ZHNVOICE

All MIBs › ZHNVOICE

Organization: Zhone Technologies, Inc.

Last Updated: 2012-07-23

Category: VoIP and Telephony

Description: Manages Zhone Technologies VoIP configuration including SIP accounts, codec selection, and call features.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ZHNVOICE?

ZHNVOICE defines private enterprise MIB extensions from Zhone Technologies for the VoIP functionality of Zhone CPE devices, covering SIP account provisioning, codec selection, and call-feature configuration. It exposes categories of data related to SIP registration/account settings, voice codec preferences, and telephony feature configuration on the device's voice ports. From a monitoring standpoint it primarily supports software/service status checks -- confirming SIP registration state and active call/codec configuration -- which functions as a proxy for whether the voice service on the CPE is operating correctly rather than exposing classic hardware sensors. It builds conceptually on standard SIP and VoIP conventions even though implemented as a proprietary object set. It is typically deployed by broadband/VoIP service providers managing Zhone integrated access devices delivering residential or business telephone service over IP. Engineers can download the ZHNVOICE file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ZHNVOICE. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Zhone Technologies VoIP CPE / integrated access device

Monitoring Examples

An operator would check SIP account registration status and configured codec settings on a Zhone VoIP CPE to confirm the device successfully registered with the SIP proxy and negotiated the expected audio codec. A registration failure or unexpected codec fallback (e.g., to a lower-quality codec) would surface as a service-quality complaint traceable through these objects.

What Can Be Monitored

SIP account registration status
configured voice codec
call feature configuration
voice port status

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

From Zhone

zhoneWtn

OBJECT-IDENTITY

From Zhone-TC

ZhoneRowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
zhnVoice	1.3.6.1.4.1.5504.2.5.40			This file defines the private Enterprise MIB extensions that define voice related objects supported by the Zhone VoIP CPEs.
zhnVoiceNotifications	1.3.6.1.4.1.5504.2.5.40.0
NTF voiceRegistrationUp	1.3.6.1.4.1.5504.2.5.40.0.1			This notification is generated when the Voice Client has successfully registered with the configured Call Agent.
NTF voiceRegistrationDown	1.3.6.1.4.1.5504.2.5.40.0.2			This notification is generated when the Voice Client registration with the configured Call Agent fails.
zhnVoiceServiceObjects	1.3.6.1.4.1.5504.2.5.40.1
voiceServiceTable	1.3.6.1.4.1.5504.2.5.40.1.1		not-accessible	Table of voice services, including voice profiles, capabilities, and physical interfaces
voiceServiceEntry	1.3.6.1.4.1.5504.2.5.40.1.1.1		not-accessible	Table of voice services including voice profiles, capabilities, and physical interfaces
U32 voiceProfileNumberOfEntries	1.3.6.1.4.1.5504.2.5.40.1.1.1.1	Unsigned32	read-only	Voice Service Index
OCT voiceBoundIfName	1.3.6.1.4.1.5504.2.5.40.1.1.1.2	OCTET STRING	read-write	Name of the network interface that the voice service should run on. For example, brvlan300.
IP voiceBoundIpAddr	1.3.6.1.4.1.5504.2.5.40.1.1.1.3	IpAddress	read-only	IP address of the network interface that the bound interface is configured for.
U32 voiceServiceIndex	1.3.6.1.4.1.5504.2.5.40.1.1.1.4	Unsigned32	read-only	Voice Service Index
capabilities	1.3.6.1.4.1.5504.2.5.40.1.2
capabilitiesTable	1.3.6.1.4.1.5504.2.5.40.1.2.1		not-accessible	Table of voice service capabilities
capabilitiesEntry	1.3.6.1.4.1.5504.2.5.40.1.2.1.1		not-accessible	Table of voice service capabilities
U32 maxProfileCount	1.3.6.1.4.1.5504.2.5.40.1.2.1.1.1	Unsigned32	read-only	Maximum total number of distinct voice profiles supported.
U32 maxLineCount	1.3.6.1.4.1.5504.2.5.40.1.2.1.1.2	Unsigned32	read-only	Maximum total number of lines supported across all profiles. This parameter is applicable only for a VoIP endpoint.
U32 maxSessionsPerLine	1.3.6.1.4.1.5504.2.5.40.1.2.1.1.3	Unsigned32	read-only	Maximum number of voice sessions supported for any given line across all profiles. A value greater than one indicates support for CPE provided conference calling. This parameter is applicable only for a VoIP endpoint.
U32 maxSessionCount	1.3.6.1.4.1.5504.2.5.40.1.2.1.1.4	Unsigned32	read-only	Maximum total number of voice sessions supported across all lines and profiles. This might differ from MaxLineCount if each line can support more than one session for CPE provided conference calling. This value MAY be less than the product of maxLineCount and maxSessionsPerLine.
OCT signalingProtocols	1.3.6.1.4.1.5504.2.5.40.1.2.1.1.5	OCTET STRING	read-only	Comma-separated list of signaling protocols supported. Each item is an enumeration of: SIP MGCP MGCP-NCS H.248 H.323 Each entry MAY be appended with a version indicator in the form protocol/X.Y. For example: SIP/2.0
OCT regions	1.3.6.1.4.1.5504.2.5.40.1.2.1.1.6	OCTET STRING	read-only	Comma-separated list of geographic regions supported by the CPE. Each item in the list MUST be an alpha-2 (two-character alphabetic) country code as specified by ISO 3166. An empty list indicates that the CPE does not support region-based customization via the Region parameter in the VoiceService.{i}.VoiceProfile.{i} object.
T/F rtcp	1.3.6.1.4.1.5504.2.5.40.1.2.1.1.7	TruthValue	read-only	Support for RTCP. A true value indicates support for the object VoiceService.{i}.VoiceProfile.{i}.RTP.RTCP. This parameter is applicable only for a VoIP endpoint.
T/F srtp	1.3.6.1.4.1.5504.2.5.40.1.2.1.1.8	TruthValue	read-only	Support for SRTP. A true value indicates support for the object VoiceService.{i}.VoiceProfile.{i}.RTP.SRTP. This parameter is applicable only for a VoIP endpoint.
T/F rtpRedundancy	1.3.6.1.4.1.5504.2.5.40.1.2.1.1.9	TruthValue	read-only	Support for RTP payload redundancy as defined in RFC 2198. A true value indicates support for VoiceService.{i}.VoiceProfile.{i}.RTP.Redundancy. This parameter is applicable only for a VoIP endpoint.
T/F dscpCoupled	1.3.6.1.4.1.5504.2.5.40.1.2.1.1.10	TruthValue	read-only	A true value indicates that the CPE is constrained such that transmitted call control packets use the same DSCP marking as transmitted RTP packets. If the value is true, the CPE MUST NOT support the DSCPMark parameter for call control. This parameter is applicable only for a VoIP endpoint.
T/F ethernetTaggingCoupled	1.3.6.1.4.1.5504.2.5.40.1.2.1.1.11	TruthValue	read-only	A true value indicates that the CPE is constrained such that transmitted call control packets use the same Ethernet tagging (VLAN ID Ethernet Priority) as transmitted RTP packets. If the value is true, the CPE MUST NOT support the VLANIDMark or EthernetPriorityMark parameters within a call control object (e.g., SIP, MGCP, or H323). This parameter is applicable only for a VoIP endpoint.
T/F pstnSoftSwitchOver	1.3.6.1.4.1.5504.2.5.40.1.2.1.1.12	TruthValue	read-only	A true value indicates the CPE is capable of supporting the PSO_Activate Facility Action, which allows a call to be switched to a PSTN FXO (Foreign eXchange Office) line. This parameter is applicable only for a VoIP endpoint.
T/F faxT38	1.3.6.1.4.1.5504.2.5.40.1.2.1.1.13	TruthValue	read-only	Support for T.38 fax. A true value indicates support for the object VoiceService.{i}.VoiceProfile.{i}.FaxT38. This parameter is applicable only for a VoIP endpoint.
T/F faxPassThrough	1.3.6.1.4.1.5504.2.5.40.1.2.1.1.14	TruthValue	read-only	Support for fax pass-through. A true value indicates support for the parameter VoiceService.{i}.VoiceProfile.{i}.FaxPassThrough. This parameter is applicable only for a VoIP endpoint.
T/F modemPassThrough	1.3.6.1.4.1.5504.2.5.40.1.2.1.1.15	TruthValue	read-only	Support for modem pass-through. A true value indicates support for the parameter VoiceService.{i}.VoiceProfile.{i}.ModemPassThrough. This parameter is applicable only for a VoIP endpoint.
T/F toneGeneration	1.3.6.1.4.1.5504.2.5.40.1.2.1.1.16	TruthValue	read-only	Support for tone generation. A true value indicates support for the object VoiceService.{i}.VoiceProfile.{i}.Tone. A true value also indicates that the ToneDescriptionsEditable, PatternBasedToneGeneration, and FileBasedToneGeneration parameters in this object are present. This parameter is applicable only for a VoIP endpoint.
T/F ringGeneration	1.3.6.1.4.1.5504.2.5.40.1.2.1.1.17	TruthValue	read-only	Support for ring generation. A true value indicates support for control of ring generation via the VoiceService.{i}.VoiceProfile.{i}.Line.{i}.Ringer object. A true value also indicates that the RingDescriptionsEditable, PatternBasedRingGeneration, and FileBasedRingGeneration parameters in this object are present. This parameter is applicable only for a VoIP endpoint.
T/F digitMapCapabilities	1.3.6.1.4.1.5504.2.5.40.1.2.1.1.18	TruthValue	read-only	Support for a configurable digit map string. A true value indicates full support for the VoiceService.{i}.VoiceProfile.{i}.DigitMap parameter.
T/F numberingPlan	1.3.6.1.4.1.5504.2.5.40.1.2.1.1.19	TruthValue	read-only	Support for a configurable numbering plan. A true value indicates support for a configurable numbering plan via the VoiceService.{i}.VoiceProfile.{i}. NumberingPlan object. This parameter is applicable only for a VoIP endpoint.
T/F buttonMap	1.3.6.1.4.1.5504.2.5.40.1.2.1.1.20	TruthValue	read-only	Support for a configurable button map. A true value indicates support for a configurable button map via the VoiceService.{i}.VoiceProfile.{i}.ButtonMap NumberingPlan object. This parameter is applicable only for a VoIP endpoint.
T/F voicePortTests	1.3.6.1.4.1.5504.2.5.40.1.2.1.1.21	TruthValue	read-only	Support for remotely accessible voice-port tests. A true value indicates support for the VoiceService.{i}.PhyInterface.{i}.Tests object. This parameter is applicable only for a VoIP endpoint.
capabilitiesSIPTable	1.3.6.1.4.1.5504.2.5.40.1.2.2		not-accessible	Table of SIP-specific capabilities. Applicable only if SIP is among the list of supported protocols.
capabilitiesSIPEntry	1.3.6.1.4.1.5504.2.5.40.1.2.2.1		not-accessible	Table of SIP-specific capabilities. Applicable only if SIP is among the list of supported protocols.
OCT role	1.3.6.1.4.1.5504.2.5.40.1.2.2.1.1	OCTET STRING	read-only	The role of this VoIP CPE. Enumeration of: UserAgent BackToBackUserAgents OutboundProxy. A single VoiceService instance MUST have only one role. If a device includes the capabilities for more than one role, each role MUST be represented as separate VoiceService instance.
OCT extensionsSIP	1.3.6.1.4.1.5504.2.5.40.1.2.2.1.2	OCTET STRING	read-only	Comma-separated list of SIP extension methods supported. SIP extension methods MUST be in the form of the method name in upper case. The list MAY include vendor-specific extensions, which MUST use the format defined in TR-106. Examples: REFER INFO X_EXAMPLE-COM_MyExt
OCT transports	1.3.6.1.4.1.5504.2.5.40.1.2.2.1.3	OCTET STRING	read-only	Comma-separated list of SIP transport protocols supported. Each entry is an enumeration of: UDP TCP TLS SCTP The list MAY include vendor-specific transports, which MUST use the format defined in TR-106
OCT uriSchemes	1.3.6.1.4.1.5504.2.5.40.1.2.2.1.4	OCTET STRING	read-only	Comma-separated list of URI schemes supported beyond the URI schemes required by the SIP specification. Each URI scheme is given by the URI prefix, without the colon separator. Example: tel, fax
T/F eventSubscription	1.3.6.1.4.1.5504.2.5.40.1.2.2.1.5	TruthValue	read-only	Support for SIP event subscription. A true value indicates support for the VoiceService.{i}.VoiceProfile.{i}.SIP.EventSubscribe and VoiceService.{i}.VoiceProfile.{i}.Line.{i}.SIP.EventSubscribe.{i} objects.
T/F responseMap	1.3.6.1.4.1.5504.2.5.40.1.2.2.1.6	TruthValue	read-only	Support for SIP response map. A true value indicates support for the VoiceService.{i}.VoiceProfile.{i}.SIP.ResponseMap object. This parameter is applicable only for a VoIP endpoint.
OCT tlsKeyExchangeProtocols	1.3.6.1.4.1.5504.2.5.40.1.2.2.1.7	OCTET STRING	read-only	Comma-separated list of authentication protocols supported for TLS transport. Each item listed is an enumeration of: RSA DSS The list MAY include vendor-specific protocols, which MUST use the format defined in TR-106. Support for this parameter is applicable only if the Transports parameter in this object includes the value TLS and the TLSEncryptionProtocols parameter in this object is present and non-empty and includes at least one value other than Null
capabilitiesMGCPTable	1.3.6.1.4.1.5504.2.5.40.1.2.3		not-accessible	Table of MGCP-specific capabilities. Applicable only if MGCP is among the list of supported protocols.
capabilitiesMGCPEntry	1.3.6.1.4.1.5504.2.5.40.1.2.3.1		not-accessible	Table of MGCP-specific capabilities. Applicable only if MGCP is among the list of supported protocols.
OCT extensionsMGCP	1.3.6.1.4.1.5504.2.5.40.1.2.3.1.1	OCTET STRING	read-only	Comma-separated list of MGCP extension methods supported. MGCP extension methods MUST be in the form of the method name in upper case. The list MAY include vendor-specific extensions, which MUST use the format defined in TR-106. Examples: REFER INFO X_EXAMPLE-COM_MyExt
capabilitiesCodecsTable	1.3.6.1.4.1.5504.2.5.40.1.2.4		not-accessible	Table to describe the set of supported codecs. Each entry refers to a distinct combination of codec and bit rate. The table MUST include a distinct entry for each supported combination of these parameters. Applicable only for a VoIP endpoint.
capabilitiesCodecsEntry	1.3.6.1.4.1.5504.2.5.40.1.2.4.1		not-accessible	The Codecs Service table MUST include a distinct entry for each supported combination of these parameters.
U32 codecIndex	1.3.6.1.4.1.5504.2.5.40.1.2.4.1.1	Unsigned32	read-only	Codecs table index
U32 entryID	1.3.6.1.4.1.5504.2.5.40.1.2.4.1.2	Unsigned32	read-only	Codecs table index
OCT codec	1.3.6.1.4.1.5504.2.5.40.1.2.4.1.3	OCTET STRING	read-only	Identifier of the type of codec. Enumeration of: G.711MuLaw G.711ALaw G.726 G.729 G.729a G.729e G.728 G.723.1 G.722 G.722.1 G.722.2 GSM-FR GSM-HR GSM-EFR iLBC The parameter MAY instead be a vendor-specific codec, which MUST be in the format defined in TR-106. For example: X_EXAMPLE-COM_MyCodec
U32 bitRate	1.3.6.1.4.1.5504.2.5.40.1.2.4.1.4	Unsigned32	read-only	Bit rate, in bits per second. The value MUST be among the values appropriate for the specified codec.
OCT packetizationPeriod	1.3.6.1.4.1.5504.2.5.40.1.2.4.1.5	OCTET STRING	read-only	Comma-separate list of supported packetization periods, in milliseconds, or continuous ranges of packetization periods. Ranges are indicated as a hyphen-separated pair of unsigned integers. Examples: 20 indicates a single discrete value 10, 20, 30 indicates a set of discrete values. 5-40 indicates a continuous inclusive range. 5-10, 20, 30 indicates a continuous range in addition to a set of discrete values. A range MUST only be indicated if all values within the range are supported.
T/F silenceSuppression	1.3.6.1.4.1.5504.2.5.40.1.2.4.1.6	TruthValue	read-only	Indicates support for silence suppression for this codec.
voiceProfiles	1.3.6.1.4.1.5504.2.5.40.1.3
voiceProfileTable	1.3.6.1.4.1.5504.2.5.40.1.3.1		not-accessible	Table of voice profile objects
voiceProfileEntry	1.3.6.1.4.1.5504.2.5.40.1.3.1.1		not-accessible	Object associated with a collection of voice lines with common characteristics. By default, a single VoiceProfile object SHOULD be present in a VoiceService, initially in the disabled state.
U32 voiceProfileIndex	1.3.6.1.4.1.5504.2.5.40.1.3.1.1.1	Unsigned32	read-only	Voice Profile Index
VOI voiceProfileEnable	1.3.6.1.4.1.5504.2.5.40.1.3.1.1.2	VoiceProfileLineStateType	read-write	Enables or disables all lines in this profile, or places it into a quiescent state. Enumeration of: Disabled Quiescent Enabled On creation, a profile MUST be in the Disabled state. In the Quiescent state, in-progress sessions remain intact, but no new sessions are allowed. Support for the Quiescent state in a CPE is optional. If this parameter is set to Quiescent in a CPE that does not support the Quiescent state, it MUST treat it the same as the Disabled state.
T/F voiceProfileReset	1.3.6.1.4.1.5504.2.5.40.1.3.1.1.3	TruthValue	read-write	When written as true, forces the all lines in this profile to be reset, causing it to re-initialize and perform all start-up actions such as registration. Always False when read.
U32 voiceProfileNumberOfLines	1.3.6.1.4.1.5504.2.5.40.1.3.1.1.4	Unsigned32	read-only	Number of instances of Line within this VoiceProfile. Applicable only for a VoIP endpoint.
OCT voiceProfileName	1.3.6.1.4.1.5504.2.5.40.1.3.1.1.5	OCTET STRING	read-write	Human-readable string to identify the profile instance.
OCT voiceProfileSignalingProtocol	1.3.6.1.4.1.5504.2.5.40.1.3.1.1.6	OCTET STRING	read-write	The protocol to be used for this profile. A single protocol selected from among the available protocols indicated in VoiceService.{i}.Capabilities.SignalingProtocols.
U32 voiceProfileMaxSessions	1.3.6.1.4.1.5504.2.5.40.1.3.1.1.7	Unsigned32	read-write	Limit on the number of simultaneous voice sessions across all lines in this profile. Must be less than or equal to VoiceService.{i}.Capabilities.MaxSessionCount. (This MAY be greater than the number of lines if each line can support more than one session, for example for CPE provided conference calling.)
DTM voiceProfileDtmfMethod	1.3.6.1.4.1.5504.2.5.40.1.3.1.1.8	DTMFMethodValues	read-write	Method by which DTMF digits MUST be passed. Enumeration of: InBand RFC2833 SIPInfo If the parameter dtmfMethodG711 is non-empty, then this parameter applies only when the current codec is not G.711. The value SIPInfo is applicable only if the SignalingProtocol is SIP. This parameter is applicable only for a VoIP endpoint.
DTM voiceProfileDtmfMethodG711	1.3.6.1.4.1.5504.2.5.40.1.3.1.1.9	DTMFMethodValues	read-write	Method by which DTMF digits MUST be passed if the current codec is G.711. Enumeration of: InBand RFC2833 SIPInfo An empty value for this parameter indicates that the value of the dtmfMethod parameter is to apply whether or not the current codec is G.711. The value SIPInfo is applicable only if the SignalingProtocol is SIP. This parameter is applicable only for a VoIP endpoint.
HOO voiceProfileHookFlashMethod	1.3.6.1.4.1.5504.2.5.40.1.3.1.1.10	HookFlashMethodValues	read-write	This object specifies which hookflash relay method to use. A value of None implies hook flash will be handled locally. A value of SIPInfo implies the hook flash will be sent via the SIP info.
REG voiceProfileRegion	1.3.6.1.4.1.5504.2.5.40.1.3.1.1.11	RegionValues	read-write	The geographic region associated with this profile. This MAY be used by the CPE to customize localization settings. The value MUST be either one value selected from among the available regions indicated in VoiceService.{i}.Capabilities.Regions, or MAY be empty. An empty value indicates that the region is unspecified and the CPE SHOULD use default localization settings. This parameter is applicable only if VoiceService.{i}.Capabilities.Regions is non-empty.
OCT voiceProfileDigitMap	1.3.6.1.4.1.5504.2.5.40.1.3.1.1.12	OCTET STRING	read-write	Digit map controlling the transmission of dialed digit information. The string defines the criteria to be met as digits are collected before an outgoing request (e.g., a SIP INVITE) can be initiated. The syntax of this parameter is exactly the syntax used by MGCP as defined in RFC3435, section 2.1.5. This parameter is applicable only if the device supports a dialing mechanism for which a dialing plan is needed (for example, a device with an explicit Dial button may not need to be aware of the dialing plan) and if the device does not already support a dialing plan mechanism for this profile (e.g. in-band via MGCP). If this object is supported, the capability VoiceService.{i}.Capabilities.DigitMap MUST be equal to true. Applicable only for a VoIP endpoint.
T/F voiceProfileDigitMapEnable	1.3.6.1.4.1.5504.2.5.40.1.3.1.1.13	TruthValue	read-write	Enables the use of the DigitMap parameter in this object. When enabled, the content of the VoiceService.{i}.VoiceProfile.{i}.NumberingPlan object, if present, MUST be ignored. This parameter is required if and only if both the digitMap object and the VoiceService.{i}.VoiceProfile.{i}.NumberingPlan object are present. Applicable only for a VoIP endpoint.
T/F voiceProfileStunEnable	1.3.6.1.4.1.5504.2.5.40.1.3.1.1.14	TruthValue	read-write	Enable or disable use of STUN to allow operation through NAT. Note: enabling STUN is to be interpreted as enabling the use of STUN for discovery, not use as a keep-alive mechanism.
OCT voiceProfileStunServer	1.3.6.1.4.1.5504.2.5.40.1.3.1.1.15	OCTET STRING	read-write	Domain name or IP address of the STUN server.
U32 voiceProfileStunServerPort	1.3.6.1.4.1.5504.2.5.40.1.3.1.1.16	Unsigned32	read-write	STUN server port number.
OCT voiceProfileLogServer	1.3.6.1.4.1.5504.2.5.40.1.3.1.1.17	OCTET STRING	read-write	Domain name or IP address of the Log server.
U32 voiceProfileLogServerPort	1.3.6.1.4.1.5504.2.5.40.1.3.1.1.18	Unsigned32	read-write	Log server port number.
U32 voiceProfileSpNum	1.3.6.1.4.1.5504.2.5.40.1.3.1.1.19	Unsigned32	read-write	Service Provider number.
T/F voiceProfileV18Support	1.3.6.1.4.1.5504.2.5.40.1.3.1.1.20	TruthValue	read-write	Enable or disable v18 support.
VOI voiceProfileSwitchType	1.3.6.1.4.1.5504.2.5.40.1.3.1.1.21	VoiceProfileSwitchTypes	read-write	Configure the VoIP Switch Type. Enumeration of: broadSoft(1), cirpack(2), genband(3), metaSwitch(4), nortel(5), networkOnly(6), taqua(7), softX3000(8), axtelCS2K(9), copperCom(10), openSer(11), utStarCom(12), ericsson(13), unknown(99)
voiceProfileServiceProviderTable	1.3.6.1.4.1.5504.2.5.40.1.3.2		not-accessible	Table of voice profile service provider objects
voiceProfileServiceProviderEntry	1.3.6.1.4.1.5504.2.5.40.1.3.2.1		not-accessible	Service provider objects associated with a specific voice profile.
OCT voiceProfileServiceProviderName	1.3.6.1.4.1.5504.2.5.40.1.3.2.1.1	OCTET STRING	read-only	Human-readable string identifying the service provider.
voiceProfileSIPTable	1.3.6.1.4.1.5504.2.5.40.1.3.3		not-accessible	Table of SIP objects for a specific voice profile
voiceProfileSIPEntry	1.3.6.1.4.1.5504.2.5.40.1.3.3.1		not-accessible	SIP objects associated with a specific voice profile.
OCT voiceProfileSIPProxyServer	1.3.6.1.4.1.5504.2.5.40.1.3.3.1.1	OCTET STRING	read-write	Host name or IP address of the SIP proxy server. All SIP signaling traffic MUST be sent to the host indicated by this parameter and the port indicated by the ProxyServerPort parameter unless OutboundProxy is non-empty or a different route was discovered during normal operations SIP routing operation. Regardless of which host the traffic gets sent to (the ProxyServer or the OutboundProxy), the value of this parameter MUST be used to derive the URI placed into the SIP Route header field of all requests originated by this end-point unless a different proxy host was discovered dynamically during normal SIP routing operations.
U32 voiceProfileSIPProxyServerPort	1.3.6.1.4.1.5504.2.5.40.1.3.3.1.2	Unsigned32	read-write	Destination port to be used in connecting to the SIP server.
VOI voiceProfileSIPProxyServerTransport	1.3.6.1.4.1.5504.2.5.40.1.3.3.1.3	VoiceTransportValues	read-write	Transport protocol to be used in connecting to the SIP server. Must be chosen from among the transports supported, as indicated by VoiceService.{i}.Capabilities.SIP.Transports. Enumeration of: UDP TCP TLS SCTP
OCT voiceProfileSIPRegistrarServer	1.3.6.1.4.1.5504.2.5.40.1.3.3.1.4	OCTET STRING	read-write	Host name or IP address of the SIP registrar server. If this parameter is empty, the CPE MUST obtain all of the registrar server configuration information, including host name or IP address, port, and transport protocol, from the corresponding Proxy Server parameters (ProxyServer, Proxy-ServerPort, and ProxyServerTransport), ignoring all of the registrar server parameters (Registrar-Server, RegistrarServerPort and RegistrarServer-Transport).
U32 voiceProfileSIPRegistrarServerPort	1.3.6.1.4.1.5504.2.5.40.1.3.3.1.5	Unsigned32	read-write	Destination port to be used in connecting to the SIP registrar server. If the RegistrarServer parameter is empty, the CPE MUST obtain all of the registrar server configuration information, including host name or IP address, port, and transport protocol, from the corresponding ProxyServer parameters (Proxy-Server, ProxyServerPort, and ProxyServer- Transport), ignoring all of the registrar server parameters (RegistrarServer, RegistrarServerPort and RegistrarServerTransport).
VOI voiceProfileSIPRegistrarServerTransport	1.3.6.1.4.1.5504.2.5.40.1.3.3.1.6	VoiceTransportValues	read-write	Transport protocol to be used in connecting to the registrar server. Must be chosen from among the transports supported, as indicated by VoiceService.{i}.Capabilities.SIP.Transports. Enumeration of: UDP TCP TLS SCTP If the RegistrarServer parameter is empty, the CPE MUST obtain all of the registrar server configuration information, including host name or IP address, port, and transport protocol, from the corresponding ProxyServer parameters (Proxy-Server, ProxyServerPort, and ProxyServer- Transport), ignoring all of the registrar server parameters (Registrar-Server, RegistrarServerPort and RegistrarServer-Transport).
T/F voiceProfileSIPToTagMatching	1.3.6.1.4.1.5504.2.5.40.1.3.3.1.7	TruthValue	read-write	Enable/Disable SIP to tag matching.
OCT voiceProfileSIPMusicServer	1.3.6.1.4.1.5504.2.5.40.1.3.3.1.8	OCTET STRING	read-write	Music server address.
U32 voiceProfileSIPMusicServerPort	1.3.6.1.4.1.5504.2.5.40.1.3.3.1.9	Unsigned32	read-write	Music server port number.
OCT voiceProfileSIPPlarGateway	1.3.6.1.4.1.5504.2.5.40.1.3.3.1.10	OCTET STRING	read-write	PLAR gateway address.
U32 voiceProfileSIPPlarPort	1.3.6.1.4.1.5504.2.5.40.1.3.3.1.11	Unsigned32	read-write	Plar gateway port number.
OCT voiceProfileSIPUserAgentDomain	1.3.6.1.4.1.5504.2.5.40.1.3.3.1.12	OCTET STRING	read-write	CPE domain string. If empty, the CPE SHOULD se its IP address as the domain.
U32 voiceProfileSIPUserAgentPort	1.3.6.1.4.1.5504.2.5.40.1.3.3.1.13	Unsigned32	read-write	Port used for incoming call control signaling.
VOI voiceProfileSIPUserAgentTransport	1.3.6.1.4.1.5504.2.5.40.1.3.3.1.14	VoiceTransportValues	read-write	Transport protocol to be used for incoming call control signaling. Must be chosen from among the transports supported, as indicated by VoiceService.{i}.Capabilities.SIP.Transports. Enumeration of: UDP TCP TLS SCTP
OCT voiceProfileSIPOutboundProxy	1.3.6.1.4.1.5504.2.5.40.1.3.3.1.15	OCTET STRING	read-write	Host name or IP address of the outbound proxy. If a non-empty value is specified, the SIP endpoint MUST send all SIP traffic (requests and responses) to the host indicated by this parameter and the port indicated by the OutboundProxyPort parameter. This MUST be done regardless of the routes discovered using normal SIP operations, including use of Route headers initialized from Service-Route and Record-Route headers previously received. The OutboundProxy value is NOT used to generate the URI placed into the Route header of any requests.
U32 voiceProfileSIPOutboundProxyPort	1.3.6.1.4.1.5504.2.5.40.1.3.3.1.16	Unsigned32	read-write	Destination port to be used in connecting to the outbound proxy. This parameter MUST be ignored unless the value of the OutboundProxy parameter in this object is non-empty.
OCT voiceProfileSIPOrganization	1.3.6.1.4.1.5504.2.5.40.1.3.3.1.17	OCTET STRING	read-write	Text string to be used in the Organization header.
U32 voiceProfileSIPRegistrationPeriod	1.3.6.1.4.1.5504.2.5.40.1.3.3.1.18	Unsigned32	read-write	Period over which the user agent must periodically register, in seconds.
U32 voiceProfileSIPRegisterExpires	1.3.6.1.4.1.5504.2.5.40.1.3.3.1.19	Unsigned32	read-write	Register request Expires header value, in seconds.
U32 voiceProfileSIPRegisterRetryInterval	1.3.6.1.4.1.5504.2.5.40.1.3.3.1.20	Unsigned32	read-write	Register retry interval, in seconds.
U32 voiceProfileSIPDSCPMark	1.3.6.1.4.1.5504.2.5.40.1.3.3.1.21	Unsigned32	read-write	Diffserv code point to be used for outgoing SIP signaling packets.
I32 voiceProfileSIPVLANIDMark	1.3.6.1.4.1.5504.2.5.40.1.3.3.1.22	Integer32	read-write	VLAN ID (as defined in 802.1Q) to be used for outgoing SIP signaling packets for this profile. A value of -1 indicates the default value is to be used. If either the VLANIDMark or EthernetPriorityMark are greater than zero, then the outgoing frames MUST be tagged. Otherwise, the outgoing frames MAY be tagged or untagged.
I32 voiceProfileSIPEthernetPriorityMark	1.3.6.1.4.1.5504.2.5.40.1.3.3.1.23	Integer32	read-write	Ethernet priority code (as defined in 802.1D) to be used for outgoing SIP signaling packets for this profile. A value of -1 indicates the default value is to be used. If either the VLANIDMark or EthernetPriorityMark are greater than zero, then the outgoing frames MUST be tagged. Otherwise, the outgoing frames MAY be tagged or untagged.
U32 voiceProfileSIPInterdigitTimeout	1.3.6.1.4.1.5504.2.5.40.1.3.3.1.24	Unsigned32	read-write	Interdigit timeout, in milliseconds. This the value that will be used for T in the dial string. Four Seconds is the default value before the dial string is considered complete. Fifteen seconds is the maximum.
ADR voiceProfileSIPAddressMode	1.3.6.1.4.1.5504.2.5.40.1.3.3.1.25	VoiceProfileAddressModes	read-write	Configure the SIP Client Name addressing mode. An enumeration of: ip(1) ipBracketed(2) domainName(3) Ip and IpBracketed will cause the SIP Client name to be the Bound Interface IP address. Name will allow the user to input any text field, usually a Domain Name.
voiceProfileSIPEventSubscribeTable	1.3.6.1.4.1.5504.2.5.40.1.3.4		not-accessible	Table of SIP subscriber event objects for a specific voice profile
voiceProfileSIPEventSubscribeEntry	1.3.6.1.4.1.5504.2.5.40.1.3.4.1		not-accessible	SIP subscriber events objects associated with a specific voice profile.
OCT voiceProfileSIPEventSubscribeEvent	1.3.6.1.4.1.5504.2.5.40.1.3.4.1.1	OCTET STRING	read-write	SIP event name to appear in the EVENT header of the SIP SUBSCRIBE request.
OCT voiceProfileSIPEventSubscribeNotifier	1.3.6.1.4.1.5504.2.5.40.1.3.4.1.2	OCTET STRING	read-write	Host name or IP address of the event notify server.
U32 voiceProfileSIPEventSubscribeNotifierPort	1.3.6.1.4.1.5504.2.5.40.1.3.4.1.3	Unsigned32	read-write	Destination port to be used in connecting to the event notifier.
VOI voiceProfileSIPEventSubscribeNotifierTransport	1.3.6.1.4.1.5504.2.5.40.1.3.4.1.4	VoiceTransportValues	read-write	Transport protocol to be used in connecting to the registrar server. Must be chosen from among the transports supported, as indicated by VoiceService.{i}.Capabilities.SIP.Transports. Enumeration of: UDP TCP TLS SCTP
voiceProfileMGCPTable	1.3.6.1.4.1.5504.2.5.40.1.3.5		not-accessible	Table of MGCP objects for a specific voice profile
voiceProfileMGCPEntry	1.3.6.1.4.1.5504.2.5.40.1.3.5.1		not-accessible	MGCP objects associated with a specific voice profile.
OCT voiceProfileMGCPCallAgent1	1.3.6.1.4.1.5504.2.5.40.1.3.5.1.1	OCTET STRING	read-write	Host name or IP address of the main MGCP call agent.
OCT voiceProfileMGCPUser	1.3.6.1.4.1.5504.2.5.40.1.3.5.1.2	OCTET STRING	read-write	User string used in accessing the call agent.
T/F voiceProfilePersistentNotify	1.3.6.1.4.1.5504.2.5.40.1.3.5.1.3	TruthValue	read-write	This field directs the MGCP stack to notify the switch for every hd or hu event when in the RQNT is Q:LOOP.
ADR voiceProfileMGCPAddressMode	1.3.6.1.4.1.5504.2.5.40.1.3.5.1.4	VoiceProfileAddressModes	read-write	Configure the MGCP Client Name addressing mode. An enumeration of: ip(1) ipBracketed(2) domainName(3) Ip and IpBracketed will cause the MGCP Client name to be the Bound Interface IP address. Name will allow the user to input any text field, usually a Domain Name.
voiceProfileRTPTable	1.3.6.1.4.1.5504.2.5.40.1.3.6		not-accessible	Table of RTP objects for a specific voice profile
voiceProfileRTPEntry	1.3.6.1.4.1.5504.2.5.40.1.3.6.1		not-accessible	RTP objects associated with a specific voice profile.
U32 voiceProfileRTPLocalPortMin	1.3.6.1.4.1.5504.2.5.40.1.3.6.1.1	Unsigned32	read-write	Base of port range to be used for incoming RTP streams for this profile.
U32 voiceProfileRTPLocalPortMax	1.3.6.1.4.1.5504.2.5.40.1.3.6.1.2	Unsigned32	read-write	Top of port range to be used for incoming RTP streams for this profile.
U32 voiceProfileRTPDSCPMark	1.3.6.1.4.1.5504.2.5.40.1.3.6.1.3	Unsigned32	read-write	Diffserv code point to be used for outgoing RTP packets for this profile. It is RECOMMENDED that by default the DSCP for RTP traffic be set to the value to indicate EF traffic.
U32 voiceProfileRTPTelephoneEventPayloadType	1.3.6.1.4.1.5504.2.5.40.1.3.6.1.4	Unsigned32	read-write	Payload type to be used for RTP telephone events. This parameter indicates the payload type to be used for DTMF events if RFC 2833 transmission of DTMF information is in use.
voiceProfileFaxT38Table	1.3.6.1.4.1.5504.2.5.40.1.3.7		not-accessible	Table of Fax T.38 objects for a specific voice profile
voiceProfileFaxT38Entry	1.3.6.1.4.1.5504.2.5.40.1.3.7.1		not-accessible	Fax T38 objects associated with a specific voice profile.
T/F voiceProfileFaxT38Enable	1.3.6.1.4.1.5504.2.5.40.1.3.7.1.1	TruthValue	read-write	Enable or disable the use of T.38.
U32 voiceProfileFaxT38BitRate	1.3.6.1.4.1.5504.2.5.40.1.3.7.1.2	Unsigned32	read-write	Maximum data rate for fax. Enumeration of the following values: 2400 4800 7200 9600 12000 14400 33600
U32 voiceProfileFaxT38HighSpeedPacketRate	1.3.6.1.4.1.5504.2.5.40.1.3.7.1.3	Unsigned32	read-write	The rate at which high speed data will be sent across the network in milliseconds. Enumeration of the following values: 10 20 30 40
voiceProfileLines	1.3.6.1.4.1.5504.2.5.40.1.3.8
voiceProfileLineTable	1.3.6.1.4.1.5504.2.5.40.1.3.8.1		not-accessible	Table of voice profile line objects
voiceProfileLineEntry	1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1		not-accessible	Object associated with a distinct voice line. Support for adding and removing lines is conditional on whether the CPE supports more than one line in total as indicated by VoiceService.{i}.Capabilities.MaxLineCount. By default, on creation of a given VoiceProfile, a single Line object MUST be present, initially in the disabled state. Applicable only for a VoIP endpoint.
U32 voiceProfileLineIndex	1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.1	Unsigned32	read-only	Voice Profile Line Index
VOI voiceProfileLineEnable	1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.2	VoiceProfileLineStateType	read-write	Enables or disables this line, or places it into a quiescent state. Enumeration of: Disabled Quiescent Enabled On creation, a line MUST be in the Disabled state. In the Quiescent state, in-progress sessions remain intact, but no new sessions are allowed. Support for the Quiescent state in a CPE is optional. If this parameter is set to Quiescent in a CPE that does not support the Quiescent state, it MUST treat it the same as the Disabled state (and indicate Disabled in the Status parameter).
OCT voiceProfileLineDirectoryNumber	1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.3	OCTET STRING	read-write	Directory number associated with this line. May be used to identify the line to the user. In case of H.323 signaling, this MUST be an E.164 number.
VOI voiceProfileLineStatus	1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.4	VoiceLineStatusValues	read-only	Indicates the status of this line. Enumeration of: Up Initializing Registering Unregistering Error Testing Quiescent Disabled
VOI voiceProfileLineCallState	1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.5	VoiceLineCallStateValues	read-only	Indicates the call state for this line. Enumeration of: Idle Calling Ringing Connecting InCall Hold Disconnecting
OCT voiceProfileLinePhyReferenceList	1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.6	OCTET STRING	read-write	A comma separated list of Physical Interface Identifiers that this Line is associated with. Each item corresponds to the value of the InterfaceID paraeter in a particular instance of the VoiceService.{i}.PhyInterface.{i}. table.
U32 voiceProfileLineCMAcntNum	1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.7	Unsigned32	read-write	Indicates the call manager account number associated with this line instance.
T/F voiceProfileLineOnhook	1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.8	TruthValue	read-write	State of phones Receiver. On Hook if True, OffHook if False.
ZHO voiceProfileLineRowStatus	1.3.6.1.4.1.5504.2.5.40.1.3.8.1.1.9	ZhoneRowStatus	read-write	The SNMP RowStatus of the current row.
voiceProfileLineSIPTable	1.3.6.1.4.1.5504.2.5.40.1.3.8.2		not-accessible	Table of voice profile line SIP objects
voiceProfileLineSIPEntry	1.3.6.1.4.1.5504.2.5.40.1.3.8.2.1		not-accessible	Line SIP objects associated with a specific voice profile.
OCT voiceProfileLineSIPAuthUserName	1.3.6.1.4.1.5504.2.5.40.1.3.8.2.1.1	OCTET STRING	read-write	Username used to authenticate the connection to the server.
OCT voiceProfileLineSIPAuthPassword	1.3.6.1.4.1.5504.2.5.40.1.3.8.2.1.2	OCTET STRING	read-write	Password used to authenticate the connection to the server. When read, this parameter returns an empty string, regardless of the actual value.
OCT voiceProfileLineSIPURI	1.3.6.1.4.1.5504.2.5.40.1.3.8.2.1.3	OCTET STRING	read-write	URI by which the user agent will identify itself for this line. If empty, the actual URI used in the SIP signaling SHOULD be automatically formed by the CPE as sip:UserName
OCT voiceProfileLineSIPPlarUserName	1.3.6.1.4.1.5504.2.5.40.1.3.8.2.1.4	OCTET STRING	read-write	PLAR gateway username.
voiceProfileLineMGCPTable	1.3.6.1.4.1.5504.2.5.40.1.3.8.3		not-accessible	Table of voice profile line MGCP objects
voiceProfileLineMGCPEntry	1.3.6.1.4.1.5504.2.5.40.1.3.8.3.1		not-accessible	Line MGCP objects associated with a specific voice profile.
OCT voiceProfileLineMGCPLineName	1.3.6.1.4.1.5504.2.5.40.1.3.8.3.1.1	OCTET STRING	read-write	Used to identify the line when using MGCP signaling. If empty, the CPE SHOULD use the default names aaln/1, etc.
voiceProfileLineProcessingTable	1.3.6.1.4.1.5504.2.5.40.1.3.8.4		not-accessible	Table of voice profile line processing objects
voiceProfileLineProcessingEntry	1.3.6.1.4.1.5504.2.5.40.1.3.8.4.1		not-accessible	Line Processing objects associated with a specific voice profile.
I32 voiceProfileLineTransmitGain	1.3.6.1.4.1.5504.2.5.40.1.3.8.4.1.1	Integer32	read-write	Gain in units of 0.1 dB to apply to the transmitted voice signal prior to encoding. This gain is a modifier of the default transmit-gain, which is unspecified.
I32 voiceProfileLineReceiveGain	1.3.6.1.4.1.5504.2.5.40.1.3.8.4.1.2	Integer32	read-write	Gain in units of 0.1 dB to apply to the received voice signal after decoding. This gain is a modifier of the default receive-gain, which is unspecified.
T/F voiceProfileLineEchoCancellationEnable	1.3.6.1.4.1.5504.2.5.40.1.3.8.4.1.3	TruthValue	read-write	Enable or disable echo cancellation for this line.
T/F voiceProfileLineEchoCancellationInUse	1.3.6.1.4.1.5504.2.5.40.1.3.8.4.1.4	TruthValue	read-only	Indication of whether or not echo cancellation is currently in use for this line.
voiceProfileLineCodecTable	1.3.6.1.4.1.5504.2.5.40.1.3.8.5		not-accessible	Table of voice profile CODEC objects, per line
voiceProfileLineCodecEntry	1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1		not-accessible	The Voice Line CODEC list MUST include a distinct entry for each supported combination of these parameters.
U32 voiceProfileLineCodecIndex	1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1.1	Unsigned32	read-only	Unique identifier for each entry in this table. The value MUST match that of the corresponding entry in the VoiceService.{i}.Capabilities.Codecs table.
U32 voiceProfileLineCodecEntryID	1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1.2	Unsigned32	read-only	Unique identifier for each entry in this table. The value MUST match that of the corresponding entry in the VoiceService.{i}.Capabilities.Codecs table.
OCT voiceProfileLineCodec	1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1.3	OCTET STRING	read-only	Identifier of the codec type. The value MUST match that of the corresponding entry in the VoiceService.{i}.Capabilities.Codecs table.
U32 voiceProfileLineCodecBitRate	1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1.4	Unsigned32	read-only	Bit rate, in bits per second. The value MUST match that of the corresponding entry in the VoiceService.{i}.Capabilities.Codecs table.
OCT voiceProfileLineCodecPacketizationPeriod	1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1.5	OCTET STRING	read-write	Comma-separate list of supported packetization periods, in milliseconds, or continuous ranges of packetization periods as defined in VoiceService.{i}.Capabilities.Codecs.PacketizationPeriod. The set of packetization periods may be restricted by modifying the value of this parameter to a more restricted set of values than is listed in VoiceService.{i}.Capabilities.Codecs.PacketizationPeriod. The CPE MUST ignore any values or portions of ranges outside of those specified in VoiceService.{i}.Capabilities.Codecs.Packetization.Period.
T/F voiceProfileLineCodecSilenceSuppression	1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1.6	TruthValue	read-write	Indicates support for silence suppression for this codec. If silence suppression is supported, it can be disabled for this codec/bit-rate by setting this parameter to false.
T/F voiceProfileLineCodecEnable	1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1.7	TruthValue	read-write	Enable or disable the use of this combination of codec parameters.
U32 voiceProfileLineCodecPriority	1.3.6.1.4.1.5504.2.5.40.1.3.8.5.1.8	Unsigned32	read-write	Indicates the priority for this combination of codec parameters, where 1 is the highest priority. Where the priority differs between entries in this table, the CPE SHOULD use the highest priority (lowest numbered) entry among those supported by the remote endpoint and consistent with the available bandwidth. Where the priorities are equal among multiple entries, the CPE MAY apply a local criterion for choosing among them.
voiceProfileLineCallingFeaturesTable	1.3.6.1.4.1.5504.2.5.40.1.3.8.6		not-accessible	Table of voice calling features, per line
voiceProfileLineCallingFeaturesEntry	1.3.6.1.4.1.5504.2.5.40.1.3.8.6.1		not-accessible	The list of voice line calling features supported.
T/F voiceProfileLineCallingFeatureCallerIDEnable	1.3.6.1.4.1.5504.2.5.40.1.3.8.6.1.1	TruthValue	read-write	Enable or disable the transmission of caller ID information on outgoing calls.
OCT voiceProfileLineCallingFeatureCallerIDName	1.3.6.1.4.1.5504.2.5.40.1.3.8.6.1.2	OCTET STRING	read-write	String used to identify the caller.
T/F voiceProfileLineCallingFeatureCallWaitingEnable	1.3.6.1.4.1.5504.2.5.40.1.3.8.6.1.3	TruthValue	read-write	Enable or disable call waiting in the endpoint.
U32 voiceProfileLineCallingFeatureMaxSessions	1.3.6.1.4.1.5504.2.5.40.1.3.8.6.1.4	Unsigned32	read-only	Indicates the maximum number of simultaneous sessions that may be conferenced together by the endpoint. For example, to enable three way conferencing, set the value of this object to 2. This value SHOULD be less than the value of VoiceService.{i}.Capabilities.maxSessionsPerLine.
T/F voiceProfileLineCallingFeatureMWIEnable	1.3.6.1.4.1.5504.2.5.40.1.3.8.6.1.5	TruthValue	read-write	Enable or disable call waiting in the endpoint.
voiceProfileLineStatsTable	1.3.6.1.4.1.5504.2.5.40.1.3.8.7		not-accessible	Table of voice profile line statistics objects
voiceProfileLineStatsEntry	1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1		not-accessible	Line statistics objects associated with a specific voice profile.
U32 voiceProfileLineStatsPacketsSent	1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.1	Unsigned32	read-only	Total number of RTP Packets sent for this voice line.
U32 voiceProfileLineStatsPacketsReceived	1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.2	Unsigned32	read-only	Total number of RTP Packets received for this voice line.
U32 voiceProfileLineStatsBytesSent	1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.3	Unsigned32	read-only	Total number of RTP Bytes sent for this voice line.
U32 voiceProfileLineStatsBytesReceived	1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.4	Unsigned32	read-only	Total number of RTP Bytes received for this voice line.
U32 voiceProfileLineStatsPacketsLost	1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.5	Unsigned32	read-only	Total number of RTP Packets lost for this voice line.
U32 voiceProfileLineStatsIncomingCallsReceived	1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.6	Unsigned32	read-only	Total incoming calls received.
U32 voiceProfileLineStatsIncomingCallsAnswered	1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.7	Unsigned32	read-only	Total incoming calls answered.
U32 voiceProfileLineStatsIncomingCallsConnected	1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.8	Unsigned32	read-only	Total incoming calls connected.
U32 voiceProfileLineStatsIncomingCallsFailed	1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.9	Unsigned32	read-only	Total incoming calls failed.
U32 voiceProfileLineStatsOutgoingCallsAttempted	1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.10	Unsigned32	read-only	Total outgoing calls attempted.
U32 voiceProfileLineStatsOutgoingCallsAnswered	1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.11	Unsigned32	read-only	Total outgoing calls answered.
U32 voiceProfileLineStatsOutgoingCallsConnected	1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.12	Unsigned32	read-only	Total outgoing calls connected.
U32 voiceProfileLineStatsOutgoingCallsFailed	1.3.6.1.4.1.5504.2.5.40.1.3.8.7.1.13	Unsigned32	read-only	Total outgoing calls failed.
zhnVoiceConformance	1.3.6.1.4.1.5504.2.5.40.2
zhnVoiceGroups	1.3.6.1.4.1.5504.2.5.40.2.1
zhnVoiceServiceGroup	1.3.6.1.4.1.5504.2.5.40.2.1.1			A collection of Zhone Voice objects that describe the voice services of the device.
zhnVoiceCapabilitiesGroup	1.3.6.1.4.1.5504.2.5.40.2.1.2			A collection of Zhone Voice objects that describe the voice capabilities of the device.
zhnVoiceCapabilitiesSIPGroup	1.3.6.1.4.1.5504.2.5.40.2.1.3			A collection of Zhone Voice objects that describe the voice SIP or SIP PLAR capabilities of the device.
zhnVoiceCapabilitiesMGCPGroup	1.3.6.1.4.1.5504.2.5.40.2.1.4			A collection of Zhone Voice objects that describe the voice MGCP capabilities of the device.
zhnVoiceCapabilitiesCodecsGroup	1.3.6.1.4.1.5504.2.5.40.2.1.5			A collection of Zhone Voice objects that identify the set of supported codecs.
zhnVoiceProfileGroup	1.3.6.1.4.1.5504.2.5.40.2.1.6			A collection of Zhone Voice objects that describe a voice profile.
zhnVoiceProfileServiceProviderGroup	1.3.6.1.4.1.5504.2.5.40.2.1.7			A collection of Zhone Voice Profile objects that describe a service provider.
zhnVoiceProfileSIPGroup	1.3.6.1.4.1.5504.2.5.40.2.1.8			A collection of Zhone Voice Profile objects that describe SIP information.
zhnVoiceProfileSIPEventSubscribeGroup	1.3.6.1.4.1.5504.2.5.40.2.1.9			A collection of Zhone Voice Profile objects that describe SIP subscriber events information.
zhnVoiceProfileMGCPEntry	1.3.6.1.4.1.5504.2.5.40.2.1.10			A collection of Zhone Voice Profile objects that describe MGCP information.
zhnVoiceProfileRTPEntry	1.3.6.1.4.1.5504.2.5.40.2.1.11			A collection of Zhone Voice Profile objects that describe Real-time Transport Protocol (RTP) information.
zhnVoiceProfileFaxT38Entry	1.3.6.1.4.1.5504.2.5.40.2.1.12			A collection of Zhone Voice Profile objects that describe FAX T.38 information.
zhnVoiceProfileLineGroup	1.3.6.1.4.1.5504.2.5.40.2.1.13			A collection of Zhone Voice objects that describe physical line information for a voice profile.
zhnVoiceProfileLineProcessingGroup	1.3.6.1.4.1.5504.2.5.40.2.1.14			A collection of Zhone Voice objects that describe physical line processing information for a voice profile.
zhnVoiceProfileLineSIPGroup	1.3.6.1.4.1.5504.2.5.40.2.1.15			A collection of Zhone Voice objects that describe voice line information specific to SIP call signaling for a voice profile.
zhnVoiceProfileLineMGCPGroup	1.3.6.1.4.1.5504.2.5.40.2.1.16			A collection of Zhone Voice objects that describe voice line information specific to MGCP call signaling for a voice profile.
zhnVoiceProfileLineCodecsGroup	1.3.6.1.4.1.5504.2.5.40.2.1.17			A collection of Zhone Voice objects that describe voice line CODECS information.
zhnVoiceLineCallingFeaturesGroup	1.3.6.1.4.1.5504.2.5.40.2.1.18			A collection of optionable, configurable Zhone Voice Line calling features.
zhnVoiceNotificationGroup	1.3.6.1.4.1.5504.2.5.40.2.1.19			Collection of objects for controlling the Zhone Voice notifications.
zhnVoiceProfileLineStatsGroup	1.3.6.1.4.1.5504.2.5.40.2.1.20			A collection of statistics, per Zhone Voice Line.
zhnVoiceCompliances	1.3.6.1.4.1.5504.2.5.40.2.2
zhnVoiceCompliance	1.3.6.1.4.1.5504.2.5.40.2.2.1			The Compliance statement for SNMP entities which manage display the Zhone CPE Voice Information

RFC description

Zhone VoIP CPE voice management including profiles, SIP/MGCP configuration, call statistics, and voice registration.

Start monitoring Zhone Technologies VoIP access devices with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ZHNVOICE

What Is ZHNVOICE?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description