US-SRX-SIP-MIB

All MIBs › US-SRX-SIP-MIB

Organization: Siemens Network Convergence LLC

Last Updated: 2008-06-11

Category: VoIP and Telephony

Description: Manages Siemens SRX gateway SIP session statistics, registrations, and trunk performance.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is US-SRX-SIP-MIB?

US-SRX-SIP-MIB is a vendor-specific MIB whose MODULE-IDENTITY organization is Siemens Network Convergence LLC (part of Siemens Enterprise Communications' HiQ 8000 / SURPASS RTP softswitch platform), registered under the hiq8000Admin branch — despite the vendor field on this entry naming Juniper, the source module's copyright, organization, and IMPORTS (SURPASS-RTP-MIB, HIQ-ADMIN-MIB) confirm it is a Siemens SIP Signal Manager MIB unrelated to Juniper's SRX security appliances, a naming coincidence worth flagging. It defines usSrxSipConfigStatisticsData with per-message SIP performance counters (usSrxSipPerfInviteMsgsSentByClient, usSrxSipPerf100TryingMsgsRcvdByClient, usSrxSipPerf180RingingMsgsRcvdByClient, and similar counters for other SIP response codes) plus usSrxSipReasonMgmt for SIP reason-header management. This message-level counter granularity is useful for monitoring SIP call-signaling health on the softswitch — confirming that INVITE requests are being answered with expected provisional and final responses rather than timing out. It depends on the vendor's FSC-RTP-MIB, SURPASS-RTP-MIB, SURPASS-RTP-ADMIN-MIB, and HIQ-ADMIN-MIB for shared types and its OID root, and is deployed on Siemens HiQ 8000/SURPASS RTP SIP softswitch platforms; administrators can download the US-SRX-SIP-MIB file to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in US-SRX-SIP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Siemens HiQ 8000 / SURPASS RTP SIP softswitch platform

Monitoring Examples

An operator polls usSrxSipPerfInviteMsgsSentByClient alongside usSrxSipPerf180RingingMsgsRcvdByClient over a polling interval to compute a ringing-response ratio for outbound SIP calls; a sustained drop in that ratio while INVITE volume stays constant would indicate downstream SIP endpoints are failing to respond, pointing to a signaling or trunk-side problem.

What Can Be Monitored

INVITE messages sent by SIP client
provisional response counters (100 Trying, 180 Ringing)
SIP reason-header management objects
per-message-type SIP performance statistics

Imported Objects

From FSC-RTP-MIB

Boolean
TimeStampSeconds

From HIQ-ADMIN-MIB

SrxRowCountType

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus

From SURPASS-RTP-ADMIN-MIB

hiq8000Admin

OBJECT-IDENTITY

From SURPASS-RTP-MIB

surpassRtp

MODULE-IDENTITY

How to Use in IPNetwork Monitor

Example using usSrxSipPerfInviteMsgsSentByClient OID:

Select a Siemens HiQ 8000 / SURPASS RTP SIP softswitch platform (per-message SIP response-code counter status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type usSrxSipPerfInviteMsgsSentByClient into the Find box to locate it in the OID tree, then select it and click OK. This value identifies the count of Invite messages sent from Client. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if the count changes from its expected baseline, since that would indicate the underlying set of items changed unexpectedly. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
usSrxSip	1.3.6.1.4.1.4329.2.18.2.2.1.2			SRX SIP MIB module which manages the SIP Signal Manager
usSrxSipObjects	1.3.6.1.4.1.4329.2.18.2.2.1.2.1
usSrxSipConfigStatisticsData	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1
I32 usSrxSipPerfInviteMsgsSentByClientEx	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.1	Integer32	read-only	This value identifies the count of Invite messages sent from Client.
I32 usSrxSipPerf100TryingMsgsRcvdByClient	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.2	Integer32	read-only	This value identifies the 100 Trying messages Received by the SIP Client.
I32 usSrxSipPerf180RingingMsgsRcvdByClient	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.3	Integer32	read-only	This value identifies the 180 Ringing messages Received by the SIP Client.
I32 usSrxSipPerf200OKForInviteMsgsRcvdByClient	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.4	Integer32	read-only	This value identifies the 200 OK for Invite messages Received by the SIP Client.
I32 usSrxSipPerf301MsgsRcvdByClient	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.5	Integer32	read-only	This value identifies the 301 (Moved Permanently) messages Received by the SIP Client.
I32 usSrxSipPerf302MsgsRcvdByClient	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.6	Integer32	read-only	This value identifies the 302 (Moved Temporarily) messages Received by the SIP Client.
I32 usSrxSipPerfAckForInviteMsgsSentByClient	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.7	Integer32	read-only	This value identifies the Ack for Invite messages sent by the SIP Client.
I32 usSrxSipPerfAckForErrorMsgsSentByClient	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.8	Integer32	read-only	This value identifies the Ack For Error messages sent by the SIP Client.
I32 usSrxSipPerfErrorMsgsRcvdByClient	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.9	Integer32	read-only	This value identifies the Error messages Received by the SIP Client.
I32 usSrxSipPerfByeMsgsSentByClient	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.10	Integer32	read-only	This value identifies the Bye messages Sent by the SIP Client.
I32 usSrxSipPerf200OKForByeMsgsRcvdByClient	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.11	Integer32	read-only	This value identifies the 200 OK for Bye messages Received by the SIP Client.
I32 usSrxSipPerfCancelMsgsSentByClient	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.12	Integer32	read-only	This value identifies the Cancel messages Sent by the SIP Client.
I32 usSrxSipPerf200OKforCancelMsgsRecvdByClient	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.13	Integer32	read-only	This value identifies the 200 OK for Cancel messages Received by the SIP Client.
I32 usSrxSipPerf487MsgsRcvdByClient	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.14	Integer32	read-only	This value identifies the 487 (Request Terminated) messages Received by the SIP Client.
I32 usSrxSipPerfAckForCancelMsgsSentByClient	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.15	Integer32	read-only	This value identifies the Ack For Cancel messages Sent by the SIP Client.
I32 usSrxSipPerf200OKforRegisterMsgsSentByServer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.16	Integer32	read-only	This value identifies the 200 OK for Register messages Sent by the SIP Server.
I32 usSrxSipPerfRegisterMsgsReceivedByServer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.17	Integer32	read-only	This value identifies the Register messages Received by the SIP Server.
I32 usSrxSipPerf100TryingMsgsSentByServer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.18	Integer32	read-only	This value identifies the 100 Trying messages Sent by the SIP Server.
I32 usSrxSipPerfInviteMsgsRecdByServer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.19	Integer32	read-only	This value identifies the Invite messages Received by the SIP Server.
I32 usSrxSipPerf180RingingMsgsSentByServer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.20	Integer32	read-only	This value identifies the 180 Ringing messages Sent by the SIP Server.
I32 usSrxSipPerf200OKforInviteMsgsSentByServer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.21	Integer32	read-only	This value identifies the 200 OK for Invite messages Sent by the SIP Server.
I32 usSrxSipPerfAckforInviteMsgsRecdByServer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.22	Integer32	read-only	This value identifies the for Ack for INVITE messages Received by the hiQ.
I32 usSrxSipPerfErrorMsgsSentByServer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.23	Integer32	read-only	This value identifies the Error messages Sent by the SIP Server.
I32 usSrxSipPerfAckForErrorMsgsRecdByServer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.24	Integer32	read-only	This value identifies the Ack for Error messages Received by the SIP Server.
I32 usSrxSipPerf200OKforByeMsgsSentByServer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.25	Integer32	read-only	This value identifies the 200 OK for Bye messages Sent by the SIP Server.
I32 usSrxSipPerfByeMsgsRecdByServer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.26	Integer32	read-only	This value identifies the Bye messages Received by the SIP Server.
I32 usSrxSipPerf200OKforCancelMsgsSentByServer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.27	Integer32	read-only	This value identifies the 200 OK for Cancel messages Sent by the SIP Server.
I32 usSrxSipPerfCancelMsgsRecdByServer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.28	Integer32	read-only	This value identifies the Cancel messages Received by the SIP Server.
I32 usSrxSipPerf487MsgsSentByServer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.29	Integer32	read-only	This value identifies the 487 (Connection Terminated) messages Sent by the SIP Server.
I32 usSrxSipPerfAckforCancelMsgsRecdByServer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.30	Integer32	read-only	This value identifies the ACK for Cancel messages Received by the SIP Server.
I32 usSrxSipPerfUACSntRefer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.31	Integer32	read-only	This value identifies the REFER messages Sent by the SIP Client.
I32 usSrxSipPerfUACRcv202Accepted	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.32	Integer32	read-only	This value identifies the 202 ACCEPTED messages Received by the SIP Client.
I32 usSrxSipPerfUACRcv4xx6xxRefer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.33	Integer32	read-only	This value identifies the 4xx-6xx for REFER messages Received by the SIP Client.
I32 usSrxSipPerfUACSntNotify	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.34	Integer32	read-only	This value identifies the NOTIFY messages Sent by the SIP Client.
I32 usSrxSipPerfUACRcv200OKNotify	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.35	Integer32	read-only	This value identifies the 200OK for NOTIFY messages Received by the SIP Client.
I32 usSrxSipPerfUACRcv4xx6xxNotify	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.36	Integer32	read-only	This value identifies the 4xx-6xx for NOTIFY messages Received by the SIP Client.
I32 usSrxSipPerfUACSntSubscribe	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.37	Integer32	read-only	This value identifies the SUBSCRIBE messages Sent by the SIP Client.
I32 usSrxSipPerfUACRcv200OKSubs	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.38	Integer32	read-only	This value identifies the 200OK for SUBSCRIBE messages Received by the SIP Client.
I32 usSrxSipPerfUACRcv4xx6xxSubs	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.39	Integer32	read-only	This value identifies the 4xx-6xx for SUBSCRIBE messages Received by the SIP Client.
I32 usSrxSipPerfUACSntInfo	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.40	Integer32	read-only	This value identifies the INFO messages Sent by the SIP Client.
I32 usSrxSipPerfUACRcv200OKInfo	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.41	Integer32	read-only	This value identifies the 200OK for INFO messages Received by the SIP Client.
I32 usSrxSipPerfUACRcv300Multiple	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.42	Integer32	read-only	This value identifies the 300 MULTIPLE CHOICES messages Received by the SIP Client.
I32 usSrxSipPerfUASRcvRefer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.43	Integer32	read-only	This value identifies the REFER messages Received by the SIP Server.
I32 usSrxSipPerfUASSnt202Accepted	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.44	Integer32	read-only	This value identifies the 202 ACCEPTED messages Sent by the SIP Server.
I32 usSrxSipPerfUASSnt4xx6xxRefer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.45	Integer32	read-only	This value identifies the 4xx-6xx for REFER messages Sent by the SIP Server.
I32 usSrxSipPerfUASRcvNotify	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.46	Integer32	read-only	This value identifies the NOTIFY messages Received by the SIP Server.
I32 usSrxSipPerfUASSnt200OKNotify	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.47	Integer32	read-only	This value identifies the 200OK for NOTIFY messages Sent by the SIP Server.
I32 usSrxSipPerfUASSnt4xx6xxNotify	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.48	Integer32	read-only	This value identifies the 4xx-6xx for NOTIFY messages Sent by the SIP Server.
I32 usSrxSipPerfUASRcvSubscribe	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.49	Integer32	read-only	This value identifies the SUBSCRIBE messages Received by the SIP Server.
I32 usSrxSipPerfUASSnt200OKSubs	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.50	Integer32	read-only	This value identifies the 200OK for SUBSCRIBE messages Sent by the SIP Server.
I32 usSrxSipPerfUASSnt4xx6xxSubs	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.51	Integer32	read-only	This value identifies the 4xx-6xx for SUBSCRIBE messages Sent by the SIP Server.
I32 usSrxSipPerfUASRcvInfo	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.52	Integer32	read-only	This value identifies the INFO messages Received by the SIP Server.
I32 usSrxSipPerfUASSnt200OKInfo	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.53	Integer32	read-only	This value identifies the 200OK for INFO messages Sent by the SIP Server.
I32 usSrxSipPerf183MsgRcvByClient	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.54	Integer32	read-only	This value identifies the total 183 messages received.
I32 usSrxSipPerf1xxMsgRcvByClient	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.55	Integer32	read-only	This value identifies the rest of supported 1xx messages received.
I32 usSrxSipPerf2xxMsgRcvByClient	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.56	Integer32	read-only	This value identifies the rest of supported 2xx messages received.
I32 usSrxSipPerf3xxMsgRcvByClient	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.57	Integer32	read-only	This value identifies the rest of supported 3xx messages received.
I32 usSrxSipPerf4xxMsgRcvByClient	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.58	Integer32	read-only	This value identifies the rest of supported 4xx messages received.
I32 usSrxSipPerf5xxMsgRcvByClient	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.59	Integer32	read-only	This value identifies the rest of supported 5xx messages received.
I32 usSrxSipPerf6xxMsgRcvByClient	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.60	Integer32	read-only	This value identifies the rest of supported 6xx messages received.
I32 usSrxSipPerf183MsgSentByServer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.61	Integer32	read-only	This value identifies the total 183 messages sent.
I32 usSrxSipPerf1xxMsgSentByServer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.62	Integer32	read-only	This value identifies the rest of supported 1xx messages sent.
I32 usSrxSipPerf2xxMsgSentByServer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.63	Integer32	read-only	This value identifies the rest of supported 2xx messages sent.
I32 usSrxSipPerf3xxMsgSentByServer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.64	Integer32	read-only	This value identifies the rest of supported 3xx messages sent.
I32 usSrxSipPerf4xxMsgSentByServer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.65	Integer32	read-only	This value identifies the rest of supported 4xx messages sent.
I32 usSrxSipPerf5xxMsgSentByServer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.66	Integer32	read-only	This value identifies the rest of supported 5xx messages sent.
I32 usSrxSipPerf6xxMsgSentByServer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.67	Integer32	read-only	This value identifies the rest of supported 6xx messages sent.
I32 usSrxSipPerfNoSupportRcvByClient	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.68	Integer32	read-only	This value identifies the number of unsupported messages received.
I32 usSrxSipPrackMsgRcvByClient	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.69	Integer32	read-only	This value identifies the PRACK messages received.
I32 usSrxSipUpdateMsgRcvByClient	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.70	Integer32	read-only	This value identifies the Update messages received.
I32 usSrxSipPrackMsgSentByServer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.71	Integer32	read-only	This value identifies the PRACK messages sent.
I32 usSrxSipUpdateMsgSentByServer	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.72	Integer32	read-only	This value identifies the Update messages sent.
I32 usSrxSip200OKForPrackRcvByServ	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.73	Integer32	read-only	This value identifies the 200OKs received for PRACK messages.
I32 usSrxSip200OKForUpdateRcvByServ	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.74	Integer32	read-only	This value identifies the 200OKs received for Update messages.
I32 usSrxSip200OKForPrackSentByCli	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.75	Integer32	read-only	This value identifies the 200OKs sent for PRACK messages.
I32 usSrxSip200OKForUpdateSentByCli	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.76	Integer32	read-only	This value identifies the 200OKs sent for Update messages.
I32 usSrxSipAckFor3xxSentByClient	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.1.77	Integer32	read-only	This value identifies the Acks sent in response to 3xx messages.
usSrxSipReasonMgmt	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.2
usSrxReasonTable	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.2.1		not-accessible	The usSrxReasonTable stores the information for the creation of Reason Header including causes for the SIP and Q.850 protocols, and also some predefined and user-defined ones. Restrictions: Reason Type \| Id \| Type \| Access \| Values \| Access \| Values -------------+-----------+------------+-------------+-------- Q.850 \| read-only \| 1..127 \| read-create \| 1 SIP \| read-only \| 300..699 \| read-create \| 2 Pre-defined \| read-only \| 1000..1999 \| read-create \| 3 User-defined \| read-only \| 2000... \| read-create \| 4 Reason Type \| Prim cause \| Prim text \| Access \| Values \| Access \| Values -------------+-------------+----------+------------+----------- Q.850 \| read-create \| =Id \| read-write \| 0-32 char SIP \| read-create \| =Id \| read-write \| 0-32 char Pre-defined \| read-write \| 300..699 \| read-write \| 0-32 char User-defined \| read-write \| 300..699 \| read-write \| 0-32 char Reason Type \| Sec cause \| Sec text \| Access \| Values \| Access \| Values -------------+------------+--------+------------+------------------------------------ Q.850 \| read-write \| >=0 \| read-write \| (SecCause!=0)?(0-32 char):(0 char) SIP \| read-write \| >=0 \| read-write \| (SecCause!=0)?(0-32 char):(0 char) Pre-defined \| read-write \| >=0 \| read-write \| (SecCause!=0)?(0-32 char):(0 char) User-defined \| read-write \| >=0 \| read-write \| (SecCause!=0)?(0-32 char):(0 char)
usSrxReasonEntry	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.2.1.1		not-accessible	An entry in the usSrxReasonTable.
I32 usSrxReasonId	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.2.1.1.1	Integer32	read-only	A unique, non-reusable index assigned when a reason is created.
INT usSrxReasonType	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.2.1.1.2	INTEGER	read-create	An integer variable identifying the reason type
I32 usSrxReasonPrimaryCause	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.2.1.1.3	Integer32	read-create	The primary cause for the reason entry.
STR usSrxReasonPrimaryText	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.2.1.1.4	DisplayString	read-create	The text associated with the primary cause.
I32 usSrxReasonSecondaryCause	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.2.1.1.5	Integer32	read-create	The secondary cause for the reason entry.
STR usSrxReasonSecondaryText	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.2.1.1.6	DisplayString	read-create	The text associated with the secondary cause.
SRX usSrxReasonInterceptCount	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.2.1.1.7	SrxRowCountType	read-only	The usSrxReasonInterceptCount is a scalar object that returns the total number intercepts associated to the reason entry. This value equals the number of rows in usSrxReasonInterceptTable with the same usSrxReasonId as this entry.
ROW usSrxReasonRowStatus	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.2.1.1.8	RowStatus	read-create	The status of this row of the table. - `active' (1), which indicates that the conceptual row is available for use by the system; - `createAndGo' (4), which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the system; - `destroy' (6), which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. The only two values which are expected to be received by the access routines for Siemens Network Convergence LLC are 'createAndGo' to create a new instance, and 'destroy' to delete an existing instance.
SRX usSrxReasonTableRowCount	1.3.6.1.4.1.4329.2.18.2.2.1.2.1.2.2	SrxRowCountType	read-only	The usSrxReasonTableRowCount is a scalar object that returns the total number of reason entries.

RFC description

Juniper SRX series vendor-private MIB for SIP (Session Initiation Protocol) call statistics and session management on security appliances.

Start monitoring Siemens HiQ 8000 / SURPASS RTP SIP softswitch platform (per-message SIP response-code counter status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download US-SRX-SIP-MIB