypeID	1.3.6.1.4.1.388.14.4.1.4.1.1.3	Unsigned32	read-only	Alarm Type ID.
STR wsMgmtAlarmTypeName	1.3.6.1.4.1.388.14.4.1.4.1.1.4	DisplayString	read-only	Alarm name.
DAT wsMgmtAlarmTimestamp	1.3.6.1.4.1.388.14.4.1.4.1.1.5	DateAndTime	read-only	Alarm timestamp.
STR wsMgmtAlarmMessage	1.3.6.1.4.1.388.14.4.1.4.1.1.6	DisplayString	read-only	Detailed description of the alarm .
STR wsMgmtModuleName	1.3.6.1.4.1.388.14.4.1.4.1.1.7	DisplayString	read-only	Name of the module which raised this alarm.
INT wsMgmtAlarmStatus	1.3.6.1.4.1.388.14.4.1.4.1.1.8	INTEGER	read-write	Status of this Alarm.
INT wsMgmtAlarmRowStatus	1.3.6.1.4.1.388.14.4.1.4.1.1.9	INTEGER	read-write	Setting this column permanently deletes the row from Alarm Log.
DOA wsMgmtClearAllAlarms	1.3.6.1.4.1.388.14.4.1.4.2	DoActionNow	read-write	Deletes all the rows from Alarm Table.
DOA wsMgmtAcknowledgeAllAlarms	1.3.6.1.4.1.388.14.4.1.4.3	DoActionNow	read-write	Acknowledges all the alarms.
U32 wsMgmtNewAlarmsCount	1.3.6.1.4.1.388.14.4.1.4.4	Unsigned32	read-only	Number of new/unacknowledged currently active alarms.
U32 wsMgmtTotalAlarmsCount	1.3.6.1.4.1.388.14.4.1.4.5	Unsigned32	read-only	Total number of currently active alarms.
U32 wsMgmtTotalAlarmsCountSinceBoot	1.3.6.1.4.1.388.14.4.1.4.6	Unsigned32	read-only	Total number of alarms that have been generated since system boot. This number could be different from wsMgmtTotalAlarmsCount, in cases where alarms get deleted from alarm log either manually or during alarm-log rollover.
U32 wsMgmtAlarmsIndexLow	1.3.6.1.4.1.388.14.4.1.4.7	Unsigned32	read-only	The index of the oldest currently active alarm in the alarm log.
U32 wsMgmtAlarmsIndexHigh	1.3.6.1.4.1.388.14.4.1.4.8	Unsigned32	read-only	The index of the newest currently active alarm in the alarm log.
U32 wsMgmCriticalAlarmsCount	1.3.6.1.4.1.388.14.4.1.4.9	Unsigned32	read-only	Total number of currently active alarms of critical severity.
U32 wsMgmMajorAlarmsCount	1.3.6.1.4.1.388.14.4.1.4.10	Unsigned32	read-only	Total number of currently active alarms of major severity.
U32 wsMgmWarningAlarmsCount	1.3.6.1.4.1.388.14.4.1.4.11	Unsigned32	read-only	Total number of currently active alarms of warning severity.
U32 wsMgmInfoAlarmsCount	1.3.6.1.4.1.388.14.4.1.4.12	Unsigned32	read-only	Total number of currently active alarms of informational severity.
U32 wsMgmNormalAlarmsCount	1.3.6.1.4.1.388.14.4.1.4.13	Unsigned32	read-only	Total number of currently active alarms of normal severity.
U32 wsMgmUnacknowledgedCriticalAlarmsCount	1.3.6.1.4.1.388.14.4.1.4.14	Unsigned32	read-only	Total number of current unacknowledged alarms with severity 'critical'.
U32 wsMgmUnacknowledgedMajorAlarmsCount	1.3.6.1.4.1.388.14.4.1.4.15	Unsigned32	read-only	Total number of current unacknowledged alarms with severity 'major'.
U32 wsMgmUnacknowledgedWarningAlarmsCount	1.3.6.1.4.1.388.14.4.1.4.16	Unsigned32	read-only	Total number of current unacknowledged alarms with severity 'warning'.
U32 wsMgmUnacknowledgedInfoAlarmsCount	1.3.6.1.4.1.388.14.4.1.4.17	Unsigned32	read-only	Total number of current unacknowledged alarms with severity 'informational'.
U32 wsMgmUnacknowledgedNormalAlarmsCount	1.3.6.1.4.1.388.14.4.1.4.18	Unsigned32	read-only	Total number of current unacknowledged alarms with severity 'normal'.
U32 wsMgmUnacknowledgedCriticalAlarmsCountSinceBoot	1.3.6.1.4.1.388.14.4.1.4.19	Unsigned32	read-only	Total number of unacknowledged alarms with severity 'critical' that have been generated since system boot. This number could be different from the current number of unacknowledged alarms with severity 'critical' in cases where alarms get deleted from alarm log either manually or during alarm-log rollover.
U32 wsMgmUnacknowledgedMajorAlarmsCountSinceBoot	1.3.6.1.4.1.388.14.4.1.4.20	Unsigned32	read-only	Total number of unacknowledged alarms with severity 'major' that have been generated since system boot. This number could be different from the current number of unacknowledged alarms with severity 'major in cases where alarms get deleted from alarm log either manually or during alarm-log rollover.
U32 wsMgmUnacknowledgedWarningAlarmsCountSinceBoot	1.3.6.1.4.1.388.14.4.1.4.21	Unsigned32	read-only	Total number of unacknowledged alarms with severity 'warning' that have been generated since system boot. This number could be different from the current number of unacknowledged alarms with severity 'warning' in cases where alarms get deleted from alarm log either manually or during alarm-log rollover.
U32 wsMgmUnacknowledgedInfoAlarmsCountSinceBoot	1.3.6.1.4.1.388.14.4.1.4.22	Unsigned32	read-only	Total number of unacknowledged alarms with severity 'informational' that have been generated since system boot. This number could be different from the current number of unacknowledged alarms with severity 'informational' in cases where alarms get deleted from alarm log either manually or during alarm-log rollover.
U32 wsMgmUnacknowledgedNormalAlarmsCountSinceBoot	1.3.6.1.4.1.388.14.4.1.4.23	Unsigned32	read-only	Total number of unacknowledged alarms with severity 'normal' that have been generated since system boot. This number could be different from the current number of unacknowledged alarms with severity 'normal' in cases where alarms get deleted from alarm log either manually or during alarm-log rollover.
wsMgmtCert	1.3.6.1.4.1.388.14.4.1.5
wsMgmtCertCurrent	1.3.6.1.4.1.388.14.4.1.5.2
STR wsMgmtCertCurrentCountry	1.3.6.1.4.1.388.14.4.1.5.2.1	DisplayString	read-only	Description.
STR wsMgmtCertCurrentState	1.3.6.1.4.1.388.14.4.1.5.2.2	DisplayString	read-only	Description.
STR wsMgmtCertCurrentCity	1.3.6.1.4.1.388.14.4.1.5.2.3	DisplayString	read-only	Description.
STR wsMgmtCertCurrentOrg	1.3.6.1.4.1.388.14.4.1.5.2.4	DisplayString	read-only	Description.
STR wsMgmtCertCurrentOrgUnit	1.3.6.1.4.1.388.14.4.1.5.2.6	DisplayString	read-only	Description.
STR wsMgmtCertCurrentCommonName	1.3.6.1.4.1.388.14.4.1.5.2.7	DisplayString	read-only	Description.
OCT wsMgmtCertCurrentIssuer	1.3.6.1.4.1.388.14.4.1.5.2.8	OCTET STRING	read-only	Description.
STR wsMgmtCertCurrentValidStart	1.3.6.1.4.1.388.14.4.1.5.2.9	DisplayString	read-only	Description.
STR wsMgmtCertCurrentValidEnd	1.3.6.1.4.1.388.14.4.1.5.2.10	DisplayString	read-only	Description.
STR wsMgmtCertCurrentTrustPoint	1.3.6.1.4.1.388.14.4.1.5.2.11	DisplayString	read-only	trust point of the current cert, will always get local in rel1.0
wsMgmtCertCreate	1.3.6.1.4.1.388.14.4.1.5.3
STR wsMgmtCertFileName	1.3.6.1.4.1.388.14.4.1.5.3.2	DisplayString	read-write	Description.
INT wsMgmtCertAction	1.3.6.1.4.1.388.14.4.1.5.3.3	INTEGER	read-write	Description.
STR wsMgmtCertStatus	1.3.6.1.4.1.388.14.4.1.5.3.4	DisplayString	read-only	Description.
STR wsMgmtCertCountry	1.3.6.1.4.1.388.14.4.1.5.3.5	DisplayString	read-write	Description.
STR wsMgmtCertState	1.3.6.1.4.1.388.14.4.1.5.3.6	DisplayString	read-write	Description.
STR wsMgmtCertCity	1.3.6.1.4.1.388.14.4.1.5.3.7	DisplayString	read-write	Description.
STR wsMgmtCertOrg	1.3.6.1.4.1.388.14.4.1.5.3.8	DisplayString	read-write	Description.
STR wsMgmtCertOrgUnit	1.3.6.1.4.1.388.14.4.1.5.3.9	DisplayString	read-write	Description.
STR wsMgmtCertCommonName	1.3.6.1.4.1.388.14.4.1.5.3.10	DisplayString	read-write	Description.
STR wsMgmtCertIssuer	1.3.6.1.4.1.388.14.4.1.5.3.11	DisplayString	read-write	Description.
STR wsMgmtCertEmail	1.3.6.1.4.1.388.14.4.1.5.3.12	DisplayString	read-write	Description.
STR wsMgmtCertPwd	1.3.6.1.4.1.388.14.4.1.5.3.13	DisplayString	read-write	Description.
STR wsMgmtCertCompany	1.3.6.1.4.1.388.14.4.1.5.3.14	DisplayString	read-write	Description.
STR wsMgmtCertValidStart	1.3.6.1.4.1.388.14.4.1.5.3.15	DisplayString	read-only	Description.
STR wsMgmtCertValidEnd	1.3.6.1.4.1.388.14.4.1.5.3.16	DisplayString	read-only	Description.
STR wsMgmtCertTrustPoint	1.3.6.1.4.1.388.14.4.1.5.3.17	DisplayString	read-write	trust point of the cert, will only accept local in rel 1.0
wsMgmtCertViewTable	1.3.6.1.4.1.388.14.4.1.5.4		not-accessible	Shows a list of all enrolled certificates.
wsMgmtCertViewEntry	1.3.6.1.4.1.388.14.4.1.5.4.1		not-accessible	Description.
STR wsMgmtCertViewTrustpoint	1.3.6.1.4.1.388.14.4.1.5.4.1.1	DisplayString	read-only	Name of the trustpoint
INT wsMgmtCertViewType	1.3.6.1.4.1.388.14.4.1.5.4.1.2	INTEGER	read-only	Type of certificate: CA certificate or server certificate.
STR wsMgmtCertViewSubjectCommonName	1.3.6.1.4.1.388.14.4.1.5.4.1.3	DisplayString	read-only	Contains 6 fields corresponding to Common Name, Organizational unit, Organization, Location, State and Country
STR wsMgmtCertViewSubjectOrgUnit	1.3.6.1.4.1.388.14.4.1.5.4.1.4	DisplayString	read-only	Description.
STR wsMgmtCertViewSubjectOrg	1.3.6.1.4.1.388.14.4.1.5.4.1.5	DisplayString	read-only	Description.
STR wsMgmtCertViewSubjectCity	1.3.6.1.4.1.388.14.4.1.5.4.1.6	DisplayString	read-only	Description.
STR wsMgmtCertViewSubjectState	1.3.6.1.4.1.388.14.4.1.5.4.1.7	DisplayString	read-only	Description.
STR wsMgmtCertViewSubjectCountry	1.3.6.1.4.1.388.14.4.1.5.4.1.8	DisplayString	read-only	Description.
STR wsMgmtCertViewSubjectEmail	1.3.6.1.4.1.388.14.4.1.5.4.1.9	DisplayString	read-only	Description.
STR wsMgmtCertViewIssuerCommonName	1.3.6.1.4.1.388.14.4.1.5.4.1.10	DisplayString	read-only	Name of authority who issues the certficate
STR wsMgmtCertViewIssuerOrgUnit	1.3.6.1.4.1.388.14.4.1.5.4.1.11	DisplayString	read-only	Description.
STR wsMgmtCertViewIssuerOrg	1.3.6.1.4.1.388.14.4.1.5.4.1.12	DisplayString	read-only	Description.
STR wsMgmtCertViewIssuerCity	1.3.6.1.4.1.388.14.4.1.5.4.1.13	DisplayString	read-only	Description.
STR wsMgmtCertViewIssuerState	1.3.6.1.4.1.388.14.4.1.5.4.1.14	DisplayString	read-only	Description.
STR wsMgmtCertViewIssuerCountry	1.3.6.1.4.1.388.14.4.1.5.4.1.15	DisplayString	read-only	Description.
STR wsMgmtCertViewIssuerEmail	1.3.6.1.4.1.388.14.4.1.5.4.1.16	DisplayString	read-only	Description.
STR wsMgmtCertViewValidStart	1.3.6.1.4.1.388.14.4.1.5.4.1.17	DisplayString	read-only	Date on which the certificate starts to be valid
STR wsMgmtCertViewValidEnd	1.3.6.1.4.1.388.14.4.1.5.4.1.18	DisplayString	read-only	Date of expiry of the certificate
wsMgmtCertConfigTable	1.3.6.1.4.1.388.14.4.1.5.5		not-accessible	Table in which trustpoints can be configured
wsMgmtCertConfigEntry	1.3.6.1.4.1.388.14.4.1.5.5.1		not-accessible	Description.
STR wsMgmtCertConfigTrustpoint	1.3.6.1.4.1.388.14.4.1.5.5.1.1	DisplayString	read-create	Name of the trustpoint
STR wsMgmtCertConfigKey	1.3.6.1.4.1.388.14.4.1.5.5.1.2	DisplayString	read-create	Label of the RSA keypair associated with the certificate.
STR wsMgmtCertConfigCommonName	1.3.6.1.4.1.388.14.4.1.5.5.1.3	DisplayString	read-create	Common name of the trustpoint specified in the Subject Alternative Name extension of the certificate request /selfsigned certificate
STR wsMgmtCertConfigOrgUnit	1.3.6.1.4.1.388.14.4.1.5.5.1.4	DisplayString	read-create	Organizational unit to which the certificate belongs specified in the Subject Alternative Name extension of the certificate request/selfsigned certificate
STR wsMgmtCertConfigOrg	1.3.6.1.4.1.388.14.4.1.5.5.1.5	DisplayString	read-create	Organizational to which the certificate belongs specified in the Subject Alternative Name extension of the certificate request /selfsigned certificate
STR wsMgmtCertConfigCompany	1.3.6.1.4.1.388.14.4.1.5.5.1.6	DisplayString	read-create	Company to which the certificate is issued to specified in the Subject Alternative Name extension of the certificate request /selfsigned certificate
STR wsMgmtCertConfigCity	1.3.6.1.4.1.388.14.4.1.5.5.1.7	DisplayString	read-create	City of the company to which the certificate is issued to specified in the Subject Alternative Name extension of the certificate request / selfsigned certificate.
STR wsMgmtCertConfigState	1.3.6.1.4.1.388.14.4.1.5.5.1.8	DisplayString	read-create	State of the company to which the certificate is issued to specified in the Subject Alternative Name extension of the certificate request / selfsigned certificate.
STR wsMgmtCertConfigCountry	1.3.6.1.4.1.388.14.4.1.5.5.1.9	DisplayString	read-create	Country of the company to which the certificate is issued to specified in the Subject Alternative Name extension of the certificate request / selfsigned certificate.
STR wsMgmtCertConfigFqdn	1.3.6.1.4.1.388.14.4.1.5.5.1.10	DisplayString	read-create	Fully qualified domain name of the certificate specified in the Subject Alternative Name extension of the certificate request /selfsigned certificate
IP wsMgmtCertConfigIP	1.3.6.1.4.1.388.14.4.1.5.5.1.11	IpAddress	read-create	IP address specified in the Subject Alternative Name extension of the certificate request /selfsigned certificate
STR wsMgmtCertConfigEmail	1.3.6.1.4.1.388.14.4.1.5.5.1.12	DisplayString	read-create	Email address specified in the Subject Alternative Name extension of the certificate request /selfsigned certificate
PAS wsMgmtCertConfigPassword	1.3.6.1.4.1.388.14.4.1.5.5.1.13	Password	read-create	Password specified in the Subject Alternative Name extension of the certificate request /selfsigned certificate
ABB wsMgmtCertConfigRowStatus	1.3.6.1.4.1.388.14.4.1.5.5.1.14	AbbrRowStatus	read-create	Create/delete
wsMgmtCertCreateTable	1.3.6.1.4.1.388.14.4.1.5.6		not-accessible	Table to enroll/delete certs/requests
wsMgmtCertCreateEntry	1.3.6.1.4.1.388.14.4.1.5.6.1		not-accessible	Description.
INT wsMgmtCertCreateStatus	1.3.6.1.4.1.388.14.4.1.5.6.1.1	INTEGER	read-only	Indicates status of enrollment.
INT wsMgmtCertCreateAction	1.3.6.1.4.1.388.14.4.1.5.6.1.2	INTEGER	read-write	Action for enrollment/deletion of cert/request
wsMgmtCertKeyTable	1.3.6.1.4.1.388.14.4.1.5.7		not-accessible	Table to create RSA keypairs
wsMgmtCertKeyEntry	1.3.6.1.4.1.388.14.4.1.5.7.1		not-accessible	Description.
STR wsMgmtCertKeyLabel	1.3.6.1.4.1.388.14.4.1.5.7.1.1	DisplayString	read-create	Label of the RSA key pair
INT wsMgmtCertKeySize	1.3.6.1.4.1.388.14.4.1.5.7.1.2	INTEGER	read-create	Size of the keypair. This variable is only used for creating the key. Once a key is created, this variable does not have any significance.
ABB wsMgmtCertKeyRowStatus	1.3.6.1.4.1.388.14.4.1.5.7.1.3	AbbrRowStatus	read-create	Description.
I32 wsMgmtCertNumTrustPoint	1.3.6.1.4.1.388.14.4.1.5.8	Integer32	read-only	Description.
wsMgmtNwDiscovery	1.3.6.1.4.1.388.14.4.1.7
wsMgmtNetworkDiscoveryProfilesTable	1.3.6.1.4.1.388.14.4.1.7.1		not-accessible	Description.
wsMgmtNetworkDiscoveryProfilesEntry	1.3.6.1.4.1.388.14.4.1.7.1.1		not-accessible	Description.
I32 wsMgmtDiscoveryProfileIndex	1.3.6.1.4.1.388.14.4.1.7.1.1.1	Integer32	read-only	Description.
STR wsMgmtDiscoveryProfileName	1.3.6.1.4.1.388.14.4.1.7.1.1.2	DisplayString	read-write	Description.
IP wsMgmtDiscoveryStartIPAddr	1.3.6.1.4.1.388.14.4.1.7.1.1.3	IpAddress	read-write	Description.
IP wsMgmtDiscoveryEndIPAddr	1.3.6.1.4.1.388.14.4.1.7.1.1.4	IpAddress	read-write	Description.
INT wsMgmtDiscoverySnmpVersion	1.3.6.1.4.1.388.14.4.1.7.1.1.5	INTEGER	read-write	Description.
DAT wsMgmtDiscoveryLastDoneTime	1.3.6.1.4.1.388.14.4.1.7.1.1.6	DateAndTime	read-only	Description.
INT wsMgmtDiscoveryLastDoneStatus	1.3.6.1.4.1.388.14.4.1.7.1.1.7	INTEGER	read-only	Description.
ROW wsMgmtDiscoveryProfileRowStatus	1.3.6.1.4.1.388.14.4.1.7.1.1.8	RowStatus	read-write	Description.
wsMgmtNetworkDiscoveryTable	1.3.6.1.4.1.388.14.4.1.7.2		not-accessible	Description.
wsMgmtNetworkDiscoveryEntry	1.3.6.1.4.1.388.14.4.1.7.2.1		not-accessible	Description.
IP wsMgmtDiscoveredDeviceIpAddr	1.3.6.1.4.1.388.14.4.1.7.2.1.1	IpAddress	read-create	Description.
STR wsMgmtDiscoveredDeviceHwVersion	1.3.6.1.4.1.388.14.4.1.7.2.1.2	DisplayString	read-create	Description.
STR wsMgmtDiscoveredDeviceSwVersion	1.3.6.1.4.1.388.14.4.1.7.2.1.3	DisplayString	read-create	Description.
U32 wsMgmtDiscoveredDeviceClusterId	1.3.6.1.4.1.388.14.4.1.7.2.1.4	Unsigned32	read-create	Description.
STR wsMgmtDiscoveredDeviceName	1.3.6.1.4.1.388.14.4.1.7.2.1.5	DisplayString	read-create	Description.
STR wsMgmtDiscoveredDeviceLocation	1.3.6.1.4.1.388.14.4.1.7.2.1.6	DisplayString	read-create	Description.
STR wsMgmtDiscoveredDeviceDescr	1.3.6.1.4.1.388.14.4.1.7.2.1.7	DisplayString	read-create	Description.
STR wsMgmtDiscoveredDeviceDiscoveryProfileName	1.3.6.1.4.1.388.14.4.1.7.2.1.8	DisplayString	read-create	Description.
DAT wsMgmtDiscoveredDeviceDiscoveryTime	1.3.6.1.4.1.388.14.4.1.7.2.1.9	DateAndTime	read-create	Description.
ROW wsMgmtDiscoveredNetworkDevicesTableRow	1.3.6.1.4.1.388.14.4.1.7.2.1.10	RowStatus	read-create	Description.
wsMgmtKey	1.3.6.1.4.1.388.14.4.1.8
U32 wsMgmtGenKey	1.3.6.1.4.1.388.14.4.1.8.1	Unsigned32	read-only	gen key for mgmt
wsMgmtSsh	1.3.6.1.4.1.388.14.4.1.11
T/F wsMgmtSshEnable	1.3.6.1.4.1.388.14.4.1.11.1	TruthValue	read-write	Description.
I32 wsMgmtSshPort	1.3.6.1.4.1.388.14.4.1.11.2	Integer32	read-write	Description.
STR wsMgmtSshKeyPairName	1.3.6.1.4.1.388.14.4.1.11.5	DisplayString	read-write	Description.
wsMgmtTelnet	1.3.6.1.4.1.388.14.4.1.13
T/F wsMgmtTelnetEnable	1.3.6.1.4.1.388.14.4.1.13.1	TruthValue	read-write	Description.
I32 wsMgmtTelnetPort	1.3.6.1.4.1.388.14.4.1.13.2	Integer32	read-write	Description.
wsMgmtFtp	1.3.6.1.4.1.388.14.4.1.14
T/F wsMgmtFtpEnable	1.3.6.1.4.1.388.14.4.1.14.1	TruthValue	read-write	Enable the FTP server
STR wsMgmtFtpRoot	1.3.6.1.4.1.388.14.4.1.14.2	DisplayString	read-write	Set the root dir of the FTP server
STR wsMgmtFtpPwd	1.3.6.1.4.1.388.14.4.1.14.3	DisplayString	read-write	Set the password for the FTP server
wsMgmtConformance	1.3.6.1.4.1.388.14.4.1.100
wsMgmtCompliances	1.3.6.1.4.1.388.14.4.1.100.1
wsMgmtCompliance	1.3.6.1.4.1.388.14.4.1.100.1.1			Description.
wsMgmtGroups	1.3.6.1.4.1.388.14.4.1.100.2
wsMgmtGroup	1.3.6.1.4.1.388.14.4.1.100.2.2			Description.
wsMgmtObsoleteGroup	1.3.6.1.4.1.388.14.4.1.100.2.3			Description.

RFC description

Workstation Management MIB containing SNMP objects for specifying information about client workstations including workstation listeners, handlers, and management status.

Start monitoring Symbol Technologies wireless LAN switch controller (general system control/operational-state status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WS-MGMT-MIB

What Is WS-MGMT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description