WLSX-IFEXT-MIB

All MIBs › WLSX-IFEXT-MIB

Organization: Aruba Wireless Networks

Last Updated: 2012-07-12

Category: Aruba Wireless Networking

Description: Provides Aruba wireless controller extended interface objects for wired and wireless port configuration and statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WLSX-IFEXT-MIB?

WLSX-IFEXT-MIB is an Aruba Networks module providing extended interface objects for both wired and wireless ports on an Aruba wireless LAN controller, supplementing the standard IF-MIB with Aruba-specific port details. It exposes port-level configuration and statistics covering both the controller's wired uplink/downlink ports and its wireless radio interfaces. Monitoring use centers on tracking wired and wireless port operational status and traffic statistics as indicators of the controller's network connectivity health, complementing the broader system-level data in WLSX-SWITCH-MIB. It implicitly builds on standard interface conventions from IF-MIB (RFC 2863), which it extends with Aruba-specific fields. It is deployed on Aruba wireless LAN controllers in enterprise Wi-Fi deployments where both wired switch ports and wireless radios need combined management. Engineers can download the WLSX-IFEXT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in WLSX-IFEXT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Aruba wireless LAN controller

Monitoring Examples

No sample object or table names were extracted for this module, so specific identifiers cannot be cited; an administrator would typically poll extended per-port statistics to detect a wired uplink port or wireless interface that has gone down or is showing abnormal error/traffic counts. Without a verified object list, more granular technical detail would not be grounded in the actual MIB content.

What Can Be Monitored

wired port status/statistics
wireless interface status/statistics
port configuration

Imported Objects

From ARUBA-MIB

wlsxEnterpriseMibModules

OBJECT-IDENTITY

From ARUBA-TC

ArubaDot1dState
ArubaEnableValue
ArubaIfType
ArubaOperStateValue
ArubaPoeState
ArubaPortDuplex
ArubaPortMode
ArubaPortSpeed
ArubaPortType
ArubaVlanValidRange

From RFC1213-MIB

ifIndex

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TEXTUAL-CONVENTION
snmpModules

From SNMPv2-TC

DisplayString
MacAddress
PhysAddress
RowStatus
StorageType
TAddress
TDomain
TestAndIncr
TimeInterval
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
ARU ifExtAccessVlanId	1.3.6.1.4.1.14823.2.2.1.3.1.1.1.10	ArubaVlanValidRange	read-write	The VLAN Id when the port is in Access Mode. This object provides default switch port value if ifExtIsMonitoring is true(1). This object is deprecated in favour of ifExtNAccessVlanId.
ARU ifExtAdminState	1.3.6.1.4.1.14823.2.2.1.3.1.1.1.4	ArubaEnableValue	read-write	The desired state of the interface. This object is deprecated in favour of ifExtNAdminState.
STR ifExtDescr	1.3.6.1.4.1.14823.2.2.1.3.1.1.1.25	DisplayString	read-only	Port Description. This object is deprecated in favour of ifExtNDescr.
ARU ifExtDot1DState	1.3.6.1.4.1.14823.2.2.1.3.1.1.1.8	ArubaDot1dState	read-write	Current Dot1d state of the Port. If ifExtIsMonitoring is true(1), then this object provides disabled(1) as value. This object is deprecated in favour of ifExtNDot1DState.
STR ifExtEgressACLName	1.3.6.1.4.1.14823.2.2.1.3.1.1.1.15	DisplayString	read-write	This object represents the Egress ACL name applied to the port. An Empty string indicates that there is not ACL applied on this port. This object is deprecated in favour of ifExtNEgressACLName.
STR ifExtIngressACLName	1.3.6.1.4.1.14823.2.2.1.3.1.1.1.14	DisplayString	read-write	This object represents the Ingress ACL name applied to the port. An Empty string indicates that there is not ACL applied on this port. This object is deprecated in favour of ifExtNIngressACLName.
T/F ifExtIsMonitoring	1.3.6.1.4.1.14823.2.2.1.3.1.1.1.18	TruthValue	read-write	This object indicates if the port is used for Port monitoring. When the value of this object is true(1), then below objects provide default switch port values configured on this port. ifExtMode, ifExtAccessVlanId, ifExtTrunkNativeVlanId, ifExtTrunkIsAllowedAll, ifExtTrunkAllowedVlanList This object is deprecated in favour of ifExtNIsMonitoring.
T/F ifExtIsMux	1.3.6.1.4.1.14823.2.2.1.3.1.1.1.19	TruthValue	read-write	This object indicates if the port is used as a MUX Port. This object is deprecated in favour of ifExtNIsMux.
T/F ifExtIsTrusted	1.3.6.1.4.1.14823.2.2.1.3.1.1.1.7	TruthValue	read-write	The object indicates if the port is used in the trusted side of the network or the untrusted side. This object is deprecated in favour of ifExtNIsTrusted.
ARU ifExtMode	1.3.6.1.4.1.14823.2.2.1.3.1.1.1.9	ArubaPortMode	read-write	This object indicates if the port is in a Trunk mode or access mode. This object provides default switch port value if ifExtIsMonitoring is true(1). This object is deprecated in favour of ifExtNMode.
ARU ifExtNAccessVlanId	1.3.6.1.4.1.14823.2.2.1.3.1.5.1.11	ArubaVlanValidRange	read-write	The VLAN Id when the port is in Access Mode. This object provides default switch port value if ifExtIsMonitoring is true(1).
ARU ifExtNAdminState	1.3.6.1.4.1.14823.2.2.1.3.1.5.1.5	ArubaEnableValue	read-write	The desired state of the interface.
STR ifExtNDescr	1.3.6.1.4.1.14823.2.2.1.3.1.5.1.24	DisplayString	read-only	Port Description.
ARU ifExtNDot1DState	1.3.6.1.4.1.14823.2.2.1.3.1.5.1.9	ArubaDot1dState	read-write	Current Dot1d state of the Port.
STR ifExtNEgressACLName	1.3.6.1.4.1.14823.2.2.1.3.1.5.1.16	DisplayString	read-write	This object represents the Egress ACL name applied to the port. An Empty string indicates that there is not ACL applied on this port.
STR ifExtNIngressACLName	1.3.6.1.4.1.14823.2.2.1.3.1.5.1.15	DisplayString	read-write	This object represents the Ingress ACL name applied to the port. An Empty string indicates that there is not ACL applied on this port.
T/F ifExtNIsMonitoring	1.3.6.1.4.1.14823.2.2.1.3.1.5.1.19	TruthValue	read-write	This object indicates if the port is used for Port monitoring. When the value of this object is true(1), then below objects provide default switch port values configured on this port. ifExtNMode, ifExtNAccessVlanId, ifExtNTrunkNativeVlanId, ifExtNTrunkIsAllowedAll, ifExtNTrunkAllowedVlanList
T/F ifExtNIsMux	1.3.6.1.4.1.14823.2.2.1.3.1.5.1.20	TruthValue	read-write	This object indicates if the port is used as a MUX Port.
T/F ifExtNIsTrusted	1.3.6.1.4.1.14823.2.2.1.3.1.5.1.8	TruthValue	read-write	The object indicates if the port is used in the trusted side of the network or the untrusted side.
ARU ifExtNMode	1.3.6.1.4.1.14823.2.2.1.3.1.5.1.10	ArubaPortMode	read-write	This object indicates if the port is in a Trunk mode or access mode. This object provides default switch port value if ifExtIsMonitoring is true(1).
I32 ifExtNModuleNumber	1.3.6.1.4.1.14823.2.2.1.3.1.5.1.2	Integer32	not-accessible	This object represents the user-visible (zero-based) Physical Module of the Interface.
INT ifExtNOperState	1.3.6.1.4.1.14823.2.2.1.3.1.5.1.6	INTEGER	read-only	The current operational state of the interface.
ARU ifExtNPoeState	1.3.6.1.4.1.14823.2.2.1.3.1.5.1.7	ArubaPoeState	read-write	The current state of the power over ethernet capability of the port.
ARU ifExtNPortDuplex	1.3.6.1.4.1.14823.2.2.1.3.1.5.1.22	ArubaPortDuplex	read-only	Duplexity of the Port.
I32 ifExtNPortIfIndex	1.3.6.1.4.1.14823.2.2.1.3.1.5.1.4	Integer32	read-only	This is the ifIndex in ifTable, representing this slot, module and port.
I32 ifExtNPortNumber	1.3.6.1.4.1.14823.2.2.1.3.1.5.1.3	Integer32	not-accessible	This object represents the user-visible (zero-based) Physical Port of the Interface.
ARU ifExtNPortSpeed	1.3.6.1.4.1.14823.2.2.1.3.1.5.1.21	ArubaPortSpeed	read-only	Speed of the Port.
ARU ifExtNPortType	1.3.6.1.4.1.14823.2.2.1.3.1.5.1.23	ArubaPortType	read-only	Type of the Port.
STR ifExtNSessionACLName	1.3.6.1.4.1.14823.2.2.1.3.1.5.1.17	DisplayString	read-write	This object represents the Session ACL name applied to the port. An Empty string indicates that there is not ACL applied on this port.
I32 ifExtNSlotNumber	1.3.6.1.4.1.14823.2.2.1.3.1.5.1.1	Integer32	not-accessible	This object represents the user-visible (zero-based) Physical Slot of the Interface.
OCT ifExtNTrunkAllowedVlanList	1.3.6.1.4.1.14823.2.2.1.3.1.5.1.14	OCTET STRING	read-write	A string of octets containing one bit per VLAN for a total of 4096 VLANs in the management domain. The most significant bit of the octet string is the lowest value VLAN of 4096 VLANs. By setting the bit(1) we indicate that the vlan is part of the interface. The most significant bit of the bitmap is transmitted first. Note that if the length of this string is less than 512 octets, any 'missing' octets are assumed to contain the value zero. This object provides default switch port value if ifExtIsMonitoring is true(1).
T/F ifExtNTrunkIsAllowedAll	1.3.6.1.4.1.14823.2.2.1.3.1.5.1.13	TruthValue	read-write	When the mode of the port is Trunk, this Object indicates if the port is part of all the configured Vlans. This object provides default switch port value if ifExtIsMonitoring is true(1).
ARU ifExtNTrunkNativeVlanId	1.3.6.1.4.1.14823.2.2.1.3.1.5.1.12	ArubaVlanValidRange	read-write	The native VLAN Id of the Port, when the port is in dot1q mode. This object provides default switch port value if ifExtIsMonitoring is true(1).
ARU ifExtNXsecVlan	1.3.6.1.4.1.14823.2.2.1.3.1.5.1.18	ArubaVlanValidRange	read-write	This object indicates if the port is an Xsec Port.
INT ifExtOperState	1.3.6.1.4.1.14823.2.2.1.3.1.1.1.5	INTEGER	read-only	The current operational state of the interface. This object is deprecated in favour of ifExtNOperState.
ARU ifExtPoeState	1.3.6.1.4.1.14823.2.2.1.3.1.1.1.6	ArubaPoeState	read-write	The current state of the power over ethernet capability of the port. This object is deprecated in favour of ifExtNPoeState.
ARU ifExtPortDuplex	1.3.6.1.4.1.14823.2.2.1.3.1.1.1.23	ArubaPortDuplex	read-only	Duplexity of the Port. This object is deprecated in favour of ifExtNPortDuplex.
I32 ifExtPortIfIndex	1.3.6.1.4.1.14823.2.2.1.3.1.1.1.3	Integer32	read-only	This is the ifIndex in ifTable, representing this slot and port. This object is deprecated in favour of ifExtNPortIfIndex.
I32 ifExtPortNumber	1.3.6.1.4.1.14823.2.2.1.3.1.1.1.2	Integer32	not-accessible	This object represents the Physical Port of the Interface.
ARU ifExtPortSpeed	1.3.6.1.4.1.14823.2.2.1.3.1.1.1.22	ArubaPortSpeed	read-only	Speed of the Port. This object is deprecated in favour of ifExtNPortSpeed.
ARU ifExtPortType	1.3.6.1.4.1.14823.2.2.1.3.1.1.1.24	ArubaPortType	read-only	Type of the Port. This object is deprecated in favour of ifExtNPortType.
STR ifExtSessionACLName	1.3.6.1.4.1.14823.2.2.1.3.1.1.1.16	DisplayString	read-write	This object represents the Session ACL name applied to the port. An Empty string indicates that there is not ACL applied on this port. This object is deprecated in favour of ifExtNEgressACLName.
I32 ifExtSlotNumber	1.3.6.1.4.1.14823.2.2.1.3.1.1.1.1	Integer32	not-accessible	This object represents the Physical Slot of the Interface.
OCT ifExtTrunkAllowedVlanList	1.3.6.1.4.1.14823.2.2.1.3.1.1.1.13	OCTET STRING	read-write	A string of octets containing one bit per VLAN for a total of 4096 VLANs in the management domain. The most significant bit of the octet string is the lowest value VLAN of 4096 VLANs. By setting the bit(1) we indicate that the vlan is part of the interface. The most significant bit of the bitmap is transmitted first. Note that if the length of this string is less than 512 octets, any 'missing' octets are assumed to contain the value zero. This object provides default switch port value if ifExtIsMonitoring is true(1). This object is deprecated in favour of ifExtNTrunkAllowedVlanList.
T/F ifExtTrunkIsAllowedAll	1.3.6.1.4.1.14823.2.2.1.3.1.1.1.12	TruthValue	read-write	When the mode of the port is Trunk, this Object indicates if the port is part of all the configured Vlans. This object provides default switch port value if ifExtIsMonitoring is true(1). This object is deprecated in favour of ifExtNTrunkIsAllowedAll.
ARU ifExtTrunkNativeVlanId	1.3.6.1.4.1.14823.2.2.1.3.1.1.1.11	ArubaVlanValidRange	read-write	The native VLAN Id of the Port, when the port is in dot1q mode. This object provides default switch port value if ifExtIsMonitoring is true(1). This object is deprecated in favour of ifExtNTrunkNativeVlanId.
I32 ifExtUserModuleNumber	1.3.6.1.4.1.14823.2.2.1.3.1.1.1.26	Integer32	read-only	The user-visible (zero-based) module number.
I32 ifExtUserPortNumber	1.3.6.1.4.1.14823.2.2.1.3.1.1.1.21	Integer32	read-only	The user-visible (zero-based) port number.
I32 ifExtUserSlotNumber	1.3.6.1.4.1.14823.2.2.1.3.1.1.1.20	Integer32	read-only	The user-visible (zero-based) slot number.
ARU ifExtVlanId	1.3.6.1.4.1.14823.2.2.1.3.1.2.1.1	ArubaVlanValidRange	not-accessible	This object represents the VLAN Id of the Interface.
ARU ifExtVlanInterfaceAdminState	1.3.6.1.4.1.14823.2.2.1.3.1.4.1.4	ArubaEnableValue	read-create	This Object indicates the administrative state of the Interface.
STR ifExtVlanInterfaceBWContract	1.3.6.1.4.1.14823.2.2.1.3.1.4.1.3	DisplayString	read-create	This Object indicates the Bandwidth contract on the interface.
STR ifExtVlanInterfaceDescription	1.3.6.1.4.1.14823.2.2.1.3.1.4.1.2	DisplayString	read-create	This Object indicates the description of the Interface.
I32 ifExtVlanInterfaceIfIndex	1.3.6.1.4.1.14823.2.2.1.3.1.4.1.1	Integer32	read-create	This is the ifIndex in ifTable, representing VLAN Interface.
IP ifExtVlanInterfaceIpAddress	1.3.6.1.4.1.14823.2.2.1.3.1.4.1.6	IpAddress	read-create	This Object indicates the IP Address of the Interface.
ARU ifExtVlanInterfaceIpIgmpSnooping	1.3.6.1.4.1.14823.2.2.1.3.1.4.1.12	ArubaEnableValue	read-create	This Object indicates if the IP IGMP snooping is set on the Interface.
IP ifExtVlanInterfaceIpMask	1.3.6.1.4.1.14823.2.2.1.3.1.4.1.7	IpAddress	read-create	This Object indicates the subnet mask of the Interface.
ARU ifExtVlanInterfaceIpNatInside	1.3.6.1.4.1.14823.2.2.1.3.1.4.1.11	ArubaEnableValue	read-create	This Object indicates if the IP nat inside is set on the Interface.
ARU ifExtVlanInterfaceIpRouting	1.3.6.1.4.1.14823.2.2.1.3.1.4.1.10	ArubaEnableValue	read-create	This Object indicates if the IP routing is set on the Interface.
ARU ifExtVlanInterfaceIsLocalArp	1.3.6.1.4.1.14823.2.2.1.3.1.4.1.8	ArubaEnableValue	read-create	This Object indicates if the Local Arp is set on the Interface.
ARU ifExtVlanInterfaceOperState	1.3.6.1.4.1.14823.2.2.1.3.1.4.1.5	ArubaOperStateValue	read-create	This Object indicates the operational state of the Interface.
ROW ifExtVlanInterfaceStatus	1.3.6.1.4.1.14823.2.2.1.3.1.4.1.9	RowStatus	read-create	A Row status Object used to create/modify and indicate the status row.
I32 ifExtVlanMemberPort	1.3.6.1.4.1.14823.2.2.1.3.1.3.1.3	Integer32	read-only	The slot index of the slot referred to by this row (1-based).
I32 ifExtVlanMemberSlot	1.3.6.1.4.1.14823.2.2.1.3.1.3.1.2	Integer32	read-only	The slot index of the slot referred to by this row (1-based).
ROW ifExtVlanMemberStatus	1.3.6.1.4.1.14823.2.2.1.3.1.3.1.1	RowStatus	read-create	A Row status Object used to create/modify and indicate the status row.
ARU ifExtVlanMemberType	1.3.6.1.4.1.14823.2.2.1.3.1.3.1.4	ArubaIfType	read-only	The VLAN member type.
STR ifExtVlanName	1.3.6.1.4.1.14823.2.2.1.3.1.2.1.2	DisplayString	read-create	Name of the VLAN.
ROW ifExtVlanStatus	1.3.6.1.4.1.14823.2.2.1.3.1.2.1.3	RowStatus	read-create	A Row status Object used to create/modify the row.
ARU ifExtXsecVlan	1.3.6.1.4.1.14823.2.2.1.3.1.1.1.17	ArubaVlanValidRange	read-write	This object indicates if the port is an Xsec Port. This object is deprecated in favour of ifExtNXsecVlan.
wlsxIfExtGroup	1.3.6.1.4.1.14823.2.2.1.3.1
wlsxIfExtMIB	1.3.6.1.4.1.14823.2.2.1.3			This MIB module defines MIB objects which provide System level information about the Aruba controller.
wlsxIfExtNPortEntry	1.3.6.1.4.1.14823.2.2.1.3.1.5.1		not-accessible	An entry in wlsxIfExtNPortTable.
wlsxIfExtNPortTable	1.3.6.1.4.1.14823.2.2.1.3.1.5		not-accessible	The table of interface details.
wlsxIfExtPortEntry	1.3.6.1.4.1.14823.2.2.1.3.1.1.1		not-accessible	An entry for one processor contained by the controller.
wlsxIfExtPortTable	1.3.6.1.4.1.14823.2.2.1.3.1.1		not-accessible	The table of processors contained by the controller. This table is deprecated in favor of wlsxIfExtNPortTable.
wlsxIfExtVlanEntry	1.3.6.1.4.1.14823.2.2.1.3.1.2.1		not-accessible	An entry for one processor contained by the controller.
wlsxIfExtVlanInterfaceEntry	1.3.6.1.4.1.14823.2.2.1.3.1.4.1		not-accessible	An entry for one processor contained by the controller.
wlsxIfExtVlanInterfaceTable	1.3.6.1.4.1.14823.2.2.1.3.1.4		not-accessible
wlsxIfExtVlanMemberEntry	1.3.6.1.4.1.14823.2.2.1.3.1.3.1		not-accessible	An entry for one processor contained by the controller.
wlsxIfExtVlanMemberTable	1.3.6.1.4.1.14823.2.2.1.3.1.3		not-accessible
wlsxIfExtVlanTable	1.3.6.1.4.1.14823.2.2.1.3.1.2		not-accessible

RFC description

Nortel vendor-private MIB extending interface management for Wireless LAN Switch platforms.

Start monitoring Aruba wireless LAN controller (wired/wireless port operational-status/traffic status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WLSX-IFEXT-MIB

What Is WLSX-IFEXT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description