WHISP-PLV-MODEM-MIB

All MIBs › WHISP-PLV-MODEM-MIB

Organization: Motorola

Last Updated: 2006-04-04

Category: Cambium/Motorola Wireless Broadband

Description: Monitors Motorola Canopy point-to-multipoint subscriber modem link quality, signal strength, and session statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is WHISP-PLV-MODEM-MIB?

WHISP-PLV-MODEM-MIB is a vendor-specific MIB for Motorola/Cambium Canopy PLV subscriber modems, part of the WHISP family covering point-to-multipoint and power-line/broadband access modem products. It exposes device identity and inventory data (model, serial number, MAC addresses), firmware and bootloader version information, current operating mode, and active bandwidth configuration. From a monitoring standpoint it is centered on software status: it tracks device and SIM firmware versions plus upgrade status fields, letting an administrator confirm whether a firmware push succeeded or is still pending, in addition to basic hardware identity. It is a standalone vendor MIB with no strong dependency chain, though it is commonly polled alongside standard MIB-II interface objects for link-layer statistics. Typical deployment is on fixed wireless broadband access networks, where WISPs and network operators rely on WHISP-PLV-MODEM-MIB SNMP monitoring to track modem fleets centrally across subscriber premises.

IPNetwork Monitor allows you to monitor SNMP objects defined in WHISP-PLV-MODEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Motorola/Cambium Canopy PLV subscriber modem
fixed wireless broadband CPE

Monitoring Examples

An admin would poll modemInfoDeviceFirmwareVer and modemInfoSimFirmwareVer alongside modemInfoDeviceUpgradeStatus and modemInfoSimUpgradeStatus to confirm a remote firmware upgrade completed cleanly across a batch of subscriber modems. modemInfoModel, modemInfoSerialNumber, and modemInfoDeviceMac/modemInfoPlcMac provide the identity fields used to correlate SNMP data with inventory records. If modemInfoDeviceUpgradeStatus reports a failure or stuck state after a scheduled push, that signals the modem needs a manual firmware reflash.

What Can Be Monitored

firmware version
SIM firmware version
bootloader version
firmware upgrade status
current operating mode
active bandwidth configuration

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
MacAddress

From WHISP-GLOBAL-REG-MIB

whispPlvModem

OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using modemInfoDeviceUpgradeStatus OID:

Select a Motorola/Cambium Canopy PLV subscriber modem, fixed wireless broadband CPE (firmware/bootloader upgrade-status status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type modemInfoDeviceUpgradeStatus into the Find box to locate it in the OID tree, then select it and click OK. This object indicates the Modems last Software Upgrade Status. 1 - Upgrade not started 2 - Upgrade in progress 3 - Last Upgrade failed 4 - Last Upgrade was successful. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the value becomes 'failed', since that indicates the modem's last software upgrade attempt did not complete successfully. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
whispPlvModemMIB	1.3.6.1.4.1.161.19.3.7.1			Initial Version.
whispPlvModemObjects	1.3.6.1.4.1.161.19.3.7.1.1
whispPlvModemInfo	1.3.6.1.4.1.161.19.3.7.1.1.1
STR modemInfoModel	1.3.6.1.4.1.161.19.3.7.1.1.1.1	DisplayString	read-only	This object indicates the Modem Model Number.
STR modemInfoSerialNumber	1.3.6.1.4.1.161.19.3.7.1.1.1.2	DisplayString	read-only	This object indicates the Modem Serial Number.
MAC modemInfoDeviceMac	1.3.6.1.4.1.161.19.3.7.1.1.1.3	MacAddress	read-only	This object indicates the Modem Device MAC Address.
MAC modemInfoPlcMac	1.3.6.1.4.1.161.19.3.7.1.1.1.4	MacAddress	read-only	This object indicates the Modem PLC MAC Address
STR modemInfoHardwareVer	1.3.6.1.4.1.161.19.3.7.1.1.1.5	DisplayString	read-only	This object indicates the Modem Hardware Version.
STR modemInfoDeviceFirmwareVer	1.3.6.1.4.1.161.19.3.7.1.1.1.6	DisplayString	read-only	This object indicates the Modem Firmware Version.
STR modemInfoBootLoaderVer	1.3.6.1.4.1.161.19.3.7.1.1.1.7	DisplayString	read-only	This object indicates the Modem Boot Loader Version.
STR modemInfoSimFirmwareVer	1.3.6.1.4.1.161.19.3.7.1.1.1.8	DisplayString	read-only	This object indicates the Intellon Simple Module Firmware Version.
INT modemInfoDeviceUpgradeStatusEx	1.3.6.1.4.1.161.19.3.7.1.1.1.9	INTEGER	read-only	This object indicates the Modems last Software Upgrade Status. 1 - Upgrade not started 2 - Upgrade in progress 3 - Last Upgrade failed 4 - Last Upgrade was successful.
INT modemInfoSimUpgradeStatus	1.3.6.1.4.1.161.19.3.7.1.1.1.10	INTEGER	read-only	This object indicates the Intellon Simple Module Firmware Upgrade Status. 1 - Upgrade not started 2 - Upgrade in progress 3 - Last Upgrade failed 4 - Last Upgrade was successful.
INT modemInfoCurrentMode	1.3.6.1.4.1.161.19.3.7.1.1.1.11	INTEGER	read-only	This object indicates the current operating mode of the Modem. 1 - Bridge Mode 2 - NAT Mode.
INT modemInfoActiveBandwidthConfig	1.3.6.1.4.1.161.19.3.7.1.1.1.12	INTEGER	read-only	This object indicates if the Active Bandwidth settings are either Configured OR Provisioned.
INT modemInfoActiveUpLinkBandwidth	1.3.6.1.4.1.161.19.3.7.1.1.1.13	INTEGER	read-only	This object indicates if the Active Bandwidth settings are either Configured OR Provisioned.
INT modemInfoActiveDownLinkBandwidth	1.3.6.1.4.1.161.19.3.7.1.1.1.14	INTEGER	read-only	This object indicates if the Active Bandwidth settings are either Configured OR Provisioned.
whispPlvModemConfig	1.3.6.1.4.1.161.19.3.7.1.1.2
INT modemConfPacketPriorityConfig	1.3.6.1.4.1.161.19.3.7.1.1.2.1	INTEGER	read-write	This object is used to configure 802.1p Packet Priority type. 1 - Fixed QoS 2 - QoS Based on ToS.
INT modemConfFixedQoSConfig	1.3.6.1.4.1.161.19.3.7.1.1.2.2	INTEGER	read-write	This object is used to configure Fixed QoS type.
INT modemConfUpLinkDataRate	1.3.6.1.4.1.161.19.3.7.1.1.2.3	INTEGER	read-write	This object is used to configure Uplink Data Rate.
INT modemConfDownLinkDataRate	1.3.6.1.4.1.161.19.3.7.1.1.2.4	INTEGER	read-write	This object is used to configure Downlink Data Rate.
OCT modemConfPSD	1.3.6.1.4.1.161.19.3.7.1.1.2.5	OCTET STRING	read-write	This object indicates the Power Spectral Density of the signal, at all the 84 carriers, that the device transmits. Starting at the left most octet, which represents the spectral value at channel number 0, each octet represents the spectral value at the corresponding channel number. The channel numbers 4, 5, 13, 14, 29, 49, 50, 51, 69 and 70 are masked and their spectral values cannot be changed.
I32 modemConfUpLinkMir	1.3.6.1.4.1.161.19.3.7.1.1.2.6	Integer32	read-write	This object is used to configure Uplink Maximum Information Rate. This object is for configuring the Data Rate in Kbps, instead of enumerations, as in 'modemConfUpLinkDataRate'. If this object is configured to a Data Rate, which is not supported by the Modem, it will be internally converted to the nearest higher value supported by the Modem. Modem supports only the following Data Rates: 64Kbps, 128Kbps, 256Kbps, 512Kbps, 1Mbps, 4Mbps, 10Mbps and 85Mbps(Full Speed).
I32 modemConfDownLinkMir	1.3.6.1.4.1.161.19.3.7.1.1.2.7	Integer32	read-write	This object is used to configure Downlink Maximum Information Rate. This object is for configuring the Data Rate in Kbps, instead of enumerations, as in 'modemConfDownLinkDataRate'. If this object is configured to a Data Rate, which is not supported by the Modem, it will be internally converted to the nearest higher value supported by the Modem. Modem supports only the following Data Rates: 64Kbps, 128Kbps, 256Kbps, 512Kbps, 1Mbps, 4Mbps, 10Mbps and 85Mbps(Full Speed)
whispPlvModemTrapConfig	1.3.6.1.4.1.161.19.3.7.1.1.3
IP modemConfTrapIp1	1.3.6.1.4.1.161.19.3.7.1.1.3.1	IpAddress	read-write	This object is used to configure IP Address of SNMP Trap Client #1.
STR modemConfTrapCommStr1	1.3.6.1.4.1.161.19.3.7.1.1.3.2	DisplayString	read-write	This object is used to configure SNMP CommStrunity string for Trap Client #1.
IP modemConfTrapIp2	1.3.6.1.4.1.161.19.3.7.1.1.3.3	IpAddress	read-write	This object is used to configure IP Address of SNMP Trap Client #2.
STR modemConfTrapCommStr2	1.3.6.1.4.1.161.19.3.7.1.1.3.4	DisplayString	read-write	This object is used to configure SNMP CommStrunity string for Trap Client #2.
IP modemConfTrapIp3	1.3.6.1.4.1.161.19.3.7.1.1.3.5	IpAddress	read-write	This object is used to configure IP Address of SNMP Trap Client #3.
STR modemConfTrapCommStr3	1.3.6.1.4.1.161.19.3.7.1.1.3.6	DisplayString	read-write	This object is used to configure SNMP CommStrunity string for Trap Client #3.
IP modemConfTrapIp4	1.3.6.1.4.1.161.19.3.7.1.1.3.7	IpAddress	read-write	This object is used to configure IP Address of SNMP Trap Client #4.
STR modemConfTrapCommStr4	1.3.6.1.4.1.161.19.3.7.1.1.3.8	DisplayString	read-write	This object is used to configure SNMP CommStrunity string for Trap Client #4.
IP modemConfTrapIp5	1.3.6.1.4.1.161.19.3.7.1.1.3.9	IpAddress	read-write	This object is used to configure IP Address of SNMP Trap Client #5.
STR modemConfTrapCommStr5	1.3.6.1.4.1.161.19.3.7.1.1.3.10	DisplayString	read-write	This object is used to configure SNMP CommStrunity string for Trap Client #5.
IP modemConfTrapIp6	1.3.6.1.4.1.161.19.3.7.1.1.3.11	IpAddress	read-write	This object is used to configure IP Address of SNMP Trap Client #6.
STR modemConfTrapCommStr6	1.3.6.1.4.1.161.19.3.7.1.1.3.12	DisplayString	read-write	This object is used to configure SNMP CommStrunity string for Trap Client #6.
IP modemConfTrapIp7	1.3.6.1.4.1.161.19.3.7.1.1.3.13	IpAddress	read-write	This object is used to configure IP Address of SNMP Trap Client #7.
STR modemConfTrapCommStr7	1.3.6.1.4.1.161.19.3.7.1.1.3.14	DisplayString	read-write	This object is used to configure SNMP CommStrunity string for Trap Client #7.
IP modemConfTrapIp8	1.3.6.1.4.1.161.19.3.7.1.1.3.15	IpAddress	read-write	This object is used to configure IP Address of SNMP Trap Client #8.
STR modemConfTrapCommStr8	1.3.6.1.4.1.161.19.3.7.1.1.3.16	DisplayString	read-write	This object is used to configure SNMP CommStrunity string for Trap Client #8.
IP modemConfTrapIp9	1.3.6.1.4.1.161.19.3.7.1.1.3.17	IpAddress	read-write	This object is used to configure IP Address of SNMP Trap Client #9.
STR modemConfTrapCommStr9	1.3.6.1.4.1.161.19.3.7.1.1.3.18	DisplayString	read-write	This object is used to configure SNMP CommStrunity string for Trap Client #9.
IP modemConfTrapIp10	1.3.6.1.4.1.161.19.3.7.1.1.3.19	IpAddress	read-write	This object is used to configure IP Address of SNMP Trap Client #10.
STR modemConfTrapCommStr10	1.3.6.1.4.1.161.19.3.7.1.1.3.20	DisplayString	read-write	This object is used to configure SNMP CommStrunity string for Trap Client #10.
whispPlvModemAdmConfig	1.3.6.1.4.1.161.19.3.7.1.1.4
INT modemAdmConfIpConfig	1.3.6.1.4.1.161.19.3.7.1.1.4.1	INTEGER	read-write	This object is used to enable or disable the DHCP client, to configure LAN IP Address of the Modem. If the NAT functionality is enabled in the Modem, user will not be able to enable DHCP client to configure the IP address and this object should behave as a read-only object.
IP modemAdmConfIp	1.3.6.1.4.1.161.19.3.7.1.1.4.2	IpAddress	read-write	This object is used to configure IP Address of the Modem. If the NAT functionality is enabled in the Modem, then this object represents the LAN IP Address.
IP modemAdmConfIpSubnetMask	1.3.6.1.4.1.161.19.3.7.1.1.4.3	IpAddress	read-write	This object is used to configure IP Subnet Mask of the Modem. If the NAT functionality is enabled in the Modem, then this object represents the LAN IP Subnet Mask.
STR modemAdmConfNEK	1.3.6.1.4.1.161.19.3.7.1.1.4.4	DisplayString	read-write	This object is used to configure Network Encryption Key of the Modem.
STR modemAdmConfSnmpGetCommStr	1.3.6.1.4.1.161.19.3.7.1.1.4.5	DisplayString	read-write	This object is used to configure SNMP 'Read' community string of the Modem.
STR modemAdmConfSnmpSetCommStr	1.3.6.1.4.1.161.19.3.7.1.1.4.6	DisplayString	read-write	This object is used to configure SNMP 'Read-Write' community string of the Modem.
STR modemAdmConfSnmpAdminCommStr	1.3.6.1.4.1.161.19.3.7.1.1.4.7	DisplayString	read-write	This object is used to configure SNMP 'Admin' community string of the Modem.
STR modemAdmConfLoginUsername	1.3.6.1.4.1.161.19.3.7.1.1.4.8	DisplayString	read-write	This object is used to configure Modem's System Management Login Username.
STR modemAdmConfLoginPassword	1.3.6.1.4.1.161.19.3.7.1.1.4.9	DisplayString	read-write	This object is used to configure Modem's System Management Login Password.
IP modemAdmConfFtpServerIp	1.3.6.1.4.1.161.19.3.7.1.1.4.10	IpAddress	read-write	This object is used to configure IP Address of FTP server hosting auto-upgrade files.
STR modemAdmConfFtpUsername	1.3.6.1.4.1.161.19.3.7.1.1.4.11	DisplayString	read-write	This object is used to configure Username to login to a FTP server, for use with FTP-based auto-upgrade.
STR modemAdmConfFtpPassword	1.3.6.1.4.1.161.19.3.7.1.1.4.12	DisplayString	read-write	This object is used to configure Password to login to a FTP server, for use with FTP-based auto-upgrade.
STR modemAdmConfFtpFile	1.3.6.1.4.1.161.19.3.7.1.1.4.13	DisplayString	read-write	This object is used to configure Path and/or Filename of the firmware file, for use with FTP-based auto-upgrade.
INT modemAdmConfDeviceUpgradeStart	1.3.6.1.4.1.161.19.3.7.1.1.4.14	INTEGER	read-write	This object is used to start Firmware Upgrade process in the Modem. To start the upgrade process, this object should be set to '1'.
INT modemAdmConfSimUpgradeStart	1.3.6.1.4.1.161.19.3.7.1.1.4.15	INTEGER	read-write	This object is used to start Intellon Simple Module Firmware Upgrade process. To start the upgrade process, this object should be set to '1'.
INT modemAdmConfSystemReboot	1.3.6.1.4.1.161.19.3.7.1.1.4.16	INTEGER	read-write	This object is used to Reboot the Modem. To reboot the modem, this object should be set to '1'.
INT modemAdmConfReset	1.3.6.1.4.1.161.19.3.7.1.1.4.17	INTEGER	read-write	This object is used to reset the Modem configuration to Factory Defaults. To reset the modem configuration to factory defaults, this object should be set to '1'.
whispPlvModemAdmWConfig	1.3.6.1.4.1.161.19.3.7.1.1.5
INT modemAdmWConfNatConfig	1.3.6.1.4.1.161.19.3.7.1.1.5.1	INTEGER	read-write	This object is used to Enable or Disable the NAT Functionality in the Modem.
INT modemAdmWConfWanConfig	1.3.6.1.4.1.161.19.3.7.1.1.5.2	INTEGER	read-write	This object is used to Enable or Disable DHCP client, to configure the WAN IP Address. This object is accessible only when NAT functionality is enabled in the Modem.
IP modemAdmWConfWanIp	1.3.6.1.4.1.161.19.3.7.1.1.5.3	IpAddress	read-write	This object is used to configure WAN IP Address of the Modem. This object is accessible only when NAT functionality is enabled in the Modem.
IP modemAdmWConfSubnetMask	1.3.6.1.4.1.161.19.3.7.1.1.5.4	IpAddress	read-write	This object is used to configure WAN IP Subnet Mask of the Modem. This object is accessible only when NAT functionality is enabled in the Modem.
IP modemAdmWConfGateway	1.3.6.1.4.1.161.19.3.7.1.1.5.5	IpAddress	read-write	This object is used to configure Default Gateway IP of the Modem. This object is accessible only when NAT functionality is enabled in the Modem.
IP modemAdmWConfDNS1	1.3.6.1.4.1.161.19.3.7.1.1.5.6	IpAddress	read-write	This object is used to configure DNS Server #1. This object is accessible only when NAT functionality is enabled in the Modem.
IP modemAdmWConfDNS2	1.3.6.1.4.1.161.19.3.7.1.1.5.7	IpAddress	read-write	This object is used to configure DNS Server #2. This object is accessible only when NAT functionality is enabled in the Modem.
INT modemAdmWConfDhcpConfig	1.3.6.1.4.1.161.19.3.7.1.1.5.8	INTEGER	read-write	This object is used to Enable or Disable DHCP Server. This object is accessible only when NAT functionality is enabled in the Modem.
IP modemAdmWConfDhcpStartIp	1.3.6.1.4.1.161.19.3.7.1.1.5.9	IpAddress	read-write	This object is used to configure Starting Address of the IP address block, that the DHCP Server can assign to its clients. This object is accessible only when NAT functionality is enabled in the Modem.
IP modemAdmWConfDhcpEndIp	1.3.6.1.4.1.161.19.3.7.1.1.5.10	IpAddress	read-write	This object is used to configure Last Address of the IP address block, that the DHCP Server can assign to its clients. This object is accessible only when NAT functionality is enabled in the Modem.
INT modemAdmWConfDhcpLeaseTime	1.3.6.1.4.1.161.19.3.7.1.1.5.11	INTEGER	read-write	This object is used to configure time period for which the IP address assigned to a client is valid. This object is accessible only when NAT functionality is enabled in the Modem.
INT modemAdmWConfDmzConfig	1.3.6.1.4.1.161.19.3.7.1.1.5.12	INTEGER	read-write	This object is used to Enable or Disable the DMZ in the MOdem. This object is accessible only when NAT functionality is enabled in the Modem.
IP modemAdmWConfDmzIp	1.3.6.1.4.1.161.19.3.7.1.1.5.13	IpAddress	read-write	This object is used to configure DMZ IP Address of the Modem. This object is accessible only when NAT functionality is enabled in the Modem.
whispPlvModemAdmSnmpAcessConfig	1.3.6.1.4.1.161.19.3.7.1.1.6
IP modemAdmSnmpAccessIpNetwork1	1.3.6.1.4.1.161.19.3.7.1.1.6.1	IpAddress	read-write	This object is used to configure SNMP Access Network Address #1.
IP modemAdmSnmpAccessIpNetworkMask1	1.3.6.1.4.1.161.19.3.7.1.1.6.2	IpAddress	read-write	This object is used to configure SNMP Access Network Address Mask #1.
IP modemAdmSnmpAccessIpNetwork2	1.3.6.1.4.1.161.19.3.7.1.1.6.3	IpAddress	read-write	This object is used to configure SNMP Access Network Address #2.
IP modemAdmSnmpAccessIpNetworkMask2	1.3.6.1.4.1.161.19.3.7.1.1.6.4	IpAddress	read-write	This object is used to configure SNMP Access Network Address Mask #2.
IP modemAdmSnmpAccessIpNetwork3	1.3.6.1.4.1.161.19.3.7.1.1.6.5	IpAddress	read-write	This object is used to configure SNMP Access Network Address #3.
IP modemAdmSnmpAccessIpNetworkMask3	1.3.6.1.4.1.161.19.3.7.1.1.6.6	IpAddress	read-write	This object is used to configure SNMP Access Network Address Mask #3.
IP modemAdmSnmpAccessIpNetwork4	1.3.6.1.4.1.161.19.3.7.1.1.6.7	IpAddress	read-write	This object is used to configure SNMP Access Network Address #4.
IP modemAdmSnmpAccessIpNetworkMask4	1.3.6.1.4.1.161.19.3.7.1.1.6.8	IpAddress	read-write	This object is used to configure SNMP Access Network Address Mask #4.
IP modemAdmSnmpAccessIpNetwork5	1.3.6.1.4.1.161.19.3.7.1.1.6.9	IpAddress	read-write	This object is used to configure SNMP Access Network Address #5.
IP modemAdmSnmpAccessIpNetworkMask5	1.3.6.1.4.1.161.19.3.7.1.1.6.10	IpAddress	read-write	This object is used to configure SNMP Access Network Address Mask #5.
IP modemAdmSnmpAccessIpNetwork6	1.3.6.1.4.1.161.19.3.7.1.1.6.11	IpAddress	read-write	This object is used to configure SNMP Access Network Address #6.
IP modemAdmSnmpAccessIpNetworkMask6	1.3.6.1.4.1.161.19.3.7.1.1.6.12	IpAddress	read-write	This object is used to configure SNMP Access Network Address Mask #6.
IP modemAdmSnmpAccessIpNetwork7	1.3.6.1.4.1.161.19.3.7.1.1.6.13	IpAddress	read-write	This object is used to configure SNMP Access Network Address #7.
IP modemAdmSnmpAccessIpNetworkMask7	1.3.6.1.4.1.161.19.3.7.1.1.6.14	IpAddress	read-write	This object is used to configure SNMP Access Network Address Mask #7.
IP modemAdmSnmpAccessIpNetwork8	1.3.6.1.4.1.161.19.3.7.1.1.6.15	IpAddress	read-write	This object is used to configure SNMP Access Network Address #8.
IP modemAdmSnmpAccessIpNetworkMask8	1.3.6.1.4.1.161.19.3.7.1.1.6.16	IpAddress	read-write	This object is used to configure SNMP Access Network Address Mask #8.
IP modemAdmSnmpAccessIpNetwork9	1.3.6.1.4.1.161.19.3.7.1.1.6.17	IpAddress	read-write	This object is used to configure SNMP Access Network Address #9.
IP modemAdmSnmpAccessIpNetworkMask9	1.3.6.1.4.1.161.19.3.7.1.1.6.18	IpAddress	read-write	This object is used to configure SNMP Access Network Address Mask #9.
IP modemAdmSnmpAccessIpNetwork10	1.3.6.1.4.1.161.19.3.7.1.1.6.19	IpAddress	read-write	This object is used to configure SNMP Access Network Address #10.
IP modemAdmSnmpAccessIpNetworkMask10	1.3.6.1.4.1.161.19.3.7.1.1.6.20	IpAddress	read-write	This object is used to configure SNMP Access Network Address Mask #10.
whispPlvModemAdmRepeaterConfig	1.3.6.1.4.1.161.19.3.7.1.1.7
INT modemAdmRepeaterConfOperatingMode	1.3.6.1.4.1.161.19.3.7.1.1.7.1	INTEGER	read-write	This object is used to configure the Modem operating mode. Modem should be rebooted for the change in the configuration to take effect.
MAC modemAdmRepeaterConfModemMAC1	1.3.6.1.4.1.161.19.3.7.1.1.7.2	MacAddress	read-write	This object represents the MAC Address of Modem 1, that uses the Repeater.
MAC modemAdmRepeaterConfModemMAC2	1.3.6.1.4.1.161.19.3.7.1.1.7.3	MacAddress	read-write	This object represents the MAC Address of Modem 2, that uses the Repeater.
MAC modemAdmRepeaterConfModemMAC3	1.3.6.1.4.1.161.19.3.7.1.1.7.4	MacAddress	read-write	This object represents the MAC Address of Modem 3, that uses the Repeater.
MAC modemAdmRepeaterConfModemMAC4	1.3.6.1.4.1.161.19.3.7.1.1.7.5	MacAddress	read-write	This object represents the MAC Address of Modem 4, that uses the Repeater.
whispPlvModemAdmVLANTable	1.3.6.1.4.1.161.19.3.7.1.1.8		not-accessible	This table contains one row per device connected behind the Modem, either directly OR using a switch
whispPlvModemAdmVLANEntry	1.3.6.1.4.1.161.19.3.7.1.1.8.1		not-accessible	VLAN information of the device connected behind the Modem.
I32 modemAdmVLANIndex	1.3.6.1.4.1.161.19.3.7.1.1.8.1.1	Integer32	not-accessible	The value of this object identifies the index to this entry.
MAC modemAdmVLANPhysAddress	1.3.6.1.4.1.161.19.3.7.1.1.8.1.2	MacAddress	read-only	This object indicates the MAC Address of the device connected behind the Modem.
I32 modemAdmVLANId	1.3.6.1.4.1.161.19.3.7.1.1.8.1.3	Integer32	read-write	This object indicates the VLAN ID of the device connected behind the Modem.
whispPlvModemEvents	1.3.6.1.4.1.161.19.3.7.1.2
modemTrapPrefix	1.3.6.1.4.1.161.19.3.7.1.2.0
NTF modemTrapDeviceUpgradeStarted	1.3.6.1.4.1.161.19.3.7.1.2.0.1			This Notification is generated if the Modem has started the firmware Upgrade process.
NTF modemTrapDeviceUpgradeCompleted	1.3.6.1.4.1.161.19.3.7.1.2.0.2			This Notification is generated once the Upgrade process is completed.
NTF modemTrapSimUpgradeStarted	1.3.6.1.4.1.161.19.3.7.1.2.0.3			This Notification is generated if the Intellon Simple Module Upgrade process is started.
NTF modemTrapSimUpgradeCompleted	1.3.6.1.4.1.161.19.3.7.1.2.0.4			This Notification is generated once the Simple Module Upgrade process is completed.
whispPlvModemConformance	1.3.6.1.4.1.161.19.3.7.1.3
whispPlvModemGroups	1.3.6.1.4.1.161.19.3.7.1.3.1
whispPlvModemInfoGroup	1.3.6.1.4.1.161.19.3.7.1.3.1.1			The collection of objects that gives Modem device information.
whispPlvModemConfigGroup	1.3.6.1.4.1.161.19.3.7.1.3.1.2			The collection of objects used to configure the Modem. These objects are accessible to everyone.
whispPlvModemTrapConfigGroup	1.3.6.1.4.1.161.19.3.7.1.3.1.3			The collection of Modems SNMP Trap Configuration objects. These objects are accessible to everyone.
whispPlvModemAdmConfigGroup	1.3.6.1.4.1.161.19.3.7.1.3.1.4			The collection of objects that are used to configure the Modem. These objects are accessible only thru 'admin' community string.
whispPlvModemAdmWConfigGroup	1.3.6.1.4.1.161.19.3.7.1.3.1.5			The collection of Modems WAN Configuration objects. These objects are accessible only thru 'admin' community string.
whispPlvModemAdmSnmpAcessConfigGroup	1.3.6.1.4.1.161.19.3.7.1.3.1.6			The collection of Modems SNMP Access Network objects. These objects are accessible only thru 'admin' community string.
whispPlvModemNotificationsGroup	1.3.6.1.4.1.161.19.3.7.1.3.1.7			The collection of Notifications generated by the Modem.
whispPlvModemAdmRepeaterConfigGroup	1.3.6.1.4.1.161.19.3.7.1.3.1.8			The collection of Repeater Configuration Objects. These objects are accessible only thru 'admin' community string.
whispPlvModemAdmVLANConfigGroup	1.3.6.1.4.1.161.19.3.7.1.3.1.9			The collection of VLAN Configuration Objects. These objects are accessible only thru 'admin' community string.
whispPlvModemCompliances	1.3.6.1.4.1.161.19.3.7.1.3.2
whispPlvModemCompliance	1.3.6.1.4.1.161.19.3.7.1.3.2.1			The compliance statement of SNMP entities which implement the WHISP-PLV-MODEM-MIB.

RFC description

Vendor-private MIB for WHISP/Proxim modem management, defining objects for monitoring modem status, signal levels, and connection statistics on wireless systems.

Start monitoring Motorola/Cambium Canopy PLV subscriber modem, fixed wireless broadband CPE (firmware/bootloader upgrade-status status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download WHISP-PLV-MODEM-MIB