VELOCLOUD-EDGE-MIB

All MIBs › VELOCLOUD-EDGE-MIB

Organization: VMware Corporation

Last Updated: 2019-08-02

Category: VMware Virtualization

Description: Monitors VMware VeloCloud SD-WAN edge device link quality, tunnel state, and application metrics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is VELOCLOUD-EDGE-MIB?

VELOCLOUD-EDGE-MIB is a VMware Corporation (VeloCloud SD-WAN heritage) proprietary MIB reporting high-availability state and link-level performance on a VeloCloud Edge SD-WAN appliance. Its objects cover HA admin state, peer state, active/standby WAN and LAN interface counts, 5-minute and 30-second CPU utilization percent, memory-used percent, link count, and a per-link table (interface ID/name, TX/RX packets and bytes broken out by three priority classes P1/P2/P3). As a performance/status MIB it lets an administrator confirm HA failover state and watch per-link, per-priority-class traffic on a VeloCloud SD-WAN edge appliance. It is deployed on VMware VeloCloud Edge SD-WAN appliances. Engineers can download the VELOCLOUD-EDGE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in VELOCLOUD-EDGE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

VMware VeloCloud Edge SD-WAN appliances

Monitoring Examples

An administrator checks vceHaPeerState and vceLinkTxP1Pkt/vceLinkRxP1Pkt to confirm HA status and high-priority traffic flow on a VMware VeloCloud Edge appliance.

What Can Be Monitored

HA state, CPU/memory utilization, and per-link priority-class traffic

Imported Objects

From IF-MIB

InterfaceIndex

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DisplayString
PhysAddress
TEXTUAL-CONVENTION
TruthValue

From UUID-TC-MIB

UUID

From VELOCLOUD-MIB

modules

OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using vceLinkTxP1Pkt OID:

Select a VMware VeloCloud Edge SD-WAN appliance (HA failover/CPU-memory/per-link traffic status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type vceLinkTxP1Pkt into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the total packets transmitted through P1 link. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
edge	1.3.6.1.4.1.45346.1.1			VeloCloud Edge MIB Definitions
vceARP	1.3.6.1.4.1.45346.1.1.2.5
I32 vceArpCtag	1.3.6.1.4.1.45346.1.1.2.5.2.2.1.6	Integer32	read-only	C-tag value
vceArpEntry	1.3.6.1.4.1.45346.1.1.2.5.2.2.1		not-accessible	An entry containing additional management information applicable to a particular arp entry
vceArpGroup	1.3.6.1.4.1.45346.1.1.2.5.1			Conformance group for vceArpGroup objects.
IP vceArpIpAddr	1.3.6.1.4.1.45346.1.1.2.5.2.2.1.3	InetAddress	not-accessible	The Ip address of the arp entry
IPt vceArpIpAddrType	1.3.6.1.4.1.45346.1.1.2.5.2.2.1.2	InetAddressType	not-accessible	The type of arp IP address.
NUM vceArpItf	1.3.6.1.4.1.45346.1.1.2.5.2.2.1.1	InterfaceIndex	not-accessible	A unique value, greater than zero, for the interface used by the arp entry.
PHY vceArpMac	1.3.6.1.4.1.45346.1.1.2.5.2.2.1.4	PhysAddress	read-only	The MAC address of the arp entry
I32 vceArpNum	1.3.6.1.4.1.45346.1.1.2.5.2.1	Integer32	read-only	The total number of arp entries presented on the VeloCloud Edge.
vceArpObject	1.3.6.1.4.1.45346.1.1.2.5.2
I32 vceArpStag	1.3.6.1.4.1.45346.1.1.2.5.2.2.1.5	Integer32	read-only	S-tag value
VCE vceArpState	1.3.6.1.4.1.45346.1.1.2.5.2.2.1.7	VceArpStateType	read-only	The State of arp entry
vceArpTable	1.3.6.1.4.1.45346.1.1.2.5.2.2		not-accessible	A list of arp entries. The number of entries is given by the value of vceArpNum.
vceCompliance	1.3.6.1.4.1.45346.1.1.1			Compliance statement for all VeloCloud edge(vce) objects.
I32 vceCpuUtilPct30sec	1.3.6.1.4.1.45346.1.1.2.2.2.2	Integer32	read-only	The average CPU utilization percentage of the VeloCloud Edge in 30 seconds.
I32 vceCpuUtilPct5min	1.3.6.1.4.1.45346.1.1.2.2.2.1	Integer32	read-only	The average CPU utilization percentage of the VeloCloud Edge in 5 minutes.
vceEdgeObject	1.3.6.1.4.1.45346.1.1.2
vceHA	1.3.6.1.4.1.45346.1.1.2.1
I32 vceHaActiveLanItfNum	1.3.6.1.4.1.45346.1.1.2.1.2.4	Integer32	read-only	The total number of LAN interface on this active edge.
I32 vceHaActiveWanItfNum	1.3.6.1.4.1.45346.1.1.2.1.2.3	Integer32	read-only	The total number of WAN interface on this active edge.
VCE vceHaAdminState	1.3.6.1.4.1.45346.1.1.2.1.2.1	VceHaAdminStateType	read-only	The state of HA administration.
vceHaGroup	1.3.6.1.4.1.45346.1.1.2.1.1			Conformance group for vceHaGroup objects.
vceHAObject	1.3.6.1.4.1.45346.1.1.2.1.2
VCE vceHaPeerState	1.3.6.1.4.1.45346.1.1.2.1.2.2	VceHaPeerStateType	read-only	The state of HA peer.
I32 vceHaStanbyLanItfNum	1.3.6.1.4.1.45346.1.1.2.1.2.6	Integer32	read-only	The total number of LAN interface on stanby peer.
I32 vceHaStanbyWanItfNum	1.3.6.1.4.1.45346.1.1.2.1.2.5	Integer32	read-only	The total number of WAN interface on stanby peer.
vceHealth	1.3.6.1.4.1.45346.1.1.2.2
vceHealthGroup	1.3.6.1.4.1.45346.1.1.2.2.1			Conformance group for vceHealthGroup objects.
vceHealthObject	1.3.6.1.4.1.45346.1.1.2.2.2
vceLink	1.3.6.1.4.1.45346.1.1.2.3
vceLinkEntry	1.3.6.1.4.1.45346.1.1.2.3.2.2.1		not-accessible	An entry containing additional management information applicable to a particular link
vceLinkGroup	1.3.6.1.4.1.45346.1.1.2.3.1			Conformance group for vceLinkGroup objects.
NUM vceLinkIf	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.40	InterfaceIndex	read-only	Interface Index of the vceLink bounded interface.
UUI vceLinkIntId	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.2	UUID	not-accessible	A unique value, greater than zero, for each link.
STR vceLinkItf	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.33	DisplayString	read-only	Interface logic name of the link.
IP vceLinkLocalIp	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.30	InetAddress	read-only	Local IP address assigned.
IPt vceLinkLocalIpType	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.29	InetAddressType	read-only	Type of local IP address assigned.
I32 vceLinkMtu	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.32	Integer32	read-only	MTU set for the link.
STR vceLinkName	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.3	DisplayString	read-only	The textual name configured for the link.
IP vceLinkNextHop	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.42	InetAddress	read-only	The link Next Hop IP address.
IPt vceLinkNextHopType	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.41	InetAddressType	read-only	Type of the link Next Hop IP address.
I32 vceLinkNum	1.3.6.1.4.1.45346.1.1.2.3.2.1	Integer32	read-only	The total number of links presented on the VeloCloud Edge.
vceLinkObject	1.3.6.1.4.1.45346.1.1.2.3.2
IP vceLinkPublicIp	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.28	InetAddress	read-only	Public IP address of the link.
IPt vceLinkPublicIpType	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.27	InetAddressType	read-only	Type of public IP address of the link.
C64 vceLinkRxCtlBytes	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.19	Counter64	read-only	Total control bytes received.
C64 vceLinkRxCtlPkt	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.17	Counter64	read-only	Total control packets received.
C64 vceLinkRxJitter	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.21	Counter64	read-only	Total inbound jitter.
C64 vceLinkRxLatency	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.23	Counter64	read-only	Total inbound latency.
C64 vceLinkRxLostPkt	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.25	Counter64	read-only	Total inbound loss packets.
C64 vceLinkRxP1Bytes	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.7	Counter64	read-only	Total Bytes received through P1 link.
C64 vceLinkRxP1Pkt	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.5	Counter64	read-only	Total packets received through P1 link.
C64 vceLinkRxP2Bytes	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.11	Counter64	read-only	Total Bytes received through P2 link.
C64 vceLinkRxP2Pkt	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.9	Counter64	read-only	Total packets received through P2 link.
C64 vceLinkRxP3Bytes	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.15	Counter64	read-only	Total Bytes received through P3 link.
C64 vceLinkRxP3Pkt	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.13	Counter64	read-only	Total packets received through P3 link.
VCE vceLinkState	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.34	VceLinkStateType	read-only	State of the Link.
vceLinkTable	1.3.6.1.4.1.45346.1.1.2.3.2.2		not-accessible	A list of link entries. The number of entries is given by the value of vceLinkNum.
C64 vceLinkTotRxBytes	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.39	Counter64	read-only	Total bytes received.
C64 vceLinkTotRxPkts	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.37	Counter64	read-only	Total packets received.
C64 vceLinkTotTxbytes	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.38	Counter64	read-only	Total bytes transmitted.
C64 vceLinkTotTxPkts	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.36	Counter64	read-only	Total packets transmitted.
C64 vceLinkTxCtlBytes	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.18	Counter64	read-only	Total control bytes transmitted.
C64 vceLinkTxCtlPkt	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.16	Counter64	read-only	Total control packets transmitted.
C64 vceLinkTxJitter	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.20	Counter64	read-only	Total outbound jitter.
C64 vceLinkTxLatency	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.22	Counter64	read-only	Total outbound latency.
C64 vceLinkTxLostPkt	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.24	Counter64	read-only	Total outbound loss packets.
C64 vceLinkTxP1Bytes	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.6	Counter64	read-only	Total Bytes transmitted through P1 link.
C64 vceLinkTxP1PktEx	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.4	Counter64	read-only	Total packets transmitted through P1 link.
C64 vceLinkTxP2Bytes	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.10	Counter64	read-only	Total Bytes transmitted through P2 link.
C64 vceLinkTxP2Pkt	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.8	Counter64	read-only	Total packets transmitted through P2 link.
C64 vceLinkTxP3Bytes	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.14	Counter64	read-only	Total Bytes transmitted through P3 link.
C64 vceLinkTxP3Pkt	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.12	Counter64	read-only	Total packets transmitted through P3 link.
T/F vceLinkVeloSvcReachable	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.35	TruthValue	read-only	Reachability of the service state.
I32 vceLinkVlanId	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.31	Integer32	read-only	VLAN ID assigned.
VCE vceLinkVpnState	1.3.6.1.4.1.45346.1.1.2.3.2.2.1.26	VceLinkStateType	read-only	State of VPN connection.
I32 vceMemUsedPct	1.3.6.1.4.1.45346.1.1.2.2.2.3	Integer32	read-only	The total used memory percentage of the VeloCloud Edge.
vcePath	1.3.6.1.4.1.45346.1.1.2.4
vcePathEntry	1.3.6.1.4.1.45346.1.1.2.4.2.2.1		not-accessible	An entry containing additional management information applicable to a particular path
vcePathGroup	1.3.6.1.4.1.45346.1.1.2.4.1			Conformance group for vcePathGroup objects.
IP vcePathGwAddr	1.3.6.1.4.1.45346.1.1.2.4.2.2.1.5	InetAddress	not-accessible	The path gateway IP address.
IPt vcePathGwAddrType	1.3.6.1.4.1.45346.1.1.2.4.2.2.1.4	InetAddressType	not-accessible	Type of path gateway IP address.
UUI vcePathIfIntId	1.3.6.1.4.1.45346.1.1.2.4.2.2.1.1	UUID	not-accessible	A unique value, greater than zero, representing the internal id of the link used by the path.
IP vcePathIp	1.3.6.1.4.1.45346.1.1.2.4.2.2.1.3	InetAddress	read-only	The IP address of the path.
IPt vcePathIpType	1.3.6.1.4.1.45346.1.1.2.4.2.2.1.2	InetAddressType	read-only	Type of the path IP address.
I32 vcePathNum	1.3.6.1.4.1.45346.1.1.2.4.2.1	Integer32	read-only	The total number of path presented on the VeloCloud Edge.
vcePathObject	1.3.6.1.4.1.45346.1.1.2.4.2
STR vcePathPeerName	1.3.6.1.4.1.45346.1.1.2.4.2.2.1.6	DisplayString	read-only	The textual name configured for the path.
I32 vcePathRxAveLatency	1.3.6.1.4.1.45346.1.1.2.4.2.2.1.14	Integer32	read-only	The average inbound latency measured on the path.
C64 vcePathRxBytes	1.3.6.1.4.1.45346.1.1.2.4.2.2.1.15	Counter64	read-only	The total number of received bytes.
C64 vcePathRxJitter	1.3.6.1.4.1.45346.1.1.2.4.2.2.1.21	Counter64	read-only	Total inbound jitter.
C64 vcePathRxLostPkt	1.3.6.1.4.1.45346.1.1.2.4.2.2.1.17	Counter64	read-only	The Total number of lost inbound packets.
C64 vcePathRxPkt	1.3.6.1.4.1.45346.1.1.2.4.2.2.1.19	Counter64	read-only	Total number of received packets.
VCE vcePathRxState	1.3.6.1.4.1.45346.1.1.2.4.2.2.1.10	VcePathStateType	read-only	The receive state of the path.
VCE vcePathState	1.3.6.1.4.1.45346.1.1.2.4.2.2.1.7	VcePathStateType	read-only	The current state of the path.
vcePathTable	1.3.6.1.4.1.45346.1.1.2.4.2.2		not-accessible	A list of path entries. The number of entries is given by the value of vcePathNum.
VCE vcePathTunlMode	1.3.6.1.4.1.45346.1.1.2.4.2.2.1.12	VcePathTunlModeType	read-only	The mode type of the path tunnel.
I32 vcePathTxAveLatency	1.3.6.1.4.1.45346.1.1.2.4.2.2.1.13	Integer32	read-only	The average inbound latency measured on the path.
C64 vcePathTxBytes	1.3.6.1.4.1.45346.1.1.2.4.2.2.1.16	Counter64	read-only	The total number of transmitted bytes.
C64 vcePathTxJitter	1.3.6.1.4.1.45346.1.1.2.4.2.2.1.22	Counter64	read-only	Total outbound jitter.
C64 vcePathTxLostPkt	1.3.6.1.4.1.45346.1.1.2.4.2.2.1.18	Counter64	read-only	The total number of lost outbound packets.
C64 vcePathTxPkt	1.3.6.1.4.1.45346.1.1.2.4.2.2.1.20	Counter64	read-only	Total number of transmitted packets.
VCE vcePathTxState	1.3.6.1.4.1.45346.1.1.2.4.2.2.1.11	VcePathStateType	read-only	The transmit state of the path.
TIK vcePathUpTime	1.3.6.1.4.1.45346.1.1.2.4.2.2.1.8	TimeTicks	read-only	Total uptime of the path in miliseconds.

RFC description

Vendor-private MIB for VMware SD-WAN Edge devices, defines managed objects and traps for monitoring VeloCloud edge appliances. Requires SNMPv2-SMI, IF-MIB, and INET-ADDRESS-MIB imports.

Start monitoring VMware VeloCloud Edge SD-WAN appliances (HA failover/CPU-memory/per-link traffic status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download VELOCLOUD-EDGE-MIB