All MIBs › WHISP-PLV-MODEM-MIB › modemConfDownLinkMir
modemConfDownLinkMir
Module: WHISP-PLV-MODEM-MIB
OID (symbolic): WHISP-PLV-MODEM-MIB::modemConfDownLinkMir
OID (numeric): 1.3.6.1.4.1.161.19.3.7.1.1.2.7
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: This object is used to configure Downlink Maximum Information Rate. This object is for configuring the Data Rate in Kbps, instead of enumerations, as in 'modemConfDownLinkDataRate'. If this object is configured to a Data Rate, which is not supported by the Modem, it will be internally converted to the nearest higher value supported by the Modem. Modem supports only the following Data Rates: 64Kbps, 128Kbps, 256Kbps, 512Kbps, 1Mbps, 4Mbps, 10Mbps and 85Mbps(Full Speed)
What is modemConfDownLinkMir?
Configures the downlink Maximum Information Rate directly in Kbps rather than via the enumerated modemConfDownLinkDataRate; an unsupported value is silently rounded up to the nearest supported tier (64Kbps, 128Kbps, 256Kbps, 512Kbps, 1Mbps, 4Mbps, 10Mbps, or 85Mbps full speed). Admins use this when they need to express the downlink cap as a specific Kbps figure, e.g. matching a service-plan number, rather than picking from the fixed enum.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.161.19.3.7.1.1.2.7 snmpwalk -v2c -c public <target> WHISP-PLV-MODEM-MIB::modemConfDownLinkMir
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.161.19.3.7.1.1.2.7.1 snmpget -v2c -c public <target> WHISP-PLV-MODEM-MIB::modemConfDownLinkMir.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.161.19.3.7.1.1.2.7.1 i <value>
Start monitoring Motorola/Cambium Canopy PLV subscriber modem, fixed wireless broadband CPE (firmware/bootloader upgrade-status status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WHISP-PLV-MODEM-MIB::modemConfDownLinkMir OID value, configure state conditions and alerts, and monitor any Motorola/Cambium Canopy PLV subscriber modem, fixed wireless broadband CPE (firmware/bootloader upgrade-status status) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.161 | mot | WHISP-GLOBAL-REG-MIB |
| 1.3.6.1.4.1.161.19 | whispRoot | WHISP-GLOBAL-REG-MIB |
| 1.3.6.1.4.1.161.19.3 | whispProducts | WHISP-GLOBAL-REG-MIB |
| 1.3.6.1.4.1.161.19.3.7 | whispPlvModem | WHISP-GLOBAL-REG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.161.19.3.7.1 | whispPlvModemMIB | WHISP-PLV-MODEM-MIB |
| 1.3.6.1.4.1.161.19.3.7.1.1 | whispPlvModemObjects | WHISP-PLV-MODEM-MIB |
| 1.3.6.1.4.1.161.19.3.7.1.1.2 | whispPlvModemConfig | WHISP-PLV-MODEM-MIB |
| 1.3.6.1.4.1.161.19.3.7.1.1.2.7 | modemConfDownLinkMir | WHISP-PLV-MODEM-MIB |