WLSX-MOBILITY-MIB

All MIBs › WLSX-MOBILITY-MIB

Organization: Aruba Wireless Networks

Last Updated: 2008-04-16

Category: Aruba Wireless Networking

Description: Monitors Aruba wireless mobility controller roaming state, client handoff events, and mobility domain associations.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WLSX-MOBILITY-MIB?

WLSX-MOBILITY-MIB is an Aruba Networks (HPE) wireless controller MIB that provides information about the mobility subsystem, which manages client roaming, handoff, and mobility domain coordination between controllers in a multi-controller wireless deployment. It is intended to expose data about roaming events, mobility domain membership, and inter-controller client handoff activity. Its monitoring relevance is to wireless software/session status rather than physical hardware: it would let an operator confirm that roaming client handoffs between controllers/APs are completing successfully and that mobility domain associations remain consistent, indicating overall wireless session continuity health, though no object names were supplied to confirm specific counters. It depends on the broader Aruba WLSX controller architecture and multi-controller mobility domain feature set. It is deployed across clustered Aruba wireless LAN controllers spanning a mobility domain in a large enterprise Wi-Fi campus deployment. Engineers can download the WLSX-MOBILITY-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WLSX-MOBILITY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Aruba Networks (HPE) wireless LAN controller (mobility domain)

Monitoring Examples

No sample objects were provided for this module, so no specific object-level scenario can be described without inventing names; based on the description, this MIB would be expected to expose roaming/handoff event counters and mobility domain membership state. An operator would typically use such data to confirm client roaming is completing cleanly across controllers in the same mobility domain, but no confirmed object identifiers are available here.

Imported Objects

From ARUBA-MIB

wlsxEnterpriseMibModules

OBJECT-IDENTITY

From ARUBA-TC

ArubaActiveState
ArubaAuthenticationMethods
ArubaEnableValue
ArubaEncryptionMethods
ArubaFrameType
ArubaPhyType
ArubaRogueApType

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
snmpModules

From SNMPv2-TC

DisplayString
MacAddress
PhysAddress
RowStatus
StorageType
TAddress
TDomain
TEXTUAL-CONVENTION
TestAndIncr
TimeInterval
TruthValue

How to Use in IPNetwork Monitor

Example using mobilityProxyPktRx OID:

Select an Aruba Networks (HPE) wireless LAN controller, mobility domain (roaming-handoff/mobility-domain-membership status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type mobilityProxyPktRx into the Find box to locate it in the OID tree, then select it and click OK. This describes the number of packet Proxy State machine Received. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ARU mobilityDomainIsExclusive	1.3.6.1.4.1.14823.2.2.1.9.1.1.1.2	ArubaEnableValue	read-only	Indicates whether this mobility domain is exclusive or not.
STR mobilityDomainName	1.3.6.1.4.1.14823.2.2.1.9.1.1.1.1	DisplayString	not-accessible	The name of the active mobility domain(s) this controller belongs to
ROW mobilityDomainStatus	1.3.6.1.4.1.14823.2.2.1.9.1.1.1.3	RowStatus	read-create	Row status object used to indicate the status of the row
C32 mobilityFABadID	1.3.6.1.4.1.14823.2.2.1.9.5.7	Counter32	read-only	This describes the number of mobileIP messages rejected by FA due to bad identification
C32 mobilityFAHAauthFAIL	1.3.6.1.4.1.14823.2.2.1.9.5.6	Counter32	read-only	This describes the number of FA-HA authentication failed
C32 mobilityFAMalform	1.3.6.1.4.1.14823.2.2.1.9.5.8	Counter32	read-only	This describes the number of mobileIP messages rejected by FA as they are poorly formed
C32 mobilityFARcvRRP	1.3.6.1.4.1.14823.2.2.1.9.5.2	Counter32	read-only	This describes the number of Registration request reply received by FA
C32 mobilityFARRQAccept	1.3.6.1.4.1.14823.2.2.1.9.5.3	Counter32	read-only	This describes the number of Registration request accepted by HA
C32 mobilityFARRQReject	1.3.6.1.4.1.14823.2.2.1.9.5.4	Counter32	read-only	This describes the number of Registration request rejected by HA
C32 mobilityFASentRRQ	1.3.6.1.4.1.14823.2.2.1.9.5.1	Counter32	read-only	This describes the number of Registration request sent by FA
C32 mobilityHABadID	1.3.6.1.4.1.14823.2.2.1.9.4.10	Counter32	read-only	This describes the number of mobileIP messages rejected by HA due to bad identification
C32 mobilityHABndExpire	1.3.6.1.4.1.14823.2.2.1.9.4.13	Counter32	read-only	This describes the number of times binding expired
C32 mobilityHAFAauthFail	1.3.6.1.4.1.14823.2.2.1.9.4.9	Counter32	read-only	This describes the number of HA-FA authentication failed
C32 mobilityHAMalform	1.3.6.1.4.1.14823.2.2.1.9.4.11	Counter32	read-only	This describes the number of mobileIP messages rejected by HA as they are poorly formed
C32 mobilityHAMNauthFail	1.3.6.1.4.1.14823.2.2.1.9.4.8	Counter32	read-only	This describes the number of times MN-HA authentication failed
C32 mobilityHARRQAccept	1.3.6.1.4.1.14823.2.2.1.9.4.3	Counter32	read-only	This describes the number of Registration request accepted by HA
C32 mobilityHARRQAdminDeny	1.3.6.1.4.1.14823.2.2.1.9.4.6	Counter32	read-only	This describes the number of Registration request denied for Administrative reasons by HA
C32 mobilityHARRQDenied	1.3.6.1.4.1.14823.2.2.1.9.4.4	Counter32	read-only	This describes the number of Registration request denied by HA
C32 mobilityHARRQIgnore	1.3.6.1.4.1.14823.2.2.1.9.4.5	Counter32	read-only	This describes the number of Registration request Ignored by HA
C32 mobilityHARRQNoResource	1.3.6.1.4.1.14823.2.2.1.9.4.7	Counter32	read-only	This describes the number of Registration request denied due to lack of resources by HA
C32 mobilityHARxRRQ	1.3.6.1.4.1.14823.2.2.1.9.4.1	Counter32	read-only	This describes the number of Registration request received by HA
C32 mobilityHASentRRP	1.3.6.1.4.1.14823.2.2.1.9.4.2	Counter32	read-only	This describes the number of Registration request reply sent by HA
C32 mobilityHATooManyBnd	1.3.6.1.4.1.14823.2.2.1.9.4.12	Counter32	read-only	This describes the number of Registration Request rejected due to too many bindings at HA
IP mobilityHomeAgentIp	1.3.6.1.4.1.14823.2.2.1.9.1.3.1.3	IpAddress	not-accessible	IP address of the home agent
IP mobilityHomeAgentMask	1.3.6.1.4.1.14823.2.2.1.9.1.3.1.2	IpAddress	read-only	Subnet mask of the home agent
IP mobilityHomeAgentSubnet	1.3.6.1.4.1.14823.2.2.1.9.1.3.1.1	IpAddress	read-only	Subnet of the home agent
I32 mobilityHomeAgentVlan	1.3.6.1.4.1.14823.2.2.1.9.1.3.1.4	Integer32	read-only	Vlan of the home agent
STR mobilityHostDhcpInfo	1.3.6.1.4.1.14823.2.2.1.9.1.4.1.8	DisplayString	read-only	DHCP details of the mobile host
IP mobilityHostHomeMask	1.3.6.1.4.1.14823.2.2.1.9.1.4.1.7	IpAddress	read-only	Home network mask of the mobile host
IP mobilityHostHomeNetwork	1.3.6.1.4.1.14823.2.2.1.9.1.4.1.6	IpAddress	read-only	Home network of the mobile host
I32 mobilityHostHomeVlan	1.3.6.1.4.1.14823.2.2.1.9.1.4.1.5	Integer32	read-only	Home VLAN of the mobile host
IP mobilityHostIp	1.3.6.1.4.1.14823.2.2.1.9.1.4.1.2	IpAddress	read-only	IP address of the mobile host
MAC mobilityHostMac	1.3.6.1.4.1.14823.2.2.1.9.1.4.1.1	MacAddress	not-accessible	MAC address of the mobile host
I32 mobilityHostServiceTime	1.3.6.1.4.1.14823.2.2.1.9.1.4.1.4	Integer32	read-only	Time in seconds mobility service is provided to the mobile host
STR mobilityHostStatus	1.3.6.1.4.1.14823.2.2.1.9.1.4.1.3	DisplayString	read-only	Roaming status of the mobile host
C32 mobilityMNHAauthFAIL	1.3.6.1.4.1.14823.2.2.1.9.5.5	Counter32	read-only	This describes the number of times MN-HA authentication failed
C32 mobilityProxyBadDHCPPkt	1.3.6.1.4.1.14823.2.2.1.9.3.6	Counter32	read-only	This describes the number of DHCP packets marked invalid by mobility
C32 mobilityProxyBusy	1.3.6.1.4.1.14823.2.2.1.9.2.5	Counter32	read-only	This describes the number of mobility events Proxy State machine ignored as it is busy.
C32 mobilityProxyClientEssidChg	1.3.6.1.4.1.14823.2.2.1.9.2.8	Counter32	read-only	This describes the number of times mobility detected client ESSID change
C32 mobilityProxyClientIPChg	1.3.6.1.4.1.14823.2.2.1.9.2.7	Counter32	read-only	This describes the number of times mobility detected client IP change
C32 mobilityProxyDhcpBootpRx	1.3.6.1.4.1.14823.2.2.1.9.3.1	Counter32	read-only	This describes the number of DHCP Bootp messages received
C32 mobilityProxyDHCPNak	1.3.6.1.4.1.14823.2.2.1.9.3.5	Counter32	read-only	This describes the number of DHCP NAK received from the server.
C32 mobilityProxyDHCPNoHomeVlan	1.3.6.1.4.1.14823.2.2.1.9.3.8	Counter32	read-only	This describes the number of DHCP requested IP for which home vlan does not exist.
C32 mobilityProxyDhcpPktDrop	1.3.6.1.4.1.14823.2.2.1.9.3.4	Counter32	read-only	This describes the number of DHCP messages Dropped
C32 mobilityProxyDhcpPktFwd	1.3.6.1.4.1.14823.2.2.1.9.3.3	Counter32	read-only	This describes the number of DHCP messages forwarded
C32 mobilityProxyDhcpPktProc	1.3.6.1.4.1.14823.2.2.1.9.3.2	Counter32	read-only	This describes the number of DHCP messages Processed
C32 mobilityProxyDHCPUnexpFrame	1.3.6.1.4.1.14823.2.2.1.9.3.9	Counter32	read-only	This describes the number of unexpected DHCP frames received from client
C32 mobilityProxyDHCPUnexpRemote	1.3.6.1.4.1.14823.2.2.1.9.3.10	Counter32	read-only	This describes the number of unexpected DHCP frames received from remote HA/FA.
C32 mobilityProxyNoMobility	1.3.6.1.4.1.14823.2.2.1.9.2.6	Counter32	read-only	This describes the number of mobility clients with
C32 mobilityProxyNotDHCP	1.3.6.1.4.1.14823.2.2.1.9.3.7	Counter32	read-only	This describes the number of Non-DHCP frames received by DHCP state machine
C32 mobilityProxyPktDrop	1.3.6.1.4.1.14823.2.2.1.9.2.4	Counter32	read-only	This describes the number of packet Proxy State machine Dropped
C32 mobilityProxyPktFwd	1.3.6.1.4.1.14823.2.2.1.9.2.3	Counter32	read-only	This describes the number of packet Proxy State machine Forwarded back to Datapath
C32 mobilityProxyPktHandled	1.3.6.1.4.1.14823.2.2.1.9.2.2	Counter32	read-only	This describes the number of packet Proxy State machine Processed
C32 mobilityProxyPktRxEx	1.3.6.1.4.1.14823.2.2.1.9.2.1	Counter32	read-only	This describes the number of packet Proxy State machine Received
C32 mobilityRcvRRV	1.3.6.1.4.1.14823.2.2.1.9.6.3	Counter32	read-only	This describes the number of Registration revocation request received
C32 mobilityRcvRRVAck	1.3.6.1.4.1.14823.2.2.1.9.6.2	Counter32	read-only	This describes the number of Registration revocation ack received
C32 mobilityRRVAckIgnore	1.3.6.1.4.1.14823.2.2.1.9.6.6	Counter32	read-only	This describes the number of Registration revocation ack Ignored
C32 mobilityRRVRQIgnore	1.3.6.1.4.1.14823.2.2.1.9.6.5	Counter32	read-only	This describes the number of Registration revocation request ignored
C32 mobilitySentRRVAck	1.3.6.1.4.1.14823.2.2.1.9.6.4	Counter32	read-only	This describes the number of received Registration revocation request ack sent
C32 mobilitySentRRVRQ	1.3.6.1.4.1.14823.2.2.1.9.6.1	Counter32	read-only	This describes the number of Registration revocation request sent
wlsxMobilityConfigGroup	1.3.6.1.4.1.14823.2.2.1.9.1
wlsxMobilityDomainEntry	1.3.6.1.4.1.14823.2.2.1.9.1.1.1		not-accessible	Mobility Domain Entry
wlsxMobilityDomainTable	1.3.6.1.4.1.14823.2.2.1.9.1.1		not-accessible	This table lists all mobility domains configured on the controller.
wlsxMobilityFAStatsGroup	1.3.6.1.4.1.14823.2.2.1.9.5
wlsxMobilityHAFARevocationStatsGroup	1.3.6.1.4.1.14823.2.2.1.9.6
wlsxMobilityHAStatsGroup	1.3.6.1.4.1.14823.2.2.1.9.4
wlsxMobilityHomeAgentEntry	1.3.6.1.4.1.14823.2.2.1.9.1.3.1		not-accessible	Mobility Home Agent Entry
wlsxMobilityHomeAgentTable	1.3.6.1.4.1.14823.2.2.1.9.1.3		not-accessible	This table lists all Home Agents visible to the controller.
wlsxMobilityHostEntry	1.3.6.1.4.1.14823.2.2.1.9.1.4.1		not-accessible	Mobility Host Home Agent Entry
wlsxMobilityHostTable	1.3.6.1.4.1.14823.2.2.1.9.1.4		not-accessible	This table lists all mobile hosts on the controller.
wlsxMobilityMIB	1.3.6.1.4.1.14823.2.2.1.9			This MIB module defines MIB objects which provide information about the mobility subsystem in the Aruba controller.
wlsxMobilityProxyDHCPStatsGroup	1.3.6.1.4.1.14823.2.2.1.9.3
wlsxMobilityProxyStatsGroup	1.3.6.1.4.1.14823.2.2.1.9.2

RFC description

Defines MIB objects for mobility subsystem management in Aruba wireless controllers, including domain and HA/FA statistics.

Start monitoring Aruba Networks (HPE) wireless LAN controller, mobility domain (roaming-handoff/mobility-domain-membership status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WLSX-MOBILITY-MIB

What Is WLSX-MOBILITY-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

How to Use in IPNetwork Monitor

RFC description