datarate
Module: WG302
OID (symbolic): WG302::datarate
OID (numeric): 1.3.6.1.4.1.4526.4.6.2.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This attribute shall indicate the transmite rate. When the operatemode is:
auto(0) - can set to 0:best, 1:1Mb/s, 2:2Mb/s, 5.5:5.5Mb/s, 11:11 Mb/s, 6:6Mb/s, 9:9Mb/s, 12:12Mb/s, 18:18Mb/s, 24:24Mb/s, 36:36Mb/s, 48:48Mb/s, and 54:54Mb/s.
dot11a(1) - can set to 0:best, 6:6Mb/s, 9:9Mb/s, 12:12Mb/s, 18:18Mb/s, 24:24Mb/s, 36:36Mb/s, 48:48Mb/s and 54:54Mb/s.
dot11b(2) - can set to 0:best, 1:1Mb/s, 2:2Mb/s, 5.5:5.5Mb/s, and 11:11 Mb/s.
dot11g(3) - can set to 0:best, 6:6Mb/s, 9:9Mb/s, 12:12Mb/s, 18:18Mb/s, 24:24Mb/s, 36:36Mb/s, 48:48Mb/s and 54:54Mb/s.
What is datarate?
Selects the wireless transmit rate the radio should use, from best(0) (auto-negotiate) up to fixed rates like rate54Mbps(54000). Admins might pin a lower fixed rate to improve range/reliability in a noisy RF environment, or leave it at best(0) for automatic rate adaptation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4526.4.6.2.1.4 snmpwalk -v2c -c public <target> WG302::datarate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4526.4.6.2.1.4.1 snmpget -v2c -c public <target> WG302::datarate.1
Start monitoring NETGEAR ProSafe WG302 wireless access point (radio/client-activity and reachability status) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the WG302::datarate OID value, configure state conditions and alerts, and monitor any NETGEAR ProSafe WG302 wireless access point (radio/client-activity and reachability status) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4526 | netgear | FSM726S-MIB |
| 1.3.6.1.4.1.4526.4 | wirelessProducts | NETGEAR-ME-MIB |
| 1.3.6.1.4.1.4526.4.6 | wg302v2 | QUANTA-LB6M-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4526.4.6.2 | wlanSettingTable | WG302 |
| 1.3.6.1.4.1.4526.4.6.2.1 | wlanSettingEntry | WG302 |
| 1.3.6.1.4.1.4526.4.6.2.1.4 | datarate | WG302 |