WLSX-USER-MIB

All MIBs › WLSX-USER-MIB

Organization: Aruba Wireless Networks

Last Updated: 2010-01-26

Category: Aruba Wireless Networking

Description: Monitors Aruba wireless controller IPv4 user session state, authentication status, and per-user traffic statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WLSX-USER-MIB?

WLSX-USER-MIB is an Aruba Networks (HPE) wireless controller MIB providing information about IPv4 user sessions managed by the controller, covering individual wireless client connections. It is intended to expose per-user session state, authentication status, and traffic statistics for each connected wireless client. Its monitoring focus is on client/software session status: it would let an operator determine how many users are currently authenticated, whether a given client's authentication succeeded or failed, and how much traffic each session has generated, which is useful for capacity planning and troubleshooting connectivity complaints, though no object names were confirmed to detail exact counters. It depends on the broader Aruba WLSX controller MIB family for shared system and interface context. It is deployed on Aruba wireless LAN controllers in enterprise Wi-Fi networks serving end-user client devices. Engineers can download the WLSX-USER-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WLSX-USER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Aruba Networks (HPE) wireless LAN controller

Monitoring Examples

No sample objects were provided for this module, so a concrete polling example cannot be given without inventing names; based on the description, this MIB would be expected to include a per-user table indexed by client IP or MAC exposing authentication state and traffic byte/packet counters. An operator would typically use such a table to identify which clients are currently associated and authenticated, and to spot a client stuck in a failed-authentication loop, but no confirmed object identifiers are available here.

Imported Objects

From ARUBA-MIB

wlsxEnterpriseMibModules

OBJECT-IDENTITY

From ARUBA-TC

ArubaAuthenticationMethods
ArubaEncryptionType
ArubaHTMode
ArubaPhyType
ArubaSubAuthenticationMethods
ArubaUserForwardMode

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TEXTUAL-CONVENTION
Unsigned32
snmpModules

From SNMPv2-TC

DisplayString
MacAddress
PhysAddress
RowStatus
StorageType
TAddress
TDomain
TestAndIncr
TimeInterval
TruthValue

From WLSX-WLAN-MIB

wlanESSID

OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
wlsxUserMIB	1.3.6.1.4.1.14823.2.2.1.4			This MIB module defines MIB objects which provide information about the users in an Aruba controller.
wlsxUserAllInfoGroup	1.3.6.1.4.1.14823.2.2.1.4.1
U32 wlsxTotalNumOfUsers	1.3.6.1.4.1.14823.2.2.1.4.1.1	Unsigned32	read-only	Total Number of the users.
wlsxUserTable	1.3.6.1.4.1.14823.2.2.1.4.1.2		not-accessible	This Table lists all the users (both wired and wireless) currently connected to the controller. Users are identified by their MAC address and IP address.
wlsxUserEntry	1.3.6.1.4.1.14823.2.2.1.4.1.2.1		not-accessible	User Entry
MAC nUserPhyAddress	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.1	MacAddress	not-accessible	MAC address of the station from which the user connected to the controller.
IP nUserIpAddress	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.2	IpAddress	not-accessible	IP Address of the user.
STR nUserName	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.3	DisplayString	read-only	Name of the User.
STR nUserRole	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.4	DisplayString	read-only	The Role configured for this user.
TIK nUserUpTime	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.5	TimeTicks	read-only	Time since the user connected to the controller.
ARU nUserAuthenticationMethod	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.6	ArubaAuthenticationMethods	read-only	Authentication mechanism used by the user to connect to the controller.
ARU nUserSubAuthenticationMethod	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.7	ArubaSubAuthenticationMethods	read-only	Sub Authentication Method
STR nUserAuthServerName	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.8	DisplayString	read-only	Name of the authentication server used to authenticate the user.
IP nUserExtVPNAddress	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.9	IpAddress	read-only	External VPN IP Address, if this is a VPN user or 0.0.0.0 if not.
STR nUserApLocation	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.10	DisplayString	read-only	Location of the access point to which the user is associated.
MAC nUserApBSSID	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.11	MacAddress	read-only	BSSID of the access point, which the user used to connect to the controller.
T/F nUserIsOnHomeAgent	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.12	TruthValue	read-only	The Object will indicate if the controller is the home controller for the user or not.
IP nUserHomeAgentIpAddress	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.13	IpAddress	read-only	The Home agent IP Address of the user. If this user is already on the home controller, then this IP is the controller IP else it is the home controller IP address.
INT nUserMobilityStatus	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.14	INTEGER	read-only	The Mobility Status of the User.
I32 nUserHomeVlan	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.15	Integer32	read-only	Home VLAN of the User. If the user is on the home controller then this VLAN will be same as userDefaultVlan.
I32 nUserDefaultVlan	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.16	Integer32	read-only	Default VLAN of the User based on the AP configuration.
I32 nUserAssignedVlan	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.17	Integer32	read-only	This Vlan will be different from the Default VLAN if the user has a derived VLAN Configuration.
STR nUserBWContractName	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.18	DisplayString	read-only	Name of the Bandwidth Contract applied to this user.
INT nUserBWContractUsage	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.19	INTEGER	read-only	Indicates how the Bandwidth Contract is used.
I32 nUserBWContractId	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.20	Integer32	read-only	Bandwidth Contract Id Assigned to the User
T/F nUserIsProxyArpEnabled	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.21	TruthValue	read-only	This object will indicate if the controller is proxy ARPing for the user.
I32 nUserCurrentVlan	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.22	Integer32	read-only	The VLAN to which the user is currently bound.
T/F nUserIsWired	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.23	TruthValue	read-only	Indicates whether this is a wired or wireless user.
I32 nUserConnectedSlot	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.24	Integer32	read-only	The slot to which the user is connected, if wired.
I32 nUserConnectedPort	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.25	Integer32	read-only	The port to which the user is connected, if wired.
ARU nUserPhyType	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.26	ArubaPhyType	read-only	The wireless PHY type to which the user is associated, or 'wired'.
STR nUserMobilityDomainName	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.27	DisplayString	read-only	The name of mobility domain mobile user belongs to.
STR nUserUPBWContractName	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.28	DisplayString	read-only	Name of the Upstream Bandwidth Contract applied to this user.
INT nUserUPBWContractUsage	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.29	INTEGER	read-only	Indicates how the Upstream Bandwidth Contract is used.
I32 nUserUPBWContractId	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.30	Integer32	read-only	Upstream Bandwidth Contract Id Assigned to the User
STR nUserDNBWContractName	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.31	DisplayString	read-only	Name of the Downstream Bandwidth Contract applied to this user.
INT nUserDNBWContractUsage	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.32	INTEGER	read-only	Indicates how the Downstream Bandwidth Contract is used.
I32 nUserDNBWContractId	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.33	Integer32	read-only	Downstream Bandwidth Contract Id Assigned to the User
ARU nUserHTMode	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.34	ArubaHTMode	read-only	The HT mode of this user, if any.
ARU nUserEncryptionMethod	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.35	ArubaEncryptionType	read-only	Encryption method.
ARU nUserForwardMode	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.36	ArubaUserForwardMode	read-only	User mode.
STR nUserDeviceID	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.37	DisplayString	read-only	Device ID
I32 nUserConnectedModule	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.38	Integer32	read-only	The module to which the user is connected, if wired.
STR nUserDeviceType	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.39	DisplayString	read-only	Device type
C64 nUserRxDataPkts64	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.40	Counter64	read-only	This object specifies number of packets received by this IP for which this user is connected to the controller.
C64 nUserTxDataPkts64	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.41	Counter64	read-only	This object specifies number of packets transmitted by this IP for which this user is connected to the controller.
C64 nUserRxDataOctets64	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.42	Counter64	read-only	This object specifies number of octets received by this IP for which this user is connected to the controller.
C64 nUserTxDataOctets64	1.3.6.1.4.1.14823.2.2.1.4.1.2.1.43	Counter64	read-only	This object specifies number of octets transmitted by this IP for which this user is connected to the controller.
wlsxUserSessionTimeTable	1.3.6.1.4.1.14823.2.2.1.4.1.3		not-accessible	This table lists the user session time counts on an ESSID. ssid. The session times are separated into predefined time length buckets, with sessions lasting longer than 240 minutes falling into the 240min bucket.
wlsxUserSessionTimeEntry	1.3.6.1.4.1.14823.2.2.1.4.1.3.1		not-accessible	User session time data, divided into buckets of different time length.
I32 wlsxUserSessionTimeLength	1.3.6.1.4.1.14823.2.2.1.4.1.3.1.1	Integer32	not-accessible	Pre-defined user session time length.
C32 wlsxUserSessionTimeCount	1.3.6.1.4.1.14823.2.2.1.4.1.3.1.2	Counter32	read-only	Number of users that are connected to the essid whose sessions expired in this time interval.
wlsxUserStatsGroup	1.3.6.1.4.1.14823.2.2.1.4.1.4
U32 wlsxNumOfUsers8021x	1.3.6.1.4.1.14823.2.2.1.4.1.4.1	Unsigned32	read-only	Number of 802.1x users.
U32 wlsxNumOfUsersVPN	1.3.6.1.4.1.14823.2.2.1.4.1.4.2	Unsigned32	read-only	Number of VPN users.
U32 wlsxNumOfUsersCP	1.3.6.1.4.1.14823.2.2.1.4.1.4.3	Unsigned32	read-only	Number of Captive Portal users.
U32 wlsxNumOfUsersMAC	1.3.6.1.4.1.14823.2.2.1.4.1.4.4	Unsigned32	read-only	Number of MAC users.
U32 wlsxNumOfUsersStateful8021x	1.3.6.1.4.1.14823.2.2.1.4.1.4.5	Unsigned32	read-only	Number of stateful 802.1x users.

RFC description

Monitors connected wireless users on Aruba access point controllers with session and authentication details.

Start monitoring Aruba Networks (HPE) wireless LAN controller (per-user IPv4 session/auth-status status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WLSX-USER-MIB

What Is WLSX-USER-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description